Searcharxiv⌕ Search

arXiv subjects

Wadhah Zai El Amri

Publications and source records attributed to Wadhah Zai El Amri.

7 recordsLinked to original sources
arXiv2026

Do Robots Really Need Anthropomorphic Hands? A Comparison of Human and Robotic Hands

Human manipulation skills represent a pinnacle of voluntary motor functions, requiring the coordination of many degrees of freedom and the processing of high-dimensional sensor input to achieve remarkable dexterity. Thus, this study investigates whether the human hand, with its associated biomechanical properties, sensors, and control mechanisms, is an ideal that should be strived for in robotics. Do robots need anthropomorphic hands? First, characteristics of the human hand in terms of biomechanics and perception are extracted to compare them with currently commercially available robotic hands. From this comparison, research questions are derived that connect manipulation system complexity to skill repertoire size and dexterity. These questions are addressed through a systematic literature review, analyzing the manipulation capabilities demonstrated in 125 papers published between 2019 and 2025. Although complex five-fingered hands are often considered the ultimate goal for robotic manipulators, they are not necessary for all tasks. Findings indicate that in-hand manipulation does not benefit from anthropomorphic hand design, as simpler mechanisms are sufficient; however, mechanism complexity correlates with the breadth of manipulation tasks a hand can perform. Sensor integration and intelligent manipulation strategies remain underexplored, which may be due to a misalignment with hand design: instead of replicating the number of fingers and degrees of freedom, focusing on robustness and softness would allow more intelligent control and learning to exploit environmental contacts and integrate more sensors. Finally, the article argues for standardized evaluation criteria to enable the systematic comparison of hand designs and manipulation systems.

cs.RO↗
arXiv2026

SPLIT: Separating Physical-Contact via Latent Arithmetic in Image-Based Tactile Sensors

Training machine learning models for robotic tactile sensing requires vast amounts of data, yet obtaining realistic interaction data remains a challenge due to physical complexity and variability. Simulating tactile sensors is thus a crucial step in accelerating progress. This paper presents SPLIT, a novel method for simulating image-based tactile sensors, with a primary focus on the DIGIT sensor. Central to our approach is a latent space arithmetic strategy that explicitly disentangles contact geometry from sensor-specific optical properties. Unlike methods that require recalibration for every new unit, this disentanglement allows SPLIT to adapt to diverse DIGIT backgrounds and even transfer data to distinct sensors like the GelSight R1.5 without full model retraining. Beyond this adaptability, our approach achieves faster inference speeds than existing alternatives. Furthermore, we provide a calibrated finite element method (FEM) soft-body mesh simulation with variable resolution, offering a tunable trade-off between speed and fidelity. Additionally, our algorithm supports bidirectional simulation, allowing for both the generation of realistic images from deformation meshes and the reconstruction of meshes from tactile images. This versatility makes SPLIT a valuable tool for accelerating progress in robotic tactile sensing research.

cs.RO↗
arXiv2026

Vibro-Sense: Robust Vibration-based Impulse Response Localization and Trajectory Tracking for Robotic Hands

Rich contact perception is crucial for robotic manipulation, yet traditional tactile skins remain expensive and complex to integrate. This paper presents a scalable alternative: high-accuracy whole-body touch localization via vibro-acoustic sensing. By equipping a robotic hand with seven low-cost piezoelectric microphones and leveraging an Audio Spectrogram Transformer, we decode the vibrational signatures generated during physical interaction. Extensive evaluation across stationary and dynamic tasks reveals a localization error of under 5 mm in static conditions. Furthermore, our analysis highlights the distinct influence of material properties: stiff materials (e.g., metal) excel in impulse response localization due to sharp, high-bandwidth responses, whereas textured materials (e.g., wood) provide superior friction-based features for trajectory tracking. The system demonstrates robustness to the robot's own motion, maintaining effective tracking even during active operation. Our primary contribution is demonstrating that complex physical contact dynamics can be effectively decoded from simple vibrational signals, offering a viable pathway to widespread, affordable contact perception in robotics. To accelerate research, we provide our full datasets, models, and experimental setups as open-source resources.

cs.RO↗
arXiv2025

ACROSS: A Deformation-Based Cross-Modal Representation for Robotic Tactile Perception

Tactile perception is essential for human interaction with the environment and is becoming increasingly crucial in robotics. Tactile sensors like the BioTac mimic human fingertips and provide detailed interaction data. Despite its utility in applications like slip detection and object identification, this sensor is now deprecated, making many valuable datasets obsolete. However, recreating similar datasets with newer sensor technologies is both tedious and time-consuming. Therefore, adapting these existing datasets for use with new setups and modalities is crucial. In response, we introduce ACROSS, a novel framework for translating data between tactile sensors by exploiting sensor deformation information. We demonstrate the approach by translating BioTac signals into the DIGIT sensor. Our framework consists of first converting the input signals into 3D deformation meshes. We then transition from the 3D deformation mesh of one sensor to the mesh of another, and finally convert the generated 3D deformation mesh into the corresponding output space. We demonstrate our approach to the most challenging problem of going from a low-dimensional tactile representation to a high-dimensional one. In particular, we transfer the tactile signals of a BioTac sensor to DIGIT tactile images. Our approach enables the continued use of valuable datasets and data exchange between groups with different setups.

cs.RO↗
arXiv2024

Optimizing BioTac Simulation for Realistic Tactile Perception

Tactile sensing presents a promising opportunity for enhancing the interaction capabilities of today's robots. BioTac is a commonly used tactile sensor that enables robots to perceive and respond to physical tactile stimuli. However, the sensor's non-linearity poses challenges in simulating its behavior. In this paper, we first investigate a BioTac simulation that uses temperature, force, and contact point positions to predict the sensor outputs. We show that training with BioTac temperature readings does not yield accurate sensor output predictions during deployment. Consequently, we tested three alternative models, i.e., an XGBoost regressor, a neural network, and a transformer encoder. We train these models without temperature readings and provide a detailed investigation of the window size of the input vectors. We demonstrate that we achieve statistically significant improvements over the baseline network. Furthermore, our results reveal that the XGBoost regressor and transformer outperform traditional feed-forward neural networks in this task. We make all our code and results available online on https://github.com/wzaielamri/Optimizing_BioTac_Simulation.

cs.RO↗
arXiv2024

Transferring Tactile Data Across Sensors

Tactile perception is essential for human interaction with the environment and is becoming increasingly crucial in robotics. Tactile sensors like the BioTac mimic human fingertips and provide detailed interaction data. Despite its utility in applications like slip detection and object identification, this sensor is now deprecated, making many existing datasets obsolete. This article introduces a novel method for translating data between tactile sensors by exploiting sensor deformation information rather than output signals. We demonstrate the approach by translating BioTac signals into the DIGIT sensor. Our framework consists of three steps: first, converting signal data into corresponding 3D deformation meshes; second, translating these 3D deformation meshes from one sensor to another; and third, generating output images using the converted meshes. Our approach enables the continued use of valuable datasets.

cs.RO↗
arXiv2023

A Review of the Role of Causality in Developing Trustworthy AI Systems

State-of-the-art AI models largely lack an understanding of the cause-effect relationship that governs human understanding of the real world. Consequently, these models do not generalize to unseen data, often produce unfair results, and are difficult to interpret. This has led to efforts to improve the trustworthiness aspects of AI models. Recently, causal modeling and inference methods have emerged as powerful tools. This review aims to provide the reader with an overview of causal methods that have been developed to improve the trustworthiness of AI models. We hope that our contribution will motivate future research on causality-based solutions for trustworthy AI.

cs.AI↗