arXiv subjects

Victor M. R. Zermeno

Publications and source records attributed to Victor M. R. Zermeno.

5 recordsLinked to original sources

arXiv2018

Iterative multi-scale method for accurate estimation of current density and hysteresis losses in large scale HTS systems

In recent years, commercial HTS superconductors have gained an increasing interest for their use in applications involving large-scale superconductor systems. These systems are typically made from hundreds to thousands of turns of conductors. Due to the large number of turns, the simulations of a whole system can become prohibitive in terms of computing time and load. Therefore, an efficient strategy which does not compromise the accuracy of calculations is needed. Recently, a method, based on a multi-scale approach, showed that the computational load can be lowered by simulating, in detail, only several significant tapes from the system. The main limitation of this approach is the inaccuracy of the estimation of the background magnetic field. To address this issue, we consider the following two complementary strategies. The first strategy consists in the iterative implementation of the multi-scale method. The multi-scale method solves itself a dynamic problem, the iterative implementation proposed here is the iterative application of the multi-scale method, and a dynamic solution is obtained at each iteration. The second strategy is a new interpolation method for current distributions, based on the inverse cumulative density function interpolation technique. With respect to conventional interpolation methods, a more realistic current density distribution is then obtained, which allows for a better estimation of the background magnetic field, and consequently, a better estimation of the hysteresis losses. In contrast with previous works, here we do not focus only on the estimation of the hysteresis losses, but also the estimation of background field and the current density distribution is addressed.

physics.comp-ph↗

arXiv2016

Simulation and experiments of Stacks of High Temperature Superconducting Coated Conductors Magnetized by Pulsed Field Magnetization with Multi-Pulse Technique

High temperature superconducting (HTS) bulks or stacks of coated conductors (CCs) can be magnetized to become trapped field magnets (TFMs). The magnetic fields of such TFMs can break the limitation of conventional magnets (<2 T), so they show potential for improving the performance of many electrical applications that use permanent magnets like rotating machines. Towards practical or commercial use of TFMs, effective in situ magnetization is one of the key issues. The pulsed field magnetization (PFM) is among the most promising magnetization methods in virtue of its compactness, mobility and low cost. However, due to the heat generation during the magnetization, the trapped field and flux acquired by PFM usually cannot achieve the full potential of a sample (acquired by the field cooling or zero field cooling method). The multi-pulse technique was found to effectively improve the trapped field by PFM in practice. In this work, a systematic study on the PFM with successive pulses is presented. A 2D electromagnetic-thermal coupled model with comprehensive temperature dependent parameters is used to simulate a stack of CCs magnetized by successive magnetic pulses. An overall picture is built to show how the trapped field and flux evolve with different pulse sequences and the evolution patterns are analyzed. Based on the discussion, an operable magnetization strategy of PFM with successive pulses is suggested to provide more trapped field and flux. Finally, experimental results of a stack of CCs magnetized by typical pulse sequences are presented for demonstration.

cond-mat.supr-con↗

arXiv2014

Self-field Effects and AC Losses in Pancake Coils Assembled from Coated Conductor Roebel Cables

In this contribution we develop a refined numerical model of pancake coils assembled from a coated conductor Roebel cable, which includes the angular dependence of the critical current density $J_c$ on the magnetic field and the actual (three-dimensional) shape of the current lead used to inject the current. Previous works of ours indicate that this latter has an important influence on the measured value of the AC losses. For the simulation of the superconductor, we used two alternative models based on different descriptions of the superconductor's properties and implemented in different mathematical schemes. For the simulation of the current lead we use a full three-dimensional finite-element model. The results of the simulation are compared with measurements and the main issues related to the modeling and the measurement of Roebel coils are discussed in detail.

cond-mat.supr-con↗

arXiv2014

Self-consistent Modeling of the $I_c$ of HTS Devices: How Accurate do Models Really Need to Be?

Numerical models for computing the effective critical current of devices made of HTS tapes require the knowledge of the Jc(B,theta) dependence, i.e. of the way the critical current density Jc depends on the magnetic flux density B and its orientation theta with respect to the tape. In this paper we present a numerical model based on the critical state with angular field dependence of Jc to extract the Jc(B,theta) relation from experimental data. The model takes into account the self-field created by the tape, which gives an important contribution when the field applied in the experiments is low. The same model can also be used to compute the effective critical current of devices composed of electromagnetically interacting tapes. Three examples are considered here: two differently current rated Roebel cables composed of REBCO coated conductors and a power cable prototype composed of Bi-2223 tapes. The critical currents computed with the numerical model show good agreement with the measured ones. The simulations reveal also that several parameter sets in the Jc(B,theta) give an equally good representation of the experimental characterization of the tapes and that the measured Ic values of cables are subjected to the influence of experimental conditions, such as Ic degradation due to the manufacturing and assembling process and non-uniformity of the tape properties. These two aspects make the determination of a very precise Jc(B,theta) expression probably unnecessary, as long as that expression is able to reproduce the main features of the angular dependence. The easiness of use of this model, which can be straightforwardly implemented in finite-element programs able to solve static electromagnetic problems, is very attractive both for researchers and devices manufactures who want to characterize superconducting tapes and calculate the effective critical current of superconducting devices.

cond-mat.supr-con↗

arXiv2013

Calculation of AC losses in stacks and coils made of second generation high temperature superconducting tapes for large scale applications

A homogenization method to model a stack of second generation (2G) High Temperature Superconducting (HTS) tapes under AC applied transport current or magnetic field has been obtained. The idea is to find an anisotropic bulk equivalent for the stack, such that the geometrical layout of the internal alternating structures of insulating, metallic, superconducting and substrate layers is "washed" out while keeping the overall electromagnetic behavior of the original stack. We disregard assumptions upon the shape of the critical region and use a power law E-J relationship allowing for overcritical current densities to be considered. The method presented here allows for a computational speedup factor of up to 2 orders of magnitude when compared to full 2-D simulations taking into account the actual dimensions of the stacks without compromising accuracy.

cond-mat.supr-con↗