arXiv subjects

W. Franklin

Publications and source records attributed to W. Franklin.

8 recordsLinked to original sources

arXiv2026

Thermal Design and Experimental Validation of a Water-Cooled Bimetallic Minichannel Beam Dump for High-Power Heavy-Ion Accelerators

Efficient thermal management of beam-intercepting devices is essential for high-power heavy-ion accelerators,where intense and localized energy deposition can limit primary beam power and operational reliability. This work presents the thermal design and experimental validation of a water-cooled bimetallic minichannel beam dump developed for the Facility for Rare Isotope Beams (FRIB), a leading experimental nuclear physics facility. The design integrates three key thermal features: a tilted absorber geometry to reduce local heat flux, a CuCrZr/Al2219 bimetallic structure to enhance heat spreading while maintaining water-side compatibility, and 2-mm-wide minichannels to achieve high convective heat removal. A conjugate thermal model was developed to predict surface temperature, internal temperature gradients, bimetallic-interface temperature, coolant temperature rise, and thermal margin under representative beam-loading conditions. The prototype was validated in vacuum ($\approx$5$\times 10^{-4}$ torr) using a 17-keV electron beam. Surface temperatures were measured by infrared thermography, and internal temperatures were measured using embedded thermocouples. The calculated surface temperature distributions were generally consistent with the measurements within the experimental uncertainty of 4$\%$ in absolute temperature for central beam irradiation, while internal temperature measurements showed reasonable agreement within 15$\%$, mainly due to uncertainties in thermocouple placement and beam-position calibration. The validated model confirms that the minichannel beam dump can maintain absorber temperatures within the design limit under intermediate-power FRIB operating conditions. These results demonstrate the effectiveness of bimetallic minichannel cooling for compact, high-heat-flux beam dump systems in heavy-ion accelerator facilities.

physics.acc-ph↗

arXiv2026

Emissivity measurements of CuCrZr alloy

The FRIB heavy-ion accelerator, in user operation since 2022, produces rare isotope beams (RIBs) via interactions of high-intensity stable ion beams with a graphite production target. Approximately 20-40$\%$ of the primary beam power is deposited in the target, while the remaining 60-80$\%$ is absorbed by the beam dump. The minichannel beam dump (MCBD), currently operated at 20 kW and designed for operation up to 50 kW, uses CuCrZr alloy absorber plates. Thermal validation and thermal cycling tests of the MCBD were conducted at the Applied Research Laboratory (ARL) at Pennsylvania State University. Temperature measurements were obtained from an infrared (IR) camera. Since accurate temperature determination requires reliable emissivity values, the emissivity of CuCrZr was measured using the IR camera validated against thermocouple reference temperatures up to $\approx$ 650 $^{o}$C. The measurements were conducted under a vacuum level of $\approx$10$^{-5}$ torr to minimize emissivity variations due to surface oxidation. The emissivity of CuCrZr was determined to be 0.056 $\pm$ 0.009 using a constant fit to the measured data over the surface temperature range from 100-650 $^{o}$C.

physics.acc-ph↗

arXiv2025

Physical Thickness Characterization of the FRIB Production Targets

The FRIB heavy-ion accelerator, commissioned in 2022, is a leading facility for producing rare isotope beams (RIBs) and exploring nuclei beyond the limits of stability. These RIBs are produced via reactions between stable primary beams and a graphite target. Approximately 20-40 \% of the primary beam power is deposited in the target, requiring efficient thermal dissipation. Currently, FRIB operates with a primary beam power of up to 20 kW. To enhance thermal dissipation efficiency, a single-slice rotating graphite target with a diameter of approximately 30 cm is employed. The effective target region is a 1 cm-wide outer rim of the graphite disc. To achieve high RIB production rates, the areal thickness variation must be constrained within 2 \%. This paper presents physical thickness characterizations of FRIB production targets with various nominal thicknesses, measured using a custom-built non-contact thickness measurement apparatus.

physics.acc-ph↗

arXiv2017

Measurement of the Vector and Tensor Asymmetries at Large Missing Momentum in Quasielastic $(\vec{e}, e^{\prime}p)$ Electron Scattering from Deuterium

We report the measurement of the beam-vector and tensor asymmetries $A^V_{ed}$ and $A^T_d$ in quasielastic $(\vec{e}, e^{\prime}p)$ electrodisintegration of the deuteron at the MIT-Bates Linear Accelerator Center up to missing momentum of 500~MeV/c. Data were collected simultaneously over a momentum transfer range $0.1< Q^2<0.5$~(GeV/c)$^2$ with the Bates Large Acceptance Spectrometer Toroid using an internal deuterium gas target, polarized sequentially in both vector and tensor states. The data are compared with calculations. The beam-vector asymmetry $A^V_{ed}$ is found to be directly sensitive to the $D$-wave component of the deuteron and have a zero-crossing at a missing momentum of about 320~MeV/c, as predicted. The tensor asymmetry $A^T_d$ at large missing momentum is found to be dominated by the influence of the tensor force in the neutron-proton final-state interaction. The new data provide a strong constraint on theoretical models.

nucl-ex↗

arXiv2012

The Qweak Experiment: A Search for New Physics at the TeV Scale via a Measurement of the Proton's Weak Charge

We propose a new precision measurement of parity-violating electron scattering on the proton at very low Q^2 and forward angles to challenge predictions of the Standard Model and search for new physics. A unique opportunity exists to carry out the first precision measurement of the proton's weak charge, $Q_W =1 - 4\sin^2θ_W$. A 2200 hour measurement of the parity violating asymmetry in elastic ep scattering at Q^2=0.03 (GeV/c)^2 employing 180 $μ$A of 85% polarized beam on a 35 cm liquid Hydrogen target will determine the proton's weak charge with approximately 4% combined statistical and systematic errors. The Standard Model makes a firm prediction of $Q_W$, based on the running of the weak mixing angle from the Z0 pole down to low energies, corresponding to a 10 sigma effect in this experiment.

physics.ins-det↗

arXiv2010

The Role of Mesons in the Electromagnetic Form Factors of the Nucleon

The roles played by mesons in the electromagnetic form factors of the nucleon are explored using as a basis a model containing vector mesons with coupling to the continuum together with the asymptotic $Q^2$ behavior of perturbative QCD. Specifically, the vector dominance model (GKex) developed by Lomon is employed, as it is known to be very successful in representing the existing high-quality data published to date. An analysis is made of the experimental uncertainties present when the differences between the GKex model and the data are expanded in orthonormal basis functions. A main motivation for the present study is to provide insight into how the various ingredients in this model yield the measured behavior, including discussions of when dipole form factors are to be expected or not, of which mesons are the major contributors, for instance, at low-$Q^2$ or large distances, and of what effects are predicted from coupling to the continuum. Such insights are first discussed in momentum space, followed by an analysis of how different and potentially useful information emerges when both the experimental and theoretical electric form factors are Fourier transformed to coordinate space. While these Fourier transforms should not be interpreted as "charge distributions", nevertheless the roles played by the various mesons, especially which are dominant at large or small distance scales, can be explored via such experiment--theory comparisons.

nucl-th↗

arXiv2008

The Charge Form Factor of the Neutron at Low Momentum Transfer from the $^{2}\vec{\rm H}(\vec{\rm e},{\rm e}'{\rm n}){\rm p}$ Reaction

We report new measurements of the neutron charge form factor at low momentum transfer using quasielastic electrodisintegration of the deuteron. Longitudinally polarized electrons at an energy of 850 MeV were scattered from an isotopically pure, highly polarized deuterium gas target. The scattered electrons and coincident neutrons were measured by the Bates Large Acceptance Spectrometer Toroid (BLAST) detector. The neutron form factor ratio $G^{n}_{E}/G^{n}_{M}$ was extracted from the beam-target vector asymmetry $A_{ed}^{V}$ at four-momentum transfers $Q^{2}=0.14$, 0.20, 0.29 and 0.42 (GeV/c)$^{2}$.

nucl-ex↗

arXiv2006

Measurement of the proton electric to magnetic form factor ratio from \vec ^1H(\vec e, e'p)

We report the first precision measurement of the proton electric to magnetic form factor ratio from spin-dependent elastic scattering of longitudinally polarized electrons from a polarized hydrogen internal gas target. The measurement was performed at the MIT-Bates South Hall Ring over a range of four-momentum transfer squared $Q^2$ from 0.15 to 0.65 (GeV/c)$^2$. Significantly improved results on the proton electric and magnetic form factors are obtained in combination with previous cross-section data on elastic electron-proton scattering in the same $Q^2$ region.

nucl-ex↗