arXiv subjects

W. Gillard

Publications and source records attributed to W. Gillard.

At least 37 records · Page 2Linked to original sources

arXiv2026

Euclid: An automated system to match Rubin transient alerts to Euclid observations

The Vera C. Rubin observatory is expected to produce 10 million transient alerts per night in ugrizy filters, whilst Euclid is a visible to near-infrared space telescope engaged in a wide field survey. We present a prototype system to automatically match the transient alerts from Rubin to Euclid observations. The system produces joint light-curves containing both visible and near-infrared photometry, and joint image cutouts. Using Zwicky Transient Facility alerts as a proxy for Rubin, we demonstrate the system in use in cases where Euclid did and did not detect the transient and highlight the value that can be added in each case. For transients detected by Euclid these benefits include identifying the supernovae (SNe) in observations taken prior to ground-based detection, thereby better constraining the explosion time, such as SN 2024pvw detected ~3 d prior to ground based detections. In cases where Euclid did not detect the transient, we demonstrate the benefit of adding Euclid observations to improve host morphology measurements and associations.

astro-ph.IM↗

arXiv2026

Euclid. Properties and performance of the NISP signal estimator

The Euclid spacecraft, located at the second Lagrangian point of the Sun-Earth system, hosts the Near-Infrared Spectrometer and Photometer (NISP) instrument. NISP is equipped with a mosaic of 16 HgCdTe-based detectors to acquire near-infrared photometric and spectroscopic data. To meet the spacecraft's constraints on computational resources and telemetry bandwidth, the near-infrared signal is processed onboard via a dedicated hardware-software architecture designed to fulfil the stringent Euclid's data-quality requirements. A custom application software, running on the two NISP data processing units, implements the NISP signal estimator: an ad-hoc algorithm which delivers accurate flux measurements and simultaneously estimates the quality of signal estimation through the quality factor parameter. This paper investigates the properties of the NISP signal estimator by evaluating its performance during the early flight operations of the NISP instrument. First, we revisit the assumptions on which the inference of the near-infrared signal is based and investigate the origin of the main systematics of the signal estimator through Monte Carlo simulations. Then, we test the flight performance of the NISP signal estimator. Results indicate a systematic bias lower than 0.01 e/s for 99% of the NISP pixel array, well within the noise budget of the estimated signal. We also derive an analytical expression for the variance of the NISP signal estimator, demonstrating its validity, particularly when the covariance matrix is not pre-computed. Finally, we provide a robust statistical framework to interpret the QF parameter, analyse its dependence on the signal estimator bias, and show its sensitivity to cosmic ray hits on NISP detectors. Our findings corroborate previous results on the NISP signal estimator and suggest a leading-order correction based on the agreement between flight data and simulations.

astro-ph.IM↗

arXiv2026

Euclid Quick Data Release (Q1). LEMON -- Lens Modelling with Neural networks. Automated and fast modelling of Euclid gravitational lenses with a singular isothermal ellipsoid mass profile

The Euclid mission aims to survey around 14000 deg^{2} of extragalactic sky, providing around 10^{5} gravitational lens images. Modelling of gravitational lenses is fundamental to estimate the total mass of the lens galaxy, along with its dark matter content. Traditional modelling of gravitational lenses is computationally intensive and requires manual input. In this paper, we use a Bayesian neural network, LEns MOdelling with Neural networks (LEMON), to model Euclid gravitational lenses with a singular isothermal ellipsoid mass profile. Our method estimates key lens mass profile parameters, such as the Einstein radius, while also predicting the light parameters of foreground galaxies and their uncertainties. We validate LEMON's performance on both mock Euclid datasets, real lenses observed with Hubble Space Telescope (HST), and real Euclid lenses, demonstrating the ability of LEMON to predict parameters of both simulated and real lenses. Results show promising accuracy and reliability in predicting the Einstein radius, mass and light ellipticities, effective radius, Sérsic index, lens magnitude, and unlensed source position for simulated lens galaxies. The application to real data, including the latest Quick Release 1 strong lens candidates, provides encouraging results in the recovery of the parameters for real lenses. We also verified that LEMON has the potential to accelerate traditional modelling methods, by giving to the classical optimiser the LEMON predictions as starting points, resulting in a speed-up of up to 26 times the original time needed to model a sample of gravitational lenses, a result that would be impossible with randomly initialised guesses. This work represents a significant step towards efficient, automated gravitational lens modelling, which is crucial for handling the large data volumes expected from Euclid.

astro-ph.CO↗

arXiv2026

Euclid preparation: LXXXVII. Non-Gaussianity of 2-point statistics likelihood: Precise analysis of the matter power spectrum distribution

We investigate the non-Gaussian features in the distribution of the matter power spectrum multipoles. Using the COVMOS method, we generate 100\,000 mock realisations of dark matter density fields in both real and redshift space across multiple redshifts and cosmological models. We derive an analytical framework linking the non-Gaussianity of the power spectrum distribution to higher-order statistics of the density field, including the trispectrum and pentaspectrum. We explore the effect of redshift-space distortions, the geometry of the survey, the Fourier binning, the integral constraint, and the shot noise on the skewness of the distribution of the power spectrum measurements. Our results demonstrate that the likelihood of the estimated matter power spectrum deviates significantly from a Gaussian assumption on nonlinear scales, particularly at low redshift. This departure is primarily driven by the pentaspectrum contribution, which dominates over the trispectrum at intermediate scales. We also examine the impact of the finiteness of the survey geometry in the context of the Euclid mission and find that both the shape of the survey and the integral constraint amplify the skewness.

astro-ph.CO↗

arXiv2026

Euclid: Galaxy SED reconstruction in the PHZ processing function: impact on the PSF and the role of medium-band filters

Weak lensing surveys require accurate correction for the point spread function (PSF) when measuring galaxy shapes. For a diffraction-limited PSF, as arises in space-based missions, this correction depends on each galaxy SED. In the Euclid mission, galaxy SED reconstruction, a tasks of the photometric-redshift processing function (PHZ PF), relies on broad- and medium-band ancillary photometry. The limited wavelength sampling of the Euclid VIS passband and signal-to-noise ratio may affect the reconstruction accuracy and translate into biases in the weak lensing measurements. In this study, we present the methodology, which is employed in the Euclid PHZ PF, for reconstructing galaxy SEDs at 55 wavelengths, sampling the VIS passband every 10 nm, and we assess whether it fulfils the accuracy requirements imposed on the Euclid PSF model. We employ both physics- and data-driven methods, focusing on a new approach of template-based flux correction and Gaussian processes, and we introduce an SED metric whose bias propagates into PSF quadrupole moment errors. Our findings demonstrate that Gaussian processes and template fitting meet the requirements only in specific, but complementary, redshift intervals. We therefore propose a hybrid approach, which leverages both methods. This solution proves to be effective in meeting the Euclid accuracy requirements for most of the redshift range of the survey. Finally, we investigate the impact on the SED reconstruction of a new set of 16 evenly-spaced medium-band filters for the Subaru telescope, providing quasi-spectroscopic coverage of the VIS passband. This study shows promising results, ensuring accurate SED reconstruction and meeting the mission PSF requirements. This work thus provides not only the methodological foundation of galaxy SED reconstruction in the Euclid PHZ PF, but also a roadmap for future improvements using a new medium-band survey.

astro-ph.CO↗

arXiv2026

Euclid preparation. 3D reconstruction of the cosmic web with simulated Euclid Deep spectroscopic samples

The ongoing Euclid mission aims to measure spectroscopic redshifts for approximately two million galaxies using the H $α$ line emission detected in near-infrared slitless spectroscopic data from the Euclid Deep Fields (EDFs). These measurements will reach a flux limit of $5\times 10^{-17}\,{\rm erg}\,{\rm cm}^{-2}\,{\rm s}^{-1}$ in the redshift range $0.4<z<1.8$, opening the door to numerous investigations involving galaxy evolution, extending well beyond the mission's core objectives. The achieved H $α$ luminosity depth will lead to a sufficiently high sampling, enabling the reconstruction of the large-scale galaxy environment. We assess the quality of the reconstruction of the galaxy cosmic web environment with the expected spectroscopic dataset in EDFs. The analysis is carried out on the Flagship and GAEA galaxy mock catalogues. The quality of the reconstruction is first evaluated using geometrical and topological statistics measured on the cosmic web, namely the length of filaments, the area of walls, the volume of voids, and its connectivity and multiplicity. We then quantify how accurately gradients in galaxy properties with distance from filaments can be recovered. As expected, the small-scale redshift-space distortions, have a strong impact on filament lengths and connectivity, but can be mitigated by compressing galaxy groups before skeleton extraction. The cosmic web reconstruction is biased when relying solely on H $α$ emitters. This limitation can be mitigated by applying stellar mass weighting during the reconstruction. However, this approach introduces non-trivial biases that need to be accounted for when comparing to theoretical predictions. Redshift uncertainties pose the greatest challenge in recovering the expected dependence of galaxy properties, though the well-established stellar mass transverse gradients towards filaments can still be observed.

astro-ph.GA↗

arXiv2026

Euclid preparation. Galaxy 2-point correlation function modelling in redshift space

The Euclid satellite will measure spectroscopic redshifts for tens of millions of emission-line galaxies. In the context of Stage-IV surveys, the 3-dimensional clustering of galaxies plays a key role in providing cosmological constraints. In this paper, we conduct a model comparison for the multipole moments of the galaxy 2-point correlation function (2PCF) in redshift space. We test state-of-the-art models, in particular the effective field theory of large-scale structure (EFT), one based on the velocity difference generating function (VDG$_{\infty}$), and different variants of Lagrangian perturbation theory (LPT) models, such as convolutional LPT (CLPT) and its effective-field-theory extension (CLEFT). We analyse the first three even multipoles of the 2PCF in the Flagship 1 simulation, which consists of four snapshots at $z\in\{0.9,1.2,1.5,1.8\}$. We study both template-fitting and full-shape approaches and find that with the template-fitting approach, only the VDG$_{\infty}$ model is able to reach a minimum fitting scale of $s_{\rm min}=20\,h^{-1}\,{\rm Mpc}$ at $z=0.9$ without biasing the recovered parameters. Indeed, the EFT model becomes inaccurate already at $s_{\rm min}=30\,h^{-1}\,{\rm Mpc}$. Conversely, in the full-shape analysis, the CLEFT and VDG$_{\infty}$ models perform similarly well, but only the CLEFT model can reach $s_{\rm min}=20\,h^{-1}\,{\rm Mpc}$ while the VDG$_{\infty}$ model is unbiased down to $s_{\rm min}=25\,h^{-1}\,{\rm Mpc}$ at the lowest redshift. Overall, in order to achieve the accuracy required by Euclid, non-perturbative modelling such as in the VDG$_{\infty}$ or CLEFT models should be considered. At $z=1.8$, the CLPT model is sufficient to describe the data with high figure of merit. This comparison selects baseline models that perform best in ideal conditions and sets the stage for an optimal analysis of Euclid data in configuration space.

astro-ph.CO↗

arXiv2025

Euclid: Photometric redshift calibration with self-organising maps

The Euclid survey aims to trace the evolution of cosmic structures up to redshift $z$ $\sim$ 3 and beyond. Its success depends critically on obtaining highly accurate mean redshifts for ensembles of galaxies $n(z)$ in all tomographic bins, essential for deriving robust cosmological constraints. However, photometric redshifts (photo-$z$s) suffer from systematic biases arising from various sources of uncertainty. To address these challenges, we utilised self-organising maps (SOMs) with mock samples resembling the Euclid Wide Survey (EWS), to validate Euclid's uncertainty requirement of $|Δ\langle z \rangle| = \langle z_{\text{est}} \rangle - \langle z \rangle \leq 0.002 (1+z)$ per tomographic bin, assuming DR3-level data. We observe that defining the redshift tomography using the mean spectroscopic redshift (spec-$z$) per SOM cell, results in none of the ten tomographic redshift bins satisfying the requirement. In contrast, the redshift tomography on the photo-$z$s of the EWS-like sample yields superior results, with eight out of ten bins [$0 < z\leq 2.5$] meeting the Euclid requirement. To enhance the realism of our study, we morph our calibration sample to mimic the C3R2 survey in incremental steps. In this context, a maximum of six out of ten bins meet the requirement, strongly advocating the adoption of a redshift tomography defined by the photo-$z$s of individual galaxies rather than the commonly used mean spec-$z$ of SOM cells. To examine the impact on the expected biases for $Ω_{\text{m}}$, $σ_{8}$, and $Δw_{0}$ measured by Euclid, we perform a Fisher forecast for cosmic shear only, based on our redshift uncertainties. Here, we find that even under an evaluation of the uncertainty where the impact of the redshift bias is substantial, most absolute biases remain below 0.1$σ$ in the idealised scenario and below 0.3$σ$ in the more realistic case.

astro-ph.CO↗

arXiv2025

Euclid Quick Data Release (Q1). Spectroscopic unveiling of highly ionised lines at z = 2.48-3.88

This study explores a rare population of sources in a currently uncharted region of spectroscopic redshift space in the Euclid Quick Data Release (Q1), and is intended potentially to support upcoming spectroscopic studies. Our goal is to identify and investigate a population of sources characterised by highly ionised emission lines in their spectra, which are indicative of active galactic nucleus activity, extreme shock phenomena, or Wolf--Rayet stars. A comprehensive visual inspection of spectra is conducted to ensure the reliability of the sample, focusing on the simultaneous detection of both NeV and OII emission-line measurements, a condition that restricts the Euclid spectroscopic redshift range to z=2.48--3.88. To characterise this population, we analysed the morpho-spectrophotometric properties of their host galaxies. This allowed for a direct comparison with control sources that exhibit similar OII properties and spectroscopic redshifts, but not NeV lines. We identify sources solely based on spectroscopic criteria in the redshift range beyond the Halpha regime. Encompassing 65 potential NeV candidates, the resulting sample delivers the first systematic probe of these NeV candidate emitters at high redshift. We found a good agreement, within 1$σ$, between the spectral measurements calculated using both direct integration and Gaussian fitting methodologies. The NeV candidates exhibit colours similar to bright QSOs, with only a few in the tail of very red quasars. We observed a higher stellar mass content, a lower continuum around the 4000A break, and a similar Sérsic index distribution compared to the control sample. This unique sample paves the way for a wide range of scientific investigations, which will be pursued in the forthcoming data releases.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1). Extending the quest for little red dots to z<4

Recent James Webb Space Telescope (JWST) observations have revealed a population of sources with a compact morphology and a characteristic `v-shaped' continuum, namely blue at rest-frame $λ<4000$A and red at longer wavelengths. The nature of these sources, called `little red dots' (LRDs), is still debated, as it is unclear if they host active galactic nuclei (AGN) and their number seems to drastically drop at z<4. We take advantage of the $63 °^2$ covered by the quick Euclid Quick Data Release (Q1) to extend the search for LRDs to brighter magnitudes and to lower redshifts than what has been possible with JWST. The selection is performed by fitting the available photometric data (Euclid, the Spitzer Infrared Array Camera (IRAC), and ground-based $griz$ data) with two power laws, to retrieve both the rest-frame optical and UV slopes consistently over a large redshift range (i.e, z<7.6). We exclude extended objects and possible line emitters, and perform a careful visual inspection to remove any imaging artefacts. The final selection includes 3341 LRD candidates at z=0.33-3.6, with 29 detected also in IRAC. The resulting rest-frame UV luminosity function, in contrast with previous JWST studies, shows that the number density of LRD candidates increases from high-z down to z=1.5-2.5 and decreases at lower z. However, less evolution is apparent focusing on the subsample of more robust LRD candidates having IRAC detections, which however has low statistics and limited by the IRAC resolution. The comparison with previous quasar (QSO) UV luminosity functions shows that LRDs are not the dominant AGN population at z<4 and $M_{\rm UV}<-21$. Follow-up studies of these LRD candidates are pivotal to confirm their nature, probe their physical properties and check for their compatibility with JWST sources, given the different spatial resolution and wavelength coverage of Euclid and JWST.

astro-ph.GA↗

arXiv2025

Euclid preparation. Cosmology Likelihood for Observables in Euclid (CLOE). 6: Impact of systematic uncertainties on the cosmological analysis

Extracting cosmological information from the Euclid galaxy survey will require modelling numerous systematic effects during the inference process. This implies varying a large number of nuisance parameters, which have to be marginalised over before reporting the constraints on the cosmological parameters. This is a delicate process, especially with such a large parameter space, which could result in biased cosmological results. In this work, we study the impact of different choices for modelling systematic effects and prior distribution of nuisance parameters for the final Euclid Data Release, focusing on the 3$\times$2pt analysis for photometric probes and the galaxy power spectrum multipoles for the spectroscopic probes. We explore the effect of intrinsic alignments, linear galaxy bias, magnification bias, multiplicative cosmic shear bias and shifts in the redshift distribution for the photometric probes, as well as the purity of the spectroscopic sample. We find that intrinsic alignment modelling has the most severe impact with a bias up to $6\,σ$ on the Hubble constant $H_0$ if neglected, followed by mis-modelling of the redshift evolution of galaxy bias, yielding up to $1.5\,σ$ on the parameter $S_8\equivσ_8\sqrt{Ω_{\rm m} /0.3}$. Choosing a too optimistic prior for multiplicative bias can also result in biases of the order of $0.7\,σ$ on $S_8$. We also find that the precision on the estimate of the purity of the spectroscopic sample will be an important driver for the constraining power of the galaxy clustering full-shape analysis. These results will help prioritise efforts to improve the modelling and calibration of systematic effects in Euclid.

astro-ph.CO↗

arXiv2025

Euclid preparation. Predicting star-forming galaxy scaling relations with the spectral stacking code SpectraPyle

We introduce SpectraPyle, a versatile spectral stacking pipeline developed for the Euclid mission's NISP spectroscopic surveys, aimed at extracting faint emission lines and spectral features from large galaxy samples in the Wide and Deep Surveys. Designed for computational efficiency and flexible configuration, SpectraPyle supports the processing of extensive datasets critical to Euclid's non-cosmological science goals. We validate the pipeline using simulated spectra processed to match Euclid's expected final data quality. Stacking enables robust recovery of key emission lines, including Halpha, Hbeta, [O III], and [N II], below individual detection limits. However, the measurement of galaxy properties such as star formation rate, dust attenuation, and gas-phase metallicity are biased at stellar mass below log10(M*/Msol) ~ 9 due to the flux-limited nature of Euclid spectroscopic samples, which cannot be overcome by stacking. The SFR-stellar mass relation of the parent sample is recovered reliably only in the Deep survey for log10(M*/Msol) > 10, whereas the metallicity-mass relation is recovered more accurately over a wider mass range. These limitations are caused by the increased fraction of redshift measurement errors at lower masses and fluxes. We examine the impact of residual redshift contaminants that arises from misidentified emission lines and noise spikes, on stacked spectra. Even after stringent quality selections, low-level contamination (< 6%) has minimal impact on line fluxes due to the systematically weaker emission of contaminants. Percentile-based analysis of stacked spectra provides a sensitive diagnostic for detecting contamination via coherent spurious features at characteristic wavelengths. While our simulations include most instrumental effects, real Euclid data will require further refinement of contamination mitigation strategies.

astro-ph.GA↗

arXiv2025

Euclid preparation: The NISP spectroscopy channel, on ground performance and calibration

ESA's Euclid cosmology mission relies on the very sensitive and accurately calibrated spectroscopy channel of the Near-Infrared Spectrometer and Photometer (NISP). With three operational grisms in two wavelength intervals, NISP provides diffraction-limited slitless spectroscopy over a field of $0.57$ deg$^2$. A blue grism $\text{BG}_\text{E}$ covers the wavelength range $926$--$1366$\,nm at a spectral resolution $R=440$--$900$ for a $0.5''$ diameter source with a dispersion of $1.24$ nm px$^{-1}$. Two red grisms $\text{RG}_\text{E}$ span $1206$ to $1892$\,nm at $R=550$--$740$ and a dispersion of $1.37$ nm px$^{-1}$. We describe the construction of the grisms as well as the ground testing of the flight model of the NISP instrument where these properties were established.

astro-ph.IM↗

arXiv2025

Euclid: Methodology for derivation of IPC-corrected conversion gain of nonlinear CMOS APS

We introduce a fast method to measure the conversion gain in Complementary Metal-Oxide-Semiconductors (CMOS) Active Pixel Sensors (APS), which accounts for nonlinearity and interpixel capacitance (IPC). The standard 'mean-variance' method is biased because it assumes pixel values depend linearly on signal, and existing methods to correct for nonlinearity are still introducing significant biases. While current IPC correction methods are prohibitively slow for a per-pixel application, our new method uses separate measurements of the IPC kernel to make an almost instantaneous calculation of gain. Validated using test data from a flight detector from the ESA Euclid mission, the IPC correction recovers the results of slower methods within 0.1% accuracy. Meanwhile the nonlinearity correction ensures an estimation of the gain that is independent of signal, correcting a bias of more than 2.5% on gain estimation.

physics.ins-det↗

arXiv2025

Euclid: The potential of slitless infrared spectroscopy: A z=5.4 quasar and new ultracool dwarfs

We demonstrate the potential of Euclid's slitless spectroscopy to discover high-redshift (z>5) quasars and their main photometric contaminant, ultracool dwarfs. Sensitive infrared spectroscopy from space is able to efficiently identify both populations, as demonstrated by Euclid Near-Infrared Spectrometer and Photometer Red Grism (NISP RGE) spectra of the newly discovered z=5.404 quasar EUCL J181530.01+652054.0, as well as several ultracool dwarfs in the Euclid Deep Field North and the Euclid Early Release Observation field Abell 2764. The ultracool dwarfs were identified by cross-correlating their spectra with templates. The quasar was identified by its strong and broad CIII] and MgII emission lines in the NISP RGE 1206-1892 nm spectrum, and confirmed through optical spectroscopy from the Large Binocular Telescope. The NISP Blue Grism (NISP BGE) 926-1366 nm spectrum confirms CIV and CIII] emission. NISP RGE can find bright quasars at z~5.5 and z>7, redshift ranges that are challenging for photometric selection due to contamination from ultracool dwarfs. EUCL J181530.01+652054.0 is a high-excitation, broad absorption line quasar detected at 144 MHz by the LOw-Frequency Array (L144=4e25 W/Hz). The quasar has a bolometric luminosity of 3e12 Lsun and is powered by a 3.4e9 Msun black hole. The discovery of this bright quasar is noteworthy as fewer than one such object was expected in the ~20 deg2 surveyed. This finding highlights the potential and effectiveness of NISP spectroscopy in identifying rare, luminous high-redshift quasars, previewing the census of these sources that Euclid's slitless spectroscopy will deliver over about 14,000 deg2 of the sky.

astro-ph.GA↗

arXiv2025

Euclid preparation. Establishing the quality of the 2D reconstruction of the filaments of the cosmic web with DisPerSE using Euclid photometric redshifts

Cosmic filaments are prominent structures of the matter distribution of the Universe. Modern detection algorithms are an efficient way to identify filaments in large-scale observational surveys of galaxies. Many of these methods were originally designed to work with simulations and/or well-sampled spectroscopic surveys. When spectroscopic redshifts are not available, the filaments of the cosmic web can be detected in projection using photometric redshifts in slices along the Line of Sight, which enable the exploration of larger cosmic volumes. However, this comes at the expense of a lower redshift precision. It is therefore crucial to assess the differences between filaments extracted from exact redshifts and from photometric redshifts for a specific survey. We apply this analysis to capture the uncertainties and biases of filament extractions introduced by using the photometric sample of the Euclid Wide Survey. The question that we address in this work is how can we compare two filament samples derived with redshifts of different precisions in the Euclid Wide Survey context. We apply the cosmic web detection algorithm DisPerSE, in the redshift range $0.1 \leq z \leq 0.5$, to the GAlaxy Evolution and Assembly (GAEA) simulated galaxy sample which reproduces several characteristics of the Euclid Wide Survey. We develop a method to compare skeletons derived from photometric redshifts to those derived from true galaxy positions. This method expands the commonly used measure of distance between filaments to include geometrical (angles between filaments) and astrophysical considerations (galaxy mass gradients and connectivity-mass relations). We assess whether this approach strengthens our ability to correctly identify filaments in very large surveys such as the Euclid Wide Survey. [abridged]

astro-ph.CO↗

arXiv2025

Euclid VI. NISP-P optical ghosts

The Near-Infrared Spectrometer and Photometer (NISP) onboard Euclid includes several optical elements in its path, which introduce artefacts into the data from non-nominal light paths. To ensure uncontaminated source photometry, these artefacts must be accurately accounted for. This paper focuses on two specific optical features in NISP's photometric data (NISP-P): ghosts caused by the telescope's dichroic beamsplitter, and the bandpass filters within the NISP fore-optics. Both ghost types exhibit a characteristic morphology and are offset from the originating stars. The offsets are well modelled using 2D polynomials, with only stars brighter than approximately 10 magnitudes in each filter producing significant ghost contributions. The masking radii for these ghosts depend on both the source-star brightness and the filter wavelength, ranging from 20 to 40 pixels. We present the final relations and models used in the near-infrared (NIR) data pipeline to mask these ghosts for Euclid's Quick Data Release (Q1).

astro-ph.IM↗

arXiv2025

Euclid preparation. Overview of Euclid infrared detector performance from ground tests

The paper describes the objectives, design and findings of the pre-launch ground characterisation campaigns of the Euclid infrared detectors. The pixel properties, including baseline, bad pixels, quantum efficiency, inter pixel capacitance, quantum efficiency, dark current, readout noise, conversion gain, response nonlinearity, and image persistence were measured and characterised for each pixel. We describe in detail the test flow definition that allows us to derive the pixel properties and we present the data acquisition and data quality check software implemented for this purpose. We also outline the measurement protocols of all the pixel properties presented and we provide a comprehensive overview of the performance of the Euclid infrared detectors as derived after tuning the operating parameters of the detectors. The main conclusion of this work is that the performance of the infrared detectors Euclid meets the requirements. Pixels classified as non-functioning accounted for less than 0.2% of all science pixels. IPC coupling is minimal and crosstalk between adjacent pixels is less than 1% between adjacent pixels. 95% of the pixels show a QE greater than 80% across the entire spectral range of the Euclid mission. The conversion gain is approximately 0.52 ADU/e-, with a variation less than 1% between channels of the same detector. The reset noise is approximately equal to 23 ADU after reference pixels correction. The readout noise of a single frame is approximately 13 $e^-$ while the signal estimator noise is measured at 7 $e^-$ in photometric mode and 9 $e^-$ in spectroscopic acquisition mode. The deviation from linear response at signal levels up to 80 k$e^-$ is less than 5% for 95% of the pixels. Median persistence amplitudes are less than 0.3% of the signal, though persistence exhibits significant spatial variation and differences between detectors.

astro-ph.IM↗