arXiv subjects

Wan-Jen Huang

Publications and source records attributed to Wan-Jen Huang.

8 recordsLinked to original sources

arXiv2026

Ray-Tracing-Parameter-Based Lightweight Hybrid Precoding via Cascade XGBoost for Wideband Massive MIMO-OFDM Systems

Hybrid precoding reduces the radio-frequency (RF) hardware burden in wideband massive MIMO-OFDM systems, but conventional optimization and deep neural network (DNN)-based approaches can incur high online complexity. This paper proposes XGB-SVD, a lightweight hybrid precoding framework that maps compact ray-tracing path parameters directly to analog beamforming codeword indices using cascade eXtreme Gradient Boosting (XGBoost). The cascade captures sequential beam-selection dependencies and transmit--receive propagation correlation, while the digital precoder and combiner are obtained from the reduced-dimensional equivalent channel using singular value decomposition (SVD). Evaluations over five DeepMIMO scenarios spanning sub-6-GHz and millimeter-wave bands show that XGB-SVD consistently outperforms the considered DNN baselines and approaches simultaneous orthogonal matching pursuit (SOMP) in several environments. Cross-scenario results further indicate improved transfer from propagation-diverse training environments, while XGB-SVD provides lower online computational and training costs than the DNN baselines.

eess.SP↗

arXiv2026

Reduced-Feedback Hybrid Precoding for Wideband mmWave MIMO-OFDM Systems via Hierarchical Interpolation

In this paper, we propose a feedback-efficient hybrid precoding framework for wideband millimeter-wave (mmWave) multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) systems. To reduce the hardware cost of radio-frequency (RF) chains and the feedback burden associated with frequency-selective digital precoding, frequency-flat analog precoders and combiners are first constructed from the dominant angle-of-arrival (AoA) and angle-of-departure (AoD) directions associated with the strongest propagation paths. For digital precoding, a shared quantized codebook is designed using the Lloyd algorithm, and a binary-search-based hierarchical interpolation method is developed to identify codeword switching locations between adjacent pilot subcarriers. By avoiding exhaustive codeword comparisons over all intermediate subcarriers, the proposed method reduces online search complexity and enables compact digital-precoder feedback. For the considered system configuration, the proposed method achieves a worst-case feedback reduction of approximately 98.34% relative to full-grid per-subcarrier feedback. Simulation results further demonstrate competitive spectral efficiency and bit error rate (BER) performance, low computational cost, and robustness under imperfect effective channel state information (CSI).

cs.IT↗

arXiv2025

Sustainable LSTM-Based Precoding for RIS-Aided mmWave MIMO Systems with Implicit CSI

In this paper, we propose a sustainable long short-term memory (LSTM)-based precoding framework for reconfigurable intelligent surface (RIS)-assisted millimeter-wave (mmWave) MIMO systems. Instead of explicit channel state information (CSI) estimation, the framework exploits uplink pilot sequences to implicitly learn channel characteristics, reducing both pilot overhead and inference complexity. Practical hardware constraints are addressed by incorporating the phase-dependent amplitude model of RIS elements, while a multi-label training strategy improves robustness when multiple near-optimal codewords yield comparable performance. Simulations show that the proposed design achieves over 90% of the spectral efficiency of exhaustive search (ES) with only 2.2% of its computation time, cutting energy consumption by nearly two orders of magnitude. The method also demonstrates resilience under distribution mismatch and scalability to larger RIS arrays, making it a practical and energy-efficient solution for sustainable 6G wireless networks.

eess.SP↗

arXiv2025

DNN-Based Precoding in RIS-Aided mmWave MIMO Systems With Practical Phase Shift

In this paper, the precoding design is investigated for maximizing the throughput of millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems with obstructed direct communication paths. In particular, a reconfigurable intelligent surface (RIS) is employed to enhance MIMO transmissions, considering mmWave characteristics related to line-of-sight (LoS) and multipath effects. The traditional exhaustive search (ES) for optimal codewords in the continuous phase shift is computationally intensive and time-consuming. To reduce computational complexity, permuted discrete Fourier transform (DFT) vectors are used for finding codebook design, incorporating amplitude responses for practical or ideal RIS systems. However, even if the discrete phase shift is adopted in the ES, it results in significant computation and is time-consuming. Instead, the trained deep neural network (DNN) is developed to facilitate faster codeword selection. Simulation results show that the DNN maintains sub-optimal spectral efficiency even as the distance between the end-user and the RIS has variations in the testing phase. These results highlight the potential of DNN in advancing RIS-aided systems.

eess.SP↗

arXiv2025

Deep Reinforcement Learning-Based Precoding for Multi-RIS-Aided Multiuser Downlink Systems with Practical Phase Shift

This study considers multiple reconfigurable intelligent surfaces (RISs)-aided multiuser downlink systems with the goal of jointly optimizing the transmitter precoding and RIS phase shift matrix to maximize spectrum efficiency. Unlike prior work that assumed ideal RIS reflectivity, a practical coupling effect is considered between reflecting amplitude and phase shift for the RIS elements. This makes the optimization problem non-convex. To address this challenge, we propose a deep deterministic policy gradient (DDPG)-based deep reinforcement learning (DRL) framework. The proposed model is evaluated under both fixed and random numbers of users in practical mmWave channel settings. Simulation results demonstrate that, despite its complexity, the proposed DDPG approach significantly outperforms optimization-based algorithms and double deep Q-learning, particularly in scenarios with random user distributions.

cs.IT↗

arXiv2025

Capacity-Net-Based RIS Precoding Design without Channel Estimation for mmWave MIMO System

In this paper, we propose Capacity-Net, a novel unsupervised learning approach aimed at maximizing the achievable rate in reflecting intelligent surface (RIS)-aided millimeter-wave (mmWave) multiple input multiple output (MIMO) systems. To combat severe channel fading of the mmWave spectrum, we optimize the phase-shifting factors of the reflective elements in the RIS to enhance the achievable rate. However, most optimization algorithms rely heavily on complete and accurate channel state information (CSI), which is often challenging to acquire since the RIS is mostly composed of passive components. To circumvent this challenge, we leverage unsupervised learning techniques with implicit CSI provided by the received pilot signals. Specifically, it usually requires perfect CSI to evaluate the achievable rate as a performance metric of the current optimization result of the unsupervised learning method. Instead of channel estimation, the Capacity-Net is proposed to establish a mapping among the received pilot signals, optimized RIS phase shifts, and the resultant achievable rates. Simulation results demonstrate the superiority of the proposed Capacity-Net-based unsupervised learning approach over learning methods based on traditional channel estimation.

cs.IT↗

arXiv2025

Green Learning for STAR-RIS mmWave Systems with Implicit CSI

In this paper, a green learning (GL)-based precoding framework is proposed for simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS)-aided millimeter-wave (mmWave) MIMO broadcasting systems. Motivated by the growing emphasis on environmental sustainability in future 6G networks, this work adopts a broadcasting transmission architecture for scenarios where multiple users share identical information, improving spectral efficiency and reducing redundant transmissions and power consumption. Different from conventional optimization methods, such as block coordinate descent (BCD) that require perfect channel state information (CSI) and iterative computation, the proposed GL framework operates directly on received uplink pilot signals without explicit CSI estimation. Unlike deep learning (DL) approaches that require CSI-based labels for training, the proposed GL approach also avoids deep neural networks and backpropagation, leading to a more lightweight design. Although the proposed GL framework is trained with supervision generated by BCD under full CSI, inference is performed in a fully CSI-free manner. The proposed GL integrates subspace approximation with adjusted bias (Saab), relevant feature test (RFT)-based supervised feature selection, and eXtreme gradient boosting (XGBoost)-based decision learning to jointly predict the STAR-RIS coefficients and transmit precoder. Simulation results show that the proposed GL approach achieves competitive spectral efficiency compared to BCD and DL-based models, while reducing floating-point operations (FLOPs) by over four orders of magnitude. These advantages make the proposed GL approach highly suitable for real-time deployment in energy- and hardware-constrained broadcasting scenarios.

eess.SP↗

arXiv2022

Low-Complexity Sum-Capacity Maximization for Intelligent Reflecting Surface-Aided MIMO Systems

Reducing computational complexity is crucial in optimizing the phase shifts of Intelligent Reflecting Surface (IRS) systems since IRS-assisted communication systems are generally deployed with a large number of reflecting elements (REs). This letter proposes a low-complexity algorithm, designated as Dimension-wise Sinusoidal Maximization (DSM), to obtain the optimal IRS phase shifts that maximize the sum capacity of a MIMO network. The algorithm exploits the fact that the objective function for the optimization problem is sinusoidal w.r.t. the phase shift of each RE. The numerical results show that DSM achieves a near-maximal sum rate and faster convergence speed than two other benchmark methods.

cs.IT↗