arXiv subjects

W. Peng

Publications and source records attributed to W. Peng.

11 recordsLinked to original sources

arXiv2026

Calibration and Performance of Germanium High Voltage Detectors for SuperCDMS SNOLAB

As SuperCDMS SNOLAB is getting ready to search for low mass dark matter particles, using cryogenic Ge and Si detectors, a set of six of the new SuperCDMS High Voltage (HV) detectors (four Ge and two Si) were tested in the Cryogenic Underground TEst facility (CUTE) at SNOLAB. This provided the first opportunity to gain experience with this new detector type and assess their performance thoroughly under low background conditions. Here we describe the SuperCDMS HV detector concept and discuss some of the newly developed analysis methods and approaches. Focusing on the Ge detectors, we investigate the detector performance under voltage bias (up to 90 V), exercise the low energy (keV to sub-keV range) calibration based on the electron capture peaks generated by the decay of $^{71}$Ge, assess the detector resolution, and demonstrate the unexpected (and encouraging) ability of these detectors to also measure high energy interactions in the hundreds of keV range with good resolution (better than 3% at 356 keV).

physics.ins-det↗

arXiv2025

Search for low-mass electron-recoil dark matter using a single-charge sensitive SuperCDMS-HVeV Detector

We present constraints on low-mass dark matter electron scattering and absorption interactions using a SuperCDMS high-voltage eV-resolution (HVeV) detector. Data were taken underground in the NEXUS facility located at Fermilab with an overburden of 225 meters of water equivalent. The experiment benefits from the minimizing of luminescence from the printed circuit boards in the detector holder used in all previous HVeV studies. A blind analysis of $6.1\,\mathrm{g\cdot days}$ of exposure produces exclusion limits for dark matter-electron scattering cross sections for masses as low as $1\,\mathrm{MeV}/c^2$, as well as on the photon-dark photon mixing parameter and the coupling constant between axionlike particles and electrons for particles with masses $>1.2\,\mathrm{eV}/c^2$ probed via absorption processes.

hep-ex↗

arXiv2025

Multi-channel, multi-template event reconstruction for SuperCDMS data using machine learning

SuperCDMS SNOLAB uses kilogram-scale germanium and silicon detectors to search for dark matter. Each detector has Transition Edge Sensors (TESs) patterned on the top and bottom faces of a large crystal substrate, with the TESs electrically grouped into six phonon readout channels per face. Noise correlations are expected among a detector's readout channels, in part because the channels and their readout electronics are located in close proximity to one another. Moreover, owing to the large size of the detectors, energy deposits can produce vastly different phonon propagation patterns depending on their location in the substrate, resulting in a strong position dependence in the readout-channel pulse shapes. Both of these effects can degrade the energy resolution and consequently diminish the dark matter search sensitivity of the experiment if not accounted for properly. We present a new algorithm for pulse reconstruction, mathematically formulated to take into account correlated noise and pulse shape variations. This new algorithm fits N readout channels with a superposition of M pulse templates simultaneously - hence termed the N$\times$M filter. We describe a method to derive the pulse templates using principal component analysis (PCA) and to extract energy and position information using a gradient boosted decision tree (GBDT). We show that these new N$\times$M and GBDT analysis tools can reduce the impact from correlated noise sources while improving the reconstructed energy resolution for simulated mono-energetic events by more than a factor of three and for the 71Ge K-shell electron-capture peak recoils measured in a previous version of SuperCDMS called CDMSlite to $<$ 50 eV from the previously published value of $\sim$100 eV. These results lay the groundwork for position reconstruction in SuperCDMS with the N$\times$M outputs.

physics.ins-det↗

arXiv2025

Low-Energy Calibration of SuperCDMS HVeV Cryogenic Silicon Calorimeters Using Compton Steps

Cryogenic calorimeters for low-mass dark matter searches have achieved sub-eV energy resolutions, driving advances in both low-energy calibration techniques and our understanding of detector physics. The energy deposition spectrum of gamma rays scattering off target materials exhibits step-like features, known as Compton steps, near the binding energies of atomic electrons. We demonstrate a successful use of Compton steps for sub-keV calibration of cryogenic silicon calorimeters, utilizing four SuperCDMS High-Voltage eV-resolution (HVeV) detectors operated with 0 V bias across the crystal. This new calibration at 0 V is compared with the established high-voltage calibration using optical photons. The comparison indicates that the detector response at 0 V is about 30% weaker than expected, highlighting challenges in detector response modeling for low-mass dark matter searches.

physics.ins-det↗

arXiv2024

Light Dark Matter Constraints from SuperCDMS HVeV Detectors Operated Underground with an Anticoincidence Event Selection

This article presents constraints on dark-matter-electron interactions obtained from the first underground data-taking campaign with multiple SuperCDMS HVeV detectors operated in the same housing. An exposure of 7.63 g-days is used to set upper limits on the dark-matter-electron scattering cross section for dark matter masses between 0.5 and 1000 MeV/$c^2$, as well as upper limits on dark photon kinetic mixing and axion-like particle axioelectric coupling for masses between 1.2 and 23.3 eV/$c^2$. Compared to an earlier HVeV search, sensitivity was improved as a result of an increased overburden of 225 meters of water equivalent, an anticoincidence event selection, and better pile-up rejection. In the case of dark-matter-electron scattering via a heavy mediator, an improvement by up to a factor of 25 in cross-section sensitivity was achieved.

hep-ex↗

arXiv2020

Large response of charge stripes to uniaxial stress in $\textrm{La}_{1.475}\textrm{Nd}_{0.4}\textrm{Sr}_{0.125}\textrm{Cu}\textrm{O}_{4}$

The La-based '214' cuprates host several symmetry breaking phases including superconductivity, charge and spin order in the form of stripes, and a structural othorhombic-to-tetragonal phase transition. Therefore, these materials are an ideal system to study the effects of uniaxial stress onto the various correlations that pervade the cuprate phase diagram. We report resonant x-ray scattering experiments on $\textrm{La}_{1.475}\textrm{Nd}_{0.4}\textrm{Sr}_{0.125}\textrm{Cu}\textrm{O}_{4}$ (LNSCO-125) that reveal a significant response of charge stripes to uniaxial tensile-stress of $\sim$ 0.1 GPa. These effects include a reduction of the onset temperature of stripes by $\sim$ 50 K, a 29 K reduction of the low-temperature orthorhombic-to-tetragonal transition, competition between charge order and superconductivity, and a preference for stripes to form along the direction of applied stress. Altogether, we observe a dramatic response of the electronic properties of LNSCO-125 to a modest amount of uniaxial stress.

cond-mat.str-el↗

arXiv2020

Object classification in analytical chemistry via data-driven discovery of partial differential equations

Glycans are one of the most widely investigated biomolecules, due to their roles in numerous vital biological processes. This involvement makes it critical to understand their structure-function relationships. Few system-independent, LC-MS/MS (Liquid chromatography tandem mass spectrometry) based studies have been developed with this particular goal, however. When studied, the employed methods generally rely on normalized retention times as well as m/z - mass to charge ratio of an ion values. Due to these limitations, there is need for quantitative characterization methods which can be used independently of m/z values, thus utilizing only normalized retention times. As such, the primary goal of this article is to construct an LC-MS/MS based classification of the permethylated glycans derived from standard glycoproteins and human blood serum, using a Glucose Unit Index (GUI) as the reference frame in the space of compound parameters. For the reference frame we develop a closed-form analytic formula, which is obtained from the Green's function of a relevant convection-diffusion-absorption equation used to model composite material transport. The aforementioned equation is derived from an Einstein-Brownian motion paradigm, which provides a physical interpretation of the time-dependence at the point of observation for molecular transport in the experiment. The necessary coefficients are determined via a data-driven learning procedure. The methodology is presented in an abstract manner which allows for immediate application to related physical and chemical processes. Results employing the proposed classification method are validated via comparison with experimental mass spectrometer data.

physics.comp-ph↗

arXiv2010

Temperature-dependent Raman scattering of KTa1-xNbxO3 thin films

We report a Raman scattering investigation of KTa1-xNbxO3 (x = 0.35, 0.5) thin films deposited on MgO and LaAlO3 as a function of temperature. The observed phase sequence in the range from 90 K to 720 K is similar to the structural phase transitions of the end-member material KNbO3. Although similar in the phase sequence, the actual temperatures observed for phase transition temperatures are significantly different from those observed in the literature for bulk samples. Namely, the tetragonal (ferroelectric) to cubic (paraelectric) phase transition is up to 50 K higher in the films when compared to bulk samples. This enhanced ferroelectricity is attributed to biaxial strain in the investigated thin films.

cond-mat.mtrl-sci↗

arXiv2009

Epitaxial growth and structural characterization of Pb(Fe1/2Nb1/2)O3 thin films

We have grown lead iron niobate thin films with composition Pb(Fe1/2Nb1/2)O3 (PFN) on (0 0 1) SrTiO3 substrates by pulsed laser deposition. The influence of the deposition conditions on the phase purity was studied. Due to similar thermodynamic stability spaces, a pyrochlore phase often coexists with the PFN perovskite phase. By optimizing the kinetic parameters, we succeeded in identifying a deposition window which resulted in epitaxial perovskite-phase PFN thin films with no identifiable trace of impurity phases appearing in the X-ray diffractograms. PFN films having thicknesses between 20 and 200 nm were smooth and epitaxially oriented with the substrate and as demonstrated by RHEED streaks which were aligned with the substrate axes. X-ray diffraction showed that the films were completely c-axis oriented and of excellent crystalline quality with low mosaicity (X-ray rocking curve FWHM<0.09). The surface roughness of thin films was also investigated by atomic force microscopy. The root-mean-square roughness varies between 0.9 nm for 50-nm-thick films to 16 nm for 100-nm-thick films. We also observe a correlation between grain size, surface roughness and film thickness.

cond-mat.mtrl-sci↗

arXiv2009

Spin-lattice coupling in multiferroic Pb(Fe1/2Nb1/2)O3 thin films

We have made magnetization and x-ray diffraction measurements on an epitaxial Pb(Fe1/2Nb1/2)O3 200 nm film. From the temperature dependence of the out-of-plane lattice parameter we can assign a Burns' temperature at Td ~ 640 K, a temperature at T* ~ 510 K, related to the appearance of static polar nanoregions, and an anomaly occurring at 200 K. The latter is precisely the Néel temperature TN determined from magnetization and points to spin-lattice coupling at TN ~ 200 K. We also observe "weak ferromagnetism" up to 300K and propose superantiferromagnetic clusters as a plausible scenario to explain this hysteresis above TN.

cond-mat.mtrl-sci↗

arXiv2004

Large LFMR observed in twinned La2/3Ca1/3MnO3 thin films epitaxially grown on YSZ-buffered SOI substrates

La2/3Ca1/3MnO3 thin films have been grown on yttria-stabilized zirconia (YSZ) buffered silicon-on-insulator (SOI) substrate by the pulsed laser deposition technique. While full cube-on-cube epitaxy was achieved for the YSZ layer, the top manganite layer was multi-domain-oriented, with a coexistence of cube-on-cube and cube-on-diagonal epitaxy. Due to a combined influence from the magnetocrystalline anisotropy and the magnetoelastic anisotropy, in zero field the local spin orientation varies across the twin boundaries. As a result, a quite large low-field magnetoresistance (LFMR) based on spin-dependent tunnelling was observed. The film shows a resistance change of ~20% in a magnetic field <1000 Oe at 50 K, which is promising for real applications.

cond-mat.str-el↗