arXiv subjects

Vincent Bertin

Publications and source records attributed to Vincent Bertin.

At least 19 recordsLinked to original sources

arXiv2026

Viscoelasticity Enhances Contactless Adhesion of Soft Substrates

Understanding adhesion is essential for describing stability, friction, and interfacial dynamics. Here, we investigate the adhesion force dynamics between a rigid sphere and a soft surface without direct contact, mediated by a viscous fluid. By combining controlled experiments, a first-principles visco-elastohydrodynamic theory, and numerical simulations, we demonstrate that viscoelastic relaxation fundamentally modifies elastohydrodynamic adhesion. Rather than simply dissipating energy, viscoelasticity causes the substrate to behave transiently as a stiffer solid, enhancing the maximum adhesive force, changing the early-time force growth for $t^{2/3}$ to $t^{1/3}$, shortening the interaction time, and giving rise to new scaling laws governed by the Deborah number. The two proposed dimensionless parameters, the softness parameter and the Deborah number, define a unified phase diagram connecting three distinct adhesion regimes: classical Reynolds lubrication, elastohydrodynamic adhesion, and the newly identified visco-elastohydrodynamic regime.

cond-mat.soft↗

arXiv2026

Transition from contact to hydrodynamic lubrication over rough surfaces

We present a theoretical analysis of frictional transitions along the Stribeck curve for rough elastic contacts lubricated by a Newtonian fluid. Building on the mean-field framework of Persson and Scaraggi (J. Phys.: Condens. Matter 21 (2009) 185002), we formulate a minimal elastohydrodynamic model that couples contact mechanics and lubrication through a homogenized pressure decomposition. Dimensional analysis reveals three independent dimensionless parameters governing the frictional response, which correspond to a dimensionless speed, normal load, and surface roughness. Using asymptotic expansions, we first characterize the boundary and hydrodynamic lubrication regimes, which arise naturally as the quasistatic and smooth-surface limits of the model. In both limits, the contact morphology converges toward Hertzian contact in the regime of large elastic deformation, with boundary layers regularizing the separation profile at the edge of the contact zone. We then analyze the mixed lubrication regime and derive asymptotic expressions for the friction coefficient in the low- and high-speed limits. At high speeds, friction decomposes into a viscous contribution and a residual contact term, leading to a roughness- and load-dependent criterion for the transition to hydrodynamic lubrication that departs from constant-{\Lambda} ratio theories. At low speeds, friction reduction results from the progressive redistribution of the applied load between asperity contact and hydrodynamic pressure, yielding a characteristic transition speed from boundary to mixed lubrication. These results are summarized in a phase diagram that generalizes the classical Stribeck curve to a multidimensional parameter space.

cond-mat.soft↗

arXiv2024

Viscoelastic lubrication of a submerged cylinder sliding down an incline

Lubrication flows between two solid surfaces can be found in a variety of biological and engineering settings. In many of these systems, the lubricant exhibits viscoelastic properties, which modify the associated lubrication forces. Here, we experimentally study viscoelastic lubrication by considering the motion of a submerged cylinder sliding down an incline. We demonstrate that cylinders move faster when released in a viscoelastic Boger liquid compared to a Newtonian liquid with similar viscosity. Cylinders exhibit pure sliding motion in viscoelastic liquids, in contrast to the stick-slip motion observed in Newtonian liquids. We rationalize our results by using the second-order fluid model, which predicts a lift force on the cylinder arising from the normal-stress differences provided by the dissolved polymers. The interplay between viscoelastic lift, viscous friction, and gravity leads to a prediction for the sliding speed, which is consistent with our experimental results for weakly viscoelastic flows. Finally, we identify a remarkable difference between the lubrication of cylindrical and spherical contacts, as the latter does not exhibit any lift for weak viscoelasticity.

cond-mat.soft↗

arXiv2024

Sticking without contact: Elastohydrodynamic adhesion

The adhesion between dry solid surfaces is typically governed by contact forces, involving surface forces and elasticity. For surfaces immersed in a fluid, out-of-contact adhesion arises due to the viscous resistance to the opening of the liquid gap. While the adhesion between dry solids is described by the classical JKR theory, there is no equivalent framework for the wet adhesion of soft solids. Here, we investigate theoretically the viscous adhesion emerging during the separation of a sphere from an elastic substrate. The suction pressure within the thin viscous film between the solids induces significant elastic displacements. Unexpectedly, the elastic substrate closely follows the motion of the sphere, leading to a sticking without contact. The initial dynamics is described using similarity solutions, resulting in a nonlinear adhesion force that grows in time as F ~ t^(2/3). When elastic displacements become large enough, another similarity solution emerges that leads to a violent snap-off of the adhesive contact through a finite-time singularity. The observed phenomenology bears a strong resemblance with JKR theory, and is relevant for a wide range of applications involving viscous adhesion.

cond-mat.soft↗

arXiv2024

Viscoelastic wetting transition: beyond lubrication theory

The dip-coating geometry, where a solid plate is withdrawn from or plunged into a liquid pool, offers a prototypical example of wetting flows involving contact-line motion. Such flows are commonly studied using the lubrication approximation approach which is intrinsically limited to small interface slopes and thus small contact angles. Flows for arbitrary contact angles, however, can be studied using a generalized lubrication theory that builds upon viscous corner flow solutions. Here we derive this generalized lubrication theory for viscoelastic liquids that exhibit normal stress effects and are modelled using the second-order fluid model. We apply our theory to advancing and receding contact lines in the dip-coating geometry, highlighting the influence of viscoelastic normal stresses for contact line motion at arbitrary contact angle.

cond-mat.soft↗

arXiv2024

Viscoelastic wetting: Cox-Voinov theory with normal stress effects

The classical Cox-Voinov theory of contact line motion provides a relation between the macroscopically observable contact angle, and the microscopic wetting angle as a function of contact line velocity. Here we investigate how viscoelasticity, specifically the normal stress effect, modifies wetting dynamics. Using the thin film equation for the second-order fluid, it is found that the normal stress effect is dominant at small scales. We show that the effect can be incorporated in the Cox-Voinov theory through an apparent microscopic angle, which differs from the true microscopic angle. The theory is applied to the classical problems of drop spreading and dip-coating, which shows how normal stress facilitates (inhibits) the motion of advancing (receding) contact lines. For rapid advancing motion, the apparent microscopic angle can tend to zero in which case the dynamics is described by a new regime that was already anticipated in Boudaoud (2007).

physics.flu-dyn↗

arXiv2024

Similarity solutions in elastohydrodynamic bouncing

We investigate theoretically and numerically the impact of an elastic sphere on a rigid wall in a viscous fluid. Our focus is on the dynamics of the contact, employing the soft lubrication model in which the sphere is separated from the wall by a thin liquid film. In the limit of large sphere inertia, the sphere bounces and the dynamics is close to the Hertz theory. Remarkably, the film thickness separating the sphere from the wall exhibits non-trivial self-similar properties that vary during the spreading and retraction phases. Leveraging these self-similar properties, we establish the energy budget and predict the coefficient of restitution for the sphere. The general framework derived here opens many perspectives to study the lubrication film in impact problems.

cond-mat.soft↗

arXiv2023

Interfacial dripping faucet: generating monodisperse liquid lenses

We present a surface analog to a dripping faucet, where a viscous liquid slides down an immiscible meniscus. Periodic pinch-off of the dripping filament is observed, generating a succession of monodisperse floating lenses. We show that this interfacial dripping faucet can be described analogously to its single-phase counterpart, replacing surface tension by the spreading coefficient, and even undergoes a transition to a jetting regime. This liquid/liquid/gas system opens perspectives for the study of the dynamics of emulsions at interfaces.

physics.flu-dyn↗

arXiv2023

Frozen Cheerios effect: Particle-particle interaction induced by an advancing solidification front

Particles at liquid interfaces have the tendency to cluster due to capillary forces competing with gravitational buoyancy (i.e., normal to the distorted free surface). This is known as the Cheerios effect. Here we experimentally and theoretically study the interaction between two submerged particles near an advancing water-ice interface during the freezing process. Particles that are thermally more conductive than water are observed to attract each other and form clusters once frozen. We call this feature the frozen Cheerios effect, where interactions are driven by alterations to the direction of the experienced repelling force (i.e., normal to the distorted isotherm). On the other hand, particles less conductive than water separate, highlighting the importance of thermal conduction during freezing. Based on existing models for single particle trapping in ice, we develop an understanding of multiple particle interaction. We find that the overall efficacy of the particle-particle interaction critically depends on the solidification front velocity. Our theory explains why the thermal conductivity mismatch between the particles and water dictates the attractive/repulsive nature of the particle-particle interaction.

cond-mat.soft↗

arXiv2023

Unsteady drag force on an immersed sphere oscillating near a wall

The unsteady hydrodynamic drag exerted on an oscillating sphere near a planar wall is addressed experimentally, theoretically, and numerically. The experiments are performed by using colloidal-probe Atomic Force Microscopy (AFM) in thermal noise mode. The natural resonance frequencies and quality factors are extracted from the measurement of the power spectrum density of the probe oscillation for a broad range of gap distances and Womersley numbers. The shift in the natural resonance frequency of the colloidal probe as the probe goes close to a solid wall infers the wall-induced variations of the effective mass of the probe. Interestingly, a crossover from a positive to a negative shift is observed as the Womersley number increases. In order to rationalize the results, the confined unsteady Stokes equation is solved numerically using a finite-element method, as well as asymptotic calculations.The in-phase and out-of-phase terms of the hydrodynamic drag acting on the sphere are obtained and agree well to the experimental results. All together, the experimental, theoretical, and numerical results show that the hydrodynamic force felt by an immersed sphere oscillating near a wall is highly dependent on the Womersley number.

cond-mat.soft↗

arXiv2023

Coalescence of bubbles in a viscoelastic liquid

When two bubbles submerged in a liquid are brought closely together, the intermediate liquid film separating the bubbles begins to drain. Once the film ruptures, the bubbles coalesce and form a neck that expands with time. The dynamics of the neck growth are well understood in the context of pure, Newtonian liquids. Yet, much less is known about the dynamics of this singularity when the surrounding liquid contains long flexible polymers, which provide viscoelastic characteristics to the liquid's properties. Here, we experimentally study the coalescence of bubbles surrounded by polymer solutions. In contrast to drop coalescence, and in spite of the singular stretching of polymers, we find that the presence of the dissolved polymers does not at all affect the coalescence dynamics at early times. The polymer elasticity is found to slow down the flow only during the later stages of coalescence. These observations are interpreted using an asymptotic solution of the Oldroyd-B model, which predicts a strong stress singularity near the extremity of the neck. However, the polymer stress turns out to diverge only in the azimuthal direction, which can explain why elastic effects remain subdominant during the initial stages of coalescence.

physics.flu-dyn↗

arXiv2023

Nanoparticle Taylor dispersion near charged surfaces with an open boundary

The dispersive spreading of microscopic particles in shear flows is influenced both by advection and thermal motion. At the nanoscale, interactions between such particles and their confining boundaries become unavoidable. We address the roles of electrostatic repulsion and absorption on the spatial distribution and dispersion of charged nanoparticles in near-surface shear flows, observed under evanescent illumination. The electrostatic repulsion between particles and the lower charged surface is tuned by varying electrolyte concentrations. Particles leaving the field of vision can be neglected from further analysis, such that the experimental ensemble is equivalent to that of Taylor dispersion with absorption. These two ingredients modify the particle distribution, deviating strongly from the Gibbs-Boltzmann one at the nanoscale studied here. The overall effect is to restrain the accessible space available to particles, leading to a striking, ten-fold reduction in the spreading dynamics as compared to the non-interacting case.

cond-mat.soft↗

arXiv2022

Mechanical response of a thick poroelastic gel in contactless colloidal-probe rheology

When a rigid object approaches a soft material in a viscous fluid, hydrodynamic stresses arise in the lubricated contact region and deform the soft material. The elastic deformation modifies in turn the flow, hence generating a soft-lubrication coupling. Moreover, soft elastomers and gels are often porous. These materials may be filled with solvent or uncrosslinked polymer chains, and might be permeable to the surrounding fluid, which complexifies further the description. Here, we derive the point-force response of a semi-infinite and permeable poroelastic substrate. Then, we use this fundamental solution in order to address the specific poroelastic lubrication coupling associated with contactless colloidal-probe methods. In particular, we derive the conservative and dissipative components of the force associated with the oscillating vertical motion of a sphere close to the poroelastic substrate. Our results may be relevant for dynamic surface force apparatus and contactless colloidal-probe atomic force microscopy experiments on soft, living and/or fragile materials, such as swollen hydrogels and biological membranes.

cond-mat.mtrl-sci↗

arXiv2022

Enhanced Dip Coating on a Soft Substrate

A solid, withdrawn from a liquid bath, entrains a thin liquid film. This simple process, first described by Landau, Levich and Derjaguin (LLD), is commonly observed in everyday life. It also plays a central role in liquid capture by animals, and is widely used for surface-coating purposes in industry. Motivated by the emerging interest in the mechanics of very soft materials, and in particular the resulting elastocapillary coupling, we develop a dip-coating model that accounts for the additional presence of a soft solid layer atop the rigid plate. The elastic response of this soft layer is described by a Winkler's foundation. Using a combination of numerical, scaling and asymptotic-matching methods, we find a new softness-dependent power-law regime for the thickness of entrained liquid at small capillary number, which corresponds to a modified physics at play in the dynamic meniscus. The crossover between this regime and the classical dip-coating one occurs when the substrate's deformation is comparable to the thickness of the entrained liquid film.

cond-mat.soft↗

arXiv2022

Contactless Rheology of Soft Gels over a Broad Frequency Range

We report contactless measurements of the viscoelastic rheological properties of soft gels. The experiments are performed using a colloidal-probe Atomic Force Microscope (AFM) in a liquid environment and in dynamic mode. The mechanical response is measured as a function of the liquid gap thickness for different oscillation frequencies. Our measurements reveal an elastohydrodynamic (EHD) coupling between the flow induced by the probe oscillation and the viscoelastic deformation of the gels. The data are quantitatively described by a viscoelastic lubrication model. The frequency-dependent storage and loss moduli of the polydimethylsiloxane (PDMS) gels are extracted from fits of the data to the model and are in good agreement with the Chasset--Thirion law. Our results demonstrate that contactless colloidal-probe methods are powerful tools that can be used for probing soft interfaces finely over a wide range of frequencies.

cond-mat.mtrl-sci↗

arXiv2021

Soft-lubrication interactions between a rigid sphere and an elastic wall

The motion of an object within a viscous fluid and in the vicinity of a soft surface induces a hydrodynamic stress field that deforms the latter, thus modifying the boundary conditions of the flow. This results in elastohydrodynamic (EHD) interactions experienced by the particle. Here, we derive a soft-lubrication model, in order to compute all the forces and torque applied on a rigid sphere that is free to translate and rotate near an elastic wall. We focus on the limit of small deformations of the surface with respect to the fluid-gap thickness, and perform a perturbation analysis in dimensionless compliance. The response is computed in the framework of linear elasticity, for planar elastic substrates in the limiting cases of thick and thin layers. The EHD forces are also obtained analytically using the Lorentz reciprocal theorem.

cond-mat.soft↗

arXiv2021

Swimming droplet in 1D geometries, an active Bretherton problem

We investigate experimentally the behavior of self-propelled water-in-oil droplets, confined in capillaries of different square and circular cross-sections. The droplet's activity comes from the formation of swollen micelles at its interface. In straight capillaries the velocity of the droplet decreases with increasing confinement. However at very high confinement, the velocity converges toward a non-zero value, so that even very long droplets swim. Stretched circular capillaries are then used to explore even higher confinement. The lubrication layer around the droplet then takes a non-uniform thickness which constitutes a significant difference with usual flow-driven passive droplets. A neck forms at the rear of the droplet, deepens with increasing confinement, and eventually undergoes successive spontaneous splitting events for large enough confinement. Such observations stress the critical role of the activity of the droplet interface on the droplet's behavior under confinement. We then propose an analytical formulation by integrating the interface activity and the swollen micelles transport problem into the classical Bretherton approach. The model accounts for the convergence of the droplet's velocity to a finite value for large confinement, and for the non-classical shape of the lubrication layer. We further discuss on the saturation of the micelles concentration along the interface, which would explain the divergence of the lubrication layer thickness for long enough droplets, eventually leading to the spontaneous droplet division.

cond-mat.soft↗

arXiv2021

Time dependence of advection-diffusion coupling for nanoparticle ensembles

Advection-diffusion coupling can enhance particle and solute dispersion by orders of magnitude as compared to pure diffusion, with a steady state being reached for confined flow regions such as a nanopore or blood vessel. Here, by using evanescent wave microscopy, we measure for the first time the full dynamics of Taylor dispersion, highlighting the crucial role of the initial concentration profile. We make time-dependent, nanometrically-resolved particle dispersion measurements varying nanoparticle size, velocity gradient, and viscosity in sub-micrometric near-surface flows. Such resolution permits a measure of the full dynamical approach and crossover into the steady state, revealing a family of master curves. Remarkably, our results show that the dynamics depend sensitively on the initial spatial distribution of the nanoparticles. These observations are in quantitative agreement with existing analytical models and numerical simulations performed herein. We anticipate that our study will be a first step toward observing and modelling more complex situations at the nanoscale, such as target finding and chemical reactions in nanoconfined flows, dynamical adsorption and capture problems, as well as nanoscale drug delivery systems.

cond-mat.soft↗