arXiv subjects

Ville Kyrki

Publications and source records attributed to Ville Kyrki.

At least 91 records · Page 5Linked to original sources

arXiv2021

MACRPO: Multi-Agent Cooperative Recurrent Policy Optimization

This work considers the problem of learning cooperative policies in multi-agent settings with partially observable and non-stationary environments without a communication channel. We focus on improving information sharing between agents and propose a new multi-agent actor-critic method called \textit{Multi-Agent Cooperative Recurrent Proximal Policy Optimization} (MACRPO). We propose two novel ways of integrating information across agents and time in MACRPO: First, we use a recurrent layer in critic's network architecture and propose a new framework to use a meta-trajectory to train the recurrent layer. This allows the network to learn the cooperation and dynamics of interactions between agents, and also handle partial observability. Second, we propose a new advantage function that incorporates other agents' rewards and value functions. We evaluate our algorithm on three challenging multi-agent environments with continuous and discrete action spaces, Deepdrive-Zero, Multi-Walker, and Particle environment. We compare the results with several ablations and state-of-the-art multi-agent algorithms such as QMIX and MADDPG and also single-agent methods with shared parameters between agents such as IMPALA and APEX. The results show superior performance against other algorithms. The code is available online at https://github.com/kargarisaac/macrpo.

cs.LG↗

arXiv2021

DDGC: Generative Deep Dexterous Grasping in Clutter

Recent advances in multi-fingered robotic grasping have enabled fast 6-Degrees-Of-Freedom (DOF) single object grasping. Multi-finger grasping in cluttered scenes, on the other hand, remains mostly unexplored due to the added difficulty of reasoning over obstacles which greatly increases the computational time to generate high-quality collision-free grasps. In this work we address such limitations by introducing DDGC, a fast generative multi-finger grasp sampling method that can generate high quality grasps in cluttered scenes from a single RGB-D image. DDGC is built as a network that encodes scene information to produce coarse-to-fine collision-free grasp poses and configurations. We experimentally benchmark DDGC against the simulated-annealing planner in GraspIt! on 1200 simulated cluttered scenes and 7 real world scenes. The results show that DDGC outperforms the baseline on synthesizing high-quality grasps and removing clutter while being 5 times faster. This, in turn, opens up the door for using multi-finger grasps in practical applications which has so far been limited due to the excessive computation time needed by other methods.

cs.RO↗

arXiv2021

Planning for Safe Abortable Overtaking Maneuvers in Autonomous Driving

Overtaking is one of the most challenging tasks in driving, and the current solutions to autonomous overtaking are limited to simple and static scenarios. In this paper, we present a method for behaviour and trajectory planning for safe autonomous overtaking. The proposed method optimizes the trajectory by simultaneously enforcing safety and minimizing intrusion onto the adjacent lane. Furthermore, the method allows the overtaking to be aborted, enabling the autonomous vehicle to merge back in the lane, if safety is compromised, because of e.g. traffic in opposing direction appearing during the maneuver execution. A finite state machine is used to select an appropriate maneuver at each time, and a combination of safe and reachable sets is used to iteratively generate intermediate reference targets based on the current maneuver. A nonlinear model predictive controller then plans dynamically feasible and collision-free trajectories to these intermediate reference targets. Simulation experiments demonstrate that the combination of intermediate reference generation and model predictive control is able to handle multiple behaviors, including following a lead vehicle, overtaking and aborting the overtake, within a single framework.

cs.RO↗

arXiv2021

Towards synthesizing grasps for 3D deformable objects with physics-based simulation

Grasping deformable objects is not well researched due to the complexity in modelling and simulating the dynamic behavior of such objects. However, with the rapid development of physics-based simulators that support soft bodies, the research gap between rigid and deformable objects is getting smaller. To leverage the capability of such simulators and to challenge the assumption that has guided robotic grasping research so far, i.e., object rigidity, we proposed a deep-learning based approach that generates stiffness-dependent grasps. Our network is trained on purely synthetic data generated from a physics-based simulator. The same simulator is also used to evaluate the trained network. The results show improvement in terms of grasp ranking and grasp success rate. Furthermore, our network can adapt the grasps based on the stiffness. We are currently validating the proposed approach on a larger test dataset in simulation and on a physical robot.

cs.RO↗

arXiv2021

Notes on the Behavior of MC Dropout

Among the various options to estimate uncertainty in deep neural networks, Monte-Carlo dropout is widely popular for its simplicity and effectiveness. However the quality of the uncertainty estimated through this method varies and choices in architecture design and in training procedures have to be carefully considered and tested to obtain satisfactory results. In this paper we present a study offering a different point of view on the behavior of Monte-Carlo dropout, which enables us to observe a few interesting properties of the technique to keep in mind when considering its use for uncertainty estimation.

cs.LG↗

arXiv2021

Autoencoding Slow Representations for Semi-supervised Data Efficient Regression

The slowness principle is a concept inspired by the visual cortex of the brain. It postulates that the underlying generative factors of a quickly varying sensory signal change on a slower time scale. Unsupervised learning of intermediate representations utilizing abundant unlabeled sensory data can be leveraged to perform data-efficient supervised downstream regression. In this paper, we propose a general formulation of slowness for unsupervised representation learning adding a slowness regularization term to the estimate lower bound of the beta-VAE to encourage temporal similarity in observation and latent space. Within this framework we compare existing slowness regularization terms such as the L1 and L2 loss used in existing end-to-end methods, the SlowVAE and propose a new term based on Brownian motion. We empirically evaluate these slowness regularization terms with respect to their downstream task performance and data efficiency. We find that slow representations lead to equal or better downstream task performance and data efficiency in different experiment domains when compared to representations without slowness regularization. Finally, we discuss how the Frechet Inception Distance (FID), traditionally used to determine the generative capabilities of GANs, can serve as a measure to predict the performance of pre-trained Autoencoder model in a supervised downstream task and accelerate hyperparameter search.

cs.LG↗

arXiv2021

Affine Transport for Sim-to-Real Domain Adaptation

Sample-efficient domain adaptation is an open problem in robotics. In this paper, we present affine transport -- a variant of optimal transport, which models the mapping between state transition distributions between the source and target domains with an affine transformation. First, we derive the affine transport framework; then, we extend the basic framework with Procrustes alignment to model arbitrary affine transformations. We evaluate the method in a number of OpenAI Gym sim-to-sim experiments with simulation environments, as well as on a sim-to-real domain adaptation task of a robot hitting a hockeypuck such that it slides and stops at a target position. In each experiment, we evaluate the results when transferring between each pair of dynamics domains. The results show that affine transport can significantly reduce the model adaptation error in comparison to using the original, non-adapted dynamics model.

cs.RO↗

arXiv2021

Automatic Assembly Planning based on Digital Product Descriptions

This paper proposes a new concept in which a digital twin derived from a digital product description will automatically perform assembly planning and orchestrate the production resources in a manufacturing cell. Thus the manufacturing cell has generic services with minimal assumptions about what kind of product will be assembled, while the digital product description is designed collaboratively between the designer at an OEM and automated services at potential manufacturers. This has several advantages. Firstly, the resulting versatile manufacturing facility can handle a broad variety of products with minimal or no reconfiguration effort, so it can cost-effectively offer its services to a large number of OEMs. Secondly, a solution is presented to the problem of performing concurrent product design and assembly planning over the organizational boundary. Thirdly, the product design at the OEM is not constrained to the capabilities of specific manufacturing facilities. The concept is presented in general terms in UML and an implementation is provided in a 3D simulation environment using Automation Markup Language for digital product descriptions. Finally, two case studies are presented and applications in a real industrial context are discussed.

cs.RO↗

arXiv2021

Multi-FinGAN: Generative Coarse-To-Fine Sampling of Multi-Finger Grasps

While there exists many methods for manipulating rigid objects with parallel-jaw grippers, grasping with multi-finger robotic hands remains a quite unexplored research topic. Reasoning and planning collision-free trajectories on the additional degrees of freedom of several fingers represents an important challenge that, so far, involves computationally costly and slow processes. In this work, we present Multi-FinGAN, a fast generative multi-finger grasp sampling method that synthesizes high quality grasps directly from RGB-D images in about a second. We achieve this by training in an end-to-end fashion a coarse-to-fine model composed of a classification network that distinguishes grasp types according to a specific taxonomy and a refinement network that produces refined grasp poses and joint angles. We experimentally validate and benchmark our method against a standard grasp-sampling method on 790 grasps in simulation and 20 grasps on a real Franka Emika Panda. All experimental results using our method show consistent improvements both in terms of grasp quality metrics and grasp success rate. Remarkably, our approach is up to 20-30 times faster than the baseline, a significant improvement that opens the door to feedback-based grasp re-planning and task informative grasping. Code is available at https://irobotics.aalto.fi/multi-fingan/.

cs.RO↗

arXiv2021

Domain Curiosity: Learning Efficient Data Collection Strategies for Domain Adaptation

Domain adaptation is a common problem in robotics, with applications such as transferring policies from simulation to real world and lifelong learning. Performing such adaptation, however, requires informative data about the environment to be available during the adaptation. In this paper, we present domain curiosity -- a method of training exploratory policies that are explicitly optimized to provide data that allows a model to learn about the unknown aspects of the environment. In contrast to most curiosity methods, our approach explicitly rewards learning, which makes it robust to environment noise without sacrificing its ability to learn. We evaluate the proposed method by comparing how much a model can learn about environment dynamics given data collected by the proposed approach, compared to standard curious and random policies. The evaluation is performed using a toy environment, two simulated robot setups, and on a real-world haptic exploration task. The results show that the proposed method allows data-efficient and accurate estimation of dynamics.

cs.LG↗

arXiv2021

Imitation learning-based framework for learning 6-D linear compliant motions

We present a novel method for learning from demonstration 6-D tasks that can be modeled as a sequence of linear motions and compliances. The focus of this paper is the learning of a single linear primitive, many of which can be sequenced to perform more complex tasks. The presented method learns from demonstrations only, without any prior information, how to take advantage of mechanical gradients in in-contact tasks, such as assembly, both for translations and rotations. The method assumes there exists a desired linear direction in 6-D which, if followed by the manipulator, leads the robot's end-effector to the goal area shown in the demonstration, either in free space or by leveraging contact through compliance. First, demonstrations are gathered where the teacher explicitly shows the robot how the mechanical gradients can be used as guidance towards the goal. From the demonstrations, a set of directions is computed which would result in the observed motion at each timestep during a demonstration of a single primitive. By observing which direction is included in all these sets, we find a single desired direction which can reproduce the demonstrated motion. Finding the number of compliant axes and their directions in both rotation and translation is based on the assumption that in the presence of a desired direction of motion, all other observed motion is caused by the contact force of the environment, signalling the need for compliance. We evaluate the method on a KUKA LWR4+ robot with test setups imitating typical tasks where a human would use compliance to cope with positional uncertainty. Results show that the method can successfully learn and reproduce compliant motions by taking advantage of the geometry of the task, therefore reducing the need for localization accuracy.

cs.RO↗

arXiv2021

Probabilistic Surface Friction Estimation Based on Visual and Haptic Measurements

Accurately modeling local surface properties of objects is crucial to many robotic applications, from grasping to material recognition. Surface properties like friction are however difficult to estimate, as visual observation of the object does not convey enough information over these properties. In contrast, haptic exploration is time consuming as it only provides information relevant to the explored parts of the object. In this work, we propose a joint visuo-haptic object model that enables the estimation of surface friction coefficient over an entire object by exploiting the correlation of visual and haptic information, together with a limited haptic exploration by a robotic arm. We demonstrate the validity of the proposed method by showing its ability to estimate varying friction coefficients on a range of real multi-material objects. Furthermore, we illustrate how the estimated friction coefficients can improve grasping success rate by guiding a grasp planner toward high friction areas.

cs.RO↗

arXiv2021

DeFINE: Delayed Feedback based Immersive Navigation Environment for Studying Goal-Directed Human Navigation

With the advent of consumer-grade products for presenting an immersive virtual environment (VE), there is a growing interest in utilizing VEs for testing human navigation behavior. However, preparing a VE still requires a high level of technical expertise in computer graphics and virtual reality, posing a significant hurdle to embracing the emerging technology. To address this issue, this paper presents Delayed Feedback based Immersive Navigation Environment (DeFINE), a framework that allows for easy creation and administration of navigation tasks within customizable VEs via intuitive graphical user interfaces and simple settings files. Importantly, DeFINE has a built-in capability to provide performance feedback to participants during an experiment, a feature that is critically missing in other similar frameworks. To show the usability of DeFINE from both experimentalists' and participants' perspectives, a demonstration was made in which participants navigated to a hidden goal location with feedback that differentially weighted speed and accuracy of their responses. In addition, the participants evaluated DeFINE in terms of its ease of use, required workload, and proneness to induce cybersickness. The demonstration exemplified typical experimental manipulations DeFINE accommodates and what types of data it can collect for characterizing participants' task performance. With its out-of-the-box functionality and potential customizability due to open-source licensing, DeFINE makes VEs more accessible to many researchers.

cs.HC↗

arXiv2020

Data-efficient visuomotor policy training using reinforcement learning and generative models

We present a data-efficient framework for solving visuomotor sequential decision-making problems which exploits the combination of reinforcement learning (RL) and latent variable generative models. Our framework trains deep visuomotor policies by introducing an action latent variable such that the feed-forward policy search can be divided into three parts: (i) training a sub-policy that outputs a distribution over the action latent variable given a state of the system, (ii) unsupervised training of a generative model that outputs a sequence of motor actions conditioned on the latent action variable, and (iii) supervised training of the deep visuomotor policy in an end-to-end fashion. Our approach enables safe exploration and alleviates the data-inefficiency problem as it exploits prior knowledge about valid sequences of motor actions. Moreover, we provide a set of measures for evaluation of generative models such that we are able to predict the performance of the RL policy training prior to the actual training on a physical robot. We define two novel measures of disentanglement and local linearity for assessing the quality of latent representations, and complement them with existing measures for assessment of the learned distribution. We experimentally determine the characteristics of different generative models that have the most influence on performance of the final policy training on a robotic picking task.

cs.RO↗

arXiv2020

POMDP Manipulation Planning under Object Composition Uncertainty

Manipulating unknown objects in a cluttered environment is difficult because segmentation of the scene into objects, that is, object composition is uncertain. Due to this uncertainty, earlier work has concentrated on either identifying the "best" object composition and deciding on manipulation actions accordingly, or, tried to greedily gather information about the "best" object composition. Contrary to earlier work, we 1) utilize different possible object compositions in planning, 2) take advantage of object composition information provided by robot actions, 3) take into account the effect of different competing object hypotheses on the actual task to be performed. We cast the manipulation planning problem as a partially observable Markov decision process (POMDP) which plans over possible hypotheses of object compositions. The POMDP model chooses the action that maximizes the long-term expected task specific utility, and while doing so, considers the value of informative actions and the effect of different object hypotheses on the completion of the task. In simulations and in experiments with an RGB-D sensor, a Kinova Jaco and a Franka Emika Panda robot arm, a probabilistic approach outperforms an approach that only considers the most likely object composition and long term planning outperforms greedy decision making.

cs.RO↗

arXiv2020

Few-shot model-based adaptation in noisy conditions

Few-shot adaptation is a challenging problem in the context of simulation-to-real transfer in robotics, requiring safe and informative data collection. In physical systems, additional challenge may be posed by domain noise, which is present in virtually all real-world applications. In this paper, we propose to perform few-shot adaptation of dynamics models in noisy conditions using an uncertainty-aware Kalman filter-based neural network architecture. We show that the proposed method, which explicitly addresses domain noise, improves few-shot adaptation error over a blackbox adaptation LSTM baseline, and over a model-free on-policy reinforcement learning approach, which tries to learn an adaptable and informative policy at the same time. The proposed method also allows for system analysis by analyzing hidden states of the model during and after adaptation.

cs.LG↗

arXiv2020

Hypermap Mapping Framework and its Application to Autonomous Semantic Exploration

Modern intelligent and autonomous robotic applications often require robots to have more information about their environment than that provided by traditional occupancy grid maps. For example, a robot tasked to perform autonomous semantic exploration has to label objects in the environment it is traversing while autonomously navigating. To solve this task the robot needs to at least maintain an occupancy map of the environment for navigation, an exploration map keeping track of which areas have already been visited, and a semantic map where locations and labels of objects in the environment are recorded. As the number of maps required grows, an application has to know and handle different map representations, which can be a burden. We present the Hypermap framework, which can manage multiple maps of different types. In this work, we explore the capabilities of the framework to handle occupancy grid layers and semantic polygonal layers, but the framework can be extended with new layer types in the future. Additionally, we present an algorithm to automatically generate semantic layers from RGB-D images. We demonstrate the utility of the framework using the example of autonomous exploration for semantic mapping.

cs.RO↗

arXiv2020

A Novel Design of Soft Robotic Hand with a Human-inspired Soft Palm for Dexterous Grasping

Soft robotic hands and grippers are increasingly attracting attention as a robotic end-effector. Compared with rigid counterparts, they are safer for human-robot and environment-robot interactions, easier to control, lower cost and weight, and more compliant. Current soft robotic hands have mostly focused on the soft fingers and bending actuators. However, the palm is also essential part for grasping. In this work, we propose a novel design of soft humanoid hand with pneumatic soft fingers and soft palm. The hand is inexpensive to fabricate. The configuration of the soft palm is based on modular design which can be easily applied into actuating all kinds of soft fingers before. The splaying of the fingers, bending of the whole palm, abduction and adduction of the thumb are implemented by the soft palm. Moreover, we present a new design of soft finger, called hybrid bending soft finger (HBSF). It can both bend in the grasping axis and deflect in the side-to-side axis as human-like motion. The functions of the HBSF and soft palm were simulated by SOFA framework. And their performance was tested in experiments. The 6 fingers with 1 to 11 segments were tested and analyzed. The versatility of the soft hand is evaluated and testified by the grasping experiments in real scenario according to Feix taxonomy. And the results present the diversity of grasps and show promise for grasping a variety of objects with different shapes and weights.

cs.RO↗