arXiv subjects

Vladimir M. Fomin

Publications and source records attributed to Vladimir M. Fomin.

15 recordsLinked to original sources

arXiv2026

Trapping magnetic flux quanta in superconducting 3D caps

Magnetic flux quanta in type-II superconductors are topological excitations of the order parameter whose sensitivity to the local environment makes them probes of current density, magnetic fields, and pinning landscapes. Yet, in planar thin films, individual vortices are difficult to manipulate, often requiring intricate nanopatterning or demanding scanning-probe instrumentation. Here, we show that shaping a superconducting thin film into a three-dimensional curved geometry enables controllable vortex trapping under a spatially uniform applied magnetic field. Employing a conformal formulation of the time-dependent Ginzburg-Landau equation, we simulate vortex dynamics in a cap-shaped superconducting membrane and compare it with a planar reference. Curvature converts the uniform applied magnetic field into a nonuniform local normal component, creating a reconfigurable asymmetric rim-pinning potential tunable by magnetic-field orientation. Rotating the magnetic field therefore controls the number and positions of vortices trapped along the rim. Moreover, the asymmetric pinning produces a superconducting diode effect through current-direction-dependent vortex capture. Three-dimensional curvature thus provides a route to engineer local vortex pinning and realize fluxonic devices with magnetic-field-programmable vortex trapping and transport.

cond-mat.supr-con↗

arXiv2025

Vortex ratchet effect in superconductor open nanotubes and nanopetals

Advancements in the fabrication of superconducting 3D nanostructures and the creation of artificial pinning sites pave the way to novel applications and enhancement of nanosensors, bolometers, and quantum interferometers. The dynamics of magnetic flux quanta (Abrikosov vortices) in 3D nanoarchitectures reveal a rich palette of phenomena unseen in planar counterparts. Here, we consider two types of superconductor 3D nanostructures -- open nanotubes and nanopetals -- carrying an azimuthal transport current in a homogeneous external magnetic field. The complex 3D geometry of the structures induces an inhomogeneity of the normal magnetic field and makes the vortices move along preferred paths. By introducing a series of asymmetric pinning sites along these paths, we demonstrate non-reciprocity in the flux transport, which, in the 3D nanostructures, is stronger than in the planar membranes. The enhancement of the vortex ratchet effect manifests via a difference in the vortex depinning current under current reversal in a wider range of magnetic fields. The revealed effect is attributed to the inhomogeneous field-induced vortex channeling through the areas containing the asymmetric pinning sites. Our results demonstrate that the ratchet effect can persist up to higher magnetic fields via extending a superconducting film into the third dimension, without an increase in the number of asymmetric pinning sites.

cond-mat.supr-con↗

arXiv2025

Vortex frequency locking and Shapiro steps in superconductor open nanotubes

The movement of magnetic flux quanta (Abrikosov vortices) in superconductors leads to dissipation and is influenced by various ordering effects arising from vortex-vortex, vortex-defect, and vortex-edge interactions. Under combined dc and ac stimuli, when the distance traveled by fluxons during an ac cycle corresponds to an integer multiple of the vortex lattice period, the superconductor's current-voltage (I-V) curve displays synchronization (Shapiro) steps. However, in planar constrictions, frequency-locking effects rely on a perfectly ordered vortex lattice and are typically observed when periodic vortex pinning arrays dominate over intrinsic uncorrelated disorder. Here, we propose 3D superconducting open nanotubes as systems free of periodic disorder, where the I-V curves are expected to display pronounced Shapiro steps. Using the time-dependent Ginzburg-Landau equation, we attribute the predicted effect to a reduction in the dimensionality of vortex motion. Namely, rolling a planar film into a tube causes the 2D vortex array, which initially moves throughout the film, to evolve into quasi-1D vortex chains that are restricted to areas where the normal component of the magnetic field is near its maximum. The discussed effects are relevant for superconducting devices, where vortex nucleation frequency and voltage stabilization by an external ac stimulus can enhance their operation.

cond-mat.supr-con↗

arXiv2025

Topological Bardeen-Cooper-Schrieffer theory of superconducting quantum rings

Quantum rings have emerged as a playground for quantum mechanics and topological physics, with promising technological applications. Experimentally realizable quantum rings, albeit at the scale of a few nanometers, are 3D nanostructures. Surprisingly, no theories exist for the topology of the Fermi sea of quantum rings, and a microscopic theory of superconductivity in nanorings is also missing. In this paper, we remedy this situation by developing a mathematical model for the topology of the Fermi sea and Fermi surface, which features non-trivial hole pockets of electronic states forbidden by quantum confinement, as a function of the geometric parameters of the nanoring. The exactly solvable mathematical model features two topological transitions in the Fermi surface upon shrinking the nanoring size either, first, vertically (along its axis of revolution) and, then, in the plane orthogonal to it, or the other way round. These two topological transitions are reflected in a kink and in a characteristic discontinuity, respectively, in the electronic density of states (DOS) of the quantum ring, which is also computed. Also, closed-form expressions for the Fermi energy as a function of the geometric parameters of the ring are provided. These, along with the DOS, are then used to derive BCS equations for the superconducting critical temperature of nanorings as a function of the geometric parameters of the ring. The $T_c$ varies non-monotonically with the dominant confinement size and exhibits a prominent maximum, whereas it is a monotonically increasing function of the other, non-dominant, length scale. For the special case of a perfect square toroid (where the two length-scales coincide), the $T_c$ increases monotonically with increasing the confinement size, and in this case, there is just one topological transition.

cond-mat.supr-con↗

arXiv2024

Conformal approach to physics simulations for thin curved 3D membranes

Three-dimensional nanoarchitectures are widely used across various areas of physics, including spintronics, photonics, and superconductivity. In this regard, thin curved 3D membranes are especially interesting for applications in nano- and optoelectronics, sensorics, and information processing, making physics simulations in complex 3D geometries indispensable for unveiling new physical phenomena and the development of devices. Here, we present a general-purpose approach to physics simulations for thin curved 3D membranes, that allows for performing simulations using finite difference methods instead of meshless methods or methods with irregular meshes. The approach utilizes a numerical conformal mapping of the initial surface to a flat domain and is based on the uniformization theorem stating that any simply-connected Riemann surface is conformally equivalent to an open unit disk, a complex plane, or a Riemann sphere. We reveal that for many physical problems involving the Laplace operator and divergence, a flat-domain formulation of the initial problem only requires a modification of the equations of motion and the boundary conditions by including a conformal factor and the mean/Gaussian curvatures. We demonstrate the method's capabilities for case studies of the Schrödinger equation for a charged particle in static electric and magnetic fields for 3D geometries, including C-shaped and ring-shaped structures, as well as for the time-dependent Ginzburg-Landau equation.

cond-mat.supr-con↗

arXiv2024

Vortex motion in reconfigurable three-dimensional superconducting nanoarchitectures

When materials are patterned in three dimensions, there exist opportunities to tailor and create functionalities associated with an increase in complexity, the breaking of symmetries, and the introduction of curvature and non-trivial topologies. For superconducting nanostructures, the extension to the third dimension may trigger the emergence of new physical phenomena, as well as advances in technologies. Here, we harness three-dimensional (3D) nanopatterning to fabricate and control the emergent properties of a 3D superconducting nanostructure. Not only are we able to demonstrate the existence and motion of superconducting vortices in 3D but, with simulations, we show that the confinement leads to a well-defined bending of the vortices within the volume of the structure. Moreover, we experimentally observe a strong geometrical anisotropy of the critical field, through which we achieve the reconfigurable coexistence of superconducting and normal states in our 3D superconducting architecture, and the local definition of weak links. In this way, we uncover an intermediate regime of nanosuperconductivity, where the vortex state is truly three-dimensional and can be designed and manipulated by geometrical confinement. This insight into the influence of 3D geometries on superconducting properties offers a route to local reconfigurable control for future computing devices, sensors, and quantum technologies.

cond-mat.mes-hall↗

arXiv2024

Theory of superconductivity in thin films under an external electric field

The supercurrent field effect is experimentally realized in various nano-scale devices, based on the superconductivity suppression by external electric fields being effective for confined systems. In spite of intense research, a microscopic theory and explanation of this effect is missing. Here, a microscopic theory of phonon-mediated superconductivity in thin films is presented, which accounts for the effect of quantum confinement on the electronic density of states, on the Fermi energy, and on the topology of allowed states in momentum space. By further accounting for the interplay between quantum confinement, the external static electric field, the Thomas-Fermi screening in the electron-phonon matrix element, and the effect of confinement on the Coulomb repulsion parameter, the theory predicts the critical value of the external electric field as a function of the film thickness, above which superconductivity is suppressed. In particular, this critical value of the electric field is the lower the thinner the film, in agreement with recent experimental observations. Crucially, this effect is predicted by the theory when both Thomas-Fermi screening and the Coulomb pseudopotential are taken into account, along with the respective dependence on thin film thickness. This microscopic theory of the supercurrent field-effect opens up new possibilities for electric-field gated quantum materials.

cond-mat.supr-con↗

arXiv2024

Steering of vortices by magnetic-field tilting in superconductor nanotubes

In planar superconductor thin films, the places of nucleation and arrangements of moving vortices are determined by structural defects. However, various applications of superconductors require reconfigurable steering of fluxons, which is hard to realize with geometrically predefined vortex pinning landscapes. Here, on the basis of the time-dependent Ginzburg-Landau equation, we present an approach for steering of vortex chains and vortex jets in superconductor nanotubes containing a slit. The idea is based on tilting of the magnetic field $\mathbf{B}$ at an angle $α$ in the plane perpendicular to the axis of a nanotube carrying an azimuthal transport current. Namely, while at $α=0^\circ$ vortices move paraxially in opposite directions within each half-tube, an increase of $α$ displaces the areas with the close-to-maximum normal component $|B_\mathrm{n}|$ to the close(opposite)-to-slit regions, giving rise to descending (ascending) branches in the induced-voltage frequency spectrum $f_\mathrm{U}(α)$. At lower $B$, upon reaching the critical angle $α_\mathrm{c}$, close-to-slit vortex chains disappear, yielding $f_\mathrm{U}$ of the $nf_1$-type ($n\geq1$: an integer; $f_1$: vortex nucleation frequency). At higher $B$, $f_\mathrm{U}$ is largely blurry because of multifurcations of vortex trajectories, leading to the coexistence of a vortex jet with two vortex chains at $α=90^\circ$. In addition to prospects for tuning of GHz-frequency spectra and steering of vortices as information bits, our findings lay foundations for on-demand tuning of vortex arrangements in 3D superconductor membranes in tilted magnetic fields.

cond-mat.supr-con↗

arXiv2023

Microwave generation and vortex jets in superconductor nanotubes

The dynamics of magnetic flux quanta (Abrikosov vortices) determine the resistive response of superconductors. In pinning-free planar thin films, the penetration and motion of vortices are controlled by edge defects, leading to such arrangements as vortex chains, vortex jets, and phase-slip regimes. Here, relying upon the time-dependent Ginzburg-Landau equation, we predict that these vortex patterns should appear in superconductor open nanotubes even without edge defects, due to the inhomogeneity of the normal magnetic induction component $B_\mathrm{n}$, caused by the 3D tube geometry. The crossing of the half-tubes by dc-driven vortices induces GHz-frequency voltage $U$ oscillations with spectra $U_\mathrm{f}(B)$ evolving between $nf_1$ and $\frac{n}{m}f_1$ [$f_1$: vortex nucleation frequency; $n,m\geq 2$] and blurred in certain ranges of currents and fields. An $nf_1$-spectrum corresponds to a single vortex-chain regime typical for low $B$ and for tubes of small radii. At higher fields, an $\frac{n}{m}f_1$-spectrum points to the presence of $m$ vortex chains in the vortex jets which, in contrast to planar thin films, are not diverging because of constraint to the tube areas where $B_\mathrm{n}$ is close to maximum. A blurry spectrum implies complex arrangements of vortices because of multifurcations of their trajectories. Finally, due to a stronger confinement of single vortex chains in tubes of small radii, we reveal peaks in $dU/dB$ and jumps in the frequency of microwave generation, which occur when the number of fluxons moving in the half-tubes increases by one. In all, our findings are essential for novel 3D superconductor devices which can operate in few- and multi-fluxon regimes.

cond-mat.supr-con↗

arXiv2022

Topological defects in superconducting open nanotubes under gradual and abrupt switch-on of the transport current and magnetic field

We analyze the dynamics of the order parameter in superconducting open nanotubes under a strong transport current in an external homogeneous magnetic field using the time-dependent Ginzburg-Landau equation. Near the critical transport current, the dissipation processes are driven by vortex and phase slip dynamics. The transition between the vortex and phase-slip regimes is found to depend on the external magnetic field only weakly if the magnetic field and/or the transport current are switched on gradually. In the case of an abrupt switch-on of the magnetic field or transport current, the system can be triggered to the stable phase-slip regime, within a certain window of parameters. Finally, a hysteresis effect in the current-voltage characteristics is predicted in superconducting open nanotubes.

cond-mat.supr-con↗

arXiv2020

Switching Propulsion Mechanisms of Tubular Catalytic Micromotors

Different propulsion mechanisms have been suggested for describing the motion of a variety of chemical micromotors, including the bubble-recoil mechanism, which has attracted great attention in the last decades due to its high efficiency and thrust force, enabling several applications in the fields of environmental remediation and biomedicine. Bubble-induced motion has been modeled including three different phenomena: capillarity, bubble growth, and bubble expulsion. However, most of those models have been suggested independently based on a single influencing factor (i.e. viscosity), limiting the understanding of the overall micromotor performance. In this work, we study the combined influence of medium viscosity, surface tension and fuel concentration on the switching behavior between different propulsion mechanisms in the same micromotor. Furthermore, we propose a holistic theoretical model that explains the three propulsion mechanisms, obtaining good agreement with the recorded experimental data.

physics.chem-ph↗

arXiv2017

Superconducting Micro- and Nanohelices

Superconducting micro- and nanohelices are proposed for the first time. A theoretical investigation of the superconducting state in the helical coils at the micro- and nanoscale is performed within the time-dependent Ginzburg-Landau approach. The pattern and number of vortices in a stationary distribution are determined by their confinement to the ultrathin helical spiral and can therefore be efficiently controlled by the helical stripe width and the helical pitch distance for both dense and sparse helices. Quasi-degeneracy of vortex patterns is manifested in the helical spiral when the number of vortices is incommensurable with the total number of half-turns. With increasing radius, superconducting helical spirals provide a physical realization of a transition from the vortex pattern peculiar to an open tube to that of a planar stripe.

cond-mat.supr-con↗

arXiv2015

Phonon Spectrum Engineering in Rolled-up Nano- and Micro-Architectures

We report on a possibility of efficient engineering of the acoustic phonon energy spectrum in multishell tubular structures produced by a novel high-tech method of self-organization of nano- and micro-architectures. The strain-driven roll-up procedure paved the way for novel classes of metamaterials such as single semiconductor radial micro- and nano-crystals and multi-layer spiral micro- and nano-superlattices. The acoustic phonon dispersion is determined by solving the equations of elastodynamics for InAs and GaAs material systems. It is shown that the number of shells is an important control parameter of the phonon dispersion together with the structure dimensions and acoustic impedance mismatch between the superlattice layers. The obtained results suggest that rolled up nano-architectures have potential for thermoelectric applications owing to a possibility of significant reduction of the thermal conductivity without degradation of the electronic transport.

cond-mat.mes-hall↗

arXiv2013

Non-integer optical modes in a Möbius-ring resonator

In-plane polarized light experiences a non-trivial topological evolution as it propagates resonantly in a Möbius ring resonator. The resultant geometric phase varies continuously when changing the light ellipticity, which leads to constructive interference for a non-integer number of wavelengths, and therefore to the occurrence of an arbitrary fractional number of optical modes. The geometric phase in Möbius-ring resonators is topologically robust and implies excellent intrinsic fault-tolerance.

physics.optics↗

arXiv2010

Modeling materials with optimized transport properties

Following demands for materials with peculiar transport properties, e.g. in magnetoelectronics or thermoelectrics, there is a need for materials modeling at the quantum-mechanical level. We combine density-functional with various scale-bridging tools to establish correlations between the macroscopic properties and the atomic structure of materials. For examples, magnetic memory devices exploiting the tunneling magneto-resistance (TMR) effect depend crucially on the spin polarization of the electrodes. Heusler alloys, e.g. Co2MnSi, if perfectly ordered, are ferromagnetic half-metals with (ideally) 100% spin polarization. Their performance as electrodes in TMR devices is limited by atomic disorder and deviations from perfect stoichiometry, but also by interface states at the tunneling barrier. We use ab initio thermodynamics in conjunction with the cluster expansion technique to show that excess manganese in the alloy and at the interface helps to preserve the desired half-metallic property. As another example, nanostructured materials with a reduced thermal conductivity but good electrical conductivity are sought for applications in thermoelectrics. Semiconductor heterostructures with a regular arrangement of nanoscale inclusions ('quantum dot superlattices') hold the promise of a high thermoelectric figure of merit. Our theoretical analysis reveals that an increased figure of merit is to be expected if the quantum dot size, the superlattice period and the doping level are all suitably fine-tuned. Such a superlattice thus constitutes a material whose transport properties are controlled by geometrical features at the nanoscale.

cond-mat.mtrl-sci↗