arXiv subjects

Veronika Witzke

Publications and source records attributed to Veronika Witzke.

17 recordsLinked to original sources

arXiv2026

Towards understanding stellar variability at the sub m/s level: granulation-induced variability across the optical spectrum

Detecting the radial velocity signal of Earth-mass exoplanets requires the characterisation and removal of granulation-induced radial velocity variability from spectroscopic observations. By coupling three-dimensional (3D) hydrodynamic (HD) simulations to a radiative transfer code, we can isolate and study the effect of granulation on stellar lines. In this study we isolated the impact of granulation on spectral line shapes and shifts for the largest and most diverse synthetic spectral line sample to date. Our aims were twofold. First, we quantified how granulation affects the temporal evolution of shapes and shifts of 72 unblended spectral lines in two wavelength regions: 5500-5600 Å and 6100-6200 Å, from disc centre to the stellar limb. Second, we investigated if spectral lines behave coherently in their line shape variability. We find that weak lines show the largest radial-velocity variability due to granulation, up to 40 m/s at disc centre and 50 m/s at the stellar limb. On the other hand, strong lines exhibit larger variability in equivalent width than weak lines across the stellar disc. In addition, the equivalent width and line depth of a spectral line are strongly linearly correlated with its radial velocity. While granulation affects all three of these quantities, planetary Doppler shifts only affect radial velocities, opening the door to new granulation-mitigation methods. Lastly, we find that the radial velocity and equivalent width of most spectral lines in our sample evolve coherently in time, with the Fe I and Ca I lines behaving the most similarly. Due to the coherency, line blends will not significantly affect the temporal behaviour of RV and line shape, as induced by granulation. Besides, the coherency between spectral lines offer the opportunity to create disc-integrated spectra of many lines simultaneously, which will be explored in future work.

astro-ph.SR↗

arXiv2026

The Fe I 4377 Å Line as a Solar Faculae Indicator: Insights from Spectral Ratio Analysis

Faculae are a dominant source of stellar activity noise in radial velocity measurements, yet their low contrast and broad surface distribution make them difficult to track in disc-integrated observations. We apply Spectral Ratio Analysis (SRA) to HARPS-N Sun-as-a-star observations to isolate and characterize the spectral imprint of facular regions over rotational timescales. The resulting SRA spectra show coherent, line-dependent variability sensitive to surface magnetic activity, with the Fe I 4377 Angstrom line exhibiting a particularly strong diagnostic response to facular coverage. We interpret the observed signatures using two complementary synthetic frameworks: composite PHOENIX spectra, from which we derive best-fit facular temperature contrasts in the range 200-400 K, and MPS-ATLAS spectra synthesized using MURaM simulations of the quiet Sun including a small-scale dynamo and magnetically-enhanced facular analogues with initial mean vertical magnetic fields of 100G, 200G, and 300G. Both approaches are benchmarked against facular filling factors measured from Solar Dynamics Observatory (SDO) disc-resolved images. We find good agreement between SDO-measured and SRA-inferred filling factors using the Fe I 4377 Angstrom line, with Pearson R coefficients of 0.587-0.927 across models and timescales. The estimated filling factors track the solar activity cycle, rising from ~1.5% at lower activity to ~5.5% at higher activity, consistent with SDO-measured filling factors. These results demonstrate that SRA offers a means to reliably track surface magnetic activity in disc-resolved spectra, which is necessary for mitigating the effects of activity on RV characterization of exoplanet masses and atmospheres at modern precision.

astro-ph.SR↗

arXiv2026

Decoding the Radial Velocity Signatures of Solar Faculae with 3D MHD Simulations

We model the solar radial velocity (RV) signal induced by faculae, the dominant contributor to RV variability in Sun-like stars. We use a representative case of a facular patch transiting the visible solar disk as the Sun rotates to disentangle various physical effects contributing to the RV signal. Our approach is based on 3D radiative magnetohydrodynamic (MHD) simulations of the solar photosphere and upper convection zone with the MURaM code and spectral synthesis with the MPS-ATLAS code. We show that the faculae-induced RV strongly depends on the facular position on the solar disk. Near disk centre, facular magnetic fields inhibit the convective blueshift and thus produce a relative redshift of the solar spectrum. Surprisingly, when located closer to the limb, namely at heliocentric angles greater than about $60^\circ$, faculae produce a relative blueshift. This transition from redshift to blueshift is caused by the effect of magnetic fields on horizontal flows, which dominate the signal near the limb, and on the visibility of these flows. In combination with solar rotation, this centre-to-limb dependence of the facular effect leads to a complex RV profile during the facular transit and, in particular, to a phase lag between the maximum of the RV signal and the facular crossing of the central meridian. We further show that, in contrast to stellar reflex motion, the facular signal strongly depends on the spectral line in which it is measured.

astro-ph.SR↗

arXiv2026

Synthetic disk-integrated absorption lines isolating stellar granulation for high-precision RV studies

We present a novel method for constructing high-accuracy, time-varying disk-integrated stellar absorption line profiles that isolate the effects of granulation alone. This framework provides an effectively unlimited supply of physically consistent training data, offering a unique opportunity to study granulation-driven velocity variability with no contamination from other stellar processes or instrumental systematics. Our interpolation scheme enables accurate profile generation at arbitrary limb angles and successfully reproduces observed disk integrated solar bisector shapes from IAG spectra. Using four Fe I lines (525.0, 615.2, 617.3, and 627.1 nm), we produce 1000 model star disk-integrated realisations per line and find an isolated granulation-induced RV scatter of 0.16-0.21 m s^-1. Using our synthetic profiles and assuming infinite signal-to-noise, we find strong correlations between various line-shape metrics and convective blueshift, demonstrating that line-shape diagnostics can, in principle, trace granulation effects. Equivalent width proves the strongest diagnostic, achieving up to 60% scatter reduction. However, the strength of all simple line shape diagnostics rapidly diminishes once photon noise is injected. Even when artificially boosting the signal to represent a spectrum containing ~1000 spectral lines, the achievable improvement with these metrics remains below 10% at typical signal-to-noise ratios. Our results highlight the need for more robust, noise-resilient diagnostics and position our synthetic dataset as a valuable testbed for developing and benchmarking such methods.

astro-ph.SR↗

arXiv2026

Simulations of facular magnetic fields on cool stars I: Main sequence stars with solar metallicity

Stellar convection in the presence of magnetic field affects the emergent intensity, as well as the structure and evolution of cool main-sequence dwarfs. We aim to understand the effect of faculae-like field strengths on near-surface stellar convection using 3D radiative MHD simulations of near-surface magneto-convection. We compare simulations of F, G, K and M main-sequence stars with a small-scale dynamo (SSD) to faculae-like spatially averaged field strengths (from 100 to 500 G). We focus on the effect of imposed magnetic field on the thermodynamic stratification and velocities, along with the bolometric intensity and surface field strength. Imposed magnetic fields result in reduced average density and gas pressure near the surface compared to the SSD simulations. The temperature stratification also shows a dip at and just below the stellar surface. The changes in average bolometric intensity are within a percent, with different trends with field strength for different stellar types. In addition, the convective velocities are reduced. The magnitude of changes in thermodynamic quantities are related to field strength as well as the stellar $T_{\rm eff}$. Faculae-strength magnetic fields modify the near surface convection by reducing gas pressure and density as well as suppressing convection in regions with strong field concentrations. The strength of these effects depends on the stellar type.

astro-ph.SR↗

arXiv2026

Overestimated Pressure Broadening Misleads Model Spectra in Cool M Dwarf Stars

Available one-dimensional stellar models fail to reproduce the observed spectrum of the ultracool M dwarf TRAPPIST-1. In particular, current models predict strong iron hydride (FeH) absorption due to the Wing-Ford bands at 0.99$μ$m, yet this spectral feature is only weakly present in TRAPPIST-1 and other mid-to-late M dwarf stars. Additionally, the shape of the continuum between the water bands in the near-infrared does not match between models and observations. Here, we show that assumptions about pressure broadening, specifically van der Waals broadening, have a dramatic effect on modeled broadband spectral features. We use Merged Parallelized Simplified-ATLAS to generate synthetic spectra over a range of van der Waals broadening strengths, adopting 1D PHOENIX temperature-pressure structures. We find that minimal broadening best matches the observed FeH profile at 0.99$μ$m and in the pseudocontinuum between the large water bands. These results suggest that broadening prescriptions derived for Sun-like stars are not valid for lower-mass stars and that pressure broadening for molecular lines in cool stellar atmospheres must be reevaluated. Refining pressure broadening treatments will improve the accuracy of M dwarf spectral models, enabling more reliable determinations of stellar properties and atmospheric compositions of planets orbiting M dwarfs.

astro-ph.SR↗

arXiv2025

Towards understanding stellar variability at the sub m/s level: Isolating granulation signals in synthetic spectral lines

Granulation in the photospheres of FGK-type stars induces variability in absorption lines, complicating exoplanet detection via radial velocities and characterisation via transmission spectroscopy. We aim to quantify the impact of granulation on the radial velocity and bisector asymmetry of stellar absorption lines of varying strengths and at different limb angles. We use 3D radiation-hydrodynamic simulations from MURaM paired with MPS-ATLAS radiative transfer calculations to synthesise time series' for four Fe I lines at different limb angles for a solar-type star. Our line profiles are synthesised at an extremely high resolution (R = 2,000,000), exceeding what is possible observationally and allowing us to capture intricate line shape variations. We introduce a new method of classifying the stellar surface into three components and use this to parameterise the line profiles. Our parameterisation method allows us to disentangle the contributions from p-modes and granulation, providing the unique opportunity to study the effects of granulation without contamination from p-mode effects. We validate our method by comparing radial velocity power spectra of our granulation time series to observations from the LARS spectrograph. We find that we are able to replicate the granulation component extracted from observations of the Fe I 617 nm line at the solar disk centre. We use our granulation-isolated results to show variations in convective blueshift and bisector asymmetry at different limb angles, finding good agreement with empirical results. We show that weaker lines have higher velocity contrast between granules and lanes, resulting in higher granulation-induced velocity fluctuations. Our parameterisation provides a computationally efficient strategy to construct new line profiles, laying the groundwork for future improvements in mitigating stellar noise in exoplanet studies.

astro-ph.SR↗

arXiv2024

First Calculations of Starspot Spectra based on 3D Radiative Magnetohydrodynamics Simulations

Accurate calculations of starspot spectra are essential for multiple applications in astronomy. The current standard is to represent starspot spectra by spectra of stars that are cooler than the quiet star regions. This implies approximating a starspot as a non-magnetic 1D structure in radiative-convective equilibrium, parametrizing convective energy transport by mixing length theory. It is the inhibition of convection by the starspot magnetic field that is emulated by using a lower spot temperature relative to the quiet stellar regions. Here, we take a different approach avoiding the approximate treatment of convection and instead self-consistently accounting for the interaction between matter, radiation, and the magnetic field. We simulate spots on G2V, K0V, M0V stars with the 3D radiative magnetohydrodynamics code MURaM and calculate spectra ($R \approx 500$ from 250~nm to 6000~nm) using ray-by-ray radiative transfer with the MPS-ATLAS code. We find that the 1D models fail to return accurate umbral and penumbral spectra on K0V and M0V stars where convective and radiative transfer of energy is simultaneously important over a broad range of atmospheric heights rendering mixing length theory inaccurate. However, 1D models work well for G2V stars, where both radiation and convection significantly contribute to energy transfer only in a narrow region near the stellar surface. Quantitatively, the 1D approximation leads to errors longward of 500 nm of about 50\% for both umbral and penumbral flux contrast relative to quiet star regions on M0V stars, and less than 2\% (for umbrae) and 10\% (for penumbrae) for G2V stars.

astro-ph.SR↗

arXiv2024

A roadmap for the atmospheric characterization of terrestrial exoplanets with JWST

Ultra-cool dwarf stars are abundant, long-lived, and uniquely suited to enable the atmospheric study of transiting terrestrial companions with JWST. Amongst them, the most prominent is the M8.5V star TRAPPIST-1 and its seven planets. While JWST Cycle 1 observations have started to yield preliminary insights into the planets, they have also revealed that their atmospheric exploration requires a better understanding of their host star. Here, we propose a roadmap to characterize the TRAPPIST-1 system -- and others like it -- in an efficient and robust manner. We notably recommend that -- although more challenging to schedule -- multi-transit windows be prioritized to mitigate the effects of stellar activity and gather up to twice more transits per JWST hour spent. We conclude that, for such systems, planets cannot be studied in isolation by small programs, but rather need large-scale, jointly space- and ground-based initiatives to fully exploit the capabilities of JWST for the exploration of terrestrial planets.

astro-ph.EP↗

arXiv2024

Stellar Surface Magnetic Fields Impact Limb Darkening

Stars appear darker at their limbs than at their disk centers because at the limb we are viewing the higher and cooler layers of stellar photospheres. Limb darkening derived from state-of-the-art stellar atmosphere models systematically fails to reproduce recent transiting exoplanet light curves from the Kepler, TESS, and JWST telescopes -- stellar brightness obtained from measurements drops less steeply towards the limb than predicted by models. All previous models assumed atmosphere devoid of magnetic fields. Here we use our new stellar atmosphere models computed with the 3D radiative magneto-hydrodynamic code MURaM to show that small-scale concentration of magnetic fields on the stellar surface affect limb darkening at a level that allows us to explain the observations. Our findings provide a way forward to improve the determination of exoplanet radii and especially the transmission spectroscopy analysis for transiting planets, which relies on a very accurate description of stellar limb darkening from the visible through the infrared. Furthermore, our findings imply that limb darkening allows measuring the small-scale magnetic field on stars with transiting planets.

astro-ph.SR↗

arXiv2023

Testing MURaM and MPS-ATLAS against the quiet solar spectrum

Three-dimensional (3D) radiative magnetohydrodynamics (MHD) simulations are the only way to model stellar atmospheres without any ad hoc parameterisations. Several 3D radiative MHD codes have achieved good quantitative agreement with observables for our Sun. We aim to validate the most up-to-date version of the MURaM code against well established quiet Sun measurements, in particular spatially averaged measurements that are relevant for stellar studies. This validation extends the number of solar observables that MURaM can reproduce with high precision. It is also an essential condition for using MURaM to accurately calculate spectra of other cool stars. We simulate the solar upper convection zone and photosphere harbouring a small-scale-dynamo. Using time series of 3D snapshots we calculate the spectral irradiance, limb darkening and selected spectral lines, which we compare to observations. The computed observables agree well with the observations, in particular the limb darkening of the quiet Sun is reproduced remarkably well.

astro-ph.SR↗

arXiv2023

Small-scale Dynamo in Cool Stars: I. Changes in stratification and near-surface convection for main-sequence spectral types

Some of the small-scale solar magnetic flux can be attributed to a small-scale dynamo (SSD) operating in the near-surface convection. The SSD fields have consequences for solar granular convection, basal flux, as well as chromospheric heating. A similar SSD mechanism is expected to be active in the near-surface convection of other cool main-sequence stars, but this has never been investigated. We aim to investigate changes in stratification and convection due to inclusion of SSD fields for F3V, G2V, K0V and M0V spectral types in the near-surface convection. 3D magnetohydrodynamic (MHD) models of the four stellar boxes, covering the subsurface convection zone up to the lower photosphere in a small cartesian box, are studied using the \textit{MURaM} radiative-MHD simulation code. The SSD runs are compared against reference hydrodynamic runs. An SSD is found to efficiently produce magnetic field with energies ranging between 5\% to 80\% of the plasma kinetic energy at different depths. This ratio tends to be larger for larger $T_{\mathrm{eff}}$. The relative change in density and gas pressure stratification for the deeper convective layers due to SSD magnetic fields is negligible, except for the F-star. For the F-star, there is a substantial reduction in convective velocities due to Lorentz force feedback from magnetic fields, which, in turn, reduces the turbulent pressure. SSD in near-surface convection for cool main-sequence stars introduces small but significant changes in thermodynamic stratification (especially for the F-star) due to reduction in convective velocities.

astro-ph.SR↗

arXiv2023

Spectral variability of photospheric radiation due to faculae II: Facular contrasts for cool main-sequence stars

Magnetic features on the surface of stars, such as spots and faculae, cause stellar spectral variability on time-scales of days and longer. For stars other than the Sun, the spectral signatures of faculae are poorly understood, limiting our ability to account for stellar pollution in exoplanet transit observations. Here we present the first facular contrasts derived from magnetoconvection simulations for K0, M0 and M2 main-sequence stars and compare them to previous calculations for G2 main-sequence stars. We simulate photospheres and immediate subsurface layers of main-sequence spectral types between K0 and M2, with different injected vertical magnetic fields (0 G, 100 G, 300 G and 500 G) using MURaM, a 3D radiation-magnetohydrodynamics code. We show synthetic spectra and contrasts from the UV (300 nm) to the IR (10000 nm) calculated using the ATLAS9 radiative transfer code. The calculations are performed for nine viewing angles to characterise the facular radiation across the disc. The brightness contrasts of magnetic regions are found to change significantly across spectral type, wavelength and magnetic field strength, leading to the conclusion that accurate contrasts cannot be found by scaling solar values. This is due to features of different size, apparent structure and spectral brightness emerging in the presence of a given magnetic field for different spectral types.

astro-ph.SR↗

arXiv2022

Can 1D radiative equilibrium models of faculae be used for calculating contamination of transmission spectra?

The reliable characterization of planetary atmospheres with transmission spectroscopy requires realistic modeling of stellar magnetic features, since features that are attributable to an exoplanet atmosphere could instead stem from the host star's magnetic activity. Current retrieval algorithms for analysing transmission spectra rely on intensity contrasts of magnetic features from 1D radiative-convective models. However, magnetic features, especially faculae, are not fully captured by such simplified models. Here we investigate how well such 1D models can reproduce 3D facular contrasts, taking a G2V star as an example. We employ the well established radiative magnetohydrodynamic code MURaM to obtain three-dimensional simulations of the magneto-convection and photosphere harboring a local small-scale-dynamo. Simulations without additional vertical magnetic fields are taken to describe the quiet solar regions, while simulations with initially 100 G, 200 G and 300 G vertical magnetic fields are used to represent different magnetic activity levels. Subsequently, the spectra emergent from the MURaM cubes are calculated with the MPS-ATLAS radiative transfer code. We find that the wavelength dependence of facular contrast from 1D radiative-convective models cannot reproduce facular contrasts obtained from 3D modeling. This has far reaching consequences for exoplanet characterization using transmission spectroscopy, where accurate knowledge of the host star is essential for unbiased inferences of the planetary atmospheric properties.

astro-ph.SR↗

arXiv2021

Forward modelling of Kepler-band variability due to faculae and spots

Variability observed in photometric lightcurves of late-type stars (on timescales longer than a day) is a dominant noise source in exoplanet surveys and results predominantly from surface manifestations of stellar magnetic activity, namely faculae and spots. The implementation of faculae in lightcurve models is an open problem, with scaling typically based on spectra equivalent to hot stellar atmospheres or assuming a solar-derived facular contrast. We modelled rotational (single period) lightcurves of active G2, K0, M0 and M2 stars, with Sun-like surface distributions and realistic limb-dependent contrasts for faculae and spots. The sensitivity of lightcurve variability to changes in model parameters such as stellar inclination, feature area coverage, spot temperature, facular region magnetic flux density and active band latitudes is explored. For our lightcurve modelling approach we used actress, a geometrically accurate model for stellar variability. actress generates 2-sphere maps representing stellar surfaces and populates them with user-prescribed spot and facular region distributions. From this, lightcurves can be calculated at any inclination. Quiet star limb darkening and limb-dependent facular contrasts were derived from MURaM 3D magnetoconvection simulations using ATLAS9. 1D stellar atmosphere models were used for the spot contrasts. We applied actress in Monte-Carlo simulations, calculating lightcurve variability amplitudes in the Kepler band. We found that, for a given spectral type and stellar inclination, spot temperature and spot area coverage have the largest effect on variability of all simulation parameters. For a spot coverage of 1%, the typical variability of a solar-type star is around 2 parts-per-thousand. The presence of faculae clearly affects the mean brightness and lightcurve shape, but has relatively little influence on the variability.

astro-ph.SR↗

arXiv2021

Where have all the solar-like stars gone? Rotation period detectability at various inclinations and metallicities

The plethora of photometric data collected by the Kepler space telescope has promoted the detection of tens of thousands of stellar rotation periods. However, these periods are not found to an equal extent among different spectral types. Interestingly, early G-type stars with near-solar rotation periods are strongly underrepresented among those stars with known rotation periods. In this study we investigate whether the small number of such stars can be explained by difficulties in the period determination from photometric time series. For that purpose, we generate model light curves of early G-type stars with solar rotation periods for different inclination angles, metallicities and (magnitude-dependent) noise levels. We find that the detectability is determined by the predominant type of activity (i.e. spot or faculae domination) on the surface, which defines the degree of irregularity of the light curve, and further depends on the level of photometric noise. These two effects significantly complicate the period detection and explain the lack of solar-like stars with known near-solar rotation periods. We conclude that the rotation periods of the majority of solar-like stars with near-solar rotation periods remain undetected to date. Finally, we promote the use of new techniques to recover more periods of near-solar rotators.

astro-ph.SR↗

arXiv2017

The influence of metallicity on stellar differential rotation and magnetic activity

Observations of Sun-like stars over the last half-century have improved our understanding of how magnetic dynamos, like that responsible for the 11-year solar cycle, change with rotation, mass and age. Here we show for the first time how metallicity can affect a stellar dynamo. Using the most complete set of observations of a stellar cycle ever obtained for a Sun-like star, we show how the solar analog HD 173701 exhibits solar-like differential rotation and a 7.4-year activity cycle. While the duration of the cycle is comparable to that generated by the solar dynamo, the amplitude of the brightness variability is substantially stronger. The only significant difference between HD 173701 and the Sun is its metallicity, which is twice the solar value. Therefore, this provides a unique opportunity to study the effect of the higher metallicity on the dynamo acting in this star and to obtain a comprehensive understanding of the physical mechanisms responsible for the observed photometric variability. The observations can be explained by the higher metallicity of the star, which is predicted to foster a deeper outer convection zone and a higher facular contrast, resulting in stronger variability.

astro-ph.SR↗