arXiv subjects

Victor Leong

Publications and source records attributed to Victor Leong.

At least 19 recordsLinked to original sources

arXiv2026

Free-Running Waveguide-Integrated Single-Photon Avalanche Detectors for Visible Light

Waveguide-integrated single-photon avalanche detectors (SPADs) are essential components of integrated photonics platforms for scalable extreme-low-light applications without the use of cryogenics. Here, we demonstrate an integrated SPAD for visible light operating at room temperature in a free-running mode without gating. The device is based on a doped silicon diode end-fire-coupled to a silicon nitride (SiN) photonic integrated circuit (PIC). We investigate a range of lateral and vertical doping profile designs, and operate the devices with a simple current-mode passive quenching circuit. The optimal device is a laterally-doped p-i-n+ SPAD with a maximum photon detection efficiency (PDE) of 1.95 +/- 0.32% for input light at 685 nm wavelength, when reverse-biased at an excess of 1.5 V beyond the breakdown voltage of 15.0 V. We identify promising avenues for improving device performance, which would enable such integrated SPADs to be an attractive choice for cutting-edge integrated photonics solutions in quantum technologies, low-light imaging, and high-speed communications at visible wavelengths.

physics.optics↗

arXiv2025

Squeezed Light Generation in Periodically Poled Thin-Film Lithium Niobate Waveguides

Squeezed states of light play a key role in quantum-enhanced sensing and continuous-variable quantum information processing. Realizing integrated squeezed light sources is crucial for developing compact and scalable photonic quantum systems. In this work, we demonstrate on-chip broadband vacuum squeezing at telecommunication wavelengths on the thin-film lithium niobate (TFLN) platform. Our device integrates periodically poled lithium niobate (PPLN) nanophotonic waveguides with low-loss edge couplers, comprising bilayer inverse tapers and an SU-8 polymer waveguide. This configuration achieves a fiber-to-chip coupling loss of 1.4 dB and a total homodyne detection loss of 4 dB, enabling a measured squeezing level of 1.4 dB. Additional measurements in a more efficient PPLN waveguide (without low-loss couplers) infer an on-chip squeezing level of over 10 dB at a pump power of 62 mW. These results underscore the potential of TFLN platform for efficient and scalable squeezed light generation.

physics.optics↗

arXiv2025

Analysis of Photonic Circuit Losses with Machine Learning Techniques

Low-loss waveguides enable efficient light delivery in photonic circuits, which are essential for high-speed optical communications and scalable implementations of photonic quantum technologies. We study the effects of several fabrication and experimental parameters on the waveguide losses of a silicon nitride integrated photonics platform using various machine learning techniques. Compared to more complex machine learning algorithms, our results show that a simple linear regression model with variable selection offers a lower prediction error with high interpretability. The high interpretability, along with our domain knowledge, led to unique identification of fabrication process dependencies on the final outcome. With these insights, we show that by improving the process flow, it is possible to improve the loss by mitigating the cause in a real experiment.

physics.optics↗

arXiv2024

Responsivity evaluation of photonics integrated photodetectors via pairwise measurements with an attenuation circuit

Integrated photonics platforms offer a compact and scalable solution for developing next-generation optical technologies. For precision applications involving weak signals, the responsivity as well as the accurate calibration of the integrated photodetectors at low optical powers become increasingly important. It remains challenging to perform a calibration traceable to mW-level primary standards without relying on external attenuation setups. Here, we utilize an on-chip attenuation circuit, composed of a series of cascaded directional couplers (DCs), to evaluate the responsivity of integrated photodetectors (PDs) at uW optical power levels with mW inputs to the chip. Moreover, we show that a pairwise measurement method, involving the simultaneous measurement of the integrated PD photocurrent and an auxiliary optical output which is coupled off-chip, systematically improves the experimental uncertainties compared to a direct PD photocurrent measurement. For 3 cascaded DCs, the pairwise measurement improves the repeatability error from 1.21% to 0.22%, with an overall expanded calibration uncertainty (k=2) of 10.13%. The latter is dominated by the scattering noise floor and fiber-to-chip coupling errors, which can be significantly improved with better device fabrication control. Our method can be extended to a fully integrated calibration solution for waveguide-integrated single-photon detectors.

physics.optics↗

arXiv2024

Dielectric Fano Nanoantennas for Enabling Sub-Nanosecond Lifetimes in NV-based Single Photon Emitters

Solid-state quantum emitters are essential sources of single photons, and enhancing their emission rates is of paramount importance for applications in quantum communications, computing, and metrology. One approach is to couple quantum emitters with resonant photonic nanostructures, where the emission rate is enhanced due to the Purcell effect. Dielectric nanoantennas are promising as they provide strong emission enhancement compared to plasmonic ones, which suffer from high Ohmic loss. Here, we designed and fabricated a dielectric Fano resonator based on a pair of silicon (Si) ellipses and a disk, which supports the mode hybridization between quasi-bound-states-in-the-continuum (quasi-BIC) and Mie resonance. We demonstrated the performance of the developed resonant system by interfacing it with single photon emitters (SPEs) based on nitrogen-vacancy (NV-) centers in nanodiamonds (NDs). We observed that the interfaced emitters have a Purcell enhancement factor of ~10, with sub-ns emission lifetime and a polarization contrast of 9. Our results indicate a promising method for developing efficient and compact single-photon sources for integrated quantum photonics applications.

physics.optics↗

arXiv2024

CMOS-compatible photonic integrated circuits on thin-film ScAlN

Scandium aluminum nitride (ScAlN) has recently emerged as an attractive material for integrated photonics due to its favorable nonlinear optical properties and compatibility with CMOS fabrication. Despite the promising and versatile material properties, it is still an outstanding challenge to realize low-loss photonic circuits on thin-film ScAlN-on-insulator wafers. Here, we present a systematic study on the material quality of sputtered thin-film ScAlN produced in a CMOS-compatible 200 mm line, and an optimized fabrication process to yield 400 nm thick, fully etched waveguides. With surface polishing and annealing, we achieve micro-ring resonators with an intrinsic quality factor as high as $1.47\times 10^5$, corresponding to a propagation loss of 2.4 dB/cm. These results serve as a critical step towards developing future large-scale, low-loss photonic integrated circuits based on ScAlN.

physics.optics↗

arXiv2024

Efficient photon-pair generation in layer-poled lithium niobate nanophotonic waveguides

Integrated photon-pair sources are crucial for scalable photonic quantum systems. Thin-film lithium niobate is a promising platform for on-chip photon-pair generation through spontaneous parametric down-conversion (SPDC). However, the device implementation faces practical challenges. Periodically poled lithium niobate (PPLN), despite enabling flexible quasi-phase matching, suffers from poor fabrication reliability and device repeatability, while conventional modal phase matching (MPM) methods yield limited efficiencies due to inadequate mode overlaps. Here, we introduce a layer-poled lithium niobate (LPLN) nanophotonic waveguide for efficient photon-pair generation. It leverages layer-wise polarity inversion through electrical poling to break spatial symmetry and significantly enhance nonlinear interactions for MPM, achieving a notable normalized second-harmonic generation (SHG) conversion efficiency of 4615% W^{-1}cm^{-2}. Through a cascaded SHG and SPDC process, we demonstrate photon-pair generation with a normalized brightness of 3.1*10^6 Hz nm^{-1} mW^{-2} in a 3.3 mm long LPLN waveguide, surpassing existing on-chip sources under similar operating configurations. Crucially, our LPLN waveguides offer enhanced fabrication reliability and reduced sensitivity to geometric variations and temperature fluctuations compared to PPLN devices. We expect LPLN to become a promising solution for on-chip nonlinear wavelength conversion and non-classical light generation, with immediate applications in quantum communication, networking, and on-chip photonic quantum information processing.

physics.optics↗

arXiv2024

Hybrid quantum systems with artificial atoms in solid state

The development of single-platform qubits, predominant for most of the last few decades, has driven the progress of quantum information technologies but also highlighted the limitations of various platforms. Some inherent issues such as charge/spin noise in materials hinder certain platforms, while increased decoherence upon attempts to scale-up severely impact qubit quality and coupling on others. In addition, a universal solution for coherent information transfer between quantum systems remains lacking. By combining one or more qubit platforms, one could potentially create new hybrid platforms that might alleviate significant issues that current single platform qubits suffer from, and in some cases, even facilitate the conversion of static to flying qubits on the same hybrid platform. While nascent, this is an area of rising importance that could shed new light on robust and scalable qubit development and provide new impetus for research directions. Here, we define the requirements for hybrid systems with artificial atoms in solid state, exemplify them with systems that have been proposed or attempted, and conclude with our outlook for such hybrid quantum systems.

quant-ph↗

arXiv2022

Realizing a Robust, Reconfigurable Active Quenching Design for Multiple Types of Single-Photon Avalanche Detectors

Most active quench circuits used for single-photon avalanche photodetectors (APDs) are designed either with discrete components which lack the flexibility of dynamically changing the control parameters, or with custom ASICs which require a long development time and high cost. As an alternative, we present a reconfigurable and robust hybrid design implemented using a System-on-Chip (SoC), which integrates both an FPGA and a microcontroller. We take advantage of the FPGA's speed and reconfiguration capabilities to vary the quench and reset parameters dynamically over a large range, thus allowing our system to operate a variety of APDs without changing the design. The microcontroller enables the remote adjustment of control parameters and calibration of APDs in the field. The ruggedized design uses components with space heritage, thus making it suitable for space-based applications in the fields of telecommunications and quantum key distribution (QKD). We demonstrate our circuit by operating a commercial APD cooled to -20°C with a deadtime of 35ns while maintaining the after-pulsing probability at close to 3%. We also showcase its versatility by operating custom-fabricated chip-scale APDs, which paves the way for automated wafer-scale characterization.

physics.ins-det↗

arXiv2022

Realizing a robust, reconfigurable active quenching design for multiple architectures of single-photon avalanche detectors

Most active quench circuits used for single-photon avalanche detectors are designed either with discrete components which lack the flexibility of dynamically changing the control parameters, or with custom ASICs which require a long development time and high cost. As an alternative, we present a reconfigurable and robust hybrid design implemented using a System-on-Chip (SoC), which integrates both an FPGA and a microcontroller. We take advantage of the FPGA's speed and configuration capabilities to vary the quench and reset parameters dynamically over a large range, thus allowing our circuit to operate with a wide variety of APDs without having to re-design the system. The microcontroller enables the remote adjustment of control parameters and re-calibration of APDs in the field. The ruggedized design uses components with space heritage, thus making it suitable for space-based applications in the fields of telecommunications and quantum key distribution (QKD). We characterize our circuit with a commercial APD cooled to 253K, and obtain a deadtime of 35ns while maintaining the after-pulsing probability at close to 3%. We also demonstrate versatility of the circuit by directly testing custom fabricated chip-scale APDs, which paves the way for automated wafer-scale testing and characterization.

physics.ins-det↗

arXiv2021

Tuning of Silicon Nitride Micro Cavities by Controlled Nanolayer Deposition

Integration of single-photon emitters (SPEs) with resonant photonic structures is a promising approach for realizing compact and efficient single-photon sources for quantum communications, computing, and sensing. Efficient interaction between the SPE and the photonic cavity requires that the cavity's resonance matches the SPE emission line. Here we demonstrate a new method for tuning silicon nitride (Si3N4) microring cavities via controlled deposition of the cladding layers. Guided by numerical simulations, we deposit silicon dioxide (SiO2) nanolayers onto Si3N4 ridge structures in steps of 50 nm. We show tuning of the cavity resonance over a free spectral range (FSR) without degradation of the quality-factor (Q-factor) of the cavity. We then complement this method with localized laser heating for fine-tuning of the cavity. Finally, we verify that the cladding deposition does not alter the position of nanoparticles placed on the cavity, which suggests that our method can be useful for integrating SPEs with photonic structures.

physics.optics↗

arXiv2020

Integrated Avalanche Photodetectors for Visible Light

Integrated photodetectors are essential components of scalable photonics platforms for quantum and classical applications. However, most efforts in the development of such devices to date have been focused on infrared telecommunications wavelengths. Here, we report the first monolithically integrated avalanche photodetector (APD) for visible light. Our devices are based on a doped silicon rib waveguide with a novel end-fire input coupling to a silicon nitride waveguide. We demonstrate a high gain-bandwidth product of 216 $\pm$ 12 GHz at 20 V reverse bias measured for 685 nm input light, with a low dark current of 0.12 $μ$A . This performance is very competitive when benchmarked against other integrated APDs operating in the infrared range. With CMOS-compatible fabrication and integrability with silicon nitride platforms, our devices are attractive for visible-light photonics applications in sensing and communications.

physics.app-ph↗

arXiv2020

Integrated Single Photon Emitters

The realization of scalable systems for quantum information processing and networking is of utmost importance to the quantum information community. However, building such systems is difficult because of challenges in achieving all the necessary functionalities on a unified platform while maintaining stringent performance requirements of the individual elements. A promising approach which addresses this challenge is based on the consolidation of experimental and theoretical capabilities in quantum physics and integrated photonics. Integrated quantum photonics devices allow efficient control and read-out of quantum information while being scalable and cost effective. Here we review recent developments in solid-state single photon emitters coupled with various integrated photonic structures, which form a critical component of future scalable quantum devices. Our work contributes to the further development and realization of quantum networking protocols and quantum logic on a scalable and fabrication-friendly platform.

physics.optics↗

arXiv2019

Simulation of Silicon Waveguide Single-Photon Avalanche Detectors for Integrated Quantum Photonics

Integrated quantum photonics, which allows for the development and implementation of chip-scale devices, is recognized as a key enabling technology on the road towards scalable quantum networking schemes. However, many state-of-the-art integrated quantum photonics demonstrations still require the coupling of light to external photodetectors. On-chip silicon single-photon avalanche diodes (SPADs) provide a viable solution as they can be seamlessly integrated with photonic components, and operated with high efficiencies and low dark counts at temperatures achievable with thermoelectric cooling. Moreover, they are useful in applications such as LIDAR and low-light imaging. In this paper, we report the design and simulation of silicon waveguide-based SPADs on a silicon-on-insulator platform for visible wavelengths, focusing on two device families with different doping configurations: p-n+ and p-i-n+. We calculate the photon detection efficiency (PDE) and timing jitter at an input wavelength of 640 nm by simulating the avalanche process using a 2D Monte Carlo method, as well as the dark count rate (DCR) at 243 K and 300 K. For our simulated parameters, the optimal p-i-n+ SPADs show the best device performance, with a saturated PDE of 52.4 +/- 0.6% at a reverse bias voltage of 31.5 V, full-width-half-max (FWHM) timing jitter of 10 ps, and a DCR of < 5 counts per second at 243 K.

physics.ins-det↗

arXiv2018

Enhancing Optical Readout from Diamond AFM Tips for Quantum Nanosensing

Color centers in diamond are promising candidates for quantum nanosensing applications. The efficient collection of the optical signal is the key to achieving high sensitivity and resolution, but it is limited by the collection optics. Embedding the color centers in diamond microstructures can help to enhance the collection efficiency, but often require challenging fabrication and integration. Here we investigate the photoluminescence (PL) of silicon-vacancy (SiV) centers in commercially available atomic force microscope (AFM) diamond pyramid (DP) tips. We find that the DP geometry efficiently channels PL emitted at the DP apex towards the base, where we experimentally demonstrate an enhanced PL collection of up to 8 times higher compared to other directions. Our experimental observations are in good agreement with numerical simulations using a finite-difference time-domain (FDTD) method. Our results indicate that AFM tips could be an economical, efficient and straightforward way of implementing color-center-based nanosensing as they provide enhanced sensitivity and easy integration with existing AFM platforms.

physics.optics↗

arXiv2018

A Metalens with Near-Unity Numerical Aperture

The numerical aperture (NA) of a lens determines its ability to focus light and its resolving capability. Having a large NA is a very desirable quality for applications requiring small light-matter interaction volumes or large angular collections. Traditionally, a large NA lens based on light refraction requires precision bulk optics that ends up being expensive and is thus also a specialty item. In contrast, metasurfaces allow the lens designer to circumvent those issues producing high NA lenses in an ultra-flat fashion. However, so far, these have been limited to numerical apertures on the same order of traditional optical components, with experimentally reported values of NA <0.9. Here we demonstrate, both numerically and experimentally, a new approach that results in a diffraction limited flat lens with a near-unity numerical aperture (NA>0.99) and sub-wavelength thickness (~λ/3), operating with unpolarized light at 715 nm. To demonstrate its imaging capability, the designed lens is applied in a confocal configuration to map color centers in sub-diffractive diamond nanocrystals. This work, based on diffractive elements able to efficiently bend light at angles as large as 82°, represents a step beyond traditional optical elements and existing flat optics, circumventing the efficiency drop associated to the standard, phase mapping approach.

physics.optics↗

arXiv2017

Varying temperature and silicon content in nanodiamond growth: effects on silicon-vacancy centers

Nanodiamonds containing color centers open up many applications in quantum information processing, metrology, and quantum sensing. In particular, silicon vacancy (SiV) centers are prominent candidates as quantum emitters due to their beneficial optical qualities. Here we characterize nanodiamonds produced by a high-pressure high-temperature method without catalyst metals, focusing on two samples with clear SiV signatures. Different growth temperatures and relative content of silicon in the initial compound between the samples altered their nanodiamond size distributions and abundance of SiV centers. Our results show that nanodiamond growth can be controlled and optimized for different applications.

cond-mat.mtrl-sci↗

arXiv2017

Photon bandwidth dependence of light-matter interaction

We investigate the scattering of single photons by single atoms and, in particular, the dependence of the atomic dynamics and the scattering probability on the photon bandwidth. We tightly focus the incident photons onto a single trapped~$^{87}${Rb} atom and use the time-resolved transmission to characterize the interaction strength. Decreasing the bandwidth of the single photons from 6 to~2 times the atomic linewidth, we observe an increase in atomic peak excitation and photon scattering probability.

quant-ph↗