SearcharxivSearch

arXiv subjects

W. Fischer

Publications and source records attributed to W. Fischer.

18 recordsLinked to original sources

Future Circular Lepton Collider FCC-ee: Overview and Status

The worldwide High Energy Physics community widely agrees that the next collider should be a Higgs factory. Acknowledging this priority, in 2021 CERN has launched the international Future Circular Collider (FCC) Feasibility Study (FS). The FCC Integrated Project foresees, in a first stage, a high-luminosity high-energy electron-positron collider, serving as Higgs, top and electroweak factory, and, in a second stage, an energy frontier hadron collider, with a centre-of-mass energy of at least 100 TeV. In this paper, we address a few key elements of the FCC-ee accelerator design, its performance reach, and underlying technologies, as requested by the Snowmass process. The Conceptual Design Report for the FCC, published in 2019, serves as our primary reference. We also summarize a few recent changes and improvements.

physics.acc-ph

HOPS 108: Star-formation triggered by a non-thermal jet?

The nature of the far-IR source HOPS 108 has been a matter of debate in the last years. Previous radio observations detected a 3.6 cm source (VLA 12), coincident with HOPS 108, that was interpreted as a radio jet from this protostar. We present new multi-wavelength (0.7-5 cm), multi-configuration VLA observations as well as archive data (3.6 cm) that reveal VLA 12 as three knots of non-thermal emission, with HOPS 108 close to the central knot. We show that these knots have not been ejected by HOPS 108. We propose that the VLA 12 knots are actually part of a radio jet driven by VLA 11 (HOPS 370), a strong nearby source clearly elongated in the direction of the knots. The position of HOPS 108 in the path of the VLA 11-VLA 12 jet suggests an appealing new scenario: the triggered formation of HOPS 108 by the interaction of the jet with the surrounding medium.

astro-ph.GA

High energy Coulomb-scattered electrons for relativistic particle beam diagnostics

A new system used for monitoring energetic Coulomb-scattered electrons as the main diagnostic for accurately aligning the electron and ion beams in the new Relativistic Heavy Ion Collider (RHIC) electron lenses is described in detail. The theory of electron scattering from relativistic ions is developed and applied to the design and implementation of the system used to achieve and maintain the alignment. Commissioning with gold and 3He beams is then described as well as the successful utilization of the new system during the 2015 RHIC polarized proton run. Systematic errors of the new method are then estimated. Finally, some possible future applications of Coulomb-scattered electrons for beam diagnostics are briefly discussed.

physics.acc-ph

A Storage Ring Experiment to Detect a Proton Electric Dipole Moment

A new experiment is described to detect a permanent electric dipole moment of the proton with a sensitivity of $10^{-29}e\cdot$cm by using polarized "magic" momentum $0.7$~GeV/c protons in an all-electric storage ring. Systematic errors relevant to the experiment are discussed and techniques to address them are presented. The measurement is sensitive to new physics beyond the Standard Model at the scale of 3000~TeV.

physics.acc-ph

Beam-beam observations in the RHIC

The Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory has been in operation since 2000. Over the past decade, the luminosity in the polarized proton (p-p) operations has increased by more than one order of magnitude. The maximum total beam-beam tune shift with two collisions has reached 0.018. The beam-beam interaction leads to large tune spread, emittance growth, and short beam and luminosity lifetimes. In this article, we review the beam-beam observations during the previous RHIC p-p runs. The mechanism for particle loss is presented. The intra-beam scattering (IBS) contributions to emittance and bunch length growths are calculated and compared with the measurements. Finally, we will discuss current limits in the RHIC p-p operations and their solutions.

physics.acc-ph

Six-dimensional weak-strong simulations of head-on beam-beam compensation in RHIC

To compensate the large beam-beam tune spread and beam-beam resonance driving terms in the polarized proton operation in the Relativistic Heavy Ion Collider (RHIC), we will introduce a low-energy DC electron beam into each ring to collide head-on with the opposing proton beam. The device to provide the electron beam is called an electron lens. In this article, using a 6-D weak-strong-beam-beam interaction simulation model, we investigate the effects of head-on beam-beam compensation with electron lenses on the proton beam dynamics in the RHIC 250 GeV polarized proton operation. This article is abridged from the published article [1].

physics.acc-ph

Coherent beam-beam experiments and implications for head-on compensation

In polarized proton operation in the Relativistic Heavy Ion Collider (RHIC) coherent beam-beam modes are routinely observed with beam transfer function measurements. These modes can become unstable under external excitation or in the presence of impedance. This becomes even more relevant in the presence of head-on compensation, which reduces the beam-beam tune spread and hence Landau damping. We report on experiments and simulations carried out to understand the impact of coherent modes on operation with electron lenses.

physics.acc-ph

Long-range beam-beam experiments in the relativistic heavy ion collider

Long-range beam-beam effects are a potential limit to the LHC performance with the nominal design parameters, and certain upgrade scenarios under discussion. To mitigate long-range effects, current carrying wires parallel to the beam were proposed and space is reserved in the LHC for such wires. Two current carrying wires were installed in RHIC to study the effect of strong long-range beam-beam effects in a collider, as well as test the compensation of a single long-range interaction. The experimental data were used to benchmark simulations. We summarize this work.

physics.acc-ph

BTF measurements with beam-beam interactions

We present considerations about the transverse beam transfer function (BTF) of beams under the influence of two effects: The strong-strong beam-beam effect and the influence of a Gaussian electron lens. The BTF are investigated using two methods: BTF excitation is simulated in a particle-in-cell (PIC) code. The BTF model is verified using a known analytic expectation. Analytic expectations for BTF of beams under a stationary electron lens are derived by extending BTF from the formalism of Berg and Ruggiero. Finally we compare the analytic BTF results for a stationary Gaussian lens to both the PIC simulation for split tune conditions and to PIC simulations for a beam influenced by an electron lens. We conclude that the formalism represents the electron lens well and can be applied to a limited extend to the beam-beam effect under split tune conditions. The analytic formalism allows us to recover the strength of an electron lens by means of fitting and can give clues regarding the strength of the beam-beam effect under split tune conditions.

physics.acc-ph

Status of head-on beam-beam compensation in RHIC

In polarized proton operation, the performance of the Relativistic Heavy Ion Collider (RHIC) is limited by the head-on beam-beam effect. To overcome this limitation, two electron lenses are under commissioning. We give an overview of head-on beam-beam compensation in general and in the specific design for RHIC, which is based on electron lenses. The status of installation and commissioning are presented along with plans for the future.

physics.acc-ph

Measurement of the total cross section of uranium-uranium collisions at $\sqrt{s_{NN}}=192.8$ GeV

Heavy ion cross sections totaling several hundred barns have been calculated previously for the Relativistic Heavy Ion Collider (RHIC) and the Large Hadron Collider (LHC). These total cross sections are more than an order of magnitude larger than the geometric ion-ion cross sections primarily due to Bound-Free Pair Production (BFPP) and Electro-Magnetic Dissociation (EMD). Apart from a general interest in verifying the calculations experimentally, an accurate prediction of the losses created in the heavy ion collisions is of practical interest for the LHC, where some collision products are lost in cryogenically cooled magnets and have the potential to quench these magnets. In the 2012 RHIC run uranium ions collided with each other at $\sqrt{s_{NN}} = 192.8$ GeV with nearly all beam losses due to collisions. This allows for the measurement of the total cross section, which agrees with the calculated cross section within the experimental error.

nucl-ex

Recent RHIC in-situ coating technology developments

To rectify the problems of electron clouds observed in RHIC and unacceptable ohmic heating for superconducting magnets that can limit future machine upgrades, we started developing a robotic plasma deposition technique for $in-situ$ coating of the RHIC 316LN stainless steel cold bore tubes based on staged magnetrons mounted on a mobile mole for deposition of Cu followed by amorphous carbon (a-C) coating. The Cu coating reduces wall resistivity, while a-C has low SEY that suppresses electron cloud formation. Recent RF resistivity computations indicate that 10 μm of Cu coating thickness is needed. But, Cu coatings thicker than 2 μm can have grain structures that might have lower SEY like gold black. A 15-cm Cu cathode magnetron was designed and fabricated, after which, 30 cm long samples of RHIC cold bore tubes were coated with various OFHC copper thicknesses; room temperature RF resistivity measured. Rectangular stainless steel and SS discs were Cu coated. SEY of rectangular samples were measured at room; and, SEY of a disc sample was measured at cryogenic temperatures.

physics.acc-ph

Time evolution of the luminosity of colliding heavy-ion beams in BNL Relativistic Heavy Ion Collider and CERN Large Hadron Collider

We have studied the time evolution of the heavy ion luminosity and bunch intensities in the Relativistic Heavy Ion Collider (RHIC), at BNL, and in the Large Hadron Collider (LHC), at CERN. First, we present measurements from a large number of RHIC stores (from Run 7), colliding 100 GeV/nucleon Au beams without stochastic cooling. These are compared with two different calculation methods. The first is a simulation based on multi-particle tracking taking into account collisions, intrabeam scattering, radiation damping, and synchrotron and betatron motion. In the second, faster, method, a system of ordinary differential equations with terms describing the corresponding effects on emittances and bunch populations is solved numerically. Results of the tracking method agree very well with the RHIC data. With the faster method, significant discrepancies are found since the losses of particles diffusing out of the RF bucket due to intrabeam scattering are not modeled accurately enough. Finally, we use both methods to make predictions of the time evolution of the future Pb beams in the LHC at injection and collision energy. For this machine, the two methods agree well.

physics.acc-ph

RHIC Low-Energy Challenges and Plans

There is significant interest in RHIC heavy ion collisions at $\sqrt{s_{NN}}=$5--50 GeV, motivated by a search for the QCD phase transition critical point. The lowest energies for this search are well below the nominal RHIC gold injection collision energy of $\sqrt{s_{NN}}=19.6$ GeV. There are several operations challenges at RHIC in this regime, including longitudinal acceptance, magnet field quality, lattice control, and luminosity monitoring. We report on the status of work to address these challenges, including results from beam tests of low energy RHIC operations with protons and gold, and potential improvements from different beam cooling scenarios.

physics.acc-ph

First observations of beam losses due to bound-free pair production in a heavy-ion collider

We report the first observations of beam losses due to bound-free pair production at the interaction point of a heavy-ion collider. This process is expected to be a major luminosity limit for the Large Hadron Collider (LHC) when it operates with 208Pb82+ ions because the localized energy deposition by the lost ions may quench superconducting magnet coils. Measurements were performed at the Relativistic Heavy Ion Collider (RHIC) during operation with 100 GeV/nucleon 63Cu29+ ions. At RHIC, the rate, energy and magnetic field are low enough so that magnet quenching is not an issue. The hadronic showers produced when the single-electron ions struck the RHIC beampipe were observed using an array of photodiodes. The measurement confirms the order of magnitude of the theoretical cross section previously calculated by others.

physics.acc-ph

Considerations for an Ac Dipole for the LHC

Following successful experience at the BNL AGS, FNAL Tevatron, and CERN SPS, an AC Dipole will be adopted at the LHC for rapid measurements of ring optics. This paper describes some of the parameters of the AC dipole for the LHC, scaling from performance of the FNAL and BNL devices.

physics.acc-ph

He I 10830 as a Probe of Winds in Accreting Young Stars

He I 10830 profiles acquired with Keck's NIRSPEC for 6 young low mass stars with high disk accretion rates (AS 353A, DG Tau, DL Tau, DR Tau, HL Tau and SVS 13) provide new insight into accretion-driven winds. In 4 stars the profiles have the signature of resonance scattering, and possess a deep and broad blueshifted absorption that penetrates more than 50% into the 1 micron continuum over a continuous range of velocities from near the stellar rest velocity to the terminal velocity of the wind, unlike inner wind signatures seen in other spectral features. This deep and broad absorption provides the first observational tracer of the acceleration region of the inner wind and suggests that this acceleration region is situated such that it occults a significant portion of the stellar disk. The remaining 2 stars also have blue absorption extending below the continuum although here the profiles are dominated by emission, requiring an additional source of helium excitation beyond resonant scattering. This is likely the same process that produces the emission profiles seen at He I 5876.

astro-ph

The functional-analytic versus the functional-integral approach to quantum Hamiltonians: The one-dimensional hydrogen atom.

The capabilities of the functional-analytic and of the functional-integral approach for the construction of the Hamiltonian as a self-adjoint operator on Hilbert space are compared in the context of non-relativistic quantum mechanics. Differences are worked out by taking the one-dimensional hydrogen atom as an example, that is, a point mass on the Euclidean line subjected to the inverse-distance potential. This particular choice is made with the intent to clarify a long-lasting discussion about its spectral properties. In fact, for the four-parameter family of possible Hamiltonians the corresponding energy-dependent Green functions are derived in closed form. The multiplicity of Hamiltonians should be kept in mind when modelling certain experimental situations as, for instance, in quantum wires.

cond-mat