SearcharxivSearch

arXiv subjects

Vibhor Singh

Publications and source records attributed to Vibhor Singh.

At least 19 recordsLinked to original sources

A Cosmological BCFW Bridge and Its Canonical Geometry

We build a BCFW-like recursion for cosmological correlators using the orthogonal Grassmannian. The key step is a bridge deformation that leaves all the Grassmannian constraints intact. The recursion relations are purely algebraic and avoid any spectral or radial integrals that usually appear in curved space. We obtain the gluon 4-point correlator using this bridge, producing two factorization poles, a total energy singularity coming from the three point building block, and a shifted energy singularity that emerges only after adding the two channels using recursion. We then show that the helicity stripped four-gluon correlator has the canonical form of a rectangle, where its boundaries represent various poles. We also describe the geometry of the gluon correlator in the Pfaffians as the natural coordinates in the Grassmannian. Using multiple deformation bridges, we also obtain the graviton four point correlator and observe a double-copy like relation at the level of the four point function, away from the physical cuts for each channel. We also extended the BCFW bridge formalism to the supersymmetric Grassmannian.

hep-th

Superconducting cavity probes sliding ferroelectricity in small-angle twisted WSe$_2$

Ferroelectricity is a property of materials that exhibit spontaneous charge polarization. Ferroelectricity in 2D materials is interesting because of their applications in memory devices and field-effect transistors. Recently, a new type of ferroelectricity, known as sliding ferroelectricity, has been discovered, in which parallel-stacked bilayers of hexagonal boron nitride (hBN) or transition metal dichalcogenides (TMDCs) develop an out-of-plane electric polarization. In this work, we probe the polarization of small-angle parallel stacked WSe$_2$ by measuring its high-frequency AC response, achieved by embedding it into a half-wave superconducting coplanar waveguide cavity. We observe a hysteretic response in the capacitance of the stack and quality factor of the cavity, confirming ferroelectric switching in the system. Our results further reveal relaxation effects associated with ferroelectric domain-wall motion. This cavity-based technique has potential applications in probing domain-wall dynamics in a ferroelectric system at high frequencies.

cond-mat.mes-hall

A fluxonium qubit-based hybrid electromechanical system

Superconducting fluxonium qubits show a highly tunable energy-level structure, with transition frequencies spanning from a few MHz to few GHz. This range is well-aligned to the operational frequencies of highly coherent micro- and nano-mechanical resonators, making fluxonium an attractive candidate for hybrid electromechanical systems. In this work, we theoretically investigate a flux-tunable electromechanical system consisting of a fluxonium qubit coupled to a suspended mechanical resonator. The coupling arises from the motion-induced modulation of magnetic flux through the fluxonium loop, enabling both transverse and longitudinal electromechanical interactions that are tunable via external magnetic fields. By optimizing the design parameters of the fluxonium qubit, we demonstrate the feasibility of achieving strong resonant single-photon coupling near the flux-frustration point. We analyze the system dynamics across different coupling regimes, identifying signatures of electromagnetically induced transparency (EIT) in the longitudinal regime and mode splitting in the transverse regime. Additionally, we show that ground-state preparation of both subsystems is possible through sideband cooling of the mechanical resonator. These results suggest that a fluxonium-based hybrid electromechanical device could be a promising platform for studying macroscopic quantum phenomena and for applications in quantum technology.

quant-ph

A Supertwistor Formalism for $\mathcal{N}=1,2,3,4\;\text{SCFT}_3$

We develop a manifest supertwistor space formalism for three dimensional $\mathcal{N}=1, 2,3,4$ superconformal field theories. This formalism simultaneously makes manifest the supersymmetry, conformal invariance and conservation. We solve two and three point correlators of (half) integer spin conserved supercurrents using the graded supergroup generators. Apart from the superconformal generators, we find that the superhelicity operators are necessary to fix their functional form in this setup. The superhelicity operators can be recast into first order Euler equations which besides the standard polynomial solutions, also admit weak solutions that are distributional in nature. They play an important role in the case of three point functions, where the super-correlator takes the form of a product of delta functions. Interestingly, we find that these super-correlators are extremely simple, elegant and uniform for all spins and for all $\mathcal{N}\leq4$, which resemble the non supersymmetric correlators where the twistors are replaced with appropriately defined supertwistors.

hep-th

3D Conformal Field Theory in Twistor Space

The aim of this paper is to study three dimensional Lorentzian conformal field theories in twistor space. We formulate the conformal Ward identities and solve for two and three point Lorentzian Wightman functions. We found that the Helicity operators apart from the conformal generators play an important role in fixing their functional form. The equations take the form of first order Euler equations which in addition to the usual solutions that are polynomials, also possess weak solutions which are distributional in nature. All of these play an important role in our analysis. For instance, in the case of three point functions, the distributional solutions are indeed the ones realized by the CFT correlators. We also extend our analysis to parity odd Wightman functions which take an interesting form in twistor space. We verify our results by systematically analyzing the corresponding Wightman functions in momentum space and spinor helicity variables and matching with the twistor results via a half-Fourier transform.

hep-th

STIRAP-Inspired Robust Gates for a Superconducting Dual-Rail Qubit

STImulated Raman Adiabatic Passage (STIRAP) is a powerful technique for robust state transfer capabilities in quantum systems. This method, however encounters challenges for its implementation as a gate in qubit-subspace due to its sensitivity to initial states. By incorporating single-photon detuning into the protocol, the sensitivity to the initial state can effectively be mitigated, enabling STIRAP to operate as a gate. In this study, we experimentally demonstrate the implementation of robust $π$ and $π$/2 rotations in a dual-rail qubit formed by two strongly coupled fixed-frequency transmon qubits. We achieve state preparation fidelity in excess of 0.98 using such rotations. Our analysis reveals these gates exhibit significant resilience to errors. Furthermore, our numerical calculations confirm that these gates can achieve fidelity levels in excess of 0.999. This work suggest a way for realizing quantum gates which are robust against minor drifts in pulse or system parameters.

quant-ph

Absence of heat flow in ν = 0 quantum Hall ferromagnet in bilayer graphene

The charge neutrality point of bilayer graphene, denoted as ν = 0 state, manifests competing phases marked by spontaneously broken isospin (spin/valley/layer) symmetries under external magnetic and electric fields. However, due to their electrically insulating nature, identifying these phases through electrical conductance measurements remains challenging. A recent theoretical proposal introduces a novel approach, employing thermal transport measurements to detect these competing phases. Here, we experimentally explore the bulk thermal transport of the ν = 0 state in bilayer graphene to investigate its ground states and collective excitations associated with isospin. While the theory anticipates a finite thermal conductance in the ν = 0 state, our findings unveil an absence of detectable thermal conductance. Through variations in the external electric field and temperature-dependent measurements, our results suggest towards gapped collective excitations at ν = 0 state. Our findings underscore the necessity for further investigations into the nature of ν = 0.

cond-mat.mes-hall

Low-latency machine learning FPGA accelerator for multi-qubit-state discrimination

Measuring a qubit state is a fundamental yet error-prone operation in quantum computing. These errors can arise from various sources, such as crosstalk, spontaneous state transitions, and excitations caused by the readout pulse. Here, we utilize an integrated approach to deploy neural networks onto field-programmable gate arrays (FPGA). We demonstrate that implementing a fully connected neural network accelerator for multi-qubit readout is advantageous, balancing computational complexity with low latency requirements without significant loss in accuracy. The neural network is implemented by quantizing weights, activation functions, and inputs. The hardware accelerator performs frequency-multiplexed readout of five superconducting qubits in less than 50 ns on a radio frequency system on chip (RFSoC) ZCU111 FPGA, marking the advent of RFSoC-based low-latency multi-qubit readout using neural networks. These modules can be implemented and integrated into existing quantum control and readout platforms, making the RFSoC ZCU111 ready for experimental deployment.

quant-ph

Single-photon induced instabilities in a cavity electromechanical device

Cavity-electromechanical systems are extensively used for sensing and controlling the vibrations of mechanical resonators down to their quantum limit. The nonlinear radiation-pressure interaction in these systems could result in an unstable response of the mechanical resonator showing features such as frequency-combs, period-doubling bifurcations and chaos. However, due to weak light-matter interaction, typically these effects appear at very high driving strengths. By using polariton modes formed by a strongly coupled flux-tunable transmon and a microwave cavity, here we demonstrate an electromechanical device and achieve a single-photon coupling rate $g_0/2π$ of $160~$kHz, which is nearly 4\% of the mechanical frequency $ω_m$. Due to large $g_0/ω_m$ ratio, the device shows an unstable mechanical response resulting in frequency combs in sub-single photon limit. We systematically investigate the boundary of the unstable response and identify two important regimes governed by the optomechanical backaction and the nonlinearity of the electromagnetic mode. Such an improvement in the single-photon coupling rate and the observations of microwave frequency combs at single-photon levels may have applications in the quantum control of the motional states and critical parametric sensing. Our experiments strongly suggest the requirement of newer approaches to understand instabilities.

quant-ph

Instabilities near ultrastrong coupling in microwave optomechanical cavity

With artificially engineered systems, it is now possible to realize the coherent interaction rate, which can become comparable to the mode frequencies, a regime known as ultrastrong coupling (USC). We experimentally realize a cavity-electromechanical device using a superconducting waveguide cavity and a mechanical resonator. In the presence of a strong pump, the mechanical-polaritons splitting can nearly reach 81% of the mechanical frequency, overwhelming all the dissipation rates. Approaching the USC limit, the steady-state response becomes unstable. We systematically measure the boundary of the unstable response while varying the pump parameters. The unstable dynamics display rich phases, such as self-induced oscillations, period-doubling bifurcation, period-tripling oscillations, and ultimately leading to the chaotic behavior. The experimental results and their theoretical modeling suggest the importance of residual nonlinear interaction terms in the weak-dissipative regime.

quant-ph

SQ-CARS: A Scalable Quantum Control and Readout System

Qubits are the basic building blocks of a quantum processor which require electromagnetic pulses in giga hertz frequency range and latency in nanoseconds for control and readout. In this paper, we address three main challenges associated with room temperature electronics used for controlling and measuring superconducting qubits: scalability, direct microwave synthesis, and a unified user interface. To tackle these challenges, we have developed SQ-CARS, a system based on the ZCU111 evaluation kit. SQ-CARS is designed to be scalable, configurable, and phase synchronized, providing multi-qubit control and readout capabilities. The system offers an interactive Python framework, making it user-friendly. Scalability to a larger number of qubits is achieved by deterministic synchronization of multiple channels. The system supports direct synthesis of arbitrary vector microwave pulses using the second-Nyquist zone technique, from 4 to 9 GHz. It also features on-board data processing like tunable low pass filters and configurable rotation blocks, enabling lock-in detection and low-latency active feedback for quantum experiments. All control and readout features are accessible through an on-board Python framework. To validate the performance of SQ-CARS, we conducted various time-domain measurements to characterize a superconducting transmon qubit. Our results were compared against traditional setups commonly used in similar experiments. With deterministic synchronisation of control and readout channels, and an open-source approach for programming, SQ-CARS paves the way for advanced experiments with superconducting qubits.

quant-ph

Prospects of cooling a mechanical resonator with a transmon qubit in c-QED setup

Hybrid devices based on the superconducting qubits have emerged as a promising platform for controlling the quantum states of macroscopic resonators. The nonlinearity added by a qubit can be a valuable resource for such control. Here we study a hybrid system consisting of a mechanical resonator longitudinally coupled to a transmon qubit. The qubit readout can be done by coupling to a readout mode like in c-QED setup. The coupling between the mechanical resonator and transmon qubit can be implemented by modulation of the SQUID inductance. In such a tri-partite system, we analyze the steady-state occupation of the mechanical mode when all three modes are dispersively coupled. We use the quantum-noise and the Lindblad formalism to show that the sideband cooling of the mechanical mode to its ground state is achievable. We further experimentally demonstrate that measurements of the thermomechanical motion is possible in the dispersive limit, while maintaining a large coupling between qubit and mechanical mode. Our theoretical calculations suggest that single-photon strong coupling is within the experimental reach in such hybrid devices.

cond-mat.mes-hall

A fast tunable 3D-transmon architecture for superconducting qubit-based hybrid devices

Superconducting qubits utilize the strong non-linearity of the Josephson junctions. Control over the Josephson nonlinearity, either by a current bias or by the magnetic flux, can be a valuable resource that brings tunability in the hybrid system consisting of superconducting qubits. To enable such a control, here we incorporate a fast-flux line for a frequency tunable transmon qubit in 3D cavity architecture. We investigate the flux-dependent dynamic range, relaxation from unconfined states, and the bandwidth of the flux-line. Using time-domain measurements, we probe transmon's relaxation from higher energy levels after populating the cavity with $\approx 2.1\times10^4$ photons. For the device used in the experiment, we find a resurgence time corresponding to the recovery of coherence to be 4.8~$μ$s. We use a fast-flux line to tune the qubit frequency and demonstrate the swap of a single excitation between cavity and qubit mode. By measuring the deviation in the transferred population from the theoretical prediction, we estimate the bandwidth of the flux line to be $\approx$~100~MHz, limited by the parasitic effect in the design. These results suggest that the approach taken here to implement a fast-flux line in a 3D cavity could be helpful for the hybrid devices based on the superconducting qubit.

quant-ph

Superconducting vortex-charge measurement using cavity electromechanics

As the magnetic field penetrates the surface of a superconductor, it results in the formation of flux-vortices. It has been predicted that the flux-vortices will have a charged vortex core and create a dipolelike electric field. Such a charge trapping in vortices is particularly enhanced in high-T$_c$ superconductors (HTS). Here, we integrate a mechanical resonator made of a thin flake of HTS Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$ into a microwave circuit to realize a cavity-electromechanical device. Due to the exquisite sensitivity of cavity-based devices to the external forces, we directly detect the charges in the flux-vortices by measuring the electromechanical response of the mechanical resonator. Our measurements reveal the strength of surface electric dipole moment due to a single vortex core to be approximately 30~$|e|a_B$, equivalent to a vortex charge per CuO$_2$ layer of $3.7\times 10^{-2}|e|$, where $a_B$ is the Bohr radius and $e$ is the electronic charge.

cond-mat.supr-con

Quantized conductance with non-zero shot noise as a signature of Andreev edge state

Electrical conductance measurements have limited scope in identifying Andreev edge states (AESs), which form the basis for realizing various topological excitations in quantum Hall (QH) - superconductor (SC) junctions. To unambiguously detect AESs, we measure shot noise along with electrical conductance in a graphene based QH-SC junction at integer filling nu=2. Remarkably, we find that the Fano factor of shot noise approaches half when the bias energy is less than the superconducting gap, whereas it is close to zero above the superconducting gap. This is striking, given that, at the same time, the electrical conductance remains quantized at 2e^2/h within and above the superconducting gap. A quantized conductance is expected to produce zero shot noise due to its dissipationless flow. However, at a QH-SC interface, AESs carry the current in the zero-bias limit and an equal mixing of electron and hole like states produces half of the Poissonian shot noise with quantized conductance. The observed results are in accord with our detailed theoretical calculations of electrical conductance and shot noise based on non-equilibrium Green's function method in the presence of disorder. Our results pave the way in using shot noise as a detection tool in the search of exotic topological excitations in QH-SC hybrids.

cond-mat.mes-hall

Coplanar cavity for strong coupling between photons and magnons in van der Waals antiferromagnet

We investigate the performance of niobium nitride superconducting coplanar waveguide resonators towards hybrid quantum devices with magnon-photon coupling. We find internal quality factors ~ 20000 at 20 mK base temperature, in zero magnetic field. We find that by reducing film thickness below 100 nm internal quality factor greater than 1000 can be maintained up to parallel magnetic field of ~ 1 T and perpendicular magnetic field of ~ 100 mT. We further demonstrate strong coupling of microwave photons in these resonators, with magnons in chromium trichloride, a van der Waals antiferromagnet, which shows that these cavities serve as a good platform for studying magnon-photon coupling in 2D magnonics based hybrid quantum systems. We demonstrate strong magnon-photon coupling for both optical and acoustic magnon modes of an antiferromagnet.

cond-mat.mes-hall

Large flux-mediated coupling in hybrid electromechanical system with a transmon qubit

Control over the quantum states of a massive oscillator is important for several technological applications and to test the fundamental limits of quantum mechanics. Addition of an internal degree of freedom to the oscillator could be a valuable resource for such control. Recently, hybrid electromechanical systems using superconducting qubits, based on electric-charge mediated coupling, have been quite successful. Here, we realize a hybrid device, consisting of a superconducting transmon qubit and a mechanical resonator coupled using the magnetic-flux. The coupling stems from the quantum-interference of the superconducting phase across the tunnel junctions. We demonstrate a vacuum electromechanical coupling rate up to 4 kHz by making the transmon qubit resonant with the readout cavity. Consequently, thermal-motion of the mechanical resonator is detected by driving the hybridized-mode with mean-occupancy well below one photon. By tuning qubit away from the cavity, electromechanical coupling can be enhanced to 40 kHz. In this limit, a small coherent drive on the mechanical resonator results in the splitting of qubit spectrum, and we observe interference signature arising from the Landau-Zener-Stückelberg effect. With improvements in qubit coherence, this system offers a novel platform to realize rich interactions and could potentially provide full control over the quantum motional states.

cond-mat.mes-hall

Determining Image similarity with Quasi-Euclidean Metric

Image similarity is a core concept in Image Analysis due to its extensive application in computer vision, image processing, and pattern recognition. The objective of our study is to evaluate Quasi-Euclidean metric as an image similarity measure and analyze how it fares against the existing standard ways like SSIM and Euclidean metric. In this paper, we analyzed the similarity between two images from our own novice dataset and assessed its performance against the Euclidean distance metric and SSIM. We also present experimental results along with evidence indicating that our proposed implementation when applied to our novice dataset, furnished different results than standard metrics in terms of effectiveness and accuracy. In some cases, our methodology projected remarkable performance and it is also interesting to note that our implementation proves to be a step ahead in recognizing similarity when compared to

cs.CV