arXiv subjects

Vasilis K. Papanikolaou

Publications and source records attributed to Vasilis K. Papanikolaou.

16 recordsLinked to original sources

arXiv2026

Secure Near-Field ISAC with Pinching-Antenna Systems: Exploiting Constructive-Destructive Interference

This paper investigates secure near-field integrated sensing and communication (ISAC) with pinching-antenna systems (PASS), where a base station serves legitimate users while localizing a target that may also eavesdrop on the transmitted data. We jointly design symbol-level precoding (SLP) and the transmit and receive pinching-antenna positions to minimize the Cartesian position error bound (PEB) averaged over the data symbols. Constructive interference ensures reliable reception at the legitimate users, whereas destructive interference drives the target's observation toward incorrect symbol regions without sacrificing the illumination required for sensing. We derive the PEB for unknown complex target reflectivity and establish an exact factorization into transmit-illumination and receive-geometry terms. This decomposition reveals the distinct sensing roles of the two apertures, enables separate receive-placement and joint transmit-placement/SLP optimization, and provides analytical insights into local position identifiability, the range-information limitations of compact arrays, sensing-oriented receive placement, and in-waveguide attenuation. Building on these results, we develop an efficient algorithm by combining geometry-informed receive initialization, one-dimensional transmit-position searches, and convex per-symbol precoding. Numerical results demonstrate sub-millimeter localization, erroneous symbol decisions at the target, an expanded feasible operating region, and substantial gains over fixed-placement PASS and fully digital extremely large-scale MIMO (XL-MIMO) benchmarks.

eess.SP↗

arXiv2026

Statistical Channel Model for FSO Systems Assisted by a UAV-Mounted IRS

Integrating optical intelligent reflecting surfaces (IRSs) into aerial platforms, such as unmanned aerial vehicles (UAVs), has been proposed to relax the line-of-sight (LoS) constraint, extend coverage, and enhance deployment flexibility of free space optical (FSO) systems. However, misalignment errors induced by the UAV hovering, in both position and orientation, may degrade connectivity and impair the end-to-end channel quality. In this paper, we develop novel expressions for the electric fields incident on and reflected by an optical IRS, based on the Huygens-Fresnel principle. The resulting expressions are applicable for any combination of incident and reflected propagation directions. Building on this framework, we derive a closed-form statistical channel model that captures the geometric and misalignment losses of an FSO link assisted by a UAV-mounted IRS in the presence of random UAV fluctuations. In particular, we develop a statistical model for the beam misalignment at the receiver lens, assuming Gaussian fluctuations in both the UAV position and orientation. The proposed analytical model is validated through Monte Carlo (MC) simulations and is further used to provide practical design guidelines regarding the optimal placement of the UAV-mounted IRS for the minimization of the outage probability.

eess.SP↗

arXiv2026

CMT-Aware Channel Modeling and Transmit-Power Minimization for Pinching-Antenna Systems

This letter investigates transmit-power minimization for multiuser pinching-antenna system (PAS) from a coupled-mode-theory (CMT)-aware perspective. Existing CMT-based pinching antenna (PA) studies reveal coupling-induced power exchange and radiation behavior, but these effects have not been fully embedded into system-level multi-PA channel modeling and beamforming design. We therefore develop a directional and loss-aware channel model that captures coupling-length-dependent power extraction and the downstream guided-power reduction caused by in-waveguide attenuation and upstream extraction. The model shows that PA design should account for both directional radiation and guided-power evolution, rather than only propagation distance or maximum coupling considered in most existing works. Based on this channel model, we formulate a quality-of-service (QoS)-constrained power minimization problem for continuous PA positioning and finite-codebook activation. For each candidate coupling length, the element-wise positioning and BPSO-based activation use a closed-form zero-forcing (ZF) power metric for low-complexity configuration ranking, thereby avoiding repeated beamforming optimization while excluding rank-deficient candidates and ordering the remaining ones. The selected configuration for each coupling length is then evaluated by optimal fixed-configuration QoS beamforming. Simulation results demonstrate that CMT-aware modeling fundamentally reshapes the preferred PA configuration, maximum coupling is not always power-efficient due to suppressed downstream PA contributions, and finite-codebook activation combined with ZF-based ranking provides a balance between transmit-power performance and deployment complexity.

eess.SP↗

arXiv2026

Reliable ORIS-assisted FSO Communications via HARQ

This paper studies a free-space optical (FSO) link assisted by an optical reconfigurable intelligent surface (ORIS) and enhanced by a hybrid automatic repeat request (HARQ) scheme. The ORIS creates a virtual line-of-sight path around obstacles, while HARQ recovers frames corrupted by turbulence, pointing jitter, and geometric loss through retransmission and combining. We first derive a tractable statistical model for the end-to-end transmitter-ORIS-receiver (Tx-ORIS-Rx) reflected channel by jointly accounting for atmospheric turbulence, ORIS-induced pointing errors, and geometric attenuation. Building on these results, we obtain closed-form outage probability (OP) expressions for HARQ with Chase combining (HARQ-CC) and analytical outage upper bounds for HARQ with incremental redundancy (HARQ-IR), valid for an arbitrary maximum number of transmission rounds. We further conduct a high signal-to-noise ratio (SNR) analysis that provides a thorough characterization of the outage behavior and reveals the diversity order of both schemes. In addition, we characterize the delay behavior of the truncated HARQ process through the mean number of transmission rounds and the conditional mean number of rounds given successful decoding. Finally, numerical and Monte Carlo results validate the proposed analysis and show that HARQ substantially improves ORIS-assisted FSO reliability, with HARQ-IR achieving lower outage and delay than HARQ-CC, even for a small number of retransmission rounds.

eess.SP↗

arXiv2026

Closed-form Model for Radiation Pattern of Pinching Antennas

In this article, we develop an analytical radiation-pattern model for pinching-antenna systems (PASS) based on a two-dimensional dielectric slab waveguide. The model is derived in two steps. First, we employ coupled-mode theory (CMT) to derive a closed-form expression for the field coupled into the pinching antennas (PAs). Second, we use this analytical field profile as a scattering source model and derive the far-field radiation pattern via a two-dimensional radiation integral. We validate the proposed model against full-wave finite-element simulations performed in COMSOL Multiphysics, showing that it accurately reproduces the directional radiation characteristics of PASS. In contrast, most existing works model PAs as omni-directional point radiators, which simplifies system-level analysis but does not accurately capture the underlying electromagnetic radiation mechanism. Because the proposed model is given in closed form, it can be easily integrated into existing system-level PASS models to replace the assumed omni-directional pattern with a physically motivated directional radiation pattern. Finally, numerical simulations quantify the performance degradation that arises when the directional behavior of PAs is neglected in a representative wireless communications scenario.

eess.SP↗

arXiv2026

Clustered Movable Pinching Antennas: Realizing Beamforming Gains and Target Diversity in ISAC Systems with Look-Angle-Dependent RCS

We investigate a novel integrated sensing and communication (ISAC) system enabled by pinching antennas (PAs), which are dynamically activated along a dielectric waveguide. Unlike prior designs, the PAs are organized into multiple clusters of movable antennas. The movement of the antennas within each cluster enables transmit beamforming, while the spatial separation of different clusters allows the system to illuminate the target from multiple angular perspectives.

eess.SP↗

arXiv2025

Resolving the Double Near-Far Problem via Wireless Powered Pinching-Antenna Networks

This letter introduces a novel wireless powered communication system, referred to as a wireless powered pinching-antenna network (WPPAN), utilizing a single waveguide with pinching antennas to address the double near-far problem inherent in wireless powered networks. In the proposed WPPAN, users harvest energy from spatially distributed pinching antennas in the downlink and use the collected power to transmit messages in the uplink. Furthermore, to manage the combinatorial complexity associated with activating the pinching antennas, we propose three approaches of varying complexity to simplify the original resource allocation problem and then solve it efficiently using convex optimization methods. Simulation results confirm that the proposed WPPAN system effectively mitigates the double near-far problem by providing antenna resources closer to the users, thereby enhancing both downlink energy harvesting and uplink data transmission.

eess.SP↗

arXiv2025

Pinching Antenna-enabled ISAC Systems: Exploiting Look-Angle Dependence of RCS for Target Diversity

We investigate a novel integrated sensing and communication (ISAC) system supported by pinching antennas (PAs), which can be dynamically activated along a dielectric waveguide to collect spatially diverse observations. This capability allows different PAs to view the same target from different angles across time, thereby introducing target diversity, which is a key advantage over conventional fixed antenna arrays. To quantify the sensing reliability, we adopt the outage probability as a performance metric, capturing the likelihood that the accumulated radar echo signal power falls below a detection threshold. In contrast to traditional ISAC models that assume deterministic sensing channels, we explicitly account for the look-angle dependence of radar cross-section (RCS) by modeling it as a random variable. We ensure the long-term quality-of-service (QoS) for communication users by enforcing an accumulated data rate constraint over time. We derive an exact closed-form expression for the sensing outage probability based on the distribution of weighted sums of exponentially distributed random variables. Since the resulting expression is highly non-convex and intractable for optimization, we use a tractable upper bound based on the Chernoff inequality and formulate a PA activation optimization problem. A successive convex approximation (SCA) framework is proposed to efficiently solve the formulated problem. Numerical results show that dynamically activating different PAs across time slots significantly enhances sensing reliability compared to repeatedly activating the same PA at a fixed position and conventional antenna selection schemes, respectively. These findings highlight the benefits of integrating outage-based reliability metrics and target diversity into ISAC systems using PAs.

eess.SP↗

arXiv2025

Cramér-Rao Bounds for Integrated Sensing and Communications in Pinching-Antenna Systems

Pinching-antenna systems (PASs) have recently emerged as a flexible, cost-effective route to large-scale antenna deployments envisioned for integrated sensing and communications (ISAC). This paper establishes the fundamental sensing limits of a bistatic PAS link by deriving closed-form Cramér-Rao lower bounds for the joint estimation of range and direction when a target is illuminated by pinching antennas placed along a dielectric waveguide and observed by a uniform linear array receiver. By rigorously preserving the amplitude and phase variations of each pinching antenna, as well as exploiting their non-uniform deployment, we gain valuable insights into the performance gain of PASs over conventional antenna arrays. Numerical results validate that the PAS-based ISAC can achieve centimeter-level ranging and sub-degree angular resolution with significantly fewer hardware resources than conventional uniform linear arrays. The derived bounds provide practical design guidelines for next-generation PAS-enabled ISAC systems.

eess.SP↗

arXiv2024

Location-Driven Programmable Wireless Environments through Light-emitting RIS (LeRIS)

As 6G wireless networks seek to enable robust and dynamic programmable wireless environments (PWEs), reconfigurable intelligent surfaces (RISs) have emerged as a cornerstone for controlling electromagnetic wave propagation. However, realizing the potential of RISs for demanding PWE applications depends on precise and real-time user localization, especially in scenarios with random receiver orientations and inherent hardware imperfections. To address this challenge, we propose a novel optical localization framework that integrates conventional ceiling-mounted LEDs with light-emitting reconfigurable intelligent surfaces (LeRISs). By leveraging the spatial diversity offered by the LeRIS architecture, the framework introduces robust signal paths that improve localization accuracy and reduce errors under varying orientations. To this end, we derive a system of equations for received signal strength-based localization that accounts for random receiver orientations and imposes spatial constraints on LED placement, ensuring unique and reliable solutions. Finally, our simulation results demonstrate that the proposed framework achieves precise beam control and high spectral efficiency even for RISs with large number of reflecting elements, establishing our solution as scalable and adaptive for PWEs that require real-time accuracy and flexibility.

cs.NI↗

arXiv2024

Empowering Programmable Wireless Environments with Optical Anchor-based Positioning

The evolution toward sixth-generation (6G) wireless networks has introduced programmable wireless environments (PWEs) and reconfigurable intelligent surfaces (RISs) as transformative elements for achieving near-deterministic wireless communications. However, the enhanced capabilities of RISs within PWEs, especially as we move toward more complex electromagnetic functions by increasing the number of reflecting elements, underscore the need for high-precision user localization, since inaccurate localization could lead to erroneous configuration of RISs, which would then compromise the effectiveness of PWEs. In this direction, this paper investigates the integration of RISs and optical anchors within PWEs, emphasizing the crucial role of ultra-precise localization in unlocking advanced electromagnetic functionalities. Specifically, we present an in-depth analysis of various localization techniques, both RISbased and RIS-independent, while introducing the concept of empowering PWEs with optical anchors for enhanced localization precision. Our findings highlight that accurate localization is essential to fully exploit the capabilities of RISs, paving the way for future applications. Through this exploration, we contribute to the advancement of PWEs in line with the ambitious goals of the 6G standards and improve the quality of service in next generation wireless networks.

cs.IT↗

arXiv2024

Zero-Energy Reconfigurable Intelligent Surfaces (zeRIS)

A primary objective of the forthcoming sixth generation (6G) of wireless networking is to support demanding applications, while ensuring energy efficiency. Programmable wireless environments (PWEs) have emerged as a promising solution, leveraging reconfigurable intelligent surfaces (RISs), to control wireless propagation and deliver exceptional quality-ofservice. In this paper, we analyze the performance of a network supported by zero-energy RISs (zeRISs), which harvest energy for their operation and contribute to the realization of PWEs. Specifically, we investigate joint energy-data rate outage probability and the energy efficiency of a zeRIS-assisted communication system by employing three harvest-and-reflect (HaR) methods, i) power splitting, ii) time switching, and iii) element splitting. Furthermore, we consider two zeRIS deployment strategies, namely BS-side zeRIS and UE-side zeRIS. Simulation results validate the provided analysis and examine which HaR method performs better depending on the zeRIS placement. Finally, valuable insights and conclusions for the performance of zeRISassisted wireless networks are drawn from the presented results.

cs.IT↗

arXiv2024

100 Gbps Indoor Access and 4.8 Gbps Outdoor Point-to-Point LiFi Transmission Systems using Laser-based Light Sources

In this paper, we demonstrate the communication capabilities of light-fidelity (LiFi) systems based on highbrightness and high-bandwidth integrated laser-based sources in a surface mount device (SMD) packaging platform. The laserbased source is able to deliver 450 lumens of white light illumination and the resultant light brightness is over 1000 cd mm2. It is demonstrated that a wavelength division multiplexing (WDM) LiFi system with ten parallel channels is able to deliver over 100 Gbps data rate with the assistance of Volterra filter-based nonlinear equalisers. In addition, an aggregated transmission data rate of 4.8 Gbps has been achieved over a link distance of 500 m with the same type of SMD light source. This work demonstrates the scalability of LiFi systems that employ laserbased light sources, particularly in their capacity to enable highspeed short range, as well as long-range data transmission.

eess.SY↗

arXiv2023

Accurate EH Modelling and Achievable Information Rate for SLIPT Systems with Multi-Junction Photovoltaic Receivers

In this paper, we study optical simultaneous lightwave information and power transfer (SLIPT) systems employing photovoltaic optical receivers (RXs). To be able to efficiently harvest energy from broadband light, we propose to employ multi-junction photovoltaic cells at the optical RX. We consider the case, where the optical RX is illuminated by ambient light, an intensity-modulated information free space optical (FSO) signal, and since the ambient light may not be always present, a dedicated energy-providing broadband optical signal. Based on the analysis of the equivalent electrical circuit of the multi-junction photovoltaic RX, we model the current flow through the photovoltaic cell and derive a novel accurate and two novel approximate energy harvesting (EH) models for the two cases, where the optical RX is equipped with a single and multiple p-n junctions, respectively. We derive the optimal distribution of the transmit information signal that maximizes the achievable information rate. We validate the proposed EH models by circuit simulations and show that the photovoltaic RXs saturate for high received signal powers. For single-junction RXs, we compare the proposed EH model with two well-known baseline models and demonstrate that, in contrast to the proposed EH model, they are not able to fully capture the RX non-linearity. Since multi-junction RXs allow a more efficient allocation of the optical power, they are more robust against saturation, and thus, are able to harvest significantly more power and achieve higher data rates than RXs employing a single p-n junction. Finally, we highlight a tradeoff between the information rate and harvested power in SLIPT systems and demonstrate that the proposed optimal distribution yields significantly higher achievable information rates compared to uniformly distributed transmit signals, which are optimal for linear optical information RXs.

eess.SP↗

arXiv2023

EH Modelling and Achievable Rate for FSO SWIPT Systems with Non-linear Photovoltaic Receivers

In this paper, we study optical simultaneous wireless information and power transfer (SWIPT) systems, where a photovoltaic optical receiver (RX) is illuminated by ambient light and an intensity-modulated free space optical (FSO) signal. To facilitate simultaneous information reception and energy harvesting (EH) at the RX, the received optical signal is first converted to an electrical signal, and then, its alternating current (AC) and direct current (DC) components are separated and utilized for information decoding and EH, respectively. By accurately analysing the equivalent electrical circuit of the photovoltaic RX, we model the current flow through the photovoltaic p-n junction in both the low and high input power regimes using a two-diode model of the p-n junction and we derive a closed-form non-linear EH model that characterizes the harvested power at the RX. Furthermore, taking into account the non-linear behaviour of the photovoltaic RX on information reception, we derive the optimal distribution of the transmit information signal that maximizes the achievable information rate. The proposed EH model is validated by circuit simulation results. Furthermore, we compare with two baseline models based on maximum power point (MPP) tracking at the RX and a single-diode p-n junction model, respectively, and demonstrate that in contrast to the proposed EH model, they are not able to fully capture the non-linearity of photovoltaic optical RXs. Finally, our numerical results highlight that the proposed optimal distribution of the transmit signal yields significantly higher achievable information rates compared to uniformly distributed transmit signals, which are optimal for linear optical information RXs.

cs.IT↗

arXiv2020

Machine Learning in Nano-Scale Biomedical Engineering

Machine learning (ML) empowers biomedical systems with the capability to optimize their performance through modeling of the available data extremely well, without using strong assumptions about the modeled system. Especially in nano-scale biosystems, where the generated data sets are too vast and complex to mentally parse without computational assist, ML is instrumental in analyzing and extracting new insights, accelerating material and structure discoveries, and designing experience as well as supporting nano-scale communications and networks. However, despite these efforts, the use of ML in nano-scale biomedical engineering remains still under-explored in certain areas and research challenges are still open in fields such as structure and material design and simulations, communications and signal processing, and bio-medicine applications. In this article, we review the existing research regarding the use of ML in nano-scale biomedical engineering. In more detail, we first identify and discuss the main challenges that can be formulated as ML problems. These challenges are classified into the three aforementioned main categories. Next, we discuss the state of the art ML methodologies that are used to countermeasure the aforementioned challenges. For each of the presented methodologies, special emphasis is given to its principles, applications, and limitations. Finally, we conclude the article with insightful discussions, that reveal research gaps and highlight possible future research directions.

cs.LG↗