arXiv subjects

Wageesh Mishra

Publications and source records attributed to Wageesh Mishra.

At least 19 recordsLinked to original sources

arXiv2026

Coordinated Coronagraphic Observations from Proba-3 and Aditya-L1: Investigating CME Energetics in the Inner Corona

Constraining the plasma properties and energetics of coronal mass ejections (CMEs) in the inner corona is essential for understanding their early evolution, yet remains challenging because of limited observations. We investigate the mass and density evolution, and energy partitioning of two CMEs observed on 2025 September 14 and 16, and assess the potential of coordinated Proba-3/ASPIICS and Aditya-L1/VELC observations to constrain CME energetics in the low corona. We present the first coordinated observations of CMEs obtained simultaneously by Proba-3/ASPIICS and Aditya-L1/VELC. Using ASPIICS white-light observations, we estimate the CME mass, volume, number density, and the evolution of kinetic, thermal, and magnetic energies. Magnetic energies are estimated from observed CME properties using observationally constrained, physically motivated assumptions. Simultaneous VELC Fe XIV 5303 Angstorm observations provide independent estimates of the emission measure, electron number density, thermal energy, and CME lateral extent. The two events exhibit markedly different energy partitioning in the low corona. For the 14 September CME, the kinetic and magnetic energies are comparable, while the thermal energy remains nearly two orders of magnitude smaller, indicating limited plasma heating. In contrast, the 16 September CME exhibits a substantial thermal-energy enhancement, with thermal energy eventually becoming comparable to kinetic energy. For both CMEs, the estimated magnetic energy remains comparable to or exceeds the kinetic energy over the observed height. Our results demonstrate the scientific potential of synergetic ASPIICS and VELC observations for constraining CME mass, density, and energetics in the inner corona, providing new observational constraints on the early evolution of CMEs.

astro-ph.SR↗

arXiv2026

Comparative 3D Asymmetric Expansion and Angular Widths Evolution of Fast and Slow Coronal Mass Ejections

The radial and lateral dimensions of coronal mass ejections (CMEs) influence their duration and probability of encounter at Earth. These properties are linked to the expansion speed of CMEs in different radial and lateral directions; however, most earlier studies modeled CME evolution using a projected full ice-cream cone geometry, which does not distinguish between radial and lateral expansion. Our study investigates the asymmetric expansion (relative radial and lateral components) and kinematics of seven fast and seven slow CMEs within coronagraphic heights, using the Graduated Cylindrical Shell model. Our study confirms that CMEs expand asymmetrically, with lateral expansion exceeding radial expansion in both CME populations. This asymmetry limits the accuracy of the full ice-cream cone model. For both fast and slow CMEs, higher leading edge speeds are associated with higher expansion speeds. At a height of 10 Rs, slow CMEs with larger expansion speeds (lateral and radial) have larger angular widths (face-on and edge-on), whereas fast CMEs exhibit a negative correlation between lateral expansion speed and face-on angular width. We find that the expansion and propagation speeds of slow CMEs exhibit a two-phase evolution, whereas those of fast CMEs display more diverse trends. Overall, this study suggests that fast and slow CMEs evolve differently and should not be treated as a single population in statistical estimates of their physical parameters. Our study highlights the importance of estimating CME angular widths and expansion speeds along different directions, and beyond standard coronagraphic heights, to capture their complete physical evolution.

astro-ph.SR↗

arXiv2026

Three-Phase Evolution of Aspect Ratio in Fast and Slow CMEs from the Sun to 1 AU

Coronal mass ejections (CMEs) undergo significant geometric evolution as they propagate from the Sun to 1 AU, influencing their radial size, expansion, and space weather impact. We investigate the evolution of CME aspect ratio and expansion dynamics for four fast and four slow Earth-directed CMEs. Using multipoint coronagraphic observations with the Graduated Cylindrical Shell (GCS) model and corrected in situ measurements of associated magnetic clouds (MCs) at 1 AU, we track the evolution of aspect ratio from the low-middle corona to interplanetary space. We find that aspect ratio does not remain constant but exhibits a systematic three-phase evolution: a rise phase in the low-middle corona ($\lesssim10$-$15\,R_{\odot}$), a saturation phase at intermediate heights, and then a decline phase in the interplanetary space. The ratio of radial expansion speed to leading-edge speed ($V_{\rm exp}/V_{\rm LE}$) decreases substantially from the corona to 1 AU, indicating a reduction in radial expansion efficiency during interplanetary propagation. The consistent evolution of aspect ratio and $V_{\rm exp}/V_{\rm LE}$ suggests a transition from magnetically dominated expansion in the corona to a regime increasingly controlled by the heliospheric environment. We note that fast CMEs show stronger early expansion and evolve into larger, more radially extended structures, whereas slow CMEs exhibit a more gradual rise and a steeper decline. These results demonstrate that CME geometry evolves significantly during propagation and highlight the need to incorporate aspect ratio evolution in models to improve predictions of CME size, arrival time, and geoeffectiveness.

astro-ph.SR↗

arXiv2026

Validating a Non-conventional Method for Expansion of Coronal Mass Ejections (CMEs) and Investigating the Evolution of a CME Substructures Using Solar Orbiter and Wind Observations

We present a validation of our recently proposed non-conventional method, Constant Acceleration Accounted Perspective (CAAP), for estimating the instantaneous expansion speed of coronal mass ejection (CMEs), even when only single-point in situ observations are available. This validation is enabled by the radial alignment of SolO and Wind spacecraft (0.13 AU radial and 2.3 deg angular separation), providing simultaneous observations of the center (at Wind) and trailing edge (at SolO) of a CME associated magnetic cloud (MC) during 3-5 November 2021, allowing a direct measurement of its instantaneous expansion speed. These measurements are compared with CAAP-derived instantaneous expansion speed estimates at both spacecraft. The favorable spacecraft configuration also enables tracking the temporal evolution of CME substructures, including the shock, sheath, and MC. A discrepancy is noted between the low-inclination MC axis estimated from minimum variance analysis (MVA) and the highly inclined ENW-type MC axis suggested by visual inspection of in situ measurements. We also observe an apparent increase in the magnetic flux within the MC from SolO to Wind, indicating a noticeable deviation from magnetic flux conservation. During the CME's propagation from SolO to Wind, the shock becomes unexpectedly stronger at Wind, while the sheath thickness remains nearly the same, likely due to MC acceleration from back compression by a high-speed stream and ambient solar wind variability. Our results demonstrate the applicability of the CAAP method and the importance of accounting for temporal evolution in CME substructures for space weather studies.

astro-ph.SR↗

arXiv2025

Thermal properties of interplanetary coronal mass ejections at 1 AU and their connection to geoeffectiveness across solar cycles 23-25

Interplanetary coronal mass ejections (ICMEs) are major drivers of heliospheric variability and can produce prolonged disturbances near Earth. Understanding their thermodynamic evolution is crucial for assessing their heat budget and exploring how thermal states relate to their plasma dynamics and geoeffectiveness. We conduct a comprehensive statistical analysis of magnetic ejecta (MEs) over Solar Cycles 23, 24, and the ascending phase of 25. Leveraging a polytropic framework, we characterized the thermal state of ME based on the event-wise median proton polytropic index (Gamma_p) from in-situ measurements at 1 AU. We find that MEs are thermodynamically active and rarely evolve adiabatically or isothermally. Notably, a significant fraction (45%) of MEs exhibit a heating state. Heating MEs dominate near solar maxima and exhibit strong solar-cycle modulation in Gamma_p, proton temperature, and expansion speed, indicating active in-transit heating processes. Whereas, Cooling MEs show a nearly constant Gamma_p = 2 across cycles, suggesting enhanced cooling beyond adiabatic expectations and possible thermal energy retention from eruption to 1 AU. Notably, the median Gamma_p value increases from 1.49 (SC23) to 1.88 (SC24), indicating a shift to cooling-dominated states over successive cycles. High-impact ICMEs, predominantly Heating MEs (Gamma_p = 0.59), often manifest as magnetic clouds with enhanced magnetic fields, low plasma beta, pronounced sheath compression, elevated expansion, and post-ICME high-speed flows, making them the most geoeffective drivers of strong geomagnetic storms. These results establish Gamma_p as a useful diagnostic of ICME thermal states, though meaningful assessment of geoeffectiveness requires combined consideration of thermal, plasma, and magnetic field properties.

astro-ph.SR↗

arXiv2025

Thermal and Turbulence Characteristics of Fast and Slow Coronal Mass Ejections at 1 AU

Understanding the thermal and turbulence properties of interplanetary coronal mass ejections (ICMEs) is essential for analyzing their evolution and interactions with the surrounding medium. This study explores these characteristics across different regions of two distinct ICMEs observed at 1 AU, utilizing in-situ measurements from the Wind spacecraft. The polytropic indices, Gamma_e for electrons and Gamma_p for protons) reveal significant deviations from adiabatic expansion, suggesting sustained heating mechanisms within the ICMEs even at 1AU. The effective polytropic index (Gamma_eff) of the magnetic ejecta (ME) in both ICME1 and ICME2 is found to be near-isothermal (Gamma_eff = 0.88 and 0.76), aligning with measurements near the Sun, highlighting consistent heating across heliospheric distances. Spectral analysis at the inertial scale reveals Kolmogorov-like turbulence in the fast ICME1's ME, while the ME of the slower ICME2 exhibits less developed turbulence with a shallower spectral index (alpha_B). The turbulence analysis in the dissipation scale indicates that the ME of slower ICME2 is less affected by the ambient medium than the faster ICME2. The MEs of both ICMEs show magnetic compressibility much smaller than unity (C_B < 1), suggesting dominant Alfvenic fluctuations in the MEs. Notably, the partial variance of increments (PVI) method identifies more intermittent structures, such as current sheets and reconnection sites, in the sheath and post-ICME regions. Higher PVI values correlate with regions of increased electron and proton temperature (for the sheath region), as well as higher C_B values, highlighting their role in local energy dissipation. These results underscore the importance of ongoing heating and turbulence processes in shaping the evolution of ICMEs.

astro-ph.SR↗

arXiv2025

Visible Emission Line Coronagraph (VELC) onboard ADITYA-L1

Aditya-L1, India's first dedicated mission to study the Sun and its atmosphere from the Sun-Earth Lagrangian L1 location was successfully launched on 2023 September 2. It carries seven payloads. The Visible Emission Line Coronagraph (VELC) is a major payload on Aditya-L1. VELC is designed to carry out imaging and spectroscopic observations (the latter in three emission lines of the corona), simultaneously. Images of the solar corona in the continuum at 5000 A, with a field of view (FoV) from 1.05 Ro to 3 Ro can be obtained at variable intervals depending on the data volume that can be downloaded. Spectroscopic observations of the solar corona in three emission lines, namely 5303 A Fexiv, 7892 A Fexi, and 10747 A Fexiii are possible simultaneously, with different exposure times and cadence. Four slits, each of width 50 um, separated by 3.75 mm help to simultaneously obtain spectra at four positions in the solar corona at all the aforementioned lines. A Linear Scan Mechanism (LSM) makes it possible to scan the solar corona up to +/-1.5 Ro. The instrument has the facility to carry out spectropolarimetric observations at 10747 A also in the FoV range 1.05 - 1.5 Ro. Various components of the instrument were tested interferometrically on the optical bench before installation. The individual components were aligned and performance of the payload was checked in the laboratory using a laser source and tungsten lamp. Wavelength calibration of the instrument was verified using Sun as a light source. All the detectors were calibrated for different parameters such as dark current and its variation with exposure time. Here, we discuss the various features of the VELC, alignment, calibration, performance, possible observations, initial data analysis and results of initial tests conducted in-orbit.

astro-ph.SR↗

arXiv2025

Proton heating estimates from near-Earth observations of coronal mass ejections in solar cycle 24

As solar coronal mass ejections (CMEs) propagate through the heliosphere, they expend energy in heating protons to compensate for the cooling that occurs due to expansion. CME propagation models usually treat energy dissipation implicitly via a polytropic index ($δ$). Here we calculate the power dissipation implied by a given $δ$ and compare it with the power available in the turbulent velocity fluctuations. We make this comparison using near-Earth {\em in-situ} observations of 27 of the most geoeffective CMEs ($D_{\rm st} < -75$ nT) in solar cycle 24. For $δ= 5/3$, the power in the turbulent velocity fluctuations is $\approx 54$\% smaller than what would be required to maintain the proton temperature at the observed values. If the power in the turbulent cascade is assumed to be fully expended in local proton heating, the most probable value for $δ$ is 1.35. Our results contribute to a better understanding of CME energetics, and thereby to improved CME propagation models and estimates of Earth arrival times.

astro-ph.SR↗

arXiv2025

Evolution of interacting coronal mass ejections driving the great geomagnetic storm on 10 May 2024

The arrival of a series of coronal mass ejections (CMEs) at the Earth resulted in a great geomagnetic storm on 10 May 2024, the strongest storm in the last two decades. We investigate the kinematic and thermal evolution of the successive CMEs to understand their interaction en route to Earth. We attempt to find the dynamics, thermodynamics, and magnetic field signatures of CME-CME interactions. Our focus is to compare the thermal state of CMEs near the Sun and in their post-interaction phase at 1 AU. The 3D kinematics of six identified Earth-directed CMEs were determined using the GCS model. The flux rope internal state (FRIS) model is implemented to estimate the CMEs' polytropic index and temperature evolution from their measured kinematics. The thermal states of the interacting CMEs are examined using in-situ at 1 AU. Our study determined the interaction heights of selected CMEs and confirmed their interaction that led to the formation of complex ejecta identified at 1 AU. The plasma, magnetic field, and thermal characteristics of magnetic ejecta (ME) within the complex ejecta and other substructures, such as interaction regions (IRs) within two ME and double flux rope-like structures within a single ME, show the possible signatures of CME-CME interaction in in-situ observations. The FRIS-model-derived thermal states for individual CMEs reveal their diverse thermal evolution near the Sun, with most CMEs transitioning to an isothermal state at 6-9 Rsun, except for CME4, which exhibits an adiabatic state due to a slower expansion rate. The complex ejecta at 1 AU shows a predominant heat-release state in electrons, while the ions show a bimodal distribution of thermal states. On comparing the characteristics of CMEs near the Sun and at 1 AU, we suggest that such one-to-one comparison is difficult due to CME-CME interactions significantly influencing their post-interaction characteristics.

astro-ph.SR↗

arXiv2025

Disparities in Magnetic Cloud Observations Between Two Spacecraft Having Small Radial and Angular Separations Near 1 AU

Studies for inferring the global characteristics of coronal mass ejections (CMEs) from its multipoint local in situ observations have been undertaken earlier, but there are limited studies utilizing measurements from multiple spacecraft with sufficiently small radial and angular separations. In the present study, we investigate a magnetic cloud (MC) region of a CME observed in situ during 2023 September 24-26, at STEREO-A and Wind spacecraft near 1 AU, which had radial and angular separations of 0.03 AU and 3.4 degrees, respectively. We examine the disparities in the estimates of the arrival times of CME substructures, the MC axis, and its orientation between the two spacecraft. We also propose an approach for identifying the MC axis's arrival and have compared it with the arrival of the size/time center to understand the non-isotropic compression of the MC along its angular extent. Using minimum variance analysis (MVA), we note that the orientation of the MC is slightly out-of-ecliptic at Wind but not at STEREO-A. We also compare the magnetic field parameters over the start to end of the MC at both spacecraft and note a significant non-coherency in the MC towards its trailing portion. Our analysis confirms that MC has a stronger rear side compression at STEREO-A than at Wind, with its trailing edge arriving later at Wind. Our study highlights substantial differences in CME characteristics even at mesoscales across the angular extent, and therefore, one needs to analyze several such cases to better understand the flux rope structure.

astro-ph.SR↗

arXiv2024

Deciphering the Evolution of Thermodynamic Properties and their Connection to the Global Kinematics of High-Speed Coronal Mass Ejections Using FRIS Model

Most earlier studies have been limited to estimating the kinematic evolution of coronal mass ejections (CMEs), and only limited efforts have been made to investigate their thermodynamic evolution. We focus on the interplay of the thermal properties of CMEs with their observed global kinematics. We implement the Flux rope Internal State (FRIS) model to estimate variations in the polytropic index, heating rate per unit mass, temperature, pressure, and various internal forces. The model incorporates inputs of 3D kinematics obtained from the Graduated Cylindrical Shell (GCS) model. In our study, we chose nine fast-speed CMEs from 2010 to 2012. Our investigation elucidates that the selected fast-speed CMEs show a heat-release phase at the beginning, followed by a heat-absorption phase with a near-isothermal state in their later propagation phase. The thermal state transition, from heat release to heat absorption, occurs at around 3($\pm$0.3) to 7($\pm$0.7) $R_\odot$ for different CMEs. We found that the CMEs with higher expansion speeds experience a less pronounced sharp temperature decrease before gaining a near-isothermal state. The differential emission measurement (DEM) analysis findings, using multi-wavelength observation from SDO/AIA, also show a heat release state of CMEs at lower coronal heights. We also find the dominant internal forces influencing CME radial expansion at varying distances from the Sun. Our study shows the need to characterize the internal thermodynamic properties of CMEs better in both observational and modeling studies, offering insights for refining assumptions of a constant value of the polytropic index during the evolution of CMEs.

astro-ph.SR↗

arXiv2024

Study of Evolution and Geo-effectiveness of CME-CME Interactions using MHD Simulations with SWASTi framework

The geo-effectiveness of Coronal Mass Ejections (CMEs) is a critical area of study in space weather, particularly in the lesser-explored domain of CME-CME interactions and their geomagnetic consequences. This study leverages the SWASTi framework to perform 3D MHD simulation of a range of CME-CME interaction scenarios within realistic solar wind conditions. The focus is on the dynamics of the initial magnetic flux, speed, density, and tilt of CMEs, and their individual and combined impacts on the disturbance storm time (Dst) index. Additionally, the kinematic, magnetic, and structural impacts on the leading CME, as well as the mixing of both CMEs, are analyzed. Time series in-situ studies are conducted through virtual spacecraft positioned along three different longitudes at 1 AU. Our findings reveal that CME-CME interactions are non-uniform along different longitudes due to the inhomogeneous ambient solar wind conditions. A significant increase in the momentum and kinetic energy of the leading CME is observed due to collisions with the trailing CME, along with the formation of reverse shocks in cases of strong interaction. These reverse shocks lead to complex wave patterns inside CME2, which can prolong the storm recovery phase. Furthermore, we observed that the minimum Dst value decreases with an increase in the initial density, tilt, and speed of the trailing CME.

astro-ph.SR↗

arXiv2024

Non-conventional Approach for Deriving the Radial Sizes of Coronal Mass Ejections at Different Instances: Discrepancies in the Estimates Between Remote and In Situ Observations

Understanding the evolution of radial sizes and instantaneous expansion speeds of coronal mass ejections (CMEs) is crucial for assessing their impact duration on Earth's environment. We introduce a non-conventional approach to derive the CME's radial sizes and expansion speeds at different instances during its passage over a single-point in situ spacecraft. We also estimate the CME's radial sizes and expansion speeds during its journey from the Sun to 1 AU using the 3D kinematics of different CME features, including the leading edge (LE), center, and trailing edge (TE). The continuous 3D kinematics of the CME is estimated by employing the GCS and SSSE reconstruction methods on multi-point observations from coronagraphs and heliospheric imagers combined with the drag-based model. We choose the 2010 April 3 CME as a suitable case for our study, promising a more accurate comparison of its remote and in situ observations. We show that the introduced non-conventional approach can provide better accuracy in estimating radial sizes and instantaneous expansion speeds of CMEs at different instances. We examine the aspect ratio of the CME, which influences its expansion behavior and shows the discrepancy between its value in the corona and interplanetary medium. Our study highlights significant inconsistencies in the arrival time, radial size, and expansion speed estimates obtained from remote and in situ observations. We advocate for future studies leveraging multi-spacecraft in situ observations and our non-conventional approach to analyze them to improve the comprehension of CME dynamics in the solar wind.

astro-ph.SR↗

arXiv2024

Low-Latitude Auroras: Insights from 23 April 2023 Solar Storm

In April 2023, low-latitude aurora observation by the all-sky camera at Hanle, Ladakh, India ($33^{\circ} {} N $ geographic latitude (GGLat)) was reported, which stimulated a lot of discussion among scientists as well as masses across the globe. The reported observation was intriguing as the solar storm that triggered this aurora was moderate and the first such observation from Indian region in the space-era. In this communication, we investigate such a unique modern-day observation of low-latitude auroral sighting occurring during the passage of sheath-region of Interplanetary-Coronal-Mass-Ejection, utilizing in situ multi-spacecraft particle measurements along with geomagnetic-field observations by ground and satellite-based magnetometers. Auroral observations at Hanle coincided with the intense substorm occurrences. It is unequivocally found that the aurora didnt reach India, rather the equatorward boundary of the aurora was beyond $ 50^{\circ} {}N $ GGLat. The multi-instrumental observations enabled us to estimate the altitude of the red auroral emissions accurately. The increased flux of low-energy electrons ($<$100 eV) precipitating at $\sim 54^{\circ}N$ GGLat causing red-light emissions at higher altitudes ($\sim$700-950 km) can be visible from Hanle. The observed low-latitude red aurora from India resulted from two factors: emissions at higher altitudes in the auroral oval and a slight expansion of the auroral oval towards the equator. The precipitating low-energy particles responsible for red auroral emissions mostly originate from the plasma sheet. These particles precipitate due to wave-particle interactions enhanced by strong compression of the magnetosphere during high solar wind pressure. This study using multi-point observations holds immense importance in providing a better understanding of low-latitude auroras.

physics.space-ph↗

arXiv2024

Distribution and Recovery Phase of Geomagnetic Storms During Solar Cycles 23 and 24

Coronal mass ejections (CMEs) and Stream Interaction Regions (SIRs) are the main drivers of intense geomagnetic storms. We study the distribution of geomagnetic storms associated with different drivers during solar cycles 23 and 24 (1996-2019). Although the annual occurrence rate of geomagnetic storms in both cycles tracks the sunspot cycle, the second peak in storm activity lags the second sunspot peak. SIRs contribute significantly to the second peak in storm numbers in both cycles, particularly for moderate to stronger-than-moderate storms. We note semiannual peaks in storm numbers much closer to equinoxes for moderate storms, and slightly shifted from equinoxes for intense and stronger-than-intense storms. We note a significant fraction of multiple-peak storms in both cycles due to isolated ICMEs/SIRs, while single-peak storms from multiple interacting drivers, suggesting a complex relationship between storm steps and their drivers. Our study focuses on investigating the recovery phases of geomagnetic storms and examining their dependencies on various storm parameters. Multiple-peak storms in both cycles have recovery phase duration strongly influenced by slow and fast decay phases with no correlation with the main phase buildup rate and Dst peak. However, the recovery phase in single-peak storms for both cycles depends to some extent on the main phase buildup rate and Dst peak, in addition to slow and fast decay phases. Future research should explore recovery phases of single and multiple-peak storms incorporating in-situ solar wind observations for a deeper understanding of storm evolution and decay processes.

astro-ph.SR↗

arXiv2023

SWASTi-CME: A physics-based model to study CME evolution and its interaction with Solar Wind

Coronal mass ejections (CMEs) are primary drivers of space weather and studying their evolution in the inner heliosphere is vital to prepare for a timely response. Solar wind streams, acting as background, influence their propagation in the heliosphere and associated geomagnetic storm activity. This study introduces SWASTi-CME, a newly developed MHD-based CME model integrated into the Space Weather Adaptive SimulaTion (SWASTi) framework. It incorporates a non-magnetized elliptic cone and a magnetized flux rope CME model. To validate the model's performance with in-situ observation at L1, two Carrington rotations were chosen: one during solar maxima with multiple CMEs, and one during solar minima with a single CME. The study also presents a quantitative analysis of CME-solar wind interaction using this model. To account for ambient solar wind effects, two scenarios of different complexity in solar wind conditions were established. The results indicate that ambient conditions can significantly impact some of the CME properties in the inner heliosphere. We found that the drag force on the CME front exhibits a variable nature, resulting in asymmetric deformation of the CME leading edge. Additionally, the study reveals that the impact on the distribution of CME internal pressure primarily occurs during the initial stage, while the CME density distribution is affected throughout its propagation. Moreover, regardless of the ambient conditions, it was observed that after a certain propagation time (t), the CME volume follows a non-fractal power-law expansion ($\propto t^{3.03-3.33}$) due to the attainment of a balanced state with ambient.

astro-ph.SR↗

arXiv2023

Unraveling the Thermodynamic Enigma between Fast and Slow Coronal Mass Ejections

Coronal Mass Ejections (CMEs) are the most energetic expulsions of magnetized plasma from the Sun that play a crucial role in space weather dynamics. This study investigates the diverse kinematics and thermodynamic evolution of two CMEs (CME1: 2011 September 24 and CME2: 2018 August 20) at coronal heights where thermodynamic measurements are limited. The peak 3D propagation speed of CME1 is high (1,885 km/s) with two-phase expansion (rapid and nearly constant), while the peak 3D propagation speed of CME2 is slow (420 km/s) with only a gradual expansion. We estimate the distance-dependent variations in the polytropic index, heating rate, temperature, and internal forces implementing the revised FRIS model, taking inputs of 3D kinematics estimated from the GCS model. We find CME1 exhibiting heat-release during its early-rapid acceleration decrease and jumps to the heat-absorption state during its constant acceleration phase. In contrast to CME1, CME2 shows a gradual transition from the near-adiabatic to the heat-absorption state during its gradually increasing acceleration. Our analysis reveals that although both CMEs show differential heating, they experience heat-absorption during their later propagation phases, approaching the isothermal state. The faster CME1 achieves an adiabatic state followed by an isothermal state at smaller distances from the Sun than the slower CME2. We also find that the expansion of CMEs is primarily influenced by centrifugal and thermal pressure forces, with the Lorentz force impeding expansion. Multi-wavelength observations of flux-ropes at source regions support the FRIS model-derived findings at initially observed lower coronal heights.

astro-ph.SR↗

arXiv2023

Data processing of Visible Emission Line Coronagraph Onboard ADITYA L1

ADITYA-L1 is India's first dedicated mission to observe the sun and its atmosphere from a halo orbit around L1 point. Visible emission line coronagraph (VELC) is the prime payload on board at Aditya-L1 to observe the sun's corona. VELC is designed as an internally occulted reflective coronagraph to meet the observational requirements of wide wavelength band and close to the solar limb (1.05 Ro). Images of the solar corona in continuum and spectra in three emission lines 5303Å [Fe xiv], 7892Å [Fe xi] and 10747 [Fe xiii] obtained with high cadence to be analyzed using software algorithms automatically. A reasonable part of observations will be made in synoptic mode, those, need to be analyzed and results made available for public use. The procedure involves the calibration of instrument and detectors, converting the images into fits format, correcting the images and spectra for the instrumental effects, align the images etc. Then, develop image processing algorithms to detect the occurrence of energetic events using continuum images. Also derive physical parameters, such as temperature and velocity structure of solar corona using emission line observations. Here, we describe the calibration of detectors and the development of software algorithms to detect the occurrence of CMEs and analyze the spectroscopic data.

astro-ph.SR↗