arXiv subjects

Vittorio Degli-Esposti

Publications and source records attributed to Vittorio Degli-Esposti.

14 recordsLinked to original sources

arXiv2026

A Ray-Based Characterization of Satellite-to-Urban Propagation

The evolution toward 6G communication systems is expected to rely on integrated three-dimensional network architectures where terrestrial infrastructures coexist with non-terrestrial stations such as satellites, enabling ubiquitous connectivity and service continuity. In this context, accurate channel models for satellite-to-ground propagation in urban environments are essential, particularly for user equipment located at street level where obstruction and multipath effects are significant. This work investigates satellite-to-urban propagation through deterministic ray-tracing simulations. Three representative urban layouts are considered, namely dense urban, urban, and suburban. Multiple use cases are investigated, including handheld devices, vehicular terminals, and fixed rooftop receivers operating across several frequency bands. The analysis focuses on the relative importance of competing propagation mechanisms and on four key channel parameters, namely shadowing standard deviation, Rician $K$-factor, delay spread and Doppler spread, which are relevant for the calibration of channel models to be used in link- and system-level simulations. Results show that elevation and receiver placement strongly shape fading and dispersion, antenna directivity affects shadowing differently under LoS and NLoS conditions, urban morphology produces nontrivial multipath trends, and terminal mobility largely governs Doppler spread.

eess.SP↗

arXiv2026

Ray-Based Simulation of Scattering from Discretized Curved Bodies for Vehicular and ISAC Applications

Realistic modeling of scattering from curved metallic bodies - such as vehicles and roadside structures - is essential for cellular and vehicular channel modeling as well as radar applications. A practical approach is to approximate curved surfaces with planar facets and apply ray-tracing with diffraction methods; however, accuracy depends critically on both geometric discretization and diffraction modeling. This work investigates ray-tracing-based modeling of near-field scattering from curved bodies, both in the backscattering and in the forward (shadow) region; in the ray-tracing tool, diffraction is modeled according to the Uniform Theory of Diffraction (UTD), extended with vertex diffraction and double-bounce interactions, including a heuristic combination of edge and vertex diffraction. A discretization strategy linking facet size to local curvature and wavelength is proposed to balance geometric fidelity, diffraction modeling, and efficiency. Validation is initially performed against analytical solutions and full-wave simulations for canonical geometries (sphere and circular cylinder). Furthermore, the practical applicability of the approach is demonstrated for a realistic vehicle by comparison with bistatic measurements in the backscattering region and full-wave simulation in the shadow region. The results demonstrate that no universal discretization strategy exists: fine meshes are beneficial for accurate backscattering prediction, while coarser discretizations can provide more efficient and accurate shadow region prediction. The proposed extended diffraction framework provides a computationally efficient framework for vehicular propagation and integrated sensing and communication (ISAC) channel modeling.

eess.SP↗

arXiv2026

Super-Resolution Experimental Validation and Polarimetric Extension of the Effective Roughness Diffuse Scattering Models

The experimental validation of diffuse scattering models has long been limited by the inability to spatially separate specular and diffuse contributions in measured channels. This paper overcomes this limitation by combining super-resolution multipath component (MPC) extraction, which resolves individual propagation paths including the specular component, with digital-twin-assisted geometry, enabling the spatial separation of specular and diffuse contributions from bistatic measurements at 28~GHz. Using this framework, we provide the first measurement-driven validation of the Effective Roughness (ER) model with independent characterization of diffuse scattering across ten common building materials, each measured over 266 angular configurations and all polarization combinations (HH, HV, VH, VV). Furthermore, we extend the ER framework by proposing a novel angle-dependent cross-polarization discrimination (XPD) model, capturing the geometry-dependent nature of depolarization that is neglected in existing approaches. The proposed method reproduces the measured diffuse power trends, achieving RMSE values as low as 3 dB across the tested materials, and improves XPD prediction over the baseline constant-XPD model for nearly all material-polarization cases. These results establish a physically consistent and practically viable approach for high-fidelity channel modeling in mmWave systems.

eess.SP↗

arXiv2026

Transform-Invariant Generative Ray Path Sampling for Efficient Radio Propagation Modeling

Ray tracing has become a standard for accurate radio propagation modeling, but suffers from exponential computational complexity, as the number of candidate paths scales with the number of objects raised to the interaction order. This bottleneck limits its use in large-scale or real-time applications, forcing traditional tools to rely on heuristics that reduce path candidates at the cost of potentially reduced accuracy. To overcome this limitation, we propose a machine-learning-assisted framework that replaces exhaustive path searching with intelligent sampling via Generative Flow Networks. Applying these generative models to this domain presents challenges, particularly sparse rewards due to the rarity of valid paths, which can lead to convergence failures and trivial solutions when evaluating high-order interactions in complex environments. To ensure robust learning and efficient exploration, our framework incorporates three key components. First, an \emph{experience replay buffer} captures and retains rare valid paths. Second, a uniform exploratory policy improves generalization and prevents overfitting to simple geometries. Third, a physics-based action masking strategy filters out physically impossible paths before the model considers them. Validated on idealized street-canyon scenarios, our model achieves substantial speedups over exhaustive search -- up to $10\times$ faster on GPU and $100\times$ faster on CPU -- while maintaining high coverage accuracy and successfully uncovering complex propagation paths. However, out-of-distribution evaluations on real-world Manhattan street geometries reveal that generalizing to substantially different urban morphologies requires further advancement in model capacity or alternative training strategies. Source code, tests, and a tutorial are available at https://github.com/jeertmans/sampling-paths.

cs.LG↗

arXiv2025

Towards Generative Ray Path Sampling for Faster Point-to-Point Ray Tracing

Radio propagation modeling is essential in telecommunication research, as radio channels result from complex interactions with environmental objects. Recently, Machine Learning has been attracting attention as a potential alternative to computationally demanding tools, like Ray Tracing, which can model these interactions in detail. However, existing Machine Learning approaches often attempt to learn directly specific channel characteristics, such as the coverage map, making them highly specific to the frequency and material properties and unable to fully capture the underlying propagation mechanisms. Hence, Ray Tracing, particularly the Point-to-Point variant, remains popular to accurately identify all possible paths between transmitter and receiver nodes. Still, path identification is computationally intensive because the number of paths to be tested grows exponentially while only a small fraction is valid. In this paper, we propose a Machine Learning-aided Ray Tracing approach to efficiently sample potential ray paths, significantly reducing the computational load while maintaining high accuracy. Our model dynamically learns to prioritize potentially valid paths among all possible paths and scales linearly with scene complexity. Unlike recent alternatives, our approach is invariant with translation, scaling, or rotation of the geometry, and avoids dependency on specific environment characteristics.

cs.LG↗

arXiv2025

Comparing Differentiable and Dynamic Ray Tracing: Introducing the Multipath Lifetime Map

With the increasing presence of dynamic scenarios, such as Vehicle-to-Vehicle communications, radio propagation modeling tools must adapt to the rapidly changing nature of the radio channel. Recently, both Differentiable and Dynamic Ray Tracing frameworks have emerged to address these challenges. However, there is often confusion about how these approaches differ and which one should be used in specific contexts. In this paper, we provide an overview of these two techniques and a comparative analysis against two state-of-the-art tools: 3DSCAT from UniBo and Sionna from NVIDIA. To provide a more precise characterization of the scope of these methods, we introduce a novel simulation-based metric, the Multipath Lifetime Map, which enables the evaluation of spatial and temporal coherence in radio channels only based on the geometrical description of the environment. Finally, our metrics are evaluated on a classic urban street canyon scenario, yielding similar results to those obtained from measurement campaigns.

eess.SP↗

arXiv2025

Deep Learning-based Human Gesture Channel Modeling for Integrated Sensing and Communication Scenarios

With the development of Integrated Sensing and Communication (ISAC) for Sixth-Generation (6G) wireless systems, contactless human recognition has emerged as one of the key application scenarios. Since human gesture motion induces subtle and random variations in wireless multipath propagation, how to accurately model human gesture channels has become a crucial issue for the design and validation of ISAC systems. To this end, this paper proposes a deep learning-based human gesture channel modeling framework for ISAC scenarios, in which the human body is decomposed into multiple body parts, and the mapping between human gestures and their corresponding multipath characteristics is learned from real-world measurements. Specifically, a Poisson neural network is employed to predict the number of Multi-Path Components (MPCs) for each human body part, while Conditional Variational Auto-Encoders (C-VAEs) are reused to generate the scattering points, which are further used to reconstruct continuous channel impulse responses and micro-Doppler signatures. Simulation results demonstrate that the proposed method achieves high accuracy and generalization across different gestures and subjects, providing an interpretable approach for data augmentation and the evaluation of gesture-based ISAC systems.

eess.SP↗

arXiv2023

White Paper on Radio Channel Modeling and Prediction to Support Future Environment-aware Wireless Communication Systems

COST INTERACT working group (WG)1 aims at increasing the theoretical and experimental understanding of radio propagation and channels in environments of interest and at deriving models for design, simulation, planning and operation of future wireless systems. Wide frequency ranges from sub-GHz to terahertz (THz), potentially high mobility, diverse and highly cluttered environments, dense networks, massive antenna systems, and the use of intelligent surfaces, are some of the challenges for radio channel measurements and modeling for next generation systems. As indicated in [1], with increased number of use cases (e.g., those identified by one6G [2] and shown in Fig. 1) to be supported and a larger number of frequency bands, a paradigm shift in channel measurements and modeling will be required. To address the particular challenges that come with such a paradigm shift, WG1 started the work on relevant topics, ranging from channel sounder design, metrology and measurement methodologies, measurements, modeling, and systematic dataset collection and analysis. In addition to the core activities of WG1, based on the strong interest of the participants, two sub-working groups (subWGs) have been initiated as part of WG1: i) subWG1.1 on millimeter-wave (mmWave) and THz sounding (subWG THz) and ii) subWG1.2 on propagation aspects related to reconfigurable intelligent surfaces (RIS) (subWG RIS). This white paper has two main goals: i) it summarizes the state-of-theart in radio channel measurement and modeling and the key challenges that the scientific community will have to face over the next years to support the development of 6G networks, as identified by WG1 and its subWGs; and ii) it charts the main directions for the work of WG1 and subWGs for the remainder of COST INTERACT duration (i.e., until October 2025).

cs.NI↗

arXiv2022

A Study on mm-wave Propagation in and around Buildings

mm-waves are envisaged as key enabler for 5G and 6G wireless communications, thanks to the wider bandwidth and to the possibility of implementing large-scale antenna arrays and new advanced transmission techniques, such as massive MIMO and beamforming, that can take advantage of the multidimensional properties of the wireless channel. In order to further study the mm-wave wireless channel, where propagation shows different characteristics compared to the sub-6 GHz band, a joint measurement and simulation campaigns in indoor and outdoor microcellular environments has been carried out. The investigation highlights that the traditional assumption that mm-wave NLoS propagation is problematic is not true since significant reflections, scattering and even transmission mechanisms provide good NLoS coverage in most indoor and outdoor scenarios. This also reflects in the limited angle-spread differences between LoS and NLoS locations in some cases. Finally, the contribution of different propagation mechanisms (reflection, diffraction, scattering and combination of them) to the received power is analyzed in the paper with the help of ray tracing simulations.

eess.SP↗

arXiv2022

A Reciprocal Heuristic Model for Diffuse Scattering from Walls and Surfaces

Diffuse scattering of electromagnetic waves from natural and artificial surfaces has been extensively studied in various disciplines, including radio wave propagation, and several diffuse scattering models based on different approaches have been proposed over the years, two of the most popular ones being Kirchhoff Theory and the so-called Effective Roughness heuristic model. The latter, although less rigorous than the former, is more flexible and applicable to a wider range of real-world cases, including non-Gaussian surfaces, surfaces with electrically small correlation lengths and scattering from material inhomogeneities that are often present under the surface. Unfortunately, the Effective Roughness model, with the exception of its Lambertian version, does not satisfy reciprocity, which is an important physical-soundness requirement for any propagation model. In the present work, without compromising its effectiveness and its simple and yet sound power-balance approach, we propose a reciprocal version of the Effective Roughness model, which can be easily implemented and replaced to the old version in ray-based propagation models. The new model is analyzed and compared to the old one and to other popular models. Once properly calibrated, it is shown to yield similar - if not better - performance with respect to the old one when checked vs. measurements.

eess.SP↗

arXiv2022

On Dynamic Ray Tracing and Anticipative Channel Prediction for Dynamic Environments

Ray tracing algorithms, that can simulate multipath radio propagation in presence of geometric obstacles such as buildings, objects or vehicles, are becoming quite popular, due to the increasing availability of digital environment databases and high-performance computation platforms, such as multicore computers and cloud computing services. When objects or vehicles are moving, which is the case of industrial or vehicular environments, multiple successive representations of the environment ("snapshots") and multiple ray tracing runs are often necessary, which require a great human effort and a great deal of computation resources. Recently, the Dynamic Ray Tracing (DRT) approach has been proposed to predict the multipath evolution within a given time lapse on the base of the current multipath geometry, assuming constant speeds and/or accelerations for moving objects, using analytical extrapolation formulas. This is done without re-running a full ray tracing for every "snapshot" of the environment, therefore with a great computation time saving. When DRT is embedded in a mobile radio system and used in real-time, ahead-of-time (or anticipative) field prediction is possible that opens the way to interesting applications. In the present work, a full-3D DRT algorithm is presented that allows to account for multiple reflections, edge diffraction and diffuse scattering for the general case where moving objects can translate and rotate. For the purpose of validation, the model is first applied to some ideal cases and then to realistic cases where results are compared with conventional ray tracing simulation and measurements available in the literature.

eess.SP↗

arXiv2021

An UAV-based Experimental Setup for Propagation Characterization in Urban Environment

A measurement setup made of millimeter-wave and ultra wideband transceivers mounted on both a customized UAV and a ground station for full 3D wireless propagation analysis is described in this work. The developed system represents a flexible solution for the characterization of wireless channels and especially of urban propagation, as the drone might be easily located almost anywhere from ground level to the buildings rooftop and beyond. The double directional properties of the channel can be achieved by rotating directive antennas at the link ends. Other possible applications in urban contexts include above ground level propagation, outdoor-to-indoor penetration, line-of-sight to non-line-of-sight transition, scattering from buildings and air-to-ground channel characterization for UAV-assisted wireless communications.

eess.SP↗

arXiv2021

Characterizing the UAV-to-Machine UWB Radio Channel in Smart Factories

In this work, the results of Ultra-Wideband air-to-ground measurements carried out in a real-world factory environment are presented and discussed. With intelligent in-dustrial deployments in mind, we envision a scenario where the Unmanned Aerial Vehicle can be used as a supplementary tool for factory operation, optimization and control. Measurements address narrow band and wide band characterization of the wireless radio channel, and can be used for link budget calculation, interference studies and time dispersion assessment in real factories, without the usual limitation for both radio terminals to be close to ground. The measurements are performed at different locations and different heights over the 3.1-5.3 GHz band. Some fundamental propagation parameters values are determined vs. distance, height and propagation conditions. The measurements are complemented with, and compared to, conventional ground-to-ground measurements with the same setup. The conducted measurement campaign gives an insight for realizing wireless applications in smart connected factories, including UAV-assisted applications.

eess.SP↗

arXiv2021

Experimental Characterization of Air-to-ground Propagation at mm-Wave Frequencies in Dense Urban Environment

In the present study, a measurement setup utilizing mm-wave transceivers with steerable directive antennas, mounted on both a customized UAV and a ground station has been used to study Air-to-Ground (A2G) radio links and, more generally, full-3D mm-wave propagation in urban environment. We evaluate the double-directional characteristics of the channel by rotating the antennas, deriving Power-Angle Profiles at both link ends. Preliminary results provide useful understanding of A2G propagation, e.g. the influence of the antenna tilt angles, or the mechanisms allowing for the signal to propagate from street canyons to the air.

eess.SP↗