arXiv subjects

Walter Zimmer

Publications and source records attributed to Walter Zimmer.

At least 19 recordsLinked to original sources

arXiv2026

MDrive: Benchmarking Closed-Loop Cooperative Driving for End-to-End Multi-agent Systems

Vehicle-to-Everything (V2X) communication has emerged as a promising paradigm for autonomous driving, enabling connected agents to share complementary perception information and negotiate with each other to benefit the final planning. Existing V2X benchmarks, however, fall short in two ways: (i) open-loop evaluations fail to capture the inherently closed-loop nature of driving, leading to evaluation gaps, and (ii) current closed-loop evaluations lack behavioral and interactive diversity to reflect real-world driving. Thus, it is still unclear the extent of benefits of multi-agent systems for closed-loop driving. In this paper, we introduce MDrive, a closed-loop cooperative driving benchmark comprising 225 scenarios grounded in both NHTSA pre-crash typologies and real-world V2X datasets. Our benchmark results demonstrate that multi-agent systems are generally better than single-agent counterparts. However, current multi-agent systems still face two important challenges: (i) perception sharing enhances perceptions, but doesn't always translate to better planning; (ii) negotiation improves planning performance but harms it in complex and dense traffic scenarios. MDrive further provides an open-source toolbox for scenario generation, Real2Sim conversion, and human-in-the-loop simulation. Together, MDrive establishes a reproducible foundation for evaluating and improving the generalization and robustness of cooperative driving systems.

cs.RO↗

arXiv2026

EnerGS: Energy-Based Gaussian Splatting with Partial Geometric Priors

3D Gaussian Splatting (3DGS) has been widely adopted for scene reconstruction, where training inherently constitutes a highly coupled and non-convex optimization problem. Recent works commonly incorporate geometric priors, such as LiDAR measurements, either for initialization or as training constraints, with the goal of improving photometric reconstruction quality. However, in large-scale outdoor scenarios, such geometric supervision is often spatially incomplete and uneven, which limits its effectiveness as a reliable prior and can even be detrimental to the final reconstruction. To address this challenge, we model partially observable geometry as a continuous energy field induced by geometric evidence and propose EnerGS. Rather than enforcing geometry as a hard constraint, EnerGS provides a soft geometric guidance for the optimization of Gaussian primitives, allowing geometric information to steer the optimization process without directly restricting the solution space. Extensive experiments on large-scale outdoor scenes demonstrate that, under both sparse multi-view and monocular settings, EnerGS consistently improves photometric quality and geometric stability, while effectively mitigating overfitting during 3DGS training.

cs.CV↗

arXiv2026

CCTVBench: Contrastive Consistency Traffic VideoQA Benchmark for Multimodal LLMs

Safety-critical traffic reasoning requires contrastive consistency: models must detect true hazards when an accident occurs, and reliably reject plausible-but-false hypotheses under near-identical counterfactual scenes. We present CCTVBench, a Contrastive Consistency Traffic VideoQA Benchmark built on paired real accident videos and world-model-generated counterfactual counterparts, together with minimally different, mutually exclusive hypothesis questions. CCTVBench enforces a single structured decision pattern over each video question quadruple and provides actionable diagnostics that decompose failures into positive omission, positive swap, negative hallucination, and mutual-exclusivity violation, while separating video versus question consistency. Experiments across open-source and proprietary video LLMs reveal a large and persistent gap between standard per-instance QA metrics and quadruple-level contrastive consistency, with unreliable none-of-the-above rejection as a key bottleneck. Finally, we introduce C-TCD, a contrastive decoding approach leveraging a semantically exclusive counterpart video as the contrast input at inference time, improving both instance-level QA and contrastive consistency.

cs.CV↗

arXiv2026

SGTA: Scene-Graph Based Multi-Modal Traffic Agent for Video Understanding

We present Scene-Graph Based Multi-Modal Traffic Agent (SGTA), a modular framework for traffic video understanding that combines structured scene graphs with multi-modal reasoning. It constructs a traffic scene graph from roadside videos using detection, tracking, and lane extraction, followed by tool-based reasoning over both symbolic graph queries and visual inputs. SGTA adopts ReAct to process interleaved reasoning traces from large language models with tool invocations, enabling interpretable decision-making for complex video questions. Experiments on selected TUMTraffic VideoQA dataset sample demonstrate that SGTA achieves competitive accuracy across multiple question types while providing transparent reasoning steps. These results highlight the potential of integrating structured scene representations with multi-modal agents for traffic video understanding.

cs.CV↗

arXiv2026

Energy-Aware Imitation Learning for Steering Prediction Using Events and Frames

In autonomous driving, relying solely on frame-based cameras can lead to inaccuracies caused by factors like long exposure times, high-speed motion, and challenging lighting conditions. To address these issues, we introduce a bio-inspired vision sensor known as the event camera. Unlike conventional cameras, event cameras capture sparse, asynchronous events that provide a complementary modality to mitigate these challenges. In this work, we propose an energy-aware imitation learning framework for steering prediction that leverages both events and frames. Specifically, we design an Energy-driven Cross-modality Fusion Module (ECFM) and an energy-aware decoder to produce reliable and safe predictions. Extensive experiments on two public real-world datasets, DDD20 and DRFuser, demonstrate that our method outperforms existing state-of-the-art (SOTA) approaches. The codes and trained models will be released upon acceptance.

cs.CV↗

arXiv2026

SegRGB-X: General RGB-X Semantic Segmentation Model

Semantic segmentation across arbitrary sensor modalities faces significant challenges due to diverse sensor characteristics, and the traditional configurations for this task result in redundant development efforts. We address these challenges by introducing a universal arbitrary-modal semantic segmentation framework that unifies segmentation across multiple modalities. Our approach features three key innovations: (1) the Modality-aware CLIP (MA-CLIP), which provides modality-specific scene understanding guidance through LoRA fine-tuning; (2) Modality-aligned Embeddings for capturing fine-grained features; and (3) the Domain-specific Refinement Module (DSRM) for dynamic feature adjustment. Evaluated on five diverse datasets with different complementary modalities (event, thermal, depth, polarization, and light field), our model surpasses specialized multi-modal methods and achieves state-of-the-art performance with a mIoU of 65.03%. The codes will be released upon acceptance.

cs.CV↗

arXiv2025

Safety-Critical Learning for Long-Tail Events: The TUM Traffic Accident Dataset

Even though a significant amount of work has been done to increase the safety of transportation networks, accidents still occur regularly. They must be understood as an unavoidable and sporadic outcome of traffic networks. We present the TUM Traffic Accident (TUMTraf-A) dataset, a collection of real-world highway accidents. It contains ten sequences of vehicle crashes at high-speed driving with 294,924 labeled 2D and 93,012 labeled 3D boxes and track IDs within 48,144 labeled frames recorded from four roadside cameras and LiDARs at 10 Hz. The dataset contains ten object classes and is provided in the OpenLABEL format. We propose Accid3nD, an accident detection model that combines a rule-based approach with a learning-based one. Experiments and ablation studies on our dataset show the robustness of our proposed method. The dataset, model, and code are available on our project website: https://tum-traffic-dataset.github.io/tumtraf-a.

cs.CV↗

arXiv2025

Research Challenges and Progress in the End-to-End V2X Cooperative Autonomous Driving Competition

With the rapid advancement of autonomous driving technology, vehicle-to-everything (V2X) communication has emerged as a key enabler for extending perception range and enhancing driving safety by providing visibility beyond the line of sight. However, integrating multi-source sensor data from both ego-vehicles and infrastructure under real-world constraints, such as limited communication bandwidth and dynamic environments, presents significant technical challenges. To facilitate research in this area, we organized the End-to-End Autonomous Driving through V2X Cooperation Challenge, which features two tracks: cooperative temporal perception and cooperative end-to-end planning. Built on the UniV2X framework and the V2X-Seq-SPD dataset, the challenge attracted participation from over 30 teams worldwide and established a unified benchmark for evaluating cooperative driving systems. This paper describes the design and outcomes of the challenge, highlights key research problems including bandwidth-aware fusion, robust multi-agent planning, and heterogeneous sensor integration, and analyzes emerging technical trends among top-performing solutions. By addressing practical constraints in communication and data fusion, the challenge contributes to the development of scalable and reliable V2X-cooperative autonomous driving systems.

cs.RO↗

arXiv2025

HeCoFuse: Cross-Modal Complementary V2X Cooperative Perception with Heterogeneous Sensors

Real-world Vehicle-to-Everything (V2X) cooperative perception systems often operate under heterogeneous sensor configurations due to cost constraints and deployment variability across vehicles and infrastructure. This heterogeneity poses significant challenges for feature fusion and perception reliability. To address these issues, we propose HeCoFuse, a unified framework designed for cooperative perception across mixed sensor setups where nodes may carry Cameras (C), LiDARs (L), or both. By introducing a hierarchical fusion mechanism that adaptively weights features through a combination of channel-wise and spatial attention, HeCoFuse can tackle critical challenges such as cross-modality feature misalignment and imbalanced representation quality. In addition, an adaptive spatial resolution adjustment module is employed to balance computational cost and fusion effectiveness. To enhance robustness across different configurations, we further implement a cooperative learning strategy that dynamically adjusts fusion type based on available modalities. Experiments on the real-world TUMTraf-V2X dataset demonstrate that HeCoFuse achieves 43.22% 3D mAP under the full sensor configuration (LC+LC), outperforming the CoopDet3D baseline by 1.17%, and reaches an even higher 43.38% 3D mAP in the L+LC scenario, while maintaining 3D mAP in the range of 21.74% to 43.38% across nine heterogeneous sensor configurations. These results, validated by our first-place finish in the CVPR 2025 DriveX challenge, establish HeCoFuse as the current state-of-the-art on TUM-Traf V2X dataset while demonstrating robust performance across diverse sensor deployments.

cs.CV↗

arXiv2025

A New Perspective On AI Safety Through Control Theory Methodologies

While artificial intelligence (AI) is advancing rapidly and mastering increasingly complex problems with astonishing performance, the safety assurance of such systems is a major concern. Particularly in the context of safety-critical, real-world cyber-physical systems, AI promises to achieve a new level of autonomy but is hampered by a lack of safety assurance. While data-driven control takes up recent developments in AI to improve control systems, control theory in general could be leveraged to improve AI safety. Therefore, this article outlines a new perspective on AI safety based on an interdisciplinary interpretation of the underlying data-generation process and the respective abstraction by AI systems in a system theory-inspired and system analysis-driven manner. In this context, the new perspective, also referred to as data control, aims to stimulate AI engineering to take advantage of existing safety analysis and assurance in an interdisciplinary way to drive the paradigm of data control. Following a top-down approach, a generic foundation for safety analysis and assurance is outlined at an abstract level that can be refined for specific AI systems and applications and is prepared for future innovation.

cs.AI↗

arXiv2025

Generative AI for Autonomous Driving: Frontiers and Opportunities

Generative Artificial Intelligence (GenAI) constitutes a transformative technological wave that reconfigures industries through its unparalleled capabilities for content creation, reasoning, planning, and multimodal understanding. This revolutionary force offers the most promising path yet toward solving one of engineering's grandest challenges: achieving reliable, fully autonomous driving, particularly the pursuit of Level 5 autonomy. This survey delivers a comprehensive and critical synthesis of the emerging role of GenAI across the autonomous driving stack. We begin by distilling the principles and trade-offs of modern generative modeling, encompassing VAEs, GANs, Diffusion Models, and Large Language Models (LLMs). We then map their frontier applications in image, LiDAR, trajectory, occupancy, video generation as well as LLM-guided reasoning and decision making. We categorize practical applications, such as synthetic data workflows, end-to-end driving strategies, high-fidelity digital twin systems, smart transportation networks, and cross-domain transfer to embodied AI. We identify key obstacles and possibilities such as comprehensive generalization across rare cases, evaluation and safety checks, budget-limited implementation, regulatory compliance, ethical concerns, and environmental effects, while proposing research plans across theoretical assurances, trust metrics, transport integration, and socio-technical influence. By unifying these threads, the survey provides a forward-looking reference for researchers, engineers, and policymakers navigating the convergence of generative AI and advanced autonomous mobility. An actively maintained repository of cited works is available at https://github.com/taco-group/GenAI4AD.

cs.CV↗

arXiv2025

Towards Vision Zero: The TUM Traffic Accid3nD Dataset

Even though a significant amount of work has been done to increase the safety of transportation networks, accidents still occur regularly. They must be understood as unavoidable and sporadic outcomes of traffic networks. No public dataset contains 3D annotations of real-world accidents recorded from roadside camera and LiDAR sensors. We present the TUM Traffic Accid3nD (TUMTraf-Accid3nD) dataset, a collection of real-world highway accidents in different weather and lighting conditions. It contains vehicle crashes at high-speed driving with 2,634,233 labeled 2D bounding boxes, instance masks, and 3D bounding boxes with track IDs. In total, the dataset contains 111,945 labeled image and point cloud frames recorded from four roadside cameras and LiDARs at 25 Hz. The dataset contains six object classes and is provided in the OpenLABEL format. We propose an accident detection model that combines a rule-based approach with a learning-based one. Experiments and ablation studies on our dataset show the robustness of our proposed method. The dataset, model, and code are available on our website: https://accident-dataset.github.io.

cs.CV↗

arXiv2025

CoDa-4DGS: Dynamic Gaussian Splatting with Context and Deformation Awareness for Autonomous Driving

Dynamic scene rendering opens new avenues in autonomous driving by enabling closed-loop simulations with photorealistic data, which is crucial for validating end-to-end algorithms. However, the complex and highly dynamic nature of traffic environments presents significant challenges in accurately rendering these scenes. In this paper, we introduce a novel 4D Gaussian Splatting (4DGS) approach, which incorporates context and temporal deformation awareness to improve dynamic scene rendering. Specifically, we employ a 2D semantic segmentation foundation model to self-supervise the 4D semantic features of Gaussians, ensuring meaningful contextual embedding. Simultaneously, we track the temporal deformation of each Gaussian across adjacent frames. By aggregating and encoding both semantic and temporal deformation features, each Gaussian is equipped with cues for potential deformation compensation within 3D space, facilitating a more precise representation of dynamic scenes. Experimental results show that our method improves 4DGS's ability to capture fine details in dynamic scene rendering for autonomous driving and outperforms other self-supervised methods in 4D reconstruction and novel view synthesis. Furthermore, CoDa-4DGS deforms semantic features with each Gaussian, enabling broader applications.

cs.CV↗

arXiv2025

TUMTraffic-VideoQA: A Benchmark for Unified Spatio-Temporal Video Understanding in Traffic Scenes

We present TUMTraffic-VideoQA, a novel dataset and benchmark designed for spatio-temporal video understanding in complex roadside traffic scenarios. The dataset comprises 1,000 videos, featuring 85,000 multiple-choice QA pairs, 2,300 object captioning, and 5,700 object grounding annotations, encompassing diverse real-world conditions such as adverse weather and traffic anomalies. By incorporating tuple-based spatio-temporal object expressions, TUMTraffic-VideoQA unifies three essential tasks-multiple-choice video question answering, referred object captioning, and spatio-temporal object grounding-within a cohesive evaluation framework. We further introduce the TUMTraffic-Qwen baseline model, enhanced with visual token sampling strategies, providing valuable insights into the challenges of fine-grained spatio-temporal reasoning. Extensive experiments demonstrate the dataset's complexity, highlight the limitations of existing models, and position TUMTraffic-VideoQA as a robust foundation for advancing research in intelligent transportation systems. The dataset and benchmark are publicly available to facilitate further exploration.

cs.CV↗

arXiv2025

Enhancing Highway Safety: Accident Detection on the A9 Test Stretch Using Roadside Sensors

Road traffic injuries are the leading cause of death for people aged 5-29, resulting in about 1.19 million deaths each year. To reduce these fatalities, it is essential to address human errors like speeding, drunk driving, and distractions. Additionally, faster accident detection and quicker medical response can help save lives. We propose an accident detection framework that combines a rule-based approach with a learning-based one. We introduce a dataset of real-world highway accidents featuring high-speed crash sequences. It includes 294,924 labeled 2D boxes, 93,012 labeled 3D boxes, and track IDs across 48,144 frames captured at 10 Hz using four roadside cameras and LiDAR sensors. The dataset covers ten object classes and is released in the OpenLABEL format. Our experiments and analysis demonstrate the reliability of our method.

cs.CV↗

arXiv2024

Transfer Learning from Simulated to Real Scenes for Monocular 3D Object Detection

Accurately detecting 3D objects from monocular images in dynamic roadside scenarios remains a challenging problem due to varying camera perspectives and unpredictable scene conditions. This paper introduces a two-stage training strategy to address these challenges. Our approach initially trains a model on the large-scale synthetic dataset, RoadSense3D, which offers a diverse range of scenarios for robust feature learning. Subsequently, we fine-tune the model on a combination of real-world datasets to enhance its adaptability to practical conditions. Experimental results of the Cube R-CNN model on challenging public benchmarks show a remarkable improvement in detection performance, with a mean average precision rising from 0.26 to 12.76 on the TUM Traffic A9 Highway dataset and from 2.09 to 6.60 on the DAIR-V2X-I dataset when performing transfer learning. Code, data, and qualitative video results are available on the project website: https://roadsense3d.github.io.

cs.CV↗

arXiv2024

WARM-3D: A Weakly-Supervised Sim2Real Domain Adaptation Framework for Roadside Monocular 3D Object Detection

Existing roadside perception systems are limited by the absence of publicly available, large-scale, high-quality 3D datasets. Exploring the use of cost-effective, extensive synthetic datasets offers a viable solution to tackle this challenge and enhance the performance of roadside monocular 3D detection. In this study, we introduce the TUMTraf Synthetic Dataset, offering a diverse and substantial collection of high-quality 3D data to augment scarce real-world datasets. Besides, we present WARM-3D, a concise yet effective framework to aid the Sim2Real domain transfer for roadside monocular 3D detection. Our method leverages cheap synthetic datasets and 2D labels from an off-the-shelf 2D detector for weak supervision. We show that WARM-3D significantly enhances performance, achieving a +12.40% increase in mAP 3D over the baseline with only pseudo-2D supervision. With 2D GT as weak labels, WARM-3D even reaches performance close to the Oracle baseline. Moreover, WARM-3D improves the ability of 3D detectors to unseen sample recognition across various real-world environments, highlighting its potential for practical applications.

cs.CV↗

arXiv2024

GraphRelate3D: Context-Dependent 3D Object Detection with Inter-Object Relationship Graphs

Accurate and effective 3D object detection is critical for ensuring the driving safety of autonomous vehicles. Recently, state-of-the-art two-stage 3D object detectors have exhibited promising performance. However, these methods refine proposals individually, ignoring the rich contextual information in the object relationships between the neighbor proposals. In this study, we introduce an object relation module, consisting of a graph generator and a graph neural network (GNN), to learn the spatial information from certain patterns to improve 3D object detection. Specifically, we create an inter-object relationship graph based on proposals in a frame via the graph generator to connect each proposal with its neighbor proposals. Afterward, the GNN module extracts edge features from the generated graph and iteratively refines proposal features with the captured edge features. Ultimately, we leverage the refined features as input to the detection head to obtain detection results. Our approach improves upon the baseline PV-RCNN on the KITTI validation set for the car class across easy, moderate, and hard difficulty levels by 0.82%, 0.74%, and 0.58%, respectively. Additionally, our method outperforms the baseline by more than 1% under the moderate and hard levels BEV AP on the test server.

cs.CV↗