arXiv subjects

W. Del Pozzo

Publications and source records attributed to W. Del Pozzo.

11 recordsLinked to original sources

arXiv2021

Population inference of spin-induced quadrupole moments as a probe for non-black hole compact binaries

Gravitational-wave (GW) measurements of physical effects such as spin-induced quadrupole moments can distinguish binaries consisting of black holes from non-black hole binaries. While these effects may be poorly constrained for single-event inferences with the second-generation detectors, combining information from multiple detections can help uncover features of non-black hole binaries. The spin-induced quadrupole moment has specific predictions for different types of compact objects, and a generalized formalism must consider a population where different types of compact objects co-exist. In this study, we introduce a hierarchical mixture-likelihood formalism to estimate the {\it fraction of non-binary black holes in the population}. We demonstrate the applicability of this method using simulated GW signals injected into Gaussian noise following the design sensitivities of the Advanced LIGO Advanced Virgo detectors. We compare the performance of this method with a traditionally-followed hierarchical inference approach. Both the methods are equally effective to hint at inhomogeneous populations, however, we find the mixture-likelihood approach to be more natural for mixture populations comprising compact objects of diverse classes. We also discuss the possible systematics in the mixture-likelihood approach, caused by several reasons, including the limited sensitivity of the second-generation detectors, specific features of the astrophysical population distributions, and the limitations posed by the waveform models employed. Finally, we apply this method to the LIGO-Virgo detections published in the second GW transient catalog (GWTC-2) and find them consistent with a binary black hole population within the statistical precision.

gr-qc↗

arXiv2020

Cosmic archaeology with massive stellar black hole binaries

The existence of massive stellar black hole binaries (MBHBs), with primary black hole (BH) masses $\ge 31 \, M_\odot$, was proven by the detection of the gravitational wave (GW) event GW150914 during the first LIGO/Virgo observing run (O1), and successively confirmed by seven additional GW signals discovered in the O1 and O2 data. By adopting the galaxy formation model \texttt{GAMESH} coupled with binary population synthesis (BPS) calculations, here we investigate the origin of these MBHBs by selecting simulated binaries compatible in mass and coalescence redshifts. We find that their cosmic birth rates peak in the redshift range $6.5 \leq z \leq 10$, regardless of the adopted BPS. These MBHBs are then old systems forming in low-metallicity ($Z \sim [0.01-0.1] \, Z_{\odot}$), low-stellar-mass galaxies, before the end of cosmic reionization, i.e. significantly beyond the peak of cosmic star formation. GW signals generated by coalescing MBHBs open up new possibilities to probe the nature of stellar populations in remote galaxies, at present too faint to be detected by available electromagnetic facilities.

astro-ph.GA↗

arXiv2019

Constraints on the binary black hole nature of GW151226 and GW170608 from the measurement of spin-induced quadrupole moments

According to the "no-hair" conjecture, a Kerr black hole (BH) is completely described by its mass and spin. In particular, the spin-induced quadrupole moment of a Kerr BH with mass $m$ and dimensionless spin $χ$ can be written as $Q=-κ\,m^3χ^2$, where $κ_{\rm BH}=1$. Thus by measuring the spin-induced quadrupole parameter $κ$, we can test the binary black hole nature of compact binaries and distinguish them from binaries comprised of other exotic compact objects, as proposed in [N. V. Krishnendu et al., PRL 119, 091101 (2017)]. Here, we present a Bayesian framework to carry out this test where we measure the symmetric combination of individual spin-induced quadrupole moment parameters fixing the anti-symmetric combination to be zero. The analysis is restricted to the inspiral part of the signal as the spin-induced deformations are not modeled in the post-inspiral regime. We perform detailed simulations to investigate the applicability of this method for compact binaries of different masses and spins and also explore various degeneracies in the parameter space which can affect this test. We then apply this method to the gravitational wave events, GW151226 and GW170608 detected during the first and second observing runs of Advanced LIGO and Advanced Virgo detectors. We find the two events to be consistent with binary black hole mergers in general relativity. By combining information from several more of such events in future, this method can be used to set constraints on the black hole nature of the population of compact binaries that are detected by the Advanced LIGO and Advanced Virgo detectors.

gr-qc↗

arXiv2018

Calibration of Advanced Virgo and Reconstruction of the Gravitational Wave Signal h(t) during the Observing Run O2

In August 2017, Advanced Virgo joined Advanced LIGO for the end of the O2 run, leading to the first gravitational waves detections with the three-detector network. This paper describes the Advanced Virgo calibration and the gravitational wave strain h(t) reconstruction during O2. The methods are the same as the ones developed for the initial Virgo detector and have already been described in previous publications, this paper summarizes the differences and emphasis is put on estimating systematic uncertainties. Three versions of the h(t) signal have been computed for the Virgo O2 run, an online version and two post-run reprocessed versions with improved detector calibration and reconstruction algorithm. A photon calibrator has been used to establish the sign of h(t) and to make an independent partial cross-check of the systematic uncertainties. The uncertainties reached for the latest h(t) version are 5.1% in amplitude, 40 mrad in phase and 20 microseconds in timing.

gr-qc↗

arXiv2014

Advanced Virgo: a 2nd generation interferometric gravitational wave detector

Advanced Virgo is the project to upgrade the Virgo interferometric detector of gravitational waves, with the aim of increasing the number of observable galaxies (and thus the detection rate) by three orders of magnitude. The project is now in an advanced construction phase and the assembly and integration will be completed by the end of 2015. Advanced Virgo will be part of a network with the two Advanced LIGO detectors in the US and GEO HF in Germany, with the goal of contributing to the early detections of gravitational waves and to opening a new observation window on the universe. In this paper we describe the main features of the Advanced Virgo detector and outline the status of the construction.

gr-qc↗

arXiv2014

Reconstruction of the gravitational wave signal $h(t)$ during the Virgo science runs and independent validation with a photon calibrator

The Virgo detector is a kilometer-scale interferometer for gravitational wave detection located near Pisa (Italy). About 13 months of data were accumulated during four science runs (VSR1, VSR2, VSR3 and VSR4) between May 2007 and September 2011, with increasing sensitivity. In this paper, the method used to reconstruct, in the range 10 Hz-10 kHz, the gravitational wave strain time series $h(t)$ from the detector signals is described. The standard consistency checks of the reconstruction are discussed and used to estimate the systematic uncertainties of the $h(t)$ signal as a function of frequency. Finally, an independent setup, the photon calibrator, is described and used to validate the reconstructed $h(t)$ signal and the associated uncertainties. The uncertainties of the $h(t)$ time series are estimated to be 8% in amplitude. The uncertainty of the phase of $h(t)$ is 50 mrad at 10 Hz with a frequency dependence following a delay of 8 $μ$s at high frequency. A bias lower than $4\,\mathrm{μs}$ and depending on the sky direction of the GW is also present.

gr-qc↗

arXiv2013

Measuring the redshift of standard sirens using the neutron star deformability

A recent study has shown that redshift information can be directly extracted from gravitational wave sources. This can be done by exploiting the tidal phasing contributions to the waveform during the inspiral phase of binary neutron stars coalescences. The original study investigated the viability of this idea in the context of the Einstein Telescope using a Fisher Matrix approach and in this paper, we further explore this idea using realistic simulations and Bayesian inference techniques. We find that the fractional accuracy with which the redshift can be measured is in the order of tens of percent, in agreement with Fisher Matrix predictions. Moreover, no significant bias is found. We conclude that, when tidal phasing contributions are included in the analysis, inference of the cosmological parameters from gravitational waves is possible

gr-qc↗

arXiv2012

Towards a generic test of the strong field dynamics of general relativity using compact binary coalescence: Further investigations

In this paper we elaborate on earlier work by the same authors in which a novel Bayesian inference framework for testing the strong-field dynamics of General Relativity using coalescing compact binaries was proposed. Unlike methods that were used previously, our technique addresses the question whether one or more 'testing coefficients' (e.g. in the phase) parameterizing deviations from GR are non-zero, rather than all of them differing from zero at the same time. The framework is well-adapted to a scenario where most sources have low signal-to-noise ratio, and information from multiple sources as seen in multiple detectors can readily be combined. In our previous work, we conjectured that this framework can detect generic deviations from GR that can in principle not be accomodated by our model waveforms, on condition that the change in phase near frequencies where the detectors are the most sensitive is comparable to that induced by simple shifts in the lower-order phase coefficients of more than a few percent ($\sim 5$ radians at 150 Hz). To further support this claim, we perform additional numerical experiments in Gaussian and stationary noise according to the expected Advanced LIGO/Virgo noise curves, and coherently injecting signals into the network whose phasing differs structurally from the predictions of GR, but with the magnitude of the deviation still being small. We find that even then, a violation of GR can be established with good confidence.

gr-qc↗

arXiv2012

Towards a generic test of the strong field dynamics of general relativity using compact binary coalescence

Coalescences of binary neutron stars and/or black holes are amongst the most likely gravitational-wave signals to be observed in ground based interferometric detectors. Apart from the astrophysical importance of their detection, they will also provide us with our very first empirical access to the genuinely strong-field dynamics of General Relativity (GR). We present a new framework based on Bayesian model selection aimed at detecting deviations from GR, subject to the constraints of the Advanced Virgo and LIGO detectors. The method tests the consistency of coefficients appearing in the waveform with the predictions made by GR, without relying on any specific alternative theory of gravity. The framework is suitable for low signal-to-noise ratio events through the construction of multiple subtests, most of which involve only a limited number of coefficients. It also naturally allows for the combination of information from multiple sources to increase one's confidence in GR or a violation thereof. We expect it to be capable of finding a wide range of possible deviations from GR, including ones which in principle cannot be accommodated by the model waveforms, on condition that the induced change in phase at frequencies where the detectors are the most sensitive is comparable to the effect of a few percent change in one or more of the low-order post-Newtonian phase coefficients. In principle the framework can be used with any GR waveform approximant, with arbitrary parameterized deformations, to serve as model waveforms. In order to illustrate the workings of the method, we perform a range of numerical experiments in which simulated gravitational waves modeled in the restricted post-Newtonian, stationary phase approximation are added to Gaussian and stationary noise that follows the expected Advanced LIGO/Virgo noise curves.

gr-qc↗

arXiv2011

Characterization of the Virgo Seismic Environment

The Virgo gravitational wave detector is an interferometer (ITF) with 3km arms located in Pisa, Italy. From July to October 2010, Virgo performed its third science run (VSR3) in coincidence with the LIGO detectors. Despite several techniques adopted to isolate the interferometer from the environment, seismic noise remains an important issue for Virgo. Vibrations produced by the detector infrastructure (such as air conditioning units, water chillers/heaters, pumps) are found to affect Virgo's sensitivity, with the main coupling mechanisms being through beam jitter and scattered light processes. The Advanced Virgo (AdV) design seeks to reduce ITF couplings to environmental noise by having most vibration-sensitive components suspended and in-vacuum, as well as muffle and relocate loud machines. During the months of June and July 2010, a Guralp-3TD seismometer was stationed at various locations around the Virgo site hosting major infrastructure machines. Seismic data were examined using spectral and coherence analysis with seismic probes close to the detector. The primary aim of this study was to identify noisy machines which seismically affect the ITF environment and thus require mitigation attention. Analyzed machines are located at various distances from the experimental halls, ranging from 10m to 100m. An attempt is made to measure the attenuation of emitted noise at the ITF and correlate it to the distance from the source and to seismic attenuation models in soil.

gr-qc↗

arXiv2009

Triple Michelson Interferometer for a Third-Generation Gravitational Wave Detector

The upcoming European design study `Einstein gravitational-wave Telescope' represents the first step towards a substantial, international effort for the design of a third-generation interferometric gravitational wave detector. It is generally believed that third-generation instruments might not be installed into existing infrastructures but will provoke a new search for optimal detector sites. Consequently, the detector design could be subject to fewer constraints than the on-going design of the second generation instruments. In particular, it will be prudent to investigate alternatives to the traditional L-shaped Michelson interferometer. In this article, we review an old proposal to use three Michelson interferometers in a triangular configuration. We use this example of a triple Michelson interferometer to clarify the terminology and will put this idea into the context of more recent research on interferometer technologies. Furthermore the benefits of a triangular detector will be used to motivate this design as a good starting point for a more detailed research effort towards a third-generation gravitational wave detector.

gr-qc↗