arXiv subjects

Vera Konyves

Publications and source records attributed to Vera Konyves.

15 recordsLinked to original sources

arXiv2024

A Tale of Three: Magnetic Fields along the Orion Integral-Shaped Filament as Revealed by JCMT BISTRO survey

As part of the BISTRO survey, we present JCMT 850 $μ$m polarimetric observations towards the Orion Integral-Shaped Filament (ISF) that covers three portions known as OMC-1, OMC-2, and OMC-3. The magnetic field threading the ISF seen in the JCMT POL-2 map appears as a tale of three: pinched for OMC-1, twisted for OMC-2, and nearly uniform for OMC-3. A multi-scale analysis shows that the magnetic field structure in OMC-3 is very consistent at all the scales, whereas the field structure in OMC-2 shows no correlation across different scales. In OMC-1, the field retains its mean orientation from large to small scales, but shows some deviations at small scales. Histograms of relative orientations between the magnetic field and filaments reveal a bimodal distribution for OMC-1, a relatively random distribution for OMC-2, and a distribution with a predominant peak at 90$^\circ$ for OMC-3. Furthermore, the magnetic fields in OMC-1 and OMC-3 both appear to be aligned perpendicular to the fibers, which are denser structures within the filament, but the field in OMC-2 is aligned along with the fibers. All these suggest that gravity, turbulence, and magnetic field are each playing a leading role in OMC-1, 2, and 3, respectively. While OMC-2 and 3 have almost the same gas mass, density, and non-thermal velocity dispersion, there are on average younger and fewer young stellar objects in OMC-3, providing evidence that a stronger magnetic field will induce slower and less efficient star formation in molecular clouds.

astro-ph.GA↗

arXiv2023

The JCMT BISTRO Survey: Studying the Complex Magnetic Field of L43

We present observations of polarized dust emission at 850 $μ$m from the L43 molecular cloud which sits in the Ophiuchus cloud complex. The data were taken using SCUBA-2/POL-2 on the James Clerk Maxwell Telescope as a part of the BISTRO large program. L43 is a dense ($N_{\rm H_2}\sim 10^{22}$-10$^{23}$ cm$^{-2}$) complex molecular cloud with a submillimetre-bright starless core and two protostellar sources. There appears to be an evolutionary gradient along the isolated filament that L43 is embedded within, with the most evolved source closest to the Sco OB2 association. One of the protostars drives a CO outflow that has created a cavity to the southeast. We see a magnetic field that appears to be aligned with the cavity walls of the outflow, suggesting interaction with the outflow. We also find a magnetic field strength of up to $\sim$160$\pm$30 $μ$G in the main starless core and up to $\sim$90$\pm$40 $μ$G in the more diffuse, extended region. These field strengths give magnetically super- and sub-critical values respectively and both are found to be roughly trans-Alfvénic. We also present a new method of data reduction for these denser but fainter objects like starless cores.

astro-ph.GA↗

arXiv2023

First BISTRO observations of the dark cloud Taurus L1495A-B10: the role of the magnetic field in the earliest stages of low-mass star formation

We present BISTRO Survey 850 μm dust emission polarisation observations of the L1495A-B10 region of the Taurus molecular cloud, taken at the JCMT. We observe a roughly triangular network of dense filaments. We detect 9 of the dense starless cores embedded within these filaments in polarisation, finding that the plane-of-sky orientation of the core-scale magnetic field lies roughly perpendicular to the filaments in almost all cases. We also find that the large-scale magnetic field orientation measured by Planck is not correlated with any of the core or filament structures, except in the case of the lowest-density core. We propose a scenario for early prestellar evolution that is both an extension to, and consistent with, previous models, introducing an additional evolutionary transitional stage between field-dominated and matter-dominated evolution, observed here for the first time. In this scenario, the cloud collapses first to a sheet-like structure. Uniquely, we appear to be seeing this sheet almost face-on. The sheet fragments into filaments, which in turn form cores. However, the material must reach a certain critical density before the evolution changes from being field-dominated to being matter-dominated. We measure the sheet surface density and the magnetic field strength at that transition for the first time and show consistency with an analytical prediction that had previously gone untested for over 50 years (Mestel 1965).

astro-ph.GA↗

arXiv2022

JCMT BISTRO Observations: Magnetic Field Morphology of Bubbles Associated with NGC 6334

We study the HII regions associated with the NGC 6334 molecular cloud observed in the sub-millimeter and taken as part of the B-fields In STar-forming Region Observations (BISTRO) Survey. In particular, we investigate the polarization patterns and magnetic field morphologies associated with these HII regions. Through polarization pattern and pressure calculation analyses, several of these bubbles indicate that the gas and magnetic field lines have been pushed away from the bubble, toward an almost tangential (to the bubble) magnetic field morphology. In the densest part of NGC 6334, where the magnetic field morphology is similar to an hourglass, the polarization observations do not exhibit observable impact from HII regions. We detect two nested radial polarization patterns in a bubble to the south of NGC 6334 that correspond to the previously observed bipolar structure in this bubble. Finally, using the results of this study, we present steps (incorporating computer vision; circular Hough Transform) that can be used in future studies to identify bubbles that have physically impacted magnetic field lines.

astro-ph.GA↗

arXiv2022

The JCMT BISTRO-2 Survey: Magnetic Fields of the Massive DR21 Filament

We present 850 $μ$m dust polarization observations of the massive DR21 filament from the B-fields In STar-forming Region Observations (BISTRO) survey, using the POL-2 polarimeter and the SCUBA-2 camera on the James Clerk Maxwell Telescope. We detect ordered magnetic fields perpendicular to the parsec-scale ridge of the DR21 main filament. In the sub-filaments, the magnetic fields are mainly parallel to the filamentary structures and smoothly connect to the magnetic fields of the main filament. We compare the POL-2 and Planck dust polarization observations to study the magnetic field structures of the DR21 filament on 0.1--10 pc scales. The magnetic fields revealed in the Planck data are well aligned with those of the POL-2 data, indicating a smooth variation of magnetic fields from large to small scales. The plane-of-sky magnetic field strengths derived from angular dispersion functions of dust polarization are 0.6--1.0 mG in the DR21 filament and $\sim$ 0.1 mG in the surrounding ambient gas. The mass-to-flux ratios are found to be magnetically supercritical in the filament and slightly subcritical to nearly critical in the ambient gas. The alignment between column density structures and magnetic fields changes from random alignment in the low-density ambient gas probed by Planck to mostly perpendicular in the high-density main filament probed by JCMT. The magnetic field structures of the DR21 filament are in agreement with MHD simulations of a strongly magnetized medium, suggesting that magnetic fields play an important role in shaping the DR21 main filament and sub-filaments.

astro-ph.GA↗

arXiv2020

Observations of magnetic fields surrounding LkH$α$ 101 taken by the BISTRO survey with JCMT-POL-2

We report the first high spatial resolution measurement of magnetic fields surrounding LkH$α$ 101, a part of the Auriga-California molecular cloud. The observations were taken with the POL-2 polarimeter on the James Clerk Maxwell Telescope within the framework of the B-fields In Star-forming Region Observations (BISTRO) survey. Observed polarization of thermal dust emission at 850 $μ$m is found to be mostly associated with the red-shifted gas component of the cloud. The magnetic field displays a relatively complex morphology. Two variants of the Davis-Chandrasekhar-Fermi method, unsharp masking and structure function, are used to calculate the strength of magnetic fields in the plane of the sky, yielding a similar result of $B_{\rm POS}\sim 115$ $\mathrmμ$G. The mass-to-magnetic-flux ratio in critical value units, $λ\sim0.3$, is the smallest among the values obtained for other regions surveyed by POL-2. This implies that the LkH$α$ 101 region is sub-critical and the magnetic field is strong enough to prevent gravitational collapse. The inferred $δB/B_0\sim 0.3$ implies that the large scale component of the magnetic field dominates the turbulent one. The variation of the polarization fraction with total emission intensity can be fitted by a power-law with an index of $α=0.82\pm0.03$, which lies in the range previously reported for molecular clouds. We find that the polarization fraction decreases rapidly with proximity to the only early B star (LkH$α$ 101) in the region. The magnetic field tangling and the joint effect of grain alignment and rotational disruption by radiative torques are potential of explaining such a decreasing trend.

astro-ph.GA↗

arXiv2020

The JCMT BISTRO Survey: Magnetic Fields Associated with a Network of Filaments in NGC 1333

We present new observations of the active star-formation region NGC 1333 in the Perseus molecular cloud complex from the James Clerk Maxwell Telescope B-Fields In Star-forming Region Observations (BISTRO) survey with the POL-2 instrument. The BISTRO data cover the entire NGC 1333 complex (~1.5 pc x 2 pc) at 0.02 pc resolution and spatially resolve the polarized emission from individual filamentary structures for the first time. The inferred magnetic field structure is complex as a whole, with each individual filament aligned at different position angles relative to the local field orientation. We combine the BISTRO data with low- and high- resolution data derived from Planck and interferometers to study the multiscale magnetic field structure in this region. The magnetic field morphology drastically changes below a scale of ~1 pc and remains continuous from the scales of filaments (~0.1 pc) to that of protostellar envelopes (~0.005 pc or ~1000 au). Finally, we construct simple models in which we assume that the magnetic field is always perpendicular to the long axis of the filaments. We demonstrate that the observed variation of the relative orientation between the filament axes and the magnetic field angles are well reproduced by this model, taking into account the projection effects of the magnetic field and filaments relative to the plane of the sky. These projection effects may explain the apparent complexity of the magnetic field structure observed at the resolution of BISTRO data toward the filament network.

astro-ph.GA↗

arXiv2019

JCMT BISTRO survey: Magnetic Fields within the Hub-Filament Structure in IC 5146

We present the 850 $μ$m polarization observations toward the IC5146 filamentary cloud taken using the Submillimetre Common-User Bolometer Array 2 (SCUBA-2) and its associated polarimeter (POL-2), mounted on the James Clerk Maxwell Telescope (JCMT), as part of the B-fields In STar forming Regions Observations (BISTRO). This work is aimed at revealing the magnetic field morphology within a core-scale ($\lesssim 1.0$ pc) hub-filament structure (HFS) located at the end of a parsec-scale filament. To investigate whether or not the observed polarization traces the magnetic field in the HFS, we analyze the dependence between the observed polarization fraction and total intensity using a Bayesian approach with the polarization fraction described by the Rice likelihood function, which can correctly describe the probability density function (PDF) of the observed polarization fraction for low signal-to-noise ratio (SNR) data. We find a power-law dependence between the polarization fraction and total intensity with an index of 0.56 in $A_V\sim$ 20--300 mag regions, suggesting that the dust grains in these dense regions can still be aligned with magnetic fields in the IC5146 regions. Our polarization maps reveal a curved magnetic field, possibly dragged by the contraction along the parsec-scale filament. We further obtain a magnetic field strength of 0.5$\pm$0.2 mG toward the central hub using the Davis-Chandrasekhar-Fermi method, corresponding to a mass-to-flux criticality of $\sim$ $1.3\pm0.4$ and an Alfvénic Mach number of $<$0.6. These results suggest that gravity and magnetic field is currently of comparable importance in the HFS, and turbulence is less important.

astro-ph.GA↗

arXiv2014

SPIRE Map-Making Test Report

The photometer section of SPIRE is one of the key instruments on board of Herschel. Its legacy depends very much on how well the scanmap observations that it carried out during the Herschel mission can be converted to high quality maps. In order to have a comprehensive assessment on the current status of SPIRE map-making, as well as to provide guidance for future development of the SPIRE scan-map data reduction pipeline, we carried out a test campaign on SPIRE map-making. In this report, we present results of the tests in this campaign.

astro-ph.IM↗

arXiv2013

Variation in dust properties in a dense filament of the Taurus molecular complex (L1506)

We observed the L1506 filament, which is located in the Taurus molecular complex, with the Herschel PACS and SPIRE instruments. Our aim is to prove the variation in grain properties along the entire length of the filament. In particular, we want to determine above which gas density this variation arises and what changes in the grain optical properties/size distribution are required. We use the 3D radiative transfer code CRT, coupled to the dust emission and extinction code DustEM, to model the emission and extinction of the dense filament. We test a range of optical properties and size distributions for the grains: dust of the diffuse interstellar medium (interstellar PAHs and amorphous carbons and silicates) and both compact and fluffy aggregates. We find that the grain opacity has to increase across the filament to fit simultaneously the near-IR extinction and Herschel emission profiles of L1506. We interpret this change to be a consequence of the coagulation of dust grains to form fluffy aggregates. Grains similar to those in the diffuse medium have to be present in the outer layers of the cloud, whereas aggregates must prevail above gas densities of a few 1000 H/cm3. This corresponds to line-of-sights with visual extinction in the V band of the order of 2 to 3. The dust opacity at 250 microns is raised by a factor of 1.8 to 2.2, while the grain average size is increased by a factor of 5. These exact numbers depend naturally on the dust model chosen to fit the data. Our findings agree with the constraints given by the study of the gas molecular lines. Using a simple approach, we show that the aggregates may have time to form inside the filament within the cloud lifetime. Our model also characterises the density structure of the filament, showing that the filament width is not constant along L1506 but instead varies by a factor of the order of 4.

astro-ph.GA↗

arXiv2013

Formation and evolution of interstellar filaments; Hints from velocity dispersion measurements

We investigate the gas velocity dispersions of a sample of filaments recently detected as part of the Herschel Gould Belt Survey in the IC5146, Aquila, and Polaris interstellar clouds. To measure these velocity dispersions, we use 13CO, C18O, and N2H+ line observations obtained with the IRAM 30m telescope. Correlating our velocity dispersion measurements with the filament column densities derived from Herschel data, we show that interstellar filaments can be divided into two regimes: thermally subcritical filaments, which have transonic velocity dispersions (c_s ~< σ_tot < 2 c_s) independent of column density, and are gravitationally unbound; and thermally supercritical filaments, which have higher velocity dispersions scaling roughly as the square root of column density (σ_tot ~ Σ^0.5), and are self-gravitating. The higher velocity dispersions of supercritical filaments may not directly arise from supersonic interstellar turbulence but may be driven by gravitational contraction/accretion. Based on our observational results, we propose an evolutionary scenario whereby supercritical filaments undergo gravitational contraction and increase in mass per unit length through accretion of background material while remaining in rough virial balance. We further suggest that this accretion process allows supercritical filaments to keep their approximately constant inner widths (~ 0.1 pc) while contracting.

astro-ph.SR↗

arXiv2012

A First Look at the Auriga-California Giant Molecular Cloud With Herschel and the CSO: Census of the Young Stellar Objects and the Dense Gas

We have mapped the Auriga/California molecular cloud with the Herschel PACS and SPIRE cameras and the Bolocam 1.1 mm camera on the Caltech Submillimeter Observatory (CSO) with the eventual goal of quantifying the star formation and cloud structure in this Giant Molecular Cloud (GMC) that is comparable in size and mass to the Orion GMC, but which appears to be forming far fewer stars. We have tabulated 60 compact 70/160um sources that are likely pre-main-sequence objects and correlated those with Spitzer and WISE mid-IR sources. At 1.1 mm we find 18 cold, compact sources and discuss their properties. The most important result from this part of our study is that we find a modest number of additional compact young objects beyond those identified at shorter wavelengths with Spitzer. We also describe the dust column density and temperature structure derived from our photometric maps. The column density peaks at a few x 10^22 cm^-2 (N_H2) and is distributed in a clear filamentary structure along which nearly all the pre-main-sequence objects are found. We compare the YSO surface density to the gas column density and find a strong non-linear correlation between them. The dust temperature in the densest parts of the filaments drops to ~10K from values ~ 14--15K in the low density parts of the cloud. We also derive the cumulative mass fraction and probability density function of material in the cloud which we compare with similar data on other star-forming clouds.

astro-ph.GA↗

arXiv2012

Changes Of Dust Opacity With Density in the Orion A Molecular Cloud

We have studied the opacity of dust grains at submillimeter wavelengths by estimating the optical depth from imaging at 160, 250, 350, and 500 um from the Herschel Gould Belt Survey and comparing this to a column density obtained from the 2MASS-derived color excess E(J-Ks). Our main goal was to investigate the spatial variations of the opacity due to "big" grains over a variety of environmental conditions and thereby quantify how emission properties of the dust change with column (and volume) density. The central and southern areas of the Orion A molecular cloud examined here, with NH ranging from 1.5X10^21 cm^-2 to 50X10^21 cm^-2, are well suited to this approach. We fit the multi-frequency Herschel spectral energy distributions (SEDs) of each pixel with a modified blackbody to obtain the temperature, T, and optical depth, τ(1200), at a fiducial frequency of 1200 GHz (250 um). Using a calibration of NH/E(J-Ks)for the interstellar medium (ISM) we obtained the opacity (dust emission cross-section per H nucleon), σ_e(1200), for every pixel. From a value of ~ 1X10^-25 cm^2 H^-1 at the lowest column densities that is typical of the high latitude diffuse ISM, σ_e(1200) increases as NH^0.28 over the range studied. This is suggestive of grain evolution. Integrating the SEDs over frequency, we also calculated the specific power P (emission power per H) for the big grains. In low column density regions where dust clouds are optically thin to the interstellar radiation field (ISRF), P is typically 3.7 X 10^-31 W H^-1, again close to that in the high latitude diffuse ISM. However, we find evidence for a decrease of P in high column density regions, which would be a natural outcome of attenuation of the ISRF that heats the grains, and for localized increases for dust illuminated by nearby stars or embedded protostars.

astro-ph.GA↗

arXiv2011

The formation of active protoclusters in the Aquila Rift: A millimeter continuum view

Abridged -- We present an analysis of the Aquila Rift complex which addresses the questions of the star formation rate (SFR), star formation efficiency (SFE) and typical lifetime of the Class 0 protostellar phase in two nearby cluster-forming clumps: the Serpens South and W40 protoclusters. We carried out a 1.2 mm dust continuum mapping of the Aquila Rift complex with the MAMBO bolometer array on the IRAM 30m telescope. We perform a systematic source extraction in our millimeter continuum map. Based on complementary data from the Herschel Gould Belt survey and Spitzer maps, we characterize the SEDs of the 77 mm continuum sources detected with MAMBO and estimate their evolutionary stages. Taking advantage of the comprehensive dataset available for the Serpens South region, spanning wavelengths from 2 microns to 1.2 mm, we estimate the numbers of young stellar objects (YSOs) at different evolutionary stages and find a ratio of Class 0 to Class I protostars N(0)/N(I)=0.19-0.27. This low ratio supports a scenario of relatively fast accretion at the beginning of the protostellar phase, and leads to a Class 0 lifetime of ~4-9x10^{4} yr. We also show that both the Serpens South and W40 protoclusters are characterized by large fractions of protostars and high SFRs ~20-50 Msun.Myr^{-1}pc^{-2}, in agreement with the idea that these two nearby clumps are active sites of clustered star formation currently undergoing bursts of star formation, and have the potential ability to form bound star clusters. While the formation of these two protoclusters is likely to have been initiated in a very different manner, the resulting protostellar populations are observed to be very similar. This suggests that after the onset of gravitational collapse, the detailed manner in which the collapse has been initiated does not affect much the ability of a clump to form stars.

astro-ph.GA↗

arXiv2011

Filaments and ridges in Vela C revealed by Herschel: from low-mass to high-mass star-forming sites

We present the first Herschel PACS and SPIRE results of the Vela C molecular complex in the far-infrared and submillimetre regimes at 70, 160, 250, 350, and 500 um, spanning the peak of emission of cold prestellar or protostellar cores. Column density and multi-resolution analysis (MRA) differentiates the Vela C complex into five distinct sub-regions. Each sub-region displays differences in their column density and temperature probability distribution functions (PDFs), in particular, the PDFs of the `Centre-Ridge' and `South-Nest' sub-regions appear in stark contrast to each other. The Centre-Ridge displays a bimodal temperature PDF representative of hot gas surrounding the HII region RCW 36 and the cold neighbouring filaments, whilst the South-Nest is dominated by cold filamentary structure. The column density PDF of the Centre-Ridge is flatter than the South-Nest, with a high column density tail, consistent with formation through large-scale flows, and regulation by self-gravity. At small to intermediate scales MRA indicates the Centre-Ridge to be twice as concentrated as the South-Nest, whilst on larger scales, a greater portion of the gas in the South-Nest is dominated by turbulence than in the Centre-Ridge. In Vela C, high-mass stars appear to be preferentially forming in ridges, i.e., dominant high column density filaments.

astro-ph.GA↗