arXiv subjects

Viktor Walter

Publications and source records attributed to Viktor Walter.

12 recordsLinked to original sources

arXiv2026

Distributed UAV Formation Control Robust to Relative Pose Measurement Noise

A technique that allows a Formation-Enforcing Control (FEC) derived from graph rigidity theory to interface with a realistic relative localization system onboard lightweight Unmanned Aerial Vehicles (UAVs) is proposed in this paper. The proposed methodology enables reliable real-world deployment of UAVs in tight formations using relative localization systems burdened by non-negligible sensory noise. Such noise otherwise causes undesirable oscillations and drifts in sensor-based formations, and this effect is not sufficiently addressed in existing FEC algorithms. The proposed solution is based on decomposition of the gradient descent-based FEC command into interpretable elements, and then modifying these individually based on the estimated distribution of sensory noise, such that the resulting action limits the probability of overshooting the desired formation. The behavior of the system was analyzed and the practicality of the proposed solution was compared to pure gradient-descent in real-world experiments where it presented significantly better performance in terms of oscillations, deviation from the desired state

cs.RO↗

arXiv2026

Distributed Lloyd-Based algorithm for uncertainty-aware multi-robot under-canopy flocking

In this letter, we present a distributed algorithm for flocking in complex environments that operates at constant altitude, without explicit communication, no a priori information about the environment, and by using only on-board sensing and computation capabilities. We provide sufficient conditions to guarantee collision avoidance with obstacles and other robots without exceeding a desired maximum distance from a predefined set of neighbors (flocking or proximity maintenance constraint) during the mission. The proposed approach allows to operate in crowded scenarios and to explicitly deal with tracking errors and on-board sensing errors. The algorithm was verified through simulations with varying number of UAVs and also through numerous real-world experiments in a dense forest involving up to four UAVs.

cs.RO↗

arXiv2025

Reflection-Based Relative Localization for Cooperative UAV Teams Using Active Markers

Reflections of active markers in the environment are a common source of ambiguity in onboard visual relative localization. This work presents a novel approach that exploits these typically unwanted reflections for onboard relative localization in heterogeneous multi-UAV teams. The method operates without prior knowledge of robot size or predefined marker configurations, remains independent of surface properties, and explicitly accounts for uncertainties caused by surface irregularities, including dynamic water surfaces relevant for marine deployments. We validated the approach in both indoor and outdoor experiments, demonstrating reliable operation across varying lighting conditions and achieving greater effective range (above 30 m) and accuracy than state-of-the-art methods. The video is available under the following link: https://youtu.be/y0zp8cIwkig.

cs.RO↗

arXiv2025

FIMD: Fast Isolated Marker Detection for UV-Based Visual Relative Localisation in Agile UAV Swarms

A novel approach for the fast onboard detection of isolated markers for visual relative localisation of multiple teammates in agile UAV swarms is introduced in this paper. As the detection forms a key component of real-time localisation systems, a three-fold innovation is presented, consisting of an optimised procedure for CPUs, a GPU shader program, and a functionally equivalent FPGA streaming architecture. For the proposed CPU and GPU solutions, the mean processing time per pixel of input camera frames was accelerated by two to three orders of magnitude compared to the \rev{unoptimised state-of-the-art approach}. For the localisation task, the proposed FPGA architecture offered the most significant overall acceleration by minimising the total delay from camera exposure to detection results. Additionally, the proposed solutions were evaluated on various 32-bit and 64-bit embedded platforms to demonstrate their efficiency, as well as their feasibility for applications using low-end UAVs and MAVs. Thus, it has become a crucial enabling technology for agile UAV swarming.

cs.RO↗

arXiv2025

Optical communication-based identification for multi-UAV systems: theory and practice

Mutual relative localization and identification is an important feature for the stabilization and navigation of multi-Unmanned Aerial Vehicle (UAV) systems. Camera-based communications technology, also referred to as Optical Camera Communications (OCC) in the literature, is a novel approach that could bring a valuable solution to such a complex task. In such system, the UAVs are equipped with LEDs that act as beacons and with cameras allowing them to locate the LEDs of other UAVs. Specific blinking sequences are assigned to the LEDs of each of the UAVs in order to uniquely identify them. This camera-based relative localization and identification system is immune to Radio Frequency (RF) electromagnetic interference and operates in Global Navigation satellite (GNSS) denied environments. In addition, since many UAVs are already equipped with cameras, the implementation of this system is inexpensive. In this article, we study in detail the capacity of this system and its limitations. Furthermore, we show how to construct blinking sequences for UAV LEDs in order to improve system performance. Finally, experimental results are presented to corroborate the analytical derivations.

eess.SP↗

arXiv2025

Towards agile multi-robot systems in the real world: Fast onboard tracking of active blinking markers for relative localization

A novel onboard tracking approach enabling vision-based relative localization and communication using Active blinking Marker Tracking (AMT) is introduced in this article. Active blinking markers on multi-robot team members improve the robustness of relative localization for aerial vehicles in tightly coupled multi-robot systems during real-world deployments, while also serving as a resilient communication system. Traditional tracking algorithms struggle with fast-moving blinking markers due to their intermittent appearance in camera frames and the complexity of associating multiple of these markers across consecutive frames. AMT addresses this by using weighted polynomial regression to predict the future appearance of active blinking markers while accounting for uncertainty in the prediction. In outdoor experiments, the AMT approach outperformed state-of-the-art methods in tracking density, accuracy, and complexity. The experimental validation of this novel tracking approach for relative localization and optical communication involved testing motion patterns motivated by our research on agile multi-robot deployment.

cs.RO↗

arXiv2025

On Onboard LiDAR-based Flying Object Detection

A new robust and accurate approach for the detection and localization of flying objects with the purpose of highly dynamic aerial interception and agile multi-robot interaction is presented in this paper. The approach is proposed for use on board of autonomous aerial vehicles equipped with a 3D LiDAR sensor. It relies on a novel 3D occupancy voxel mapping method for the target detection that provides high localization accuracy and robustness with respect to varying environments and appearance changes of the target. In combination with a proposed cluster-based multi-target tracker, sporadic false positives are suppressed, state estimation of the target is provided, and the detection latency is negligible. This makes the system suitable for tasks of agile multi-robot interaction, such as autonomous aerial interception or formation control where fast, precise, and robust relative localization of other robots is crucial. We evaluate the viability and performance of the system in simulated and real-world experiments which demonstrate that at a range of 20m, our system is capable of reliably detecting a micro-scale UAV with an almost 100% recall, 0.2m accuracy, and 20ms delay.

cs.RO↗

arXiv2024

Fast Collective Evasion in Self-Localized Swarms of Unmanned Aerial Vehicles

A novel approach for achieving fast evasion in self-localized swarms of Unmanned Aerial Vehicles (UAVs) threatened by an intruding moving object is presented in this paper. Motivated by natural self-organizing systems, the presented approach of fast and collective evasion enables the UAV swarm to avoid dynamic objects (interferers) that are actively approaching the group. The main objective of the proposed technique is the fast and safe escape of the swarm from an interferer ~discovered in proximity. This method is inspired by the collective behavior of groups of certain animals, such as schools of fish or flocks of birds. These animals use the limited information of their sensing organs and decentralized control to achieve reliable and effective group motion. The system presented in this paper is intended to execute the safe coordination of UAV swarms with a large number of agents. Similar to natural swarms, this system propagates a fast shock of information about detected interferers throughout the group to achieve dynamic and collective evasion. The proposed system is fully decentralized using only onboard sensors to mutually localize swarm agents and interferers, similar to how animals accomplish this behavior. As a result, the communication structure between swarm agents is not overwhelmed by information about the state (position and velocity) of each individual and it is reliable to communication dropouts. The proposed system and theory were numerically evaluated and verified in real-world experiments.

cs.RO↗

arXiv2023

MRS Drone: A Modular Platform for Real-World Deployment of Aerial Multi-Robot Systems

This paper presents a modular autonomous Unmanned Aerial Vehicle (UAV) platform called the Multi-robot Systems (MRS) Drone that can be used in a large range of indoor and outdoor applications. The MRS Drone features unique modularity with respect to changes in actuators, frames, and sensory configuration. As the name suggests, the platform is specially tailored for deployment within a MRS group. The MRS Drone contributes to the state-of-the-art of UAV platforms by allowing smooth real-world deployment of multiple aerial robots, as well as by outperforming other platforms with its modularity. For real-world multi-robot deployment in various applications, the platform is easy to both assemble and modify. Moreover, it is accompanied by a realistic simulator to enable safe pre-flight testing and a smooth transition to complex real-world experiments. In this manuscript, we present mechanical and electrical designs, software architecture, and technical specifications to build a fully autonomous multi UAV system. Finally, we demonstrate the full capabilities and the unique modularity of the MRS Drone in various real-world applications that required a diverse range of platform configurations.

cs.RO↗

arXiv2023

Bio-Inspired Compact Swarms of Unmanned Aerial Vehicles without Communication and External Localization

This article presents a unique framework for deploying decentralized and infrastructure-independent swarms of homogeneous aerial vehicles in the real world without explicit communication. This is a requirement in swarm research, which anticipates that global knowledge and communication will not scale well with the number of robots. The system architecture proposed in this article employs the UVDAR technique to directly perceive the local neighborhood for direct mutual localization of swarm members. The technique allows for decentralization and high scalability of swarm systems, such as can be observed in fish schools, bird flocks, or cattle herds. The bio-inspired swarming model that has been developed is suited for real-world deployment of large particle groups in outdoor and indoor environments with obstacles. The collective behavior of the model emerges from a set of local rules based on direct observation of the neighborhood using onboard sensors only. The model is scalable, requires only local perception of agents and the environment, and requires no communication among the agents. Apart from simulated scenarios, the performance and usability of the entire framework is analyzed in several real-world experiments with a fully-decentralized swarm of UAVs deployed in outdoor conditions. To the best of our knowledge, these experiments are the first deployment of decentralized bio-inspired compact swarms of UAVs without the use of a communication network or shared absolute localization. The entire system is available as open-source at https://github.com/ctu-mrs.

cs.RO↗

arXiv2023

MRS Modular UAV Hardware Platforms for Supporting Research in Real-World Outdoor and Indoor Environments

This paper presents a family of autonomous Unmanned Aerial Vehicles (UAVs) platforms designed for a diverse range of indoor and outdoor applications. The proposed UAV design is highly modular in terms of used actuators, sensor configurations, and even UAV frames. This allows to achieve, with minimal effort, a proper experimental setup for single, as well as, multi robot scenarios. Presented platforms are intended to facilitate the transition from simulations, and simplified laboratory experiments, into the deployment of aerial robots into uncertain and hard-to-model real-world conditions. We present mechanical designs, electric configurations, and dynamic models of the UAVs, followed by numerous recommendations and technical details required for building such a fully autonomous UAV system for experimental verification of scientific achievements. To show strength and high variability of the proposed system, we present results of tens of completely different real-robot experiments in various environments using distinct actuator and sensory configurations.

cs.RO↗

arXiv2021

Design and Deployment of an Autonomous Unmanned Ground Vehicle for Urban Firefighting Scenarios

Autonomous mobile robots have the potential to solve missions that are either too complex or dangerous to be accomplished by humans. In this paper, we address the design and autonomous deployment of a ground vehicle equipped with a robotic arm for urban firefighting scenarios. We describe the hardware design and algorithm approaches for autonomous navigation, planning, fire source identification and abatement in unstructured urban scenarios. The approach employs on-board sensors for autonomous navigation and thermal camera information for source identification. A custom electro{mechanical pump is responsible to eject water for fire abatement. The proposed approach is validated through several experiments, where we show the ability to identify and abate a sample heat source in a building. The whole system was developed and deployed during the Mohamed Bin Zayed International Robotics Challenge (MBZIRC) 2020, for Challenge No. 3 Fire Fighting Inside a High-Rise Building and during the Grand Challenge where our approach scored the highest number of points among all UGV solutions and was instrumental to win the first place.

cs.RO↗