arXiv subjects

W. Hanna

Publications and source records attributed to W. Hanna.

7 recordsLinked to original sources

arXiv2026

Constraining the size, shape, and albedo of the large Trans-Neptunian Object (28978) Ixion with multi-chord stellar occultations

Trans-Neptunian objects (TNOs) are among the most primitive remnants of the early Solar System, and constraining their sizes, shapes, albedos, and surface properties is essential for understanding their origin and evolution. Stellar occultations provide highly accurate size and shape measurements for TNOs, while photometry constrains their albedo and surface colours. (28978) Ixion is one of the largest TNOs and a prominent Plutino, making it a key target for comparative studies. We aim to constrain Ixion's projected size, shape, absolute magnitude, geometric albedo, and surface colours, and to search for evidence of an atmosphere or circum-object material. We analysed stellar occultation campaigns by Ixion conducted between 2020 and 2023 within the Lucky Star collaboration, comprising 51 observations from eight events, including 30 positive detections. Five multi-chord events enabled a global limb fit and an accurate reconstruction of Ixion's projected shape. The occultations reveal a slightly elongated limb well represented by a single projected ellipse, yielding an area-equivalent diameter of $D_{\mathrm{equiv}} = 696.78^{+10.75}_{-8.87}$ km and an apparent oblateness $\epsilon' = 0.081^{+0.004}_{-0.010}$. Typical radial residuals of order $\sim$10 km indicate a largely stable shape across epochs, with modest epoch-dependent variations. Calibrated photometric data yield an absolute magnitude of $H_V = 3.845 \pm 0.006$, a phase-curve slope of $\beta = 0.1301 \pm 0.0078$ mag deg$^{-1}$, and a visible geometric albedo of $p_V = 0.106^{+0.003}_{-0.003}$, with colours consistent with moderately red TNO surfaces. No atmosphere or circum-object material is detected down to our sensitivity limits. The best-sampled event also allows a precise measurement of the angular diameter of the occulted star Gaia DR3 4056440205544338944, $\theta_\star = 0.670 \pm 0.010$ mas.

astro-ph.EP↗

arXiv2025

Asteroid sizes determined with thermophysical model and stellar occultations

Context. The sizes of many asteroids, especially slowly rotating, low-amplitude targets, remain poorly constrained due to selection effects. These biases limit the availability of high-quality data, leaving size estimates reliant on spherical shape assumptions. Such approximations introduce significant uncertainties propagating, e.g. into density determinations or thermophysical and compositional studies, affecting our understanding of asteroid properties. Aims. This work targets poorly studied main-belt asteroids, most of which lacked shape models. Using only high-quality dense light curves, thermal IR observations (incl. WISE), and stellar occultations, we aimed to produce reliable shape models and scale them via two independent techniques, allowing size comparison. We conducted two campaigns to obtain dense photometric light curves and to acquire multi-chord stellar occultations. Methods. Shape and spin models were reconstructed using lightcurve inversion. Sizes were determined by (1) thermophysical modeling with the Convex Inversion Thermophysical Model (CITPM), optimizing spin and shape models to visible lightcurve and IR data, and (2) scaling shape models with stellar occultations. Results. We obtained precise sizes and shape models for 15 asteroids. CITPM- and occultation-derived sizes agree within 5% in most cases, demonstrating the modeling's reliability. Larger discrepancies usually stem from incomplete occultation chord coverage. The study also gives insights into surface properties incl. albedo, roughness and thermal inertia. Conclusions. Using high-quality data and an advanced TPM integrating thermal and visible data with shape adjustment enabled precise size estimates comparable to those from multi-chord stellar occultations. We resolved major inconsistencies in previous size estimates, providing solid input for future studies on asteroid densities and surfaces.

astro-ph.EP↗

arXiv2023

Kilometer-precise (UII) Umbriel physical properties from the multichord stellar occultation on 2020 September 21

We report the results of the stellar occultation by (UII) Umbriel on September 21st, 2020. The shadow crossed the USA and Canada, and 19 positive chords were obtained. A limb parameter accounted for putative topographic features in the limb fittings. Ellipse fittings were not robust - only upper limits were derived for the true size/shape of a putative Umbriel ellipsoid. The adopted spherical solution gives radius = 582.4 +/- 0.8 km, smaller/close to 584.7 +/- 2.8 km from Voyager II. The apparent ellipse fit results in a true semi-major axis of 584.9 +/- 3.8 km, semi-minor axes of 582.3 +/- 0.6 km and true oblateness of 0.004 +/- 0.008 for a putative ellipsoid. The geometric albedo was pV = 0.26 +/- 0.01. The density was rho = 1.54 +/- 0.04 g cm-3. The surface gravity was 0.251 +/- 0.006 m s-2 and the escape velocity 0.541 +/- 0.006 km s-1 . Upper limits of 13 and 72 nbar (at 1 sigma and 3 sigma levels, respectively) were obtained for the surface pressure of a putative isothermal CO2 atmosphere at T = 70 K. A milliarcsecond precision position was derived: RA = 02h 30m 28.84556s +/- 0.1 mas, DE = 14o 19' 36.5836" +/- 0.2 mas. A large limb parameter of 4.2 km was obtained, in striking agreement with opposite southern hemisphere measurements by Voyager II in 1986. Occultation and Voyager results indicate that the same strong topography variation in the surface of Umbriel is present on both hemispheres.

astro-ph.EP↗

arXiv2023

Scaling slowly rotating asteroids by stellar occultations

As evidenced by recent survey results, majority of asteroids are slow rotators (P>12 h), but lack spin and shape models due to selection bias. This bias is skewing our overall understanding of the spins, shapes, and sizes of asteroids, as well as of their other properties. Also, diameter determinations for large (>60km) and medium-sized asteroids (between 30 and 60 km) often vary by over 30% for multiple reasons. Our long-term project is focused on a few tens of slow rotators with periods of up to 60 hours. We aim to obtain their full light curves and reconstruct their spins and shapes. We also precisely scale the models, typically with an accuracy of a few percent. We used wide sets of dense light curves for spin and shape reconstructions via light-curve inversion. Precisely scaling them with thermal data was not possible here because of poor infrared data: large bodies are too bright for WISE mission. Therefore, we recently launched a campaign among stellar occultation observers, to scale these models and to verify the shape solutions, often allowing us to break the mirror pole ambiguity. The presented scheme resulted in shape models for 16 slow rotators, most of them for the first time. Fitting them to stellar occultations resolved previous inconsistencies in size determinations. For around half of the targets, this fitting also allowed us to identify a clearly preferred pole solution, thus removing the ambiguity inherent to light-curve inversion. We also address the influence of the uncertainty of the shape models on the derived diameters. Overall, our project has already provided reliable models for around 50 slow rotators. Such well-determined and scaled asteroid shapes will, e.g. constitute a solid basis for density determinations when coupled with mass information. Spin and shape models continue to fill the gaps caused by various biases.

astro-ph.EP↗

arXiv2021

Refined physical parameters for Chariklo's body and rings from stellar occultations observed between 2013 and 2020

The Centaur (10199) Chariklo has the first rings system discovered around a small object. It was first observed using stellar occultation in 2013. Stellar occultations allow the determination of sizes and shapes with kilometre accuracy and obtain characteristics of the occulting object and its vicinity. Using stellar occultations observed between 2017 and 2020, we aim at constraining Chariklo's and its rings physical parameters. We also determine the rings' structure, and obtain precise astrometrical positions of Chariklo. We predicted and organised several observational campaigns of stellar occultations by Chariklo. Occultation light curves were measured from the data sets, from which ingress and egress times, and rings' width and opacity were obtained. These measurements, combined with results from previous works, allow us to obtain significant constraints on Chariklo's shape and rings' structure. We characterise Chariklo's ring system (C1R and C2R), and obtain radii and pole orientations that are consistent with, but more accurate than, results from previous occultations. We confirmed the detection of W-shaped structures within C1R and an evident variation of radial width. The observed width ranges between 4.8 and 9.1 km with a mean value of 6.5 km. One dual observation (visible and red) does not reveal any differences in the C1R opacity profiles, indicating ring particle's size larger than a few microns. The C1R ring eccentricity is found to be smaller than 0.022 (3-sigma), and its width variations may indicate an eccentricity higher than 0.005. We fit a tri-axial shape to Chariklo's detections over eleven occultations and determine that Chariklo is consistent with an ellipsoid with semi-axes of 143.8, 135.2 and 99.1 km. Ultimately, we provided seven astrometric positions at a milliarcseconds accuracy level, based on Gaia EDR3, and use it to improve Chariklo's ephemeris.

astro-ph.EP↗

arXiv2020

Stellar occultations enable milliarcsecond astrometry for Trans-Neptunian objects and Centaurs

Trans-Neptunian objects (TNOs) and Centaurs are remnants of our planetary system formation, and their physical properties have invaluable information for evolutionary theories. Stellar occultation is a ground-based method for studying these small bodies and has presented exciting results. These observations can provide precise profiles of the involved body, allowing an accurate determination of its size and shape. The goal is to show that even single-chord detections of TNOs allow us to measure their milliarcsecond astrometric positions in the reference frame of the Gaia second data release (DR2). Accurated ephemerides can then be generated, allowing predictions of stellar occultations with much higher reliability. We analyzed data from stellar occultations to obtain astrometric positions of the involved bodies. The events published before the Gaia era were updated so that the Gaia DR2 catalog is the reference. Previously determined sizes were used to calculate the position of the object center and its corresponding error with respect to the detected chord and the International Celestial Reference System (ICRS) propagated Gaia DR2 star position. We derive 37 precise astrometric positions for 19 TNOs and 4 Centaurs. Twenty-one of these events are presented here for the first time. Although about 68\% of our results are based on single-chord detection, most have intrinsic precision at the submilliarcsecond level. Lower limits on the diameter and shape constraints for a few bodies are also presented as valuable byproducts. Using the Gaia DR2 catalog, we show that even a single detection of a stellar occultation allows improving the object ephemeris significantly, which in turn enables predicting a future stellar occultation with high accuracy. Observational campaigns can be efficiently organized with this help, and may provide a full physical characterization of the involved object.

astro-ph.EP↗

arXiv2019

The first observed stellar occultations by the irregular satellite (Saturn IX) Phoebe and improved rotational period

We report six stellar occultations by (Saturn IX) Phoebe, an irregular satellite of Saturn, obtained between mid-2017 and mid-2019. The 2017 July 06 event is the first stellar occultation by an irregular satellite ever observed. The occultation chords were compared to a 3D shape model of the satellite obtained from Cassini observations. The rotation period available in the literature led to a sub-observer point at the moment of the observed occultations where the chords could not fit the 3D model. A procedure was developed to identify the correct sub-observer longitude. It allowed us to obtain the rotation period with improved precision over currently known value from literature. We show that the difference between the observed and the predicted sub-observer longitude suggests two possible solutions for the rotation period. By comparing these values with recently observed rotational light curves and single-chord stellar occultations, we can identify the best solution for Phoebe's rotational period as $9.27365 \pm 0.00002$ h. From the stellar occultations, we also obtained 6 geocentric astrometric positions in the ICRS as realised by the Gaia-DR2 with uncertainties at the 1-mas level.

astro-ph.EP↗