Searcharxiv⌕ Search

arXiv subjects

Verena Maier-Kiener

Publications and source records attributed to Verena Maier-Kiener.

5 recordsLinked to original sources

Resolving the Metastable Si-XIII Structure through Convergent Theory and Experiment

Silicon is the undisputed cornerstone of modern technology, with applications ranging from micro- and opto-electronics to quantum technologies. Recently, the exploration of its allotropes has emerged as a pivotal frontier for engineering materials with tailored optical and electronic functionalities. High-pressure experiments have revealed several metastable silicon phases, among which is Si-XIII. First observed more than 20 years ago, this phase has remained structurally unidentified, representing a significant gap in our understanding of elemental silicon allotropy. In this work, a convergent methodology is employed combining advanced theoretical modeling with experimental characterization to finally resolve the long-standing structural assignment of Si-XIII. Guided by careful experimental observations, a structural model validated through first-principles optimization and systematically tested against multiple experimental signatures is constructed. All the fingerprints of this phase are rationalized by our proposed crystal structure: interplanar spacings, Raman frequencies, thermodynamic stability, and kinetic pathways. These findings provide a crucial missing piece in the high-pressure phase diagram of silicon and demonstrate the power of integrating computational predictions with experimental validation to resolve complex structural problems in materials science.

cond-mat.mtrl-sci↗

Formation of Micrometer-Sized Textured Hexagonal Silicon Crystals via Nanoindentation

We present a comprehensive study on the formation of micrometer-sized, textured hexagonal diamond silicon (hd-Si) crystals via nanoindentation followed by annealing. Utilizing advanced characterization techniques such as polarized Raman spectroscopy, high-resolution transmission electron microscopy, and electron energy-loss spectroscopy, we demonstrate the successful transformation of silicon into high-quality hd-Si. The experimental results are further supported by first-principles calculations and molecular dynamics simulations. Notably, the hd-Si phase consists of nanometer-sized grains with slight misorientations, organized into large micrometer-scale textured domains. These findings underscore the potential of nanoindentation as a precise and versatile tool for inducing pressure-driven phase transformations, particularly for the stabilization of hexagonal silicon. The textured nature of hd-Si also presents a unique opportunity to tailor its optical properties, opening new avenues for its application in semiconductor and optoelectronic devices.

cond-mat.mtrl-sci↗

Nanoindentation creep of supercrystalline nanocomposites

Supercrystalline nanocomposites (SCNCs) are inorganic-organic hybrid materials with a unique periodic nanostructure, and as such they have been gaining growing attention for their intriguing functional properties and parallelisms with hierarchical biomaterials. Their mechanical behavior remains, however, poorly understood, even though its understanding and control are of paramount importance to allow SCNCs implementation into devices. An important aspect that has not been tackled yet is their time-dependent deformation behavior, which is nevertheless expected to play an important role in materials containing such a distribution of organic phase. Hereby, we report on the creep of ceramic-organic SCNCs with varying degrees of organic crosslinking, as assessed via nanoindentation. Creep strains and their partial recoverability are observed, hinting at the co-presence of viscoelasticity and viscoplasticity, and a clear effect of crosslinking in decreasing the overall material deformability. We rationalize our experimental observations with the analysis of stress exponent and activation volume, resulting in a power-law breakdown behavior and governing deformation mechanisms occurring at the organic sub-nm interfaces scale, in terms of organic ligands rearrangement. The set of results is reinforced by the evaluation of the strain rate sensitivity via strain rate jump tests, and the assessment of the effect of oscillations during continuous stiffness measurement mode.

cond-mat.mtrl-sci↗

Low temperature deformation of MoSi$_2$ and the effect of Ta, Nb and Al as alloying elements

Molybdenum disilicide (MoSi$_2$) is a very promising material for high temperature structural applications due to its high melting point (2030 °C), low density, high thermal conductivity and good oxidation resistance. However, MoSi$_2$ has limited ductility below 900 °C due to its anisotropic plastic deformation behaviour and high critical resolved shear stresses on particular slip systems. Nanoindentation of MoSi$_2$ microalloyed with aluminium, niobium or tantalum showed that all alloying elements cause a decrease in hardness. Analysis of surface slip lines indicated the activation of the additional {1 1 0}<1 1 1> slip system in microalloyed MoSi$_2$, which is not active below 300 °C in pure MoSi$_2$. This was confirmed by TEM dislocation analysis of the indentation plastic zone. Further micropillar compression experiments comparing pure MoSi$_2$ and the Ta-alloyed sample enabled the determination of the critical resolved shear stresses of individual slip systems even in the most brittle [0 0 1] crystal direction.

cond-mat.mtrl-sci↗

Mechanical properties of the magnetocaloric intermetallic LaFe11.2Si1.8 alloy at different length scales

In this work the global and local mechanical properties of the magnetocaloric intermetallic LaFe11.2Si1.8 alloy are investigated by a combination of different testing and characterization techniques in order to shed light on the partly contradictory data in recent literature. Macroscale compression tests were performed to illuminate the global fracture behavior and evaluate it statistically. LaFe11.2Si1.8 demonstrates a brittle behavior with fracture strains below 0.6 % and widely distributed fracture stresses of 180-620 MPa leading to a Weibull modulus of m = 2 to 6. The local mechanical properties, such as hardness and Youngs modulus, of the main and secondary phases are examined by nanoindentation and Vickers microhardness tests. An intrinsic strength of the main magnetocaloric phase of at least 2 GPa is estimated. The significantly lower values obtained by compression tests are attributed to the detrimental effect of pores, microcracks, and secondary phases. Microscopic examination of indentation-induced cracks reveals that ductile alpha-Fe precipitates act as crack arrestors whereas pre-existing cracks at La-rich precipitates provide numerous "weak links" for the initiation of catastrophic fracture. The presented systematic study extends the understanding of the mechanical reliability of La(Fe, Si)13 alloys by revealing the correlations between the mechanical behavior of macroscopic multi-phase samples and the local mechanical properties of the single phases.

cond-mat.mtrl-sci↗