arXiv subjects

Volker J. Sorger

Publications and source records attributed to Volker J. Sorger.

At least 73 records · Page 4Linked to original sources

arXiv2018

0.52 V-mm ITO-based Mach-Zehnder Modulator in Silicon Photonics

Electro-optic modulators transform electronic signals into the optical domain and are critical components in modern telecommunication networks, RF photonics, and emerging applications in quantum photonics and beam steering. All these applications require integrated and voltage-efficient modulator solutions with compact formfactors that are seamlessly integratable with Silicon photonics platforms and feature near-CMOS material processing synergies. However, existing integrated modulators are challenged to meet these requirements. Conversely, emerging electro-optic materials heterogeneously integrated with Si photonics open a new avenue for device engineering. Indium tin oxide (ITO) is one such compelling material for heterogeneous integration in Si exhibiting formidable electro-optic effect characterized by unity order index at telecommunication frequencies. Here we overcome these limitations and demonstrate a monolithically integrated ITO electro- optic modulator based on a Mach Zehnder interferometer (MZI) featuring a high-performance half-wave voltage and active device length product, VpL = 0.52 V-mm. We show, how that the unity-strong index change enables a 30 micrometer-short pi-phase shifter operating ITO in the index-dominated region away from the epsilon-bear-zero ENZ point. This device experimentally confirms electrical phase shifting in ITO enabling its use in multifaceted applications including dense on-chip communication networks, nonlinearity for activation functions in photonic neural networks, and phased array applications for LiDAR.

physics.app-ph↗

arXiv2018

Neuromorphic photonics with electro-absorption modulators

Photonic neural networks benefit from both the high channel capacity- and the wave nature of light acting as an effective weighting mechanism through linear optics. The neuron's activation function, however, requires nonlinearity which can be achieved either through nonlinear optics or electro-optics. Nonlinear optics, while potentially faster, is challenging at low optical power. With electro-optics, a photodiode integrating the weighted products of a photonic perceptron can be paired directly to a modulator, which creates a nonlinear transfer function for efficient operating. Here we model the activation functions of five types of electro-absorption modulators, analyze their individual performance over varying performance parameters, and simulate their combined effect on the inference of the neural network

physics.app-ph↗

arXiv2018

Microring Resonators Coupling Tunability by Heterogeneous 2D Material Integration

Atomically thin 2D materials provide a wide range of basic building blocks with unique properties, making them ideal for heterogeneous integration with a mature chip platform. An understanding the role of excitons in transition metal dichalcogenides in Silicon photonic platform is a prerequisite for advances in optical communication technology, signal processing, and possibly computing. Here we demonstrate passive tunable coupling by integrating few layers of MoTe2 on a micro-ring resonator. We find a TMD-to-rings circumference coverage length ratio to place the ring into critical coupling to be about 10% as determined from the variation of spectral resonance visibility and loss as a function of TMD coverage. Using this TMD ring heterostructure, we further demonstrate a semi-empirical method to determine the index of an unknown TMD material (nMoTe2 of 4.36+.011i) near for telecommunication-relevant wavelength.

physics.optics↗

arXiv2018

Spectrally-tunable Dielectric Grating-based Metasurface for Broadband Planar Light Concentration

The energy consumption of buildings is increasing at a rapid pace due to urbanization, while net-zero energy buildings powered by renewable sources offer a green and sustainable solution. However, the limited rooftop space available on skyscrapers and multi-story buildings poses a challenge for large-scale integration of solar photovoltaic modules. Conventional photovoltaics solutions such as silicon solar panels block the visible light from entering the building rending them unfeasible to cover all building surfaces. Here, we demonstrate a novel dielectric metasurface (based-on silicon nitride grating) acting as a planar light concentrator. We integrate this functional device onto a window glass transmitting visible light while simultaneously guiding the near infrared portion (NIR) of sunlight to the edges of the glass window where it can be converted to electricity by a small PV module. Utilizing the grating design flexibility, we tune the spectra to enable guiding of the near NIR sunlight portion and realize polarization independence demonstrated using finite difference time domain simulations. Experimentally, we observe about 5.25% of optical guiding efficiency in the NIR region (700-1000 nm), leaving majority of the visible portion to be transmitted for natural room lighting. Integrating the solar cell at the window edge, we find a power conversion efficiency of about 4.2% of NIR light on a prototype of area 25 mm 2. We confirm that the majority of the loss is due to the absorption, scattering and fabrication non-uniformity over large area which can be further optimized in future. Such a functional window combining renewable energy generation, with room lighting, and building-envelope reduction could mitigate urban heat-islanding issues of modern cities.

physics.app-ph↗

arXiv2018

Towards a 2D Printer: A Deterministic Cross Contamination-free Transfer Method for Atomically Layered Materials

Precision and chip contamination-free placement of two-dimensional (2D) materials is expected to accelerate both the study of fundamental properties and novel device functionality. Current transfer methods of 2D materials onto an arbitrary substrate deploy wet chemistry and viscoelastic stamping. However, these methods produce a) significant cross contamination of the substrate due to the lack of spatial selectivity b) may not be compatible with chemically sensitive device structures, and c) are challenged with respect to spatial alignment. Here, we demonstrate a novel method of transferring 2D materials resembling the functionality known from printing; utilizing a combination of a sharp micro-stamper and viscoelastic polymer, we show precise placement of individual 2D materials resulting in vanishing cross contamination to the substrate. Our 2D printer-method results show an aerial cross contamination improvement of two to three orders of magnitude relative to state-of-the-art dry and direct transfer methods. Moreover, we find that the 2D material quality is preserved in this transfer method. Testing this 2D material printer on taped-out integrated Silicon photonic chips, we find that the micro-stamper stamping transfer does not physically harm the underneath Silicon nanophotonic structures such as waveguides or micro-ring resonators receiving the 2D material. Such accurate and substrate-benign transfer method for 2D materials could be industrialized for rapid device prototyping due to its high time-reduction, accuracy, and contamination-free process.

physics.app-ph↗

arXiv2018

Attojoule-Efficient Graphene Optical Modulators

Electro-optic modulation is a technology-relevant function for signal keying, beam steering, or neuromorphic computing through providing the nonlinear activation function of a perceptron. With silicon-based modulators being bulky and inefficient, we here discuss graphene-based devices heterogeneously integrated. This study provides a critical and encompassing discussing of the physics and performance of graphene modulators rather than collecting relevant published work. We provide a holistic analysis of the underlying physics of modulators including the graphenes index tunability, the underlying optical mode, and discuss resulting performance vectors of this novel class of hybrid modulators. Our results show that the reducing the modal area, and reducing the effective broadening of the active material are key to improving device performance defined by the ratio of energy-bandwidth and footprint. We further show how the waveguides polarization must be in-plane with graphene such as given by plasmonic-slot structures. A high device performance can be obtained by introducing multi- or bi-layer graphene modulator designs. Lastly, we present recent results of a graphene-based hybrid-photon-plasmon modulator on a silicon platform, requiring near Boltzmann approximation (100mV) low drive voltages. Being physically compact this 100 aJ/bit modulator opens the path towards a new class of attojoule opto-electronics.

physics.app-ph↗

arXiv2017

Integrated Nanophotonics Architecture for Residue Number System Arithmetic

Residue number system (RNS) enables dimensionality reduction of an arithmetic problem by representing a large number as a set of smaller integers, where the number is decomposed by prime number factorization using the moduli as basic functions. These reduced problem sets can then be processed independently and in parallel, thus improving computational efficiency and speed. Here we show an optical RNS hardware representation based on integrated nanophotonics. The digit-wise shifting in RNS arithmetic is expressed as spatial routing of an optical signal in 2x2 hybrid photonic-plasmonic switches. Here the residue is represented by spatially shifting the input waveguides relative to the routers outputs, where the moduli are represented by the number of waveguides. By cascading the photonic 2x2 switches, we design a photonic RNS adder and a multiplier forming an all-to-all sparse directional network. The advantage of this photonic arithmetic processor is the short (10's ps) computational execution time given by the optical propagation delay through the integrated nanophotonic router. Furthermore, we show how photonic processing in-the-network leverages the natural parallelism of optics such as wavelength-division-multiplexing or optical angular momentum in this RNS processor. A key application for photonic RNS is the functional analysis convolution with widespread usage in numerical linear algebra, computer vision, language- image- and signal processing, and neural networks.

cs.ET↗

arXiv2017

Waveguide based Electroabsorption Modulator Performance

Electro-optic modulation is a key function for data communication. Given the vast amount of data handled, understanding the intricate physics and trade-offs of modulators on-chip allows revealing performance regimes not explored yet. Here we show a holistic performance analysis for waveguide-based electro-absorption modulators. Our approach centers around material properties revealing obtainable optical absorption leading to effective modal cross-section, and material broadening effects. Taken together both describe the modulator physical behavior entirely. We consider a plurality of material modulation classes to include two-level absorbers such as quantum dots, free carrier accumulation or depletion such as ITO or Silicon, two-dimensional electron gas in semiconductors such as quantum wells, Pauli blocking in Graphene, and excitons in two-dimensional atomic layered materials such as found in transition metal dichalcogendies. Our results show that reducing the modal area generally improves modulator performance defined by the amount of induced electrical charge, and hence the energy-per-bit function, required switching the signal. We find that broadening increases the amount of switching charge needed. While some material classes allow for reduced broadening such as quantum dots and 2-dimensional materials due to their reduced Coulomb screening leading to increased oscillator strengths, the sharpness of broadening is overshadowed by thermal effects independent of the material class. Further we find that plasmonics allows the switching charge and energy-per-bit function to be reduced by about one order of magnitude compared to bulk photonics. This analysis is aimed as a guide for the community to predict anticipated modulator performance based on both existing and emerging materials.

physics.app-ph↗

arXiv2017

Hybrid Photonic-Plasmonic Non-blocking Broadband 5x5 Router for Optical Networks

Photonic data routing in optical networks overcomes the limitations of electronic routers with respect to data rate, latency, and energy consumption while suffering from dynamic power consumption, non-simultaneous usage of multiple wavelength channels, and large footprints. Here we show the first hybrid photonic-plasmonic, non-blocking, broadband 5x5 router. The compact footprint (<250 μm2) enables high operation speed (480 GHz) requiring only 82 fJ/bit (1.9 dB) of averaged energy consumption (routing loss). The router supports multi-wavelength up to 206 nm in the telecom band. Having a data-capacity of >70 Tbps, thus demonstrating key features required by future high data-throughput optical networks.

physics.app-ph↗

arXiv2017

Low-loss Tunable 1-D ITO-slot Photonic Crystal Nanobeam Cavity

Tunable optical material properties enable novel applications in both versatile metamaterials and photonic components including optical sources and modulators. Transparent conductive oxides (TCOs) are able to highly tune their optical properties with applied bias via altering their free carrier concentration and hence plasma dispersion. The TCO material indium tin oxide (ITO) exhibits unity-strong index changes, and epsilon-near-zero behavior. However, with such tuning the corresponding high optical losses, originating from the fundamental Kramers-Kronig relations, result in low cavity finesse. However, achieving efficient tuning in ITO-cavities without using light matter interaction enhancement techniques such as polaritonic modes, which are inherently lossy, is a challenge. Here we discuss a novel one-dimensional photonic crystal nanobeam cavity to deliver a cavity system offering a wide range of resonance tuning range, while preserving physical compact footprints. We show that a vertical Silicon-slot waveguide incorporating an actively gated-ITO layer delivers ~3.4 nm of tuning. By deploying distributed feedback, we are able to keep the Q-factor moderately high with tuning. Combining this with the sub-diffraction limited mode volume (0.1 (λ/2n)3) from the photonic (non-plasmonic) slot waveguide, facilitates a high Purcell factor exceeding one thousand. This strong light-matter-interaction shows that reducing the mode volume of a cavity outweighs reducing the losses in diffraction limited modal cavities such as those from bulk Si3N4. These tunable cavities enable future modulators and optical sources such as tunable lasers.

physics.optics↗

arXiv2017

Electrical-driven Plasmon Source on Silicon based on Quantum Tunneling

An efficient silicon based light source presents an unreached goal in the field of photonics, due to Silicons indirect electronic band structure preventing direct carrier recombination and subsequent photon emission. Here we utilize inelastically tunneling electrons to demonstrate an electrically driven light emitting silicon based tunnel junction operating at room temperature. We show that such a junction is a source for plasmons driven by the electrical tunnel current. We find that the emission spectrum is not given by the quantum condition where the emission frequency would be proportional to the applied voltage, but the spectrum is determined by the spectral overlap between the energy dependent tunnel current and the modal dispersion of the plasmon. Experimentally we find the highest light outcoupling efficiency corresponding to the skin depth of the metallic contact of this metal insulator semiconductor junction. Distinct from LEDs, the temporal response of this tunnel source is not governed by nanosecond carrier lifetimes known to semiconductors, but rather by the tunnel event itself and Heisenbergs uncertainty principle.

physics.app-ph↗

arXiv2017

Integrated All-Optical Fast Fourier Transform: Design and Sensitivity Analysis

The fast Fourier transform, FFT, is a useful and prevalent algorithm in signal processing. It characterizes the spectral components of a signal, or is used in combination with other operations to perform more complex computations such as filtering, convolution, and correlation. Digital FFTs are limited in speed by the necessity of moving charge within logic gates. An analog temporal FFT in fiber optics has been demonstrated with highest data bandwidth. However, the implementation with discrete fiber optic FFT components is bulky. Here, we present and analyze a design of an optical FFT in Silicon photonics and evaluate its performance with respect to variations in phase and amplitude. We discuss the impact of the deployed devices on the FFTs transfer function quality as defined by the transmission output power as a function of frequency, detuning phase, optical delay, and loss.

eess.SP↗

arXiv2017

MODetector (MOD): A Dual-Functional Optical Modulator-Detector for On-Chip Communication

Physical challenges at the device and interconnect level limit both network and computing energy efficiency. While photonics is being considered to address interconnect bottlenecks, optical routing is still limited by electronic circuitry, requiring substantial overhead for optical-electrical-optical conversion. Here we show a novel design of an integrated broadband photonic-plasmonic hybrid device termed MODetector featuring dual light modulation and detection function to act as an optical transceiver in the photonic network-on-chip. With over 10 dB extinction ratio and 0.8 dB insertion loss at the modulation state, this MODetector provides 0.7 W/A responsivity in the detection state with 36 ps response time. This multi-functional device: (i) eliminates OEO conversion, (ii) reduces optical losses from photodetectors when not needed, and (iii) enables cognitive routing strategies for network-on-chips.

physics.app-ph↗

arXiv2017

Roadmap on Atto-Joule per Bit Modulators

Electrooptic modulation performs the conversion between the electrical and optical domain with applications in data communication for optical interconnects, but also for novel optical compute algorithms such as providing nonlinearity at the output stage of optical perceptrons in neuromorphic analogue optical computing. Since the clock frequency for photonics on chip has a power overhead sweet slot around 10s of GHz, ultrafast modulation may only be required in long distance communication, but not for short onchip links. Here we show a roadmap towards atto Joule per bit efficient modulators on chip as well as some experimental demonstrations of novel plasmon modulators with sub 1fJ per bit efficiencies. We then discuss the first experimental demonstration of a photon plasmon-hybrid Graphene-based electroabsorption modulator on silicon. The device shows a sub 1V steep switching enabled by near ideal electrostatics delivering a high 0.05dB per V um performance requiring only 110 aJ per bit. Improving on this design, we discuss a plasmonic slot based Graphene modulator design, where the polarization of the plasmonic mode matches with Graphenes inplane dimension. Here a push pull dual gating scheme enables 2dB per V um efficient modulation allowing the device to be just 770 nm short for 3dB small signal modulation. This in turn allows for a device-enabled two orders of magnitude improvement of electrical optical co integrated network on chips over electronic only architectures. The latter opens technological opportunities in in cognitive computing, dynamic data-driven applications system, and optical analogue compute engines to include neuromorphic photonic computing.

physics.app-ph↗

arXiv2017

Plasmonic Optical Modulator based on Adiabatic Coupled Waveguides

In atomic multi-level systems, adiabatic elimination is a method used to minimize complicity of the system by eliminating irrelevant and strongly coupled levels by detuning them from one-another. Such a three-level system, for instance, can be mapped onto physical in form of a three-waveguide system. Actively detuning the coupling strength between the respective waveguide modes allows modulating light propagating through the device, as proposed here. The outer waveguides act as an effective two- photonic-mode system similar to ground- and excited states of a three-level atomic system, whilst the center waveguide is partially plasmonic. In adiabatic elimination regime, the amplitude of the middle waveguide oscillates much faster in comparison to the outer waveguides leading to a vanishing field build up. As a result, the middle waveguide becomes a dark state and hence a low insertion-loss of 8 decibel is expected to keep when achieving the modulation depth as high as 70 decibel despite the involvement of a plasmonic waveguide in the design presented here. The modulation mechanism relies on switching this waveguide system from a critical coupling regime to adiabatic elimination condition via electrostatically tuning the free-carrier concentration and hence the optical index of a thin ITO layer residing in the plasmonic center waveguide. This alters the effective coupling length and the phase mismatching condition thus modulation in each of outer waveguides. Our results show a modulator energy efficiency as low as 40 atto-joule per bit and an extinction ratio of 50 decibel. Given the minuscule footprint of the modulator, the resulting lumped-element limited RC delay is expected to exceed 200 giga hertz. This type of modulator paves the way for next-generation both energy-and speed conscience optical short-reach interconnects.

physics.optics↗

arXiv2017

Analytical approach of Brillouin Amplification over threshold

We report on an accurate closed form analytical model for the gain of a Brillouin fiber amplifier that accounts for material loss in the depleted pump regime. We determined the operational model limits with respect to its relevant parameters and pump regimes through both numerical and experimental validation. As such, our results enable accurate performance prediction of Brillouin fiber amplifiers operating in the weak pump, high gain, and saturation regimes alike.

physics.optics↗

arXiv2017

Temperature Dependence of a Sub-wavelength Compact Graphene Plasmon-Slot Modulator

We investigate a plasmonic electro-optic modulator with an extinction ratio exceeding 1 dB/um by engineering the optical mode to be in-plane with the graphene layer, and show how lowering the operating temperature enables steeper switching. We show how cooling Graphene enables steeping thus improving dynamic energy consumption. Further, we show that multi-layer Graphene integrated with a plasmonic slot waveguide allows for in-plane electric field components, and 3-dB device lengths as short as several hundred nanometers only. Compact modulators approaching electronic length-scales pave a way for ultra-dense photonic integrated circuits with smallest footprints

physics.app-ph↗

arXiv2017

Identifying Mirror Symmetry Density with Delay in Spiking Neural Networks

The ability to rapidly identify symmetry and anti-symmetry is an essential attribute of intelligence. Symmetry perception is a central process in human vision and may be key to human 3D visualization. While previous work in understanding neuron symmetry perception has concentrated on the neuron as an integrator, here we show how the coincidence detecting property of the spiking neuron can be used to reveal symmetry density in spatial data. We develop a method for synchronizing symmetry-identifying spiking artificial neural networks to enable layering and feedback in the network. We show a method for building a network capable of identifying symmetry density between sets of data and present a digital logic implementation demonstrating an 8x8 leaky-integrate-and-fire symmetry detector in a field programmable gate array. Our results show that the efficiencies of spiking neural networks can be harnessed to rapidly identify symmetry in spatial data with applications in image processing, 3D computer vision, and robotics.

q-bio.NC↗