arXiv subjects

Vytautas Valuckas

Publications and source records attributed to Vytautas Valuckas.

14 recordsLinked to original sources

arXiv2026

Topology-Enabled Switchable Unidirectional Radiative Band in a Bilayer Photonic Crystal

Controlling how an open photonic system exchanges energy with its environment-and in particular how it radiates into the far field-is a cornerstone of non-Hermitian wave physics and a key enabler for directional photonic functionalities. Here, we propose a new route to robust unidirectional emission based on the non-Hermitian hybridization of resonances localized in spatially separated layers of a hetero-bilayer photonic crystal. By tailoring the interlayer coupling, we engineer hybrid photonc bands that exhibit strong unidirectional radiation across a broad spectral and momentum range while maintaining theoretically high quality factors. This asymmetric emission is organized by a topological vortex in a pseudo-polarization field defined from the front/back intensity imbalance, which endows the directionality with robustness against perturbations. We further show that, by tuning the surrounding refractive index, this singularity can be displaced in parameter space, enabling reversible switching of the emission direction and a reconfigurable far-field response. This framework opens perspectives for topological photonic sensing and for directional and switchable light sources, including unidirectional lasing supported by high-quality-factor modes.

physics.optics↗

arXiv2025

Hybridization of Non-Hermitian Topological Interface Modes

We propose and experimentally demonstrate the hybridization of radiating topological interface states, analogous to Jackiw-Rebbi states but in gain media with radiation fields. This hybridization not only modifies energy levels under a strong coupling scheme but also significantly reshapes far-field radiation characteristics. The bonding mode exhibits sub-radiant, omnidirectional emission, while the antibonding mode becomes super-radiant and highly unidirectional. Crucially, this non-Hermitian hybridization is tunable, allowing simultaneous control of energy splitting, quality factor, and far-field radiation by varying the distance between the two topological interfaces. Our findings establish hybridized radiating topological interface states as a robust platform for engineering two-level systems with tailored far-field responses, offering new possibilities for applications in beam shaping, nonlinear optics, quantum technologies, and beyond.

physics.optics↗

arXiv2024

Micrometer-resolution fluorescence and lifetime mappings of CsPbBr$_3$ nanocrystal films coupled with a TiO$_2$ grating

Enhancing light emission from perovskite nanocrystal (NC) films is essential in light-emitting devices, as their conventional stacks often restrict the escape of emitted light. This work addresses this challenge by employing a TiO$_2$ grating to enhance light extraction and shape the emission of CsPbBr$_3$ nanocrystal films. Angle-resolved photoluminescence (PL) demonstrated a tenfold increase in emission intensity by coupling the Bloch resonances of the grating with the spontaneous emission of the perovskite NCs. Fluorescence lifetime imaging microscopy (FLIM) provided micrometer-resolution mapping of both PL intensity and lifetime across a large area, revealing a decrease in PL lifetime from 8.2 ns for NC films on glass to 6.1 ns on the TiO$_2$ grating. Back focal plane (BFP) spectroscopy confirmed how the Bloch resonances transformed the unpolarized, spatially incoherent emission of NCs into polarized and directed light. These findings provide further insights into the interactions between dielectric nanostructures and perovskite NC films, offering possible pathways for designing better performing perovskite optoelectronic devices.

physics.optics↗

arXiv2023

Dual-resonance nanostructures for colour down-conversion of colloidal quantum emitters

Linear colour conversion is a process where an emitter absorbs a photon and then emits another photon with either higher or lower energy, corresponding to up- or down conversion, respectively. In this regard, the presence of a volumetric cavity plays a crucial role in enhancing absorption and photoluminescence (PL), as it allows for large volumes of interaction between the exciting photons and the emissive materials, maximising the colour conversion efficiency. Here, we present a dual resonance nanostructure made of a titanium dioxide (TiO2) subwavelength grating to enhance the colour down-conversion efficiency of green light at ~530 nm emitted by gradient alloyed CdxZn1-xSeyS1-y colloidal quantum dots (QDs) when excited with a blue light at ~460 nm. A large mode volume can be created within the QD layer by the hybridisation of the grating resonances and waveguide modes. This allows increasing mode overlap between the resonances and the QDs, resulting in large absorption and tailored emission enhancements. Particularly, we achieved polarized light emission with maximum photoluminescence enhancement of ~140 times at a specific angular direction, and a total enhancement of ~34 times within 0.55 numerical aperture (NA) of the collecting objective. The enhancement encompasses absorption enhancement, Purcell enhancement and directionality enhancement (i.e., outcoupling). We achieved total absorption of 35% for green QDs with a remarkably thin colour conversion layer of ~ 400 nm (inclusive of the TiO2 layer). This work provides a guideline for designing large-volume cavities for practical application in absorption/fluorescence enhancement, such as down colour conversion in microLED displays, detectors or photovoltaics.

physics.optics↗

arXiv2023

Near-Unity Emitting, Widely Tailorable and Stable Exciton Concentrators Built from Doubly Gradient 2D Semiconductor Nanoplatelets

The strength of electrostatic interactions (EI) between electrons and holes within semiconductor nanocrystals profoundly impact the performance of their optoelectronic systems, and different optoelectronic devices demand distinct EI strength of the active medium. However, achieving a broad range, fine-tuning of the EI strength for specific optoelectronic applications is a daunting challenge, especially in quasi 2-dimensional core-shell semiconductor nanoplatelets (NPLs), as the epitaxial growth of the inorganic shell along the direction of the thickness that solely contributes to the quantum confined effect significantly undermines the strength of the EI. Herein we propose and demonstrate a novel doubly-gradient (DG) core-shell architecture of semiconductor NPLs for on-demand tailoring of the EI strength by controlling the localized exciton concentration via in-plane architectural modulation, demonstrated by a wide tuning of radiative recombination rate and exciton binding energy. Moreover, these exciton-concentration-engineered DG NPLs also exhibit a near-unity quantum yield, remarkable thermal and photo stability, as well as considerably suppressed self-absorption. As proof-of-concept demonstrations, highly efficient color converters and high-performance light-emitting diodes (external quantum efficiency: 16.9%, maximum luminance: 43,000 cd/m2) have been achieved based on the DG NPLs. This work thus opens up new avenues for developing high-performance colloidal optoelectronic device applications.

physics.optics↗

arXiv2023

An efficient neural optimizer for resonant nanostructures: demonstration of highly-saturated red silicon structural color

Freeform nanostructures have the potential to support complex resonances and their interactions, which are crucial for achieving desired spectral responses. However, the design optimization of such structures is nontrivial and computationally intensive. Furthermore, the current "black box" design approaches for freeform nanostructures often neglect the underlying physics. Here, we present a hybrid data-efficient neural optimizer for resonant nanostructures by combining a reinforcement learning algorithm and Powell's local optimization technique. As a case study, we design and experimentally demonstrate silicon nanostructures with a highly-saturated red color. Specifically, we achieved CIE color coordinates of (0.677, 0.304)-close to the ideal Schrodinger's red, with polarization independence, high reflectance (>85%), and a large viewing angle (i.e., up to ~ 25deg). The remarkable performance is attributed to underlying generalized multipolar interferences within each nanostructure rather than the collective array effects. Based on that, we were able to demonstrate pixel size down to ~400 nm, corresponding to a printing resolution of 65,000 pixels per inch. Moreover, the proposed design model requires only ~300 iterations to effectively search a 13-dimensional design space - an order of magnitude more efficient than the previously reported approaches. Our work significantly extends the free-form optical design toolbox for high-performance flat-optical components and metadevices.

physics.optics↗

arXiv2023

Hybrid Dielectric-Plasmonic Nanoantenna with Multiresonances for Subwavelength Photon Sources

The enhancement of the photoluminescence of quantum dots induced by an optical nanoantenna has been studied considerably, but there is still significant interest in optimizing and miniaturizing such structures, especially when accompanied by an experimental demonstration. Most of the realizations use plasmonic platforms, and some also use all-dielectric nanoantennas, but hybrid dielectric-plasmonic (subwavelength) nanostructures have been very little explored. In this paper, we propose and demonstrate single subwavelength hybrid dielectric-plasmonic optical nanoantennas coupled to localized quantum dot emitters that constitute efficient and bright unidirectional photon sources under optical pumping. To achieve this, we devised a silicon nanoring sitting on a gold mirror with a 10 nm gap in-between, where an assembly of colloidal quantum dots is embedded. Such a structure supports both (radiative) antenna mode and (nonradiative) gap mode resonances, which we exploit for the dual purpose of out-coupling the light emitted by the quantum dots into the far-field with out-of-plane directivity, and for enhancing the excitation of the dots by the optical pump. Moreover, almost independent control of the resonance spectral positions can be achieved by simple tuning of geometrical parameters such as the ring inner and outer diameters, allowing us to conveniently adjust these resonances with respect to the quantum dots emission and absorption wavelengths. Using the proposed architecture, we obtain experimentally average fluorescence enhancement factors up to $654\times$ folds mainly due to high radiative efficiencies, and associated with a directional emission of the photoluminescence into a cone of $\pm 17\degree$ in the direction normal to the sample plane. We believe the solution presented here to be viable and relevant for the next generation of light-emitting devices.

physics.optics↗

arXiv2022

Room-temperature strong coupling in a single photon emitter-dielectric metasurface system

Single-photon sources with high brightness and long coherence time are promising qubit candidates for quantum technology. To this end, interfacing emitters with high-finesse cavities is required, especially in the strong coupling regime, which so far has only been limited to cryogenic temperatures. Here, we experimentally demonstrate, at room temperature, strong coupling between a single photon emitter and a novel cavity based on optical bound states in the continuum. A remarkably large Rabi splitting of ~4 meV is achieved thanks to the combination of the narrow linewidth and large oscillator strength of emitters in hexagonal boron nitride and the efficient photon trapping of the cavity. Our findings unveil new opportunities to realise scalable quantum devices and explore fundamentally new regimes of strong coupling in quantum systems at room-temperature.

quant-ph↗

arXiv2020

Lasing action in single subwavelength particles supporting supercavity modes

On-chip light sources are critical for the realization of fully integrated photonic circuitry. So far, semiconductor miniaturized lasers have been mainly limited to sizes on the order of a few microns. Further reduction of sizes is challenging fundamentally due to the associated radiative losses. While using plasmonic metals helps to reduce radiative losses and sizes, they also introduce Ohmic losses hindering real improvements. In this work, we show that, making use of quasi-bound states in the continuum, or supercavity modes, we circumvent these fundamental issues and realize the smallest purely semiconductor nanolaser thus far. Here, the nanolaser structure is based on a single semiconductor nanocylinder that intentionally takes advantage of the destructive interference between two supported optical modes, namely Fabry-Perot and Mie modes, to obtain a significant enhancement in the quality factor of the cavity. We experimentally demonstrate the concept and obtain optically pumped lasing action using GaAs at cryogenic temperatures. The optimal nanocylinder size is as small as 500 nm in diameter and only 330 nm in height with a lasing wavelength around 825 nm, corresponding to a size-to-wavelength ratio around 0.6. The obtained results pave the way for the development of smaller on-chip light sources free of Ohmic losses, which may find applications in the future photonic circuits.

physics.optics↗

arXiv2019

Control of LED Emission with Functional Dielectric Metasurfaces

The improvement of light-emitting diodes (LEDs) is one of the major goals of optoelectronics and photonics research. While emission rate enhancement is certainly one of the targets, in this regard, for LED integration to complex photonic devices, one would require to have, additionally, precise control of the wavefront of the emitted light. Metasurfaces are spatial arrangements of engineered scatters that may enable this light manipulation capability with unprecedented resolution. Most of these devices, however, are only able to function properly under irradiation of light with a large spatial coherence, typically normally incident lasers. LEDs, on the other hand, have angularly broad, Lambertian-like emission patterns characterized by a low spatial coherence, which makes the integration of metasurface devices on LED architectures extremely challenging. A novel concept for metasurface integration on LED is proposed, using a cavity to increase the LED spatial coherence through an angular collimation. Due to the resonant character of the cavity, extending the spatial coherence of the emitted light does not come at the price of any reduction in the total emitted power. The experimental demonstration of the proposed concept is implemented on a GaP LED architecture including a hybrid metallic-Bragg cavity. By integrating a silicon metasurface on top we demonstrate two different functionalities of these compact devices: directional LED emission at a desired angle and LED emission of a vortex beam with an orbital angular momentum. The presented concept is general, being applicable to other incoherent light sources and enabling metasurfaces designed for plane waves to work with incoherent light emitters.

physics.optics↗

arXiv2019

Phase-only transmissive spatial light modulator based on tunable dielectric metasurface

Rapidly developing augmented reality (AR) and 3D holographic display technologies require spatial light modulators (SLM) with high resolution and viewing angle to be able to satisfy increasing customer demands. Currently available SLMs, as well as their performance, are limited by their large pixel sizes of the order of several micrometres. Further pixel size miniaturization has been stagnant due to the persistent challenge to reduce the inter-pixel crosstalk associated with the liquid crystal (LC) cell thickness, which has to be large enough to accumulate the required 2π phase difference. Here, we propose a concept of tunable dielectric metasurfaces modulated by a liquid crystal environment, which can provide abrupt phase change and uncouple the phase accumulation from the LC cell thickness, ultimately enabling the pixel size miniaturization. We present a proof-of-concept metasurface-based SLM device, configured to generate active beam steering with >35% efficiency and large beam deflection angle of 11°, with LC cell thickness of only 1.5 μm, much smaller than conventional devices. We achieve the pixel size of 1.14 μm corresponding to the image resolution of 877 lp/mm, which is 30 times larger comparing to the presently available commercial SLM devices. High resolution and viewing angle of the metasurface-based SLMs opens up a new path to the next generation of near-eye AR and 3D holographic display technologies.

physics.optics↗

arXiv2018

A Metalens with Near-Unity Numerical Aperture

The numerical aperture (NA) of a lens determines its ability to focus light and its resolving capability. Having a large NA is a very desirable quality for applications requiring small light-matter interaction volumes or large angular collections. Traditionally, a large NA lens based on light refraction requires precision bulk optics that ends up being expensive and is thus also a specialty item. In contrast, metasurfaces allow the lens designer to circumvent those issues producing high NA lenses in an ultra-flat fashion. However, so far, these have been limited to numerical apertures on the same order of traditional optical components, with experimentally reported values of NA <0.9. Here we demonstrate, both numerically and experimentally, a new approach that results in a diffraction limited flat lens with a near-unity numerical aperture (NA>0.99) and sub-wavelength thickness (~λ/3), operating with unpolarized light at 715 nm. To demonstrate its imaging capability, the designed lens is applied in a confocal configuration to map color centers in sub-diffractive diamond nanocrystals. This work, based on diffractive elements able to efficiently bend light at angles as large as 82°, represents a step beyond traditional optical elements and existing flat optics, circumventing the efficiency drop associated to the standard, phase mapping approach.

physics.optics↗

arXiv2015

Generalized Brewster-Kerker effect in dielectric metasurfaces

Polarization is one of the key properties defining the state of light. It was discovered in the early 19th century by Brewster, among others, while studying light reflected from materials at different angles. These studies led to the first polarizers, based on Brewster's effect. One of the most active trends in photonics now is devoted to the study of miniaturized, sub-wavelength devices exhibiting similar, or even improved, functionalities compared to those achieved with bulk optical elements. In the present work, it is theoretically predicted that a properly designed all-dielectric metasurface exhibits a generalized Brewster effect potentially for any angle, wavelength and polarization of choice. The effect is experimentally demonstrated for an array of silicon nanodisks at visible wavelengths. The underlying physics of this effect can be understood in terms of the suppressed scattering at certain angles that results from the interference between the electric and magnetic dipole resonances excited in the nanoparticles, predicted by Kerker in early 80s. This reveals deep connection of Kerker's and Brewster's legacies and opens doors for Brewster phenomenon to new applications in photonics, which are not bonded to a specific polarization or angle of incidence.

physics.optics↗

arXiv2013

Split-ball resonator

We introduce a new concept of split-ball resonator and demonstrate a strong magnetic dipole response for both gold and silver spherical plasmonic nanoparticles with nanometer-scale cuts. Tunability of the magnetic dipole resonance throughout the visible spectral range is demonstrated by changing the depth and width of the nanoscale cut. We realize this novel concept experimentally by employing the laser-induced transfer method to produce near-perfect spheres and helium ion beam milling to make cuts with the nanometer resolution. Due to high quality of the spherical particle shape governed by strong surface tension forces during the laser transfer process and clean, straight side walls of the cut made by helium ion milling, the magnetic resonance is observed at 600 nm in gold and at 565 nm in silver nanoparticles. Structuring arbitrary features on the surface of nanoscale spherical resonators provides new ways for engineering hybrid resonant modes and ultra-high near-field enhancement.

physics.optics↗