SearcharxivSearch

arXiv subjects

W. Kaabi

Publications and source records attributed to W. Kaabi.

7 recordsLinked to original sources

Sustainability Assessment of Future Accelerators

The Large Particle Physics Laboratory Directors Group (LDG) established the Working Group (WG) on the Sustainability Assessment of Future Accelerators in 2024 with the mandate to develop guidelines and a list of key parameters for the assessment of the sustainability of future accelerators in particle physics. While focused on accelerator projects, much of the work will also be relevant to other present and upcoming research infrastructures. The development and continuous update of such a framework aim to enable a coherent communication amongst scientists and adequately convey the information to a broader set of stakeholders. This document outlines the key findings and recommendations of the LDG Sustainability WG and provides a summary of current best practices aimed at enabling sustainable accelerator-based research infrastructures. Not all sustainability topics are addressed at the same level. The assessment process is complex, largely under development and a homogeneous evaluation of all the aspects requires a strategy to be developed and implemented over time.

physics.acc-ph

Sustainability Assessment of Future Accelerators

The Large Particle Physics Laboratory Directors Group (LDG) established the Working Group on the Sustainability Assessment of Future Accelerators in 2024 with the mandate to develop guidelines and a list of key parameters for the assessment of the sustainability of future accelerators in particle physics. While focused on accelerator projects, much of the work will also be relevant to other current and future Research Infrastructures. The development and continuous update of such a framework aim to enable a coherent communication amongst scientists and adequately convey the information to a broader set of stakeholders. This document outlines the major findings and recommendations from the LDG Sustainability WG report - a summary of current best practices recommended to be adopted by new Research Infrastructures. The full report will be available in June 2025 at: https://ldg.web.cern.ch/working-groups/sustainability-assessment-of-accelerators. Not all of sustainability topics are addressed at the same level. The assessment process is complex, largely under development and a homogeneous evaluation of all the aspects deserves a strategy to be pursued over time.

hep-ex

HOM-Damping Studies in a Multi-Cell Elliptical Superconducting RF Cavity for the Multi-Turn Energy Recovery Linac PERLE

Higher order mode (HOM) damping is a crucial issue for the next generation of high-current energy recovery linacs (ERLs). Beam-induced HOMs can store sufficient energy in the superconducting RF (SRF) cavities, giving rise to beam instabilities and increasing the heat load at cryogenic temperatures. To limit these effects, using HOM couplers on the cutoff tubes of SRF cavities becomes crucial to absorb beam-induced wakefields consisting of all cavity eigenmodes. The study presented here focuses on a 5-cell 801.58 MHz elliptical SRF cavity designed for the multi-turn energy recovery linac PERLE (Powerful Energy Recovery Linac for Experiments). Several coaxial coupler designs are analyzed and optimized to enhance the damping of monopole and dipole HOMs of the 5-cell cavity. The broadband performance of HOM damping is also confirmed by the time-domain wakefield and the frequency-domain simulations. In addition, the thermal behavior of the HOM couplers is investigated. A comparison between various HOM-damping schemes is carried out to guarantee an efficient HOM power extraction from the cavity.

physics.acc-ph

European Strategy for Particle Physics -- Accelerator R&D Roadmap

The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified in the Strategy update. The R&D objectives include: improvement of the performance and cost-performance of magnet and radio-frequency acceleration systems; investigations of the potential of laser / plasma acceleration and energy-recovery linac techniques; and development of new concepts for muon beams and muon colliders. The goal of the roadmap is to document the collective view of the field on the next steps for the R&D programme, and to provide the evidence base to support subsequent decisions on prioritisation, resourcing and implementation.

physics.acc-ph

The Compact Linear Collider (CLIC) - 2018 Summary Report

The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.

physics.acc-ph

PERLE: Powerful Energy Recovery Linac for Experiments - Conceptual Design Report

A conceptual design is presented of a novel ERL facility for the development and application of the energy recovery technique to linear electron accelerators in the multi-turn, large current and large energy regime. The main characteristics of the powerful energy recovery linac experiment facility (PERLE) are derived from the design of the Large Hadron electron Collider, an electron beam upgrade under study for the LHC, for which it would be the key demonstrator. PERLE is thus projected as a facility to investigate efficient, high current (> 10 mA) ERL operation with three re-circulation passages through newly designed SCRF cavities, at 801.58 MHz frequency, and following deceleration over another three re-circulations. In its fully equipped configuration, PERLE provides an electron beam of approximately 1 GeV energy. A physics programme possibly associated with PERLE is sketched, consisting of high precision elastic electron-proton scattering experiments, as well as photo-nuclear reactions of unprecedented intensities with up to 30 MeV photon beam energy as may be obtained using Fabry-Perot cavities. The facility has further applications as a general technology test bed that can investigate and validate novel superconducting magnets (beam induced quench tests) and superconducting RF structures (structure tests with high current beams, beam loading and transients). Besides a chapter on operation aspects, the report contains detailed considerations on the choices for the SCRF structure, optics and lattice design, solutions for arc magnets, source and injector and on further essential components. A suitable configuration derived from the here presented design concept may next be moved forward to a technical design and possibly be built by an international collaboration which is being established.

physics.acc-ph

Updated baseline for a staged Compact Linear Collider

The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-quark measurements. Subsequent stages will focus on measurements of rare Higgs processes, as well as searches for new physics processes and precision measurements of new states, e.g. states previously discovered at LHC or at CLIC itself. In the 2012 CLIC Conceptual Design Report, a fully optimised 3 TeV collider was presented, while the proposed lower energy stages were not studied to the same level of detail. This report presents an updated baseline staging scenario for CLIC. The scenario is the result of a comprehensive study addressing the performance, cost and power of the CLIC accelerator complex as a function of centre-of-mass energy and it targets optimal physics output based on the current physics landscape. The optimised staging scenario foresees three main centre-of-mass energy stages at 380 GeV, 1.5 TeV and 3 TeV for a full CLIC programme spanning 22 years. For the first stage, an alternative to the CLIC drive beam scheme is presented in which the main linac power is produced using X-band klystrons.

physics.acc-ph