arXiv subjects

W. Andreas Schroeder

Publications and source records attributed to W. Andreas Schroeder.

9 recordsLinked to original sources

arXiv2026

Evidence for Umklapp electron scattering emission from metal photocathodes

Comparison of the measured spectral emission properties of single-crystal Cu(001) and W(111) photocathodes to established photoemission theories reveal evidence for an additional one photon emission process predominantly affecting electron emission near and below the photoemission threshold. This additional photoemission process is postulated to be due to a momentum-resonant Franck-Condon mechanism mediated by inelastic Umklapp electron scattering. An initial first-principles simulation of this emission process (involving the electron thermal effective mass, the inelastic electron mean free path at the vacuum level, and the number of Fermi surfaces in the metal), when combined with a direct one-step band emission model, is consistent with the measured spectral dependencies of both the quantum efficiency and mean transverse energy of electron photoemission from the two single-crystal metal photocathodes.

cond-mat.mtrl-sci↗

arXiv2026

Intrinsic emittance properties of an Fe-doped Beta-Ga2O3(010) photocathode: Ultracold electron emission at 300K and the polaron self-energy

Measurements of the spectral emission properties of an iron-doped a beta-Ga2O3(010) photocathode at 300 K reveal the presence of an ultracold contribution to the total electron beam emission with a 6 meV mean transverse energy (MTE) in the 3.5-4.4 eV photon energy range (282-354 nm). This extreme sub-thermal photoemission signal is consistent with direct emission of electrons photoexcited from the Fe dopant states into the low effective mass and positive electron affinity primary conduction band, and it is superimposed on a stronger signal with a larger MTE associated with an (optical)phonon-mediated momentum resonant Franck-Condon (FC) emission process from a thermally populated and negative electron affinity upper conduction band. For photon energies above 4.5 eV, a transition from a long to a short transport regime is forced by an absorption depth reduction to below 100 nm and both MTE signals exhibit spectral trends consistent with phonon-mediated FC emission if the polaron formation self-energy is included in the temperature of the initial thermalized photoexcited electron distribution.

cond-mat.mtrl-sci↗

arXiv2025

Emission Properties of a Hybrid Metallized Diamond(001) Photocathode

The spectral emission characteristics of a proof-of-concept hybrid metallized diamond(001) photocathode are presented. The quantum efficiency (QE) is shown to be determined by the photo-injection efficiency across the ohmic contact at the back metallized face, whereas the mean transverse energy (MTE) of the photoemitted electrons is consistent with a (optical)phonon-assisted and momentum-resonant Franck-Condon mechanism [Phys. Rev. Applied 23, 054065 (2025)] following electron drift transport to the untreated diamond(001) front emission face. Emission is observed from both the lower and upper conduction bands of diamond with positive and negative electron affinity respectively. A potential route to the realization of a red-visible photocathode based on this concept with a sub-50meV MTE and a QE greater than 0.1% is discussed.

physics.acc-ph↗

arXiv2025

Franck-Condon electron emission from polar semiconductor photocathodes

A presented analytical formulation of (optical)phonon-mediated and momentum-resonant Franck-Condon emission of photoexcited electrons from polar semiconductors is shown to be very consistent with (i) the observed emission properties of a Cesiated GaAs(001) photocathode at 808nm [J. Phys. D: Appl. Phys. 54, 205301 (2021)] and (ii) the measured spectral emission properties of a GaN(0001) photocathode from just below its bandgap energy to 5eV. The theoretical analysis in the parabolic band approximation predicts the form of both the quantum efficiency and mean transverse energy of photoemission as a function of the photocathode's electron affinity and the electron temperature in the vicinity of its emission face. The good agreement between theory and experimental data also suggests that sub-10nm rms surface roughness effects are not significant for polar semiconductor photocathodes.

cond-mat.mtrl-sci↗

arXiv2022

Spectral Emission Properties of a Nitrogen-doped Diamond(001) Photocathode: Hot Electron Transport and Transverse Momentum Filtering

The electron emission properties of a single-crystal nitrogen-doped diamond(001) photocathode inserted in a 10kV DC photoelectron gun are determined using a tunable (235-410nm) ultraviolet laser radiation source for photoemission from both the back nitrogen-doped substrate face and the front homo-epitaxially grown and undoped diamond crystal face. The measured spectral trends of the mean transverse energy (MTE) and quantum efficiency (QE) of the emitted electrons are both anomalous and non-monotonic, but are shown to be consistent with (i) the known physics of electron photoexcitation from the nitrogen substitution states into the conduction bands of diamond, (ii) the energy position and dispersion characteristics of the conduction bands of diamond in the (001) emission direction, (iii) the effective electron affinity of the crystal faces, (iv) the strong electron-(optical)phonon coupling in diamond, and (v) the associated hot electron transport dynamics under energy equipartition with the optical phonons. Notably, the observed hot electron emission is shown to be restricted parallel to the photocathode surface by the low transverse effective masses of the emitting band states - a transverse momentum filtering effect.

cond-mat.mtrl-sci↗

arXiv2020

Ultracold electrons via Near-Threshold Photoemission from Single-Crystal Cu(100)

Achieving a low mean transverse energy or temperature of electrons emitted from the photocathode-based electron sources is critical to the development of next-generation and compact X-ray Free Electron Lasers and Ultrafast Electron Diffraction, Spectroscopy and Microscopy experiments. In this paper, we demonstrate a record low mean transverse energy of 5 meV from the cryo-cooled (100) surface of copper using near-threshold photoemission. Further, we also show that the electron energy spread obtained from such a surface is less than 11.5 meV, making it the smallest energy spread electron source known to date: more than an order of magnitude smaller than any existing photoemission, field emission or thermionic emission based electron source. Our measurements also shed light on the physics of electron emission and show how the energy spread at few meV scale energies is limited by both the temperature and the vacuum density of states.

physics.acc-ph↗

arXiv2018

Mean Transverse Energy of Ultrananocrystalline Diamond Photocathode

Nitrogen incorporated ultrananocrystalline diamond ((N)UNCD) could be an enabling material platform for photocathode applications due to its high emissivity. While the quantum efficiency (QE) of UNCD was reported by many groups, no experimental measurements of the intrinsic emittance/mean transverse energy (MTE) have been reported. Here, MTE measurement results for an (N)UNCD photocathode in the photon energy range of 4.41 to 5.26 eV are described. The MTE demonstrates no noticeable dependence on the photon energy, with an average value of 266 meV. This spectral behavior is shown to not to be dependent upon physical or chemical surface roughness and inconsistent with low electron effective mass emission from graphitic grain boundaries, but may be associated with emission from spatially-confined states in the graphite regions between the diamond grains. The combined effect of fast-growing QE and constant MTE with respect to the excess laser energy may pave the way to bright UNCD photocathodes.

cond-mat.mtrl-sci↗

arXiv2017

Nonparametric Modeling of Face-Centered Cubic Metal Photocathodes

Face-centered cubic (FCC) is an important crystal structure, and there are ten elemental FCC metals (Al, Ag, Au, Ca, Cu, Pb, Pd, Pt, Rh, and Sr) that have this structure. Three of them could be used as photocathodes (Au, Rh, Pt, and Pd have very high work functions; Ca and Sr are very reactive). Au has high work function, but it is included for the sake of the completeness of noble metals' photoemission investigation. In this paper, we will apply the nonparametric photoemission model to investigate these four remaining FCC photocathodes; two noble metals (Cu and Au), two p-block metals (Al and Pb). Apart from the fact that the direct photoemission is dominant for most FCC photocathodes, photoemission from a surface state has also been observed for the (111)-face of noble metals. The optical properties of the (111) surface state will be extensively reviewed both experimentally and theoretically, and a surface state DFT evaluation will be performed to show that the photocathode generated hollow cone illumination (HCI) can be realized.

physics.acc-ph↗

arXiv2017

PbTe(111) Sub-Thermionic Photocathode: A Route to High-Quality Electron Pulses

The emission properties of PbTe(111) single crystal have been extensively investigated to demonstrate that PbTe(111) is a promising low root mean square transverse momentum (Δp$_T$) and high brightness photocathode. The density functional theory (DFT) based photoemission analysis successfully elucidates that the 'hole-like' Λ$^+_6$ energy band in the $L$ valley with low effective mass $m^*$ results in low Δp$_T$. Especially, as a 300K solid planar photocathode, Te-terminated PbTe(111) single crystal is expected to be a potential 50K electron source.

physics.acc-ph↗