SearcharxivSearch

arXiv subjects

W. Dai

Publications and source records attributed to W. Dai.

11 recordsLinked to original sources

Revisiting identified-particle $p_{\mathrm{T}}$ spectra using the Boltzmann-Gibbs blast-wave model in a Bayesian inference framework

We perform a Bayesian analysis of transverse momentum ($p_{\mathrm{T}}$) spectra of identified particles, i.e., pions, kaons, and protons, at midrapidity in Au+Au collisions and Pb+Pb collisions using the Boltzmann-Gibbs blast-wave (BGBW) model. We investigate whether it is possible to simultaneously describe the $p_{\mathrm{T}}$ spectra of identified particles without imposing the particle species-dependent $p_{\mathrm{T}}$ fit ranges -- a practice that was followed in conventional blast-wave model studies to achieve reasonable simultaneous fits. Using Bayesian analysis, our results indicate that a simultaneous description of the $p_{\mathrm{T}}$ spectra of pions, kaons, and protons is feasible without imposing the particle species-dependent $p_{\mathrm{T}}$ fit ranges, for Au+Au collisions up to the available data ($\sim$2 GeV/c) and for Pb+Pb collisions up to 3 GeV/c. The extracted parameters remain broadly consistent with those obtained from conventional BGBW simultaneous fits, while the extension of the fit range leads to moderate changes in some parameters. Furthermore, Bayesian analysis yields well-constrained posterior distributions for the kinetic freeze-out temperature $T_{kin}$, the average transverse flow velocity $\langle \beta_{\mathrm{T}}\rangle$, and the exponent of the velocity profile $n$ and shows their correlations transparently. We suggest that the BGBW model in a Bayesian inference framework proposed can be applied in future data analyses to simultaneously describe the $p_{\mathrm{T}}$ spectra of identified particles and extract the relevant information about the collision system.

nucl-th

Measurement of cosmic-ray muon flux at CJPL-II

In China Jinping Underground Laboratory (CJPL), the deepest and largest underground laboratory globally, the cosmic-ray muon flux is significantly reduced due to the substantial shielding provided by the overlying mountain. From 2016 to 2020, we measured the muon flux in the second phase of CJPL (CJPL-II) with a plastic scintillator muon telescope system, detecting 161 muon events over an effective live time of 1098 days. The detection efficiency was obtained by simulating the underground muon energy and angular distributions and the telescope system's response to underground muons. The cosmic-ray muon flux is determined to be (3.03 $\pm$ 0.24 (stat) $\pm$ 0.18 (sys)) $\times$ 10$^{-10}$ cm$^{-2}$s$^{-1}$, which is the lowest among underground laboratories worldwide.

astro-ph.HE

Pulse shape simulation for the reduced charge collection layer in p-type high-purity germanium detectors

$P$-type high-purity germanium (HPGe) detectors are widely used across many scientific domains, and current data analysis methods have served well in many use cases. However, applications like low-background experiments that search for rare physics, such as dark matter, neutrinoless double-beta decay, and coherent elastic neutrino-nucleus scattering, could profit a lot from a more detailed understanding of the detector response close to the surface. The outer $n^+$ electrode of the $p$-type HPGe detector forms a layer with reduced charge collection, and events originating here can be a critical background source in such experiments. If the difference in detector pulse shape between detector surface and bulk events is known, it can be used to identify and veto these background events. However, a faithful simulation of the detector response in this surface region is difficult and has not been available as a standard method so far. We present a novel three-dimensional pulse shape simulation method for this reduced charge collection (RCC) layer. We have implemented this method as a new feature in the open-source simulation package \emph{SolidStateDetectors$.$jl} and show a validation of the numerical simulation results with analytical calculations. An experimental study using a $p$-type HPGe detector also validates our approach. The current implementation supports $p$-type HPGe detectors of fairly arbitrary geometry, but is easily adaptable to $n$-type detectors by adjusting the impurity density profile of the layer. It should also be adaptable to other semiconductor materials in a straightforward fashion.

physics.ins-det

Characterization of drive-induced unwanted state transitions in superconducting circuits

Microwave drives are essential for implementing control and readout operations in superconducting quantum circuits. However, increasing the drive strength eventually leads to unwanted state transitions which limit the speed and fidelity of such operations. In this work, we systematically investigate such transitions in a fixed-frequency qubit subjected to microwave drives spanning a 9 GHz frequency range. We identify the physical origins of these transitions and classify them into three categories. (1) Resonant energy exchange with parasitic two-level systems, activated by drive-induced ac-Stark shifts, (2) multi-photon transitions to non-computational states, intrinsic to the circuit Hamiltonian, and (3) inelastic scattering processes in which the drive causes a state transition in the superconducting circuit, while transferring excess energy to a spurious electromagnetic mode or two-level system (TLS) material defect. We show that the Floquet steady-state simulation, complemented by an electromagnetic simulation of the physical device, accurately predicts the observed transitions that do not involve TLS. Our results provide a comprehensive classification of these transitions and offer mitigation strategies through informed choices of drive frequency as well as improved circuit design.

quant-ph

Lumped-element broadband SNAIL parametric amplifier with on-chip pump filter for multiplexed readout

We present a SNAIL-based parametric amplifier that integrates a lumped-element impedance matching network for increased bandwidth and an on-chip pump-port filter for efficient pump delivery. The amplifier is fabricated using a single-layer optical lithography step, followed by a single-layer electron beam lithography step. We measure a flat 20 dB gain profile with less than 1 dB ripple across a bandwidth of up to 250 MHz on multiple devices, demonstrating robust performance against variations arising from fabrication and packaging. We characterize the amplifier's linearity by analyzing gain compression and intermodulation distortion under simultaneous multi-tone excitation. We show that the intermodulation products remain suppressed by more than 23 dB relative to the signal tones, even at the 1 dB gain compression point. We further validate its utility by performing simultaneous high-fidelity readout of two transmon qubits, achieving state assignment fidelities of 99.51% and 98.55%. The combination of compact design, fabrication simplicity, and performance robustness makes this amplifier a practical device for quantum experiments with superconducting circuits.

quant-ph

DashChat: Interactive Authoring of Performance Dashboard Design Prototypes through Conversation with LLM-Powered Agent

Performance dashboards are dashboards designed for and deployed within industrial settings (e.g., enterprises, government agencies) to showcase and monitor their operational performance. They have evolved into an important and well-commercialized format for data visualization. In practice, the ideation and negotiation phases demand rapid prototyping and iteration to align with evolving client needs. However, existing tools compel designers to compromise either on iteration speed or on the meticulous handling of visual complexities. To address these gaps, we introduce DashChat for generating performance dashboard prototypes. Collaborating with industry experts, we derived the design requirements and analyzed 114 dashboards to extract common design patterns. Informed by the findings, our solution integrates a chat interface with an LLM-driven multi-agent pipeline, translating textual requirements into prototypes. We evaluated the system by comparing it with a baseline, demonstrating its effectiveness in facilitating the prototyping process while ensuring design quality.

cs.HC

Benchmarking the readout of a superconducting qubit for repeated measurements

Readout of superconducting qubits faces a trade-off between measurement speed and unwanted back-action on the qubit caused by the readout drive, such as $T_1$ degradation and leakage out of the computational subspace. The readout is typically benchmarked by integrating the readout signal and choosing a binary threshold to extract the "readout fidelity". We show that readout fidelity may significantly overlook readout-induced leakage errors. Such errors are detrimental for applications that rely on continuously repeated measurements, e.g., quantum error correction. We introduce a method to measure the readout-induced leakage rate by repeatedly executing a composite operation - a readout preceded by a randomized qubit-flip. We apply this technique to characterize the readout of a superconducting qubit, optimized for fidelity across four different readout durations. Our technique highlights the importance of an independent leakage characterization by showing that the leakage rates vary from $0.12\%$ to $7.76\%$ across these readouts even though the fidelity exceeds $99.5\%$ in all four cases.

quant-ph

Hamiltonian Extrema of an Arbitrary Flux-Biased Josephson Circuit

Flux-biased loops including one or more Josephson junctions are ubiquitous elements in quantum information experiments based on superconducting circuits. These quantum circuits can be tuned to implement a variety of Hamiltonians, with applications ranging from decoherence-protected qubits to quantum limited converters and amplifiers. The extrema of the Hamiltonian of these circuits are of special interest because they govern their low-energy dynamics. However, the theory of superconducting quantum circuits so far lacks a systematic method to find these extrema and compute the series expansion of the Hamiltonian in their vicinity for an arbitrary nonlinear superconducting circuit. We present such a method, which can aid the synthesis of new functionalities in quantum devices.

cond-mat.supr-con

Frequency-tunable Kerr-free three-wave mixing with a gradiometric SNAIL

Three-wave mixing is a key process in superconducting quantum information processing, being involved in quantum-limited amplification and parametric coupling between superconducting cavities. These operations can be implemented by SNAIL-based devices that present a Kerr-free flux-bias point where unwanted parasitic effects such as Stark shift are suppressed. However, with a single flux-bias parameter, these circuits can only host one Kerr-free point, limiting the range of their applications. In this Letter, we demonstrate how to overcome this constraint with a gradiometric SNAIL, a doubly-flux biased superconducting circuit for which both effective inductance and Kerr coefficient can be independently tuned. Experimental data show the capability of the gradiometric SNAIL to suppress Kerr effect in a three-wave mixing parametric amplifier over a continuum of flux bias points corresponding to a 1.7 GHz range of operating frequencies.

cond-mat.supr-con

Distributed Data-Processing Pipeline for Mingantu Ultrawide Spectral Radioheliograph

The Chinese Spectral RadioHeliograph (CSRH) is a synthetic aperture radio interferometer built in Inner Mongolia, China. As a solar-dedicated interferometric array, CSRH is capable of producing high quality radio images at frequency range from 400 MHz to 15 GHz with high temporal, spatial, and spectral resolution.To implement high cadence imaging at wide-band and obtain more than 2 order higher multiple frequencies, the implementation of the data processing system for CSRH is a great challenge. It is urgent to build a pipeline for processing massive data of CSRH generated every day. In this paper, we develop a high performance distributed data processing pipeline (DDPP) built on the OpenCluster infrastructure for processing CSRH observational data including data storage, archiving, preprocessing, image reconstruction, deconvolution, and real-time monitoring. We comprehensively elaborate the system architecture of the pipeline and the implementation of each subsystem. The DDPP is automatic, robust, scalable and manageable. The processing performance under multi computers parallel and GPU hybrid system meets the requirements of CSRH data processing. The study presents an valuable reference for other radio telescopes especially aperture synthesis telescopes, and also gives an valuable contribution to the current and/or future data intensive astronomical observations.

astro-ph.IM

Achieving Super-Resolution in Multi-Rate Sampling Systems via Efficient Semidefinite Programming

Super-resolution theory aims to estimate the discrete components lying in a continuous space that constitute a sparse signal with optimal precision. This work investigates the potential of recent super-resolution techniques for spectral estimation in multi-rate sampling systems. It shows that, under the existence of a common supporting grid, and under a minimal separation constraint, the frequencies of a spectrally sparse signal can be exactly jointly recovered from the output of a semidefinite program (SDP). The algorithmic complexity of this approach is discussed, and an equivalent SDP of minimal dimension is derived by extending the Gram parametrization properties of sparse trigonometric polynomials.

cs.IT