arXiv subjects

W. Noga

Publications and source records attributed to W. Noga.

At least 19 recordsLinked to original sources

arXiv2026

Studies of the Modular COsmic Ray Detector (MCORD) using an automatic temperature control loop to maintain constant gain parameters of semiconductor SiPM photomultipliers

The MCORD detector is a modular scintillator-based system employing silicon photomultipliers (SiPMs) and FPGA-based digital signal processing, designed for applications such as cosmic muon detection, veto systems, and detector calibration support. In this work, we investigate the influence of ambient temperature variations on detector performance, with particular emphasis on SiPM gain stability. Several automatic temperature compensation loops were implemented to stabilize the operating voltage of the sensors. Based on controlled laboratory measurements, we evaluate the effectiveness of different control strategies, including variations in temperature averaging time and threshold response criteria. The performance of each approach is compared in terms of gain stability and response dynamics. We identify the optimal temperature control configuration for planned MCORD measurements and present recent modifications to the detector electronics, including updated software for AFE control. Additionally, we describe modifications made to the detectors electronics since the previous publication, including new software developed to control the AFE electronics.

physics.ins-det↗

arXiv2026

Optical calibration systems of the Pacific Ocean Neutrino Experiment

This work presents the design and performance characterization of the optical calibration systems produced for the Pacific Ocean Neutrino Experiment (P-ONE), which target gain, energy and time calibration in the detector. These systems include novel light-pulse driver circuitry based on gallium nitride field-effect transistor technology and its application to directional and isotropic, self-monitoring optical calibration instruments. A total of 330 directional light pulsers and two isotropic, 17-inch calibration modules (P-CALs) were produced for the first P-ONE line. We present the designs and performance of both the directional and isotropic calibration devices and perform detailed optical characterizations of both full-production batches. In a wavelength range of $365 - 520\,$nm, our developed driver circuits achieve emission intensities up to $10^{11}\,$photons and pulse widths as small as $1.4\,$ns, respectively. Light-pulse drivers and self-monitoring electronics in the P-CAL were characterized using the same experimental setup, and the instrument's optical-isotropy design was optimized in combination with a dedicated GEANT4-based simulation framework. The optimized P-CAL achieves a simulated isotropy grade of $1.00 \pm 0.01$ across the entire $4\pi\,$solid angle range. These simulation investigations were explicitly confirmed by dedicated measurements in both air and water using two independent experimental setups, and we report the results. With this, a detailed performance estimate for deployed P-CAL modules in P-ONE was possible.

physics.ins-det↗

arXiv2025

Long term study of sedimentation and biofouling at Cascadia Basin, the site of the Pacific Ocean Neutrino Experiment

STRings for Absorption Length in Water (STRAW)-a and b were pathfinder instruments deployed to characterize the anticipated site of the Pacific Ocean Neutrino Experiment (P-ONE), which is a future neutrino telescope that will be located in the North Pacific Ocean. Measurements of the evolution of the optical transmission efficiency from STRAW-a showed a decline over the detector's lifetime for the upward-facing modules. Video footage of the pathfinders strongly suggested this decline was caused by biofouling and sedimentation. We measure the effect of biofouling and sedimentation to be a decrease in the transparency of upward-facing optical surfaces over 5 years of operations. A majority of downward-facing optical surfaces, which will dominate P-ONE's sensitivity to astrophysical sources, showed no visible biofouling. Extrapolations motivated by biological growth models estimated that these losses started around 2.5 years after deployment, and suggest a reduction in transparency ranging from 35$\%$ of the original to complete obscuration for the upward-facing modules. Samples of biofouling were taken in order to identify the microbial diversity of these organisms and inform potential intervention strategies. Results of the microbial samples and a candidate anti-biofouling strategy that will be tested on upcoming P-ONE instruments are discussed.

hep-ex↗

arXiv2025

Prototype acoustic positioning system for the Pacific Ocean Neutrino Experiment

We present the design and initial performance characterization of the prototype acoustic positioning system intended for the Pacific Ocean Neutrino Experiment. It comprises novel piezo-acoustic receivers with dedicated filtering- and amplification electronics installed in P-ONE instruments and is complemented by a commercial system comprised of cabled and autonomous acoustic pingers for sub-sea installation manufactured by Sonardyne Ltd. We performed an in-depth characterization of the acoustic receiver electronics and their acoustic sensitivity when integrated into P-ONE pressure housings. These show absolute sensitivities of up to $-125\,$dB re V$^2/\mu$Pa$^2$ in a frequency range of $10-40\,$kHz. We furthermore conducted a positioning measurement campaign in the ocean by deploying three autonomous acoustic pingers on the seafloor, as well as a cabled acoustic interrogator and a P-ONE prototype module deployed from a ship. Using a simple peak-finding detection algorithm, we observe high accuracy in the tracking of relative ranging times at approximately $230-280\,\mu$s at distances of up to $1600\,$m, which is sufficient for positioning detectors in a cubic-kilometer detector and which can be further improved with more involved detection algorithms. The tracking accuracy is further confirmed by independent ranging of the Sonardyne system and closely follows the ship's drift in the wind measured by GPS. The absolute positioning shows the same tracking accuracy with its absolute precision only limited by the large uncertainties of the deployed pinger positions on the seafloor.

physics.ins-det↗

arXiv2021

Measuring muon tracks in Baikal-GVD using a fast reconstruction algorithm

The Baikal Gigaton Volume Detector (Baikal-GVD) is a km$^3$-scale neutrino detector currently under construction in Lake Baikal, Russia. The detector consists of several thousand optical sensors arranged on vertical strings, with 36 sensors per string. The strings are grouped into clusters of 8 strings each. Each cluster can operate as a stand-alone neutrino detector. The detector layout is optimized for the measurement of astrophysical neutrinos with energies of $\sim$ 100 TeV and above. Events resulting from charged current interactions of muon (anti-)neutrinos will have a track-like topology in Baikal-GVD. A fast $χ^2$-based reconstruction algorithm has been developed to reconstruct such track-like events. The algorithm has been applied to data collected in 2019 from the first five operational clusters of Baikal-GVD, resulting in observations of both downgoing atmospheric muons and upgoing atmospheric neutrinos. This serves as an important milestone towards experimental validation of the Baikal-GVD design. The analysis is limited to single-cluster data, favoring nearly-vertical tracks.

hep-ex↗

arXiv2021

Follow up of the IceCube alerts with the Baikal-GVD telescope

The high-energy muon neutrino events of the IceCube telescope, that are triggered as neutrino alerts in one of two probability ranks of astrophysical origin, "gold" and "bronze", have been followed up by the Baikal-GVD in a fast quasi-online mode since September 2020. Search for correlations between alerts and GVD events reconstructed in two modes, muon-track and cascades (electromagnetic or hadronic showers), for the time windows $ \pm $ 1 h and $ \pm $ 12 h does not indicate statistically significant excess of the measured events over the expected number of background events. Upper limits on the neutrino fluence will be presented for each alert.

astro-ph.HE↗

arXiv2021

Method and portable bench for tests of the laser optical calibration system components for the Baikal-GVD underwater neutrino Cherenkov telescope

The large-scale deep underwater Cherenkov neutrino telescopes like Baikal-GVD, ANTARES or KM3NeT, require calibration and testing methods of their optical modules. These methods usually include laser-based systems which allow to check the telescope responses to the light and for real-time monitoring of the optical parameters of water such as absorption and scattering lengths, which show seasonal changes in natural reservoirs of water. We will present a testing method of a laser calibration system and a set of dedicated tools developed for Baikal- GVD, which includes a specially designed and built, compact, portable, and reconfigurable scanning station. This station is adapted to perform fast quality tests of the underwater laser sets just before their deployment in the telescope structure, even on ice, without darkroom. The testing procedure includes the energy stability test of the laser device, 3D scan of the light emission from the diffuser and attenuation test of the optical elements of the laser calibration system. The test bench consists primarily of an automatic mechanical scanner with a movable Si detector, beam splitter with a reference Si detector and, optionally, Q-switched diode-pumped solid-state laser used for laboratory scans of the diffusers. The presented test bench enables a three-dimensional scan of the light emission from diffusers, which are designed to obtain the isotropic distribution of photons around the point of emission. The results of the measurement can be easily shown on a 3D plot immediately after the test and may be also implemented to a dedicated program simulating photons propagation in water, which allows to check the quality of the diffuser in the scale of the Baikal-GVD telescope geometry.

astro-ph.IM↗

arXiv2021

The Baikal-GVD neutrino telescope: search for high-energy cascades

Baikal-GVD is a neutrino telescope currently under construction in Lake Baikal. GVD is formed by multi-meganton subarrays (clusters). The design of Baikal-GVD allows one to search for astrophysical neutrinos already at early phases of the array construction. We present here preliminary results of a search for high-energy neutrinos with GVD in 2019-2020.

astro-ph.HE↗

arXiv2021

An efficient hit finding algorithm for Baikal-GVD muon reconstruction

The Baikal-GVD is a large scale neutrino telescope being constructed in Lake Baikal. The majority of signal detected by the telescope are noise hits, caused primarily by the luminescence of the Baikal water. Separating noise hits from the hits produced by Cherenkov light emitted from the muon track is a challenging part of the muon event reconstruction. We present an algorithm that utilizes a known directional hit causality criterion to contruct a graph of hits and then use a clique-based technique to select the subset of signal hits.The algorithm was tested on realistic detector Monte-Carlo simulation for a wide range of muon energies and has proved to select a pure sample of PMT hits from Cherenkov photons while retaining above 90\% of original signal.

astro-ph.IM↗

arXiv2021

Positioning system for Baikal-GVD

Baikal-GVD is a kilometer scale neutrino telescope currently under construction in Lake Baikal. Due to water currents in Lake Baikal, individual photomultiplier housings are mobile and can drift away from their initial position. In order to accurately determine the coordinates of the photomultipliers, the telescope is equipped with an acoustic positioning system. The system consists of a network of acoustic modems, installed along the telescope strings and uses acoustic trilateration to determine the coordinates of individual modems. This contribution discusses the current state of the positioning in Baikal-GVD, including the recent upgrade to the acoustic modem polling algorithm.

astro-ph.IM↗

arXiv2021

Development of the Double Cascade Reconstruction Techniques in the Baikal-GVD Neutrino Telescope

The Baikal-GVD is a neutrino telescope under construction in Lake Baikal. The main goal of the Baikal-GVD is to observe neutrinos via detecting the Cherenkov radiation of the secondary charged particles originating in the interactions of neutrinos. In 2021, the installation works concluded with 2304 optical modules installed in the lake resulting in effective volume approximately 0.4 km$^{3}$. In this paper, the first steps in the development of double cascade reconstruction techniques are presented.

astro-ph.IM↗

arXiv2021

Multi-messenger and real-time astrophysics with the Baikal-GVD telescope

The Baikal-GVD deep underwater neutrino experiment participates in the international multi-messenger program on discovering the astrophysical sources of high energy fluxes of cosmic particles, while being at the stage of deployment with a gradual increase of its effective volume to the scale of a cubic kilometer. In April 2021 the effective volume of the detector has been reached 0.4 km3 for cascade events with energy above 100 TeV generated by neutrino interactions in Lake Baikal. The alarm system in real-time monitoring of the celestial sphere was launched at the beginning of 2021, that allows to form the alerts of two ranks like "muon neutrino" and "VHE cascade". Recent results of fast follow-up searches for coincidences of Baikal-GVD high energy cascades with ANTARES/TAToO high energy neutrino alerts and IceCube GCN messages will be presented, as well as preliminary results of searches for high energy neutrinos in coincidence with the magnetar SGR 1935+2154 activity in period of radio and gamma burst in 2020.

astro-ph.HE↗

arXiv2021

Data Quality Monitoring system of the Baikal-GVD experiment

The main purpose of the Baikal-GVD Data Quality Monitoring (DQM) system is to monitor the status of the detector and collected data. The system estimates quality of the recorded signals and performs the data validation. The DQM system is integrated with the Baikal-GVD's unified software framework ("BARS") and operates in quasi-online manner. This allows us to react promptly and effectively to the changes in the telescope conditions.

astro-ph.IM↗

arXiv2021

Methods for the suppression of background cascades produced along atmospheric muon tracks in the Baikal-GVD

The Baikal-GVD (Gigaton Volume Detector) is a km$^{3}$- scale neutrino telescope located in Lake Baikal. Currently (year 2021) the Baikal-GVD is composed of 2304 optical modules divided to 8 independent detection units, called clusters. Specific neutrino interactions can cause Cherenkov light topology, referred to as a cascade. However, cascade-like events originate from discrete stochastic energy losses along muon tracks. These cascades produce the most abundant background in searching for high-energy neutrino cascade events. Several methods have been developed, optimized, and tested to suppress background cascades.

astro-ph.IM↗

arXiv2021

Proposal for fiber optic data acquisition system for Baikal-GVD

The first stage of the construction of the deep underwater neutrino telescope Baikal-GVD is planned to be completed in 2024. The second stage of the detector deployment is planned to be carried out using a data acquisition system based on fibre optic technologies, which will allow for increased data throughput and more flexible trigger conditions. A dedicated test facility has been built and deployed at the Baikal-GVD site to test the new technological solutions. We present the principles of operation and results of tests of the new data acquisition system.

astro-ph.IM↗

arXiv2021

Automatic data processing for Baikal-GVD neutrino observatory

Baikal-GVD is a gigaton-scale neutrino observatory under construction in Lake Baikal. It currently produces about 100 GB of data every day. For their automatic processing, the Baikal Analysis and Reconstruction software (BARS) was developed. At the moment, it includes such stages as hit extraction from PMT waveforms, assembling events from raw data, assigning timestamps to events, determining the position of the optical modules using an acoustic positioning system, data quality monitoring, muon track and cascade reconstruction, as well as the alert signal generation. These stages are implemented as C++ programs which are executed sequentially one after another and can be represented as a directed acyclic graph. The most resource-consuming programs run in parallel to speed up processing. A separate Python package based on the luigi package is responsible for program execution control. Additional information such as the program execution status and run metadata are saved into a central database and then displayed on the dashboard. Results can be obtained several hours after the run completion.

astro-ph.IM↗

arXiv2021

The Baikal-GVD neutrino telescope as an instrument for studying Baikal water luminescence

We present data on the Baikal water luminescence collected with the Baikal-GVD neutrino telescope. This three-dimensional array of photo-sensors allows the observation of time and spatial variations of the ambient light field. We report on annual increase of luminescence activity in years 2018-2020. We observed a unique event of a highly luminescent layer propagating upwards with a maximum speed of 28 m/day for the first time.

hep-ph↗

arXiv2018

Cosmic Ray Extremely Distributed Observatory: a global network of detectors to probe contemporary physics mysteries

In the past few years, cosmic-rays beyond the GZK cut-off ($E > 5 \times 10^{19}$ eV) have been detected by leading collaborations such as Pierre Auger Observatory. Such observations raise many questions as to how such energies can be reached and what source can possibly produce them. Although at lower energies, mechanisms such as Fermi acceleration in supernovae front shocks seem to be favored, top-down scenarios have been proposed to explain the existence of ultra-high energy cosmic-rays: the decay of super-massive long-lived particles produced in the early Universe may yield to a flux of ultra-high energy photons. Such photons might be presently generating so called super-preshowers, an extended cosmic-ray shower with a spatial distribution that can be as wide as the Earth diameter. The Cosmic Ray Extremely Distributed Observatory (CREDO) mission is to find such events by means of a network of detectors spread around the globe. CREDO's strategy is to connect existing detectors and create a worldwide network of cosmic-ray observatories. Moreover, citizen-science constitutes an important pillar of our approach. By helping our algorithms to recognize detection patterns and by using smartphones as individual cosmic-ray detectors, non-scientists can participate in scientific discoveries and help unravel some of the deepest mysteries in physics.

astro-ph.IM↗