arXiv subjects

Viacheslav Snigirev

Publications and source records attributed to Viacheslav Snigirev.

6 recordsLinked to original sources

arXiv2024

Piezoelectric actuation for integrated photonics

Recent decades have seen significant advancements in integrated photonics, driven by improvements in nanofabrication technology. This field has developed from integrated semiconductor lasers and low-loss waveguides to optical modulators, enabling the creation of sophisticated optical systems on a chip scale capable of performing complex functions like optical sensing, signal processing, and metrology. The tight confinement of optical modes in photonic waveguides further enhances the optical nonlinearity, leading to a variety of nonlinear optical phenomena such as optical frequency combs, second-harmonic generation, and supercontinuum generation. Active tuning of photonic circuits is crucial not only for offsetting variations caused by fabrication in large-scale integration, but also serves as a fundamental component in programmable photonic circuits. Piezoelectric actuation in photonic devices offers a low-power, high-speed solution and is essential in the design of future photonic circuits due to its compatibility with materials like Si and Si3N4, which do not exhibit electro-optic effects. Here, we provide a detailed review of the latest developments in piezoelectric tuning and modulation, by examining various piezoelectric materials, actuator designs tailored to specific applications, and the capabilities and limitations of current technologies. Additionally, we explore the extensive applications enabled by piezoelectric actuators, including tunable lasers, frequency combs, quantum transducers, and optical isolators. These innovative ways of managing photon propagation and frequency on-chip are expected to be highly sought after in the future advancements of advanced photonic chips for both classical and quantum optical information processing and computing.

physics.optics↗

arXiv2023

Frequency agile photonic integrated external cavity laser

Recent advances in the development of ultra-low loss silicon nitride integrated photonic circuits have heralded a new generation of integrated lasers capable of reaching fiber laser coherence. However, these devices presently are based on self-injection locking of distributed feedback (DFB) laser diodes, increasing both the cost and requiring tuning of laser setpoints for their operation. In contrast, turn-key legacy laser systems use reflective semiconductor optical amplifiers (RSOA). While this scheme has been utilized for integrated photonics-based lasers, so far, no cost-effective RSOA-based integrated lasers exist that are low noise and simultaneously feature fast, mode-hop-free and linear frequency tuning as required for frequency modulated continuous wave (FMCW) LiDAR or for laser locking in frequency metrology. Here we overcome this challenge and demonstrate a RSOA-based, frequency agile integrated laser, that can be tuned with high speed, with high linearity at low power. This is achieved using monolithic integration of piezoelectrical actuators on ultra-low loss silicon nitride photonic integrated circuits in a Vernier filter-based laser scheme. The laser operates at 1550 nm, features 6 mW output power, 400 Hz intrinsic laser linewidth, and allows ultrafast wavelength switching within 7 ns rise time and 75 nW power consumption. In addition, we demonstrate the suitability for FMCW LiDAR by showing laser frequency tuning over 1.5 GHz at 100 kHz triangular chirp rate with nonlinearity of 0.25% after linearization, and use the source for measuring a target scene 10 m away with a 8.5 cm distance resolution.

physics.optics↗

arXiv2022

A heterogeneously integrated lithium niobate-on-silicon nitride photonic platform

The availability of thin-film lithium niobate on insulator (LNOI) and advances in processing have led to the emergence of fully integrated LiNbO3 electro-optic devices, including low-voltage, high-speed modulators, electro-optic frequency combs, and microwave-optical transducers. Yet to date, LiNbO3 photonic integrated circuits (PICs) have mostly been fabricated using non-standard etching techniques that lack the reproducibility routinely achieved in silicon photonics. Widespread future application of thin-film LiNbO3 requires a reliable and scalable solution using standard processing and precise lithographic control. Here we demonstrate a heterogeneously integrated LiNbO3 photonic platform that overcomes the abovementioned challenges by employing wafer-scale bonding of thin-film LiNbO3 to planarized low-loss silicon nitride (Si3N4) photonic integrated circuits, a mature foundry-grade integrated photonic platform. The resulting devices combine the substantial Pockels effect of LiNbO3 with the scalability, high-yield, and complexity of the underlying Si3N4 PICs. Importantly, the platform maintains the low propagation loss (<0.1 dB/cm) and efficient fiber-to-chip coupling (<2.5 dB per facet) of the Si3N4 waveguides. We find that ten transitions between a mode confined in the Si3N4 PIC and the hybrid LiNbO$_3$ mode produce less than 0.8 dB additional loss, corresponding to a loss per transition not exceeding 0.1 dB. These nearly lossless adiabatic transitions thus link the low-loss passive Si3N4 photonic structures with electro-optic components. We demonstrate high-Q microresonators, optical splitters, electrically tunable photonic dimers, electro-optic frequency combs, and carrier-envelope phase detection of a femtosecond laser on the same platform, thus providing a reliable and foundry-ready solution to low-loss and complex LiNbO3 integrated photonic circuits.

physics.optics↗

arXiv2022

Ultrafast tunable lasers using lithium niobate integrated photonics

Recent advances in the processing of thin-film LNOI have enabled low-loss photonic integrated circuits, modulators with improved half-wave voltage, electro-optic frequency combs and novel on-chip electro-optic devices, with applications ranging from 5G telecommunication and microwave photonics to microwave-to-optical quantum interfaces. Lithium niobate integrated photonic circuits could equally be the basis of integrated narrow-linewidth frequency-agile lasers. Pioneering work on polished lithium niobate crystal resonators has led to the development of electrically tunable narrow-linewidth lasers. Here we report low-noise frequency-agile lasers based on lithium niobate integrated photonics and demonstrate their use for coherent laser ranging. This is achieved through heterogeneous integration of ultra-low-loss silicon nitride photonic circuits with thin-film lithium niobate via direct wafer bonding. This platform features low propagation loss of 8.5 dB/m enabling narrow-linewidth lasing (intrinsic linewidth of 3 kHz) by self-injection locking to a III-V semiconductor laser diode. The hybrid mode of the resonator allows electro-optical laser frequency tuning at a speed of 12 PHz/s with high linearity, low hysteresis and while retaining narrow linewidth. Using this hybrid integrated laser, we perform a proof-of-concept FMCW LiDAR ranging experiment, with a resolution of 15 cm. By fully leveraging the high electro-optic coefficient of lithium niobate, with further improvements in photonic integrated circuits design, these devices can operate with CMOS-compatible voltages, or achieve mm-scale distance resolution. Endowing low loss silicon nitride integrated photonics with lithium niobate, gives a platform with wide transparency window, that can be used to realize ultrafast tunable lasers from the visible to the mid-infrared, with applications from OCT and LiDAR to environmental sensing.

physics.optics↗

arXiv2022

Tightly confining lithium niobate photonic integrated circuits and lasers

Photonic integrated circuits are indispensible for data transmission within modern datacenters and pervade into multiple application spheres traditionally limited for bulk optics, such as LiDAR and biosensing. Of particular interest are ferroelectrics such as Lithium Niobate, which exhibit a large electro-optical Pockels effect enabling ultrafast and efficient modulation, but are difficult to process via dry etching . For this reason, etching tightly confining waveguides - routinely achieved in silicon or silicon nitride - has not been possible. Diamond-like carbon (DLC) was discovered in the 1950s and is a material that exhibits an amorphous phase, excellent hardness, and the ability to be deposited in nano-metric thin films. It has excellent thermal, mechanical, and electrical properties, making it an ideal protective coating. Here we demonstrate that DLC is also a superior material for the manufacturing of next-generation photonic integrated circuits based on ferroelectrics, specifically Lithium Niobate on insulator (LNOI). Using DLC as a hard mask, we demonstrate the fabrication of deeply etched, tightly confining, low loss photonic integrated circuits with losses as low as 5.6 dB/m. In contrast to widely employed ridge waveguides, this approach benefits from a more than 1 order of magnitude higher area integration density while maintaining efficient electro-optical modulation, low loss, and offering a route for efficient optical fiber interfaces. As a proof of concept, we demonstrate a frequency agile hybrid integrated III-V Lithium Niobate based laser with kHz linewidth and tuning rate of 0.7 Peta-Hertz per second with excellent linearity and CMOS-compatible driving voltage. Our approach can herald a new generation of tightly confining ferroelectric photonic integrated circuits.

physics.optics↗

arXiv2021

Ultralow-noise frequency-agile photonic integrated lasers

Low-noise lasers are of central importance in a wide variety of applications, including high spectral-efficiency coherent communication protocols, distributed fibre sensing, and long distance coherent LiDAR. In addition to low phase noise, frequency agility, that is, the ability to achieve high-bandwidth actuation of the laser frequency, is imperative for triangular chirping in frequency-modulated continuous-wave (FMCW) based ranging or any optical phase locking as routinely used in metrology. While integrated silicon-based lasers have experienced major advances and are now employed on a commercial scale in data centers, integrated lasers with sub-100 Hz-level intrinsic linewidth are based on optical feedback from photonic circuits that lack frequency agility. Here, we demonstrate a wafer-scale-manufacturing-compatible hybrid photonic integrated laser that exhibits ultralow intrinsic linewidth of 25 Hz while offering unsurpassed megahertz actuation bandwidth, with a tuning range larger than 1 GHz. Our approach uses ultralow-loss (1 dB/m) Si$_3$N$_4$ photonic microresonators, combined with aluminium nitride (AlN) or lead zirconium titanate (PZT) microelectromechanical systems (MEMS) based stress-optic actuation. Electrically driven low-phase noise lasing is attained by self-injection locking of an Indium Phosphide (InP) laser chip and only limited by fundamental thermo-refractive noise. By utilizing difference drive and apodization of the photonic chip, a flat actuation response up to 10 MHz is achieved. We leverage this capability to demonstrate a compact coherent LiDAR engine that can generate up to 800 kHz FMCW triangular optical chirp signals, requiring neither any active linearization nor predistortion compensation, and perform a 10 m optical ranging experiment, with a resolution of 12.5 cm.

physics.optics↗