arXiv subjects

Wali Ullah Khan

Publications and source records attributed to Wali Ullah Khan.

At least 73 records · Page 4Linked to original sources

arXiv2022

Opportunities for Intelligent Reflecting Surfaces in 6G-Empowered V2X Communications

This paper first describes the introduction of 6G-empowered V2X communications and IRS technology. Then it discusses different use case scenarios of IRS enabled V2X communications and reports recent advances in the existing literature. Next, we focus our attention on the scenario of vehicular edge computing involving IRS enabled drone communications in order to reduce vehicle computational time via optimal computational and communication resource allocation. At the end, this paper highlights current challenges and discusses future perspectives of IRS enabled V2X communications in order to improve current work and spark new ideas.

eess.SP↗

arXiv2022

Opportunities for Physical Layer Security in UAV Communication Enhanced with Intelligent Reflective Surfaces

Unmanned Aerial Vehicles (UAVs) are an important component of next-generation wireless networks that can assist in high data rate communications and provide enhanced coverage.Their high mobility and aerial nature offer deployment flexibility and low-cost infrastructure support to existing cellular networks and provide many applications that rely on mobile wireless communications. However, security is a major challenge in UAV communications, and Physical Layer Security (PLS) is an important technique to improve the reliability and security of data shared with the assistance of UAVs. Recently, Intelligent Reflecting Surfaces (IRS) have emerged as a novel technology to extend and/or enhance wireless coverage by re-configuring the propagation environment of communications. This paper provides an overview of how IRS can improve the PLS of UAV networks. We discuss different use cases of PLS for IRS enhanced UAV communications and briefly review the recent advances in this area. Then based on the recent advances, we also present a case study that utilizes alternate optimization to maximize the secrecy capacity for IRS enhanced UAV scenario in the presence of multiple eavesdroppers. Finally, we highlight several open issues and research challenges to realize PLS in IRS enhanced UAV communications.

eess.SP↗

arXiv2022

Energy-Efficient Beamforming and Resource Optimization for AmBSC-Assisted Cooperative NOMA IoT Networks

In this manuscript, we present an energy-efficient alternating optimization framework based on the multi-antenna ambient backscatter communication (AmBSC) assisted cooperative non-orthogonal multiple access (NOMA) for next-generation (NG) internet-of-things (IoT) enabled communication networks. Specifically, the energy-efficiency maximization is achieved for the considered AmBSC-enabled multi-cluster cooperative IoT NOMA system by optimizing the active-beamforming vector and power-allocation coefficients (PAC) of IoT NOMA users at the transmitter, as well as passive-beamforming vector at the multi-antenna assisted backscatter node. Usually, increasing the number of IoT NOMA users in each cluster results in inter-cluster interference (ICI) (among different clusters) and intra-cluster interference (among IoT NOMA users). To combat the impact of ICI, we exploit a zero-forcing (ZF) based active-beamforming, as well as an efficient clustering technique at the source node. Further, the effect of intra-cluster interference is mitigated by exploiting an efficient power-allocation policy that determines the PAC of IoT NOMA users under the quality-of-service (QoS), cooperation, SIC decoding, and power-budget constraints. Moreover, the considered non-convex passive-beamforming problem is transformed into a standard semi-definite programming (SDP) problem by exploiting the successive-convex approximation (SCA) approximation, as well as the difference of convex (DC) programming, where Rank-1 solution of passive-beamforming is obtained based on the penalty-based method. Furthermore, the numerical analysis of simulation results demonstrates that the proposed energy-efficiency maximization algorithm exhibits an efficient performance by achieving convergence within only a few iterations.

cs.IT↗

arXiv2022

Energy-Efficient Backscatter-Assisted Coded Cooperative-NOMA for B5G Wireless Communications

In this manuscript, we propose an alternating optimization framework to maximize the energy efficiency of a backscatter-enabled cooperative Non-orthogonal multiple access (NOMA) system by optimizing the transmit power of the source, power allocation coefficients (PAC), and power of the relay node under imperfect successive interference cancellation (SIC) decoding. A three-stage low-complexity energy-efficient alternating optimization algorithm is introduced which optimizes the transmit power, PAC, and relay power by considering the quality of service (QoS), power budget, and cooperation constraints. Subsequently, a joint channel coding framework is introduced to enhance the performance of far user which has no direct communication link with the base station (BS) and has bad channel conditions. In the destination node, the far user data is jointly decoded using a Sum-product algorithm (SPA) based joint iterative decoder realized by jointly-designed Quasi-cyclic Low-density parity-check (QC-LDPC) codes. Simulation results evince that the proposed backscatter-enabled cooperative NOMA system outperforms its counterpart by providing an efficient performance in terms of energy efficiency. Also, proposed jointly-designed QC-LDPC codes provide an excellent bit-error-rate (BER) performance by jointly decoding the far user data for considered BSC cooperative NOMA system with only a few decoding iterations.

cs.IT↗

arXiv2022

A Survey on Semantic Communications for Intelligent Wireless Networks

With deployment of 6G technology, it is envisioned that competitive edge of wireless networks will be sustained and next decade's communication requirements will be stratified. Also 6G will aim to aid development of a human society which is ubiquitous and mobile, simultaneously providing solutions to key challenges such as, coverage, capacity, etc. In addition, 6G will focus on providing intelligent use-cases and applications using higher data-rates over mill-meter waves and Tera-Hertz frequency. However, at higher frequencies multiple non-desired phenomena such as atmospheric absorption, blocking, etc., occur which create a bottleneck owing to resource (spectrum and energy) scarcity. Hence, following same trend of making efforts towards reproducing at receiver, exact information which was sent by transmitter, will result in a never ending need for higher bandwidth. A possible solution to such a challenge lies in semantic communications which focuses on meaning (context) of received data as opposed to only reproducing correct transmitted data. This in turn will require less bandwidth, and will reduce bottleneck due to various undesired phenomenon. In this respect, current article presents a detailed survey on recent technological trends in regard to semantic communications for intelligent wireless networks. We focus on semantic communications architecture including model, and source and channel coding. Next, we detail cross-layer interaction, and various goal-oriented communication applications. We also present overall semantic communications trends in detail, and identify challenges which need timely solutions before practical implementation of semantic communications within 6G wireless technology. Our survey article is an attempt to significantly contribute towards initiating future research directions in area of semantic communications for intelligent 6G wireless networks.

cs.NI↗

arXiv2022

Rate Splitting Multiple Access for Cognitive Radio GEO-LEO Co-Existing Satellite Networks

LEO satellite communication has drawn particular attention recently due to its high data rate services and low round-trip latency. It is low-cost to launch and can provide global coverage. However, the spectrum scarcity might be one of the critical challenges in the growth of LEO satellites, impacting severe restrictions on the development of ground-space integrated networks. To address this issue, we propose RSMA for CR enabled GEO-LEO coexisting satellite network. In particular, this work aims to maximize the system's sum rate by simultaneously optimizing the power allocation and subcarrier beam assignment of LEO satellite communication while restricting the interference temperature to GEO satellite users. The problem of sum rate maximization is formulated as non-convex and a Global optimal solution is challenging to obtain. Therefore, we first employ the successive convex approximation technique to reduce the complexity and make the problem more tractable. Then for the power allocation, we exploit KKT condition and adopt an efficient algorithm based on the greedy approach for subcarrier beam assignment. We also propose two suboptimal schemes with fixed power allocation and random subcarrier beam assignment as the benchmark. Results demonstrate the benefits of the proposed scheme compared to the benchmark schemes.

eess.SP↗

arXiv2022

Integration of Backscatter Communication with Multi-cell NOMA: A Spectral Efficiency Optimization under Imperfect SIC

Future wireless networks are expected to connect large-scale low-powered communication devices using the available spectrum resources. Backscatter communications (BC) is an emerging technology towards battery-free transmission in future wireless networks by leveraging ambient radio frequency (RF) waves that enable communications among wireless devices. Non-orthogonal multiple access (NOMA) has recently drawn significant attention due to its high spectral efficiency. The combination of these two technologies can play an important role in the development of future networks. This paper proposes a new optimization approach to enhance the spectral efficiency of nonorthogonal multiple access (NOMA)-BC network. Our framework simultaneously optimizes the power allocation of base station and reflection coefficient (RC) of the backscatter device in each cell under the assumption of imperfect signal decoding. The problem of spectral efficiency maximization is coupled on power and RC which is challenging to solve. To make this problem tractable, we first decouple it into two subproblems and then apply the decomposition method and Karush-Kuhn-Tucker conditions to obtain the efficient solution. Numerical results show the performance of the proposed NOMA-BC network over the pure NOMA network without BC.

eess.SP↗

arXiv2022

Cooperative Backscatter NOMA with Imperfect SIC: Towards Energy Efficient Sum Rate Maximization in Sustainable 6G Networks

The combination of backscatter communication with non-orthogonal multiple access (NOMA) has the potential to support low-powered massive connections in upcoming sixth-generation (6G) wireless networks. More specifically, backscatter communication can harvest and use the existing RF signals in the atmosphere for communication, while NOMA provides communication to multiple wireless devices over the same frequency and time resources. This paper has proposed a new resource management framework for backscatter-aided cooperative NOMA communication in upcoming 6G networks. In particular, the proposed work has simultaneously optimized the base station's transmit power, relaying node, the reflection coefficient of the backscatter tag, and time allocation under imperfect successive interference cancellation to maximize the sum rate of the system. To obtain an efficient solution for the resource management framework, we have proposed a combination of the bisection method and dual theory, where the sub-gradient method is adopted to optimize the Lagrangian multipliers. Numerical results have shown that the proposed solution provides excellent performance. When the performance of the proposed technique is compared to a brute-forcing search technique that guarantees optimal solution however, is very time-consuming, it was seen that the gap in performance is actually 0\%. Hence, the proposed framework has provided performance equal to a cumbersome brute-force search technique while offering much less complexity. The works in the literature on cooperative NOMA considered equal time distribution for cooperation and direct communication. Our results showed that optimizing the time-division can increase the performance by more than 110\% for high transmission powers.

cs.IT↗

arXiv2022

Energy-Efficient Backscatter Aided Uplink NOMA Roadside Sensor Communications under Channel Estimation Errors

This work presents non-orthogonal multiple access (NOMA) enabled energy-efficient alternating optimization framework for backscatter aided wireless powered uplink sensors communications for beyond 5G intelligent transportation system (ITS). Specifically, the transmit power of carrier emitter (CE) and reflection coefficients of backscatter aided roadside sensors are optimized with channel uncertainties for the maximization of the energy efficiency (EE) of the network. The formulated problem is tackled by the proposed two-stage alternating optimization algorithm named AOBWS (alternating optimization for backscatter aided wireless powered sensors). In the first stage, AOBWS employs an iterative algorithm to obtain optimal CE transmit power through simplified closed-form computed through Cardano's formulae. In the second stage, AOBWS uses a non-iterative algorithm that provides a closed-form expression for the computation of optimal reflection coefficient for roadside sensors under their quality of service (QoS) and a circuit power constraint. The global optimal exhaustive search (ES) algorithm is used as a benchmark. Simulation results demonstrate that the AOBWS algorithm can achieve near-optimal performance with very low complexity, which makes it suitable for practical implementations.

eess.SP↗

arXiv2022

LSTM-Based Distributed Conditional Generative Adversarial Network For Data-Driven 5G-Enabled Maritime UAV Communications

5G enabled maritime unmanned aerial vehicle (UAV) communication is one of the important applications of 5G wireless network which requires minimum latency and higher reliability to support mission-critical applications. Therefore, lossless reliable communication with a high data rate is the key requirement in modern wireless communication systems. These all factors highly depend upon channel conditions. In this work, a channel model is proposed for air-to-surface link exploiting millimeter wave (mmWave) for 5G enabled maritime unmanned aerial vehicle (UAV) communication. Firstly, we will present the formulated channel estimation method which directly aims to adopt channel state information (CSI) of mmWave from the channel model inculcated by UAV operating within the Long Short Term Memory (LSTM)-Distributed Conditional generative adversarial network (DCGAN) i.e. (LSTM-DCGAN) for each beamforming direction. Secondly, to enhance the applications for the proposed trained channel model for the spatial domain, we have designed an LSTM-DCGAN based UAV network, where each one will learn mmWave CSI for all the distributions. Lastly, we have categorized the most favorable LSTM-DCGAN training method and emanated certain conditions for our UAV network to increase the channel model learning rate. Simulation results have shown that the proposed LSTM-DCGAN based network is vigorous to the error generated through local training. A detailed comparison has been done with the other available state-of-the-art CGAN network architectures i.e. stand-alone CGAN (without CSI sharing), Simple CGAN (with CSI sharing), multi-discriminator CGAN, federated learning CGAN and DCGAN. Simulation results have shown that the proposed LSTM-DCGAN structure demonstrates higher accuracy during the learning process and attained more data rate for downlink transmission as compared to the previous state of artworks.

eess.SP↗

arXiv2022

When RIS Meets GEO Satellite Communications: A New Sustainable Optimization Framework in 6G

Reflecting intelligent surfaces (RIS) is a low-cost and energy-efficient solution to achieve high spectral efficiency in sixth-generation (6G) networks. The basic idea of RIS is to smartly reconfigure the signal propagation by using passive reflecting elements. On the other side, the demand of high throughput geostationary (GEO) satellite communications (SatCom) is rapidly growing to deliver broadband services in inaccessible/insufficient covered areas of terrestrial networks. This paper proposes a GEO SatCom network, where a satellite transmits the signal to a ground mobile terminal using multicarrier communications. To enhance the effective gain, the signal delivery from satellite to the ground mobile terminal is also assisted by RIS which smartly shift the phase of the signal towards ground terminal. We consider that RIS is mounted on a high building and equipped with multiple re-configurable passive elements along with smart controller. We jointly optimize the power allocation and phase shift design to maximize the channel capacity of the system. The joint optimization problem is formulated as nonconvex due to coupled variables which is hard to solve through traditional convex optimization methods. Thus, we propose a new $ε-$optimal algorithm which is based on Mesh Adaptive Direct Search to obtain an efficient solution. Simulation results unveil the benefits of RIS-assisted SatCom in terms of system channel capacity.

eess.SP↗

arXiv2022

Energy-Efficient IRS-Aided NOMA Beamforming for 6G Wireless Communications

This manuscript presents an energy-efficient alternating optimization framework based on intelligent reflective surfaces (IRS) aided non-orthogonal multiple access beamforming (NOMA-BF) system for 6G wireless communications. Specifically, this work proposes a centralized IRS-enabled design for the NOMA-BF system to optimize the active beamforming and power allocation coefficient (PAC) of users at the transmitter in the first stage and passive beamforming at IRS in the 2nd stage to maximize the energy efficiency (EE) of the network. However, an increment in the number of supportable users with the NOMA-BF system will lead to NOMA user interference and inter-cluster interference (ICI). To mitigate the effect of ICI, first zero-forcing beamforming along with efficient user clustering algorithm is exploited and then NOMA user interference is tackled efficiently through a proposed iterative algorithm that computes PAC of NOMA user through simplified closed-form expression under the required system constraints. In the 2nd stage, the problem of passive beamforming is solved through a technique based on difference-of-convex (DC) programming and successive convex approximation (SCA). Simulation results demonstrate that the proposed alternating framework for energy-efficient IRS-assisted NOMA-BF system can achieve convergence within a few iterations and provide efficient performance in terms of EE of the system with low complexity.

eess.SP↗

arXiv2022

NOMA-enabled Backscatter Communications for Green Transportation in Automotive-Industry 5.0

Automotive-Industry 5.0 will use emerging 6G communications to provide robust, computationally intelligent, and energy-efficient data sharing among various onboard sensors, vehicles, and other Intelligent Transportation System (ITS) entities. Non-Orthogonal Multiple Access (NOMA) and backscatter communications are two key techniques of 6G communications for enhanced spectrum and energy efficiency. In this paper, we provide an introduction to green transportation and also discuss the advantages of using backscatter communications and NOMA in Automotive Industry 5.0. We also briefly review the recent work in the area of NOMA empowered backscatter communications. We discuss different use cases of backscatter communications in NOMA-enabled 6G vehicular networks. We also propose a multi-cell optimization framework to maximize the energy efficiency of the backscatter-enabled NOMA vehicular network. In particular, we jointly optimize the transmit power of the roadside unit and the reflection coefficient of the backscatter device in each cell, where several practical constraints are also taken into account. The problem of energy efficiency is formulated as nonconvex which is hard to solve directly. Thus, first, we adopt the Dinkelbach method to transform the objective function into a subtractive one, then we decouple the problem into two subproblems. Second, we employ dual theory and KKT conditions to obtain efficient solutions. Finally, we highlight some open issues and future research opportunities related to NOMA-enabled backscatter communications in 6G vehicular networks.

eess.SP↗

arXiv2022

Energy Efficiency Optimization for Backscatter Enhanced NOMA Cooperative V2X Communications under Imperfect CSI

Automotive-Industry 5.0 will use beyond fifth-generation (B5G) technologies to provide robust, computationally intelligent, and energy-efficient data sharing among various onboard sensors, vehicles, and other devices. Recently, ambient backscatter communications (AmBC) have gained significant interest in the research community for providing battery-free communications. AmBC can modulate useful data and reflect it towards near devices using the energy and frequency of existing RF signals. However, obtaining channel state information (CSI) for AmBC systems would be very challenging due to no pilot sequences and limited power. As one of the latest members of multiple access technology, non-orthogonal multiple access (NOMA) has emerged as a promising solution for connecting large-scale devices over the same spectral resources in B5G wireless networks. Under imperfect CSI, this paper provides a new optimization framework for energy-efficient transmission in AmBC enhanced NOMA cooperative vehicle-to-everything (V2X) networks. We simultaneously minimize the total transmit power of the V2X network by optimizing the power allocation at BS and reflection coefficient at backscatter sensors while guaranteeing the individual quality of services. The problem of total power minimization is formulated as non-convex optimization and coupled on multiple variables, making it complex and challenging. Therefore, we first decouple the original problem into two sub-problems and convert the nonlinear rate constraints into linear constraints. Then, we adopt the iterative sub-gradient method to obtain an efficient solution. For comparison, we also present a conventional NOMA cooperative V2X network without AmBC. Simulation results show the benefits of our proposed AmBC enhanced NOMA cooperative V2X network in terms of total achievable energy efficiency.

eess.SP↗

arXiv2022

Backscatter-Aided NOMA V2X Communication under Channel Estimation Errors

Backscatter communications (BC) has emerged as a promising technology for providing low-powered transmissions in nextG (i.e., beyond 5G) wireless networks. The fundamental idea of BC is the possibility of communications among wireless devices by using the existing ambient radio frequency signals. Non-orthogonal multiple access (NOMA) has recently attracted significant attention due to its high spectral efficiency and massive connectivity. This paper proposes a new optimization framework to minimize total transmit power of BC-NOMA cooperative vehicle-to-everything networks (V2XneT) while ensuring the quality of services. More specifically, the base station (BS) transmits a superimposed signal to its associated roadside units (RSUs) in the first time slot. Then the RSUs transmit the superimposed signal to their serving vehicles in the second time slot exploiting decode and forward protocol. A backscatter device (BD) in the coverage area of RSU also receives the superimposed signal and reflect it towards vehicles by modulating own information. Thus, the objective is to simultaneously optimize the transmit power of BS and RSUs along with reflection coefficient of BDs under perfect and imperfect channel state information. The problem of energy efficiency is formulated as non-convex and coupled on multiple optimization variables which makes it very complex and hard to solve. Therefore, we first transform and decouple the original problem into two sub-problems and then employ iterative sub-gradient method to obtain an efficient solution. Simulation results demonstrate that the proposed BC-NOMA V2XneT provides high energy efficiency than the conventional NOMA V2XneT without BC.

eess.SP↗

arXiv2022

Federated learning and next generation wireless communications: A survey on bidirectional relationship

In order to meet the extremely heterogeneous requirements of the next generation wireless communication networks, research community is increasingly dependent on using machine learning solutions for real-time decision-making and radio resource management. Traditional machine learning employs fully centralized architecture in which the entire training data is collected at one node e.g., cloud server, that significantly increases the communication overheads and also raises severe privacy concerns. Towards this end, a distributed machine learning paradigm termed as Federated learning (FL) has been proposed recently. In FL, each participating edge device trains its local model by using its own training data. Then, via the wireless channels the weights or parameters of the locally trained models are sent to the central PS, that aggregates them and updates the global model. On one hand, FL plays an important role for optimizing the resources of wireless communication networks, on the other hand, wireless communications is crucial for FL. Thus, a `bidirectional' relationship exists between FL and wireless communications. Although FL is an emerging concept, many publications have already been published in the domain of FL and its applications for next generation wireless networks. Nevertheless, we noticed that none of the works have highlighted the bidirectional relationship between FL and wireless communications. Therefore, the purpose of this survey paper is to bridge this gap in literature by providing a timely and comprehensive discussion on the interdependency between FL and wireless communications.

eess.SP↗

arXiv2021

Joint Optimization for Secure Ambient Backscatter Communication in NOMA-enabled IoT Networks

Non-orthogonal multiple access (NOMA) has emerged as a novel air interface technology for massive connectivity in sixth-generation (6G) era. The recent integration of NOMA in backscatter communication (BC) has triggered significant research interest due to its applications in low-powered Internet of Things (IoT) networks. However, the link security aspect of these networks has not been well investigated. This article provides a new optimization framework for improving the physical layer security of the NOMA ambient BC system. Our system model takes into account the simultaneous operation of NOMA IoT users and the backscatter node (BN) in the presence of multiple eavesdroppers (EDs). The EDs in the surrounding area can overhear the communication of base station (BS) and BN due to the wireless broadcast transmission. Thus, the main objective is to enhance the link security by optimizing the BN reflection coefficient and BS transmit power. To gauge the performance of the proposed scheme, we also present the suboptimal NOMA and conventional orthogonal multiple access as benchmark schemes. Monte Carlo simulation results demonstrate the superiority of the NOMA BC scheme over the pure NOMA scheme without BC and conventional orthogonal multiple access scheme in terms of system secrecy rate.

eess.SP↗

arXiv2021

Backscatter Sensors Communication for 6G Low-powered NOMA-enabled IoT Networks under Imperfect SIC

The combination of non-orthogonal multiple access (NOMA) using power-domain with backscatter sensor communication (BSC) is expected to connect a large-scale Internet of things (IoT) devices in future sixth-generation (6G) era. In this paper, we introduce a BSC in multi-cell IoT network, where a source in each cell transmits superimposed signal to its associated IoT devices using NOMA. The backscatter sensor tag (BST) also transmit data towards IoT devices by reflecting and modulating the superimposed signal of the source. A new optimization framework is provided that simultaneously optimizes the total power of each source, power allocation coefficient of IoT devices and reflection coefficient of BST under imperfect successive interference cancellation decoding. The objective of this work is to maximize the total energy efficiency of IoT network subject to quality of services of each IoT device. The problem is first transformed using the Dinkelbach method and then decoupled into two subproblems. The Karush-Kuhn-Tucker conditions and Lagrangian dual method are employed to obtain the efficient solutions. In addition, we also present the conventional NOMA network without BSC as a benchmark framework. Simulation results unveil the advantage of our considered NOMA BSC networks over the conventional NOMA network.

eess.SP↗