arXiv subjects

Wangyu Hu

Publications and source records attributed to Wangyu Hu.

At least 19 recordsLinked to original sources

arXiv2026

"Anomalous Solid Solution" in Ultra-High Melting Point Oxides: A New Strategy for Developing Ultra-High Temperature Thermal Protection Coatings

The high-temperature performance of ultra-high temperature ceramics (UHTCs) in atmospheric environment is fundamentally governed by their melting points of oxidation products. Typical high-melting-point oxides, such as ZrO2, undergo phase transformations at elevated temperatures, leading to structural instability. Although doping with rare-earth or transition-metal cations can suppress these transformations, it often results in a reduction in melting point, thereby limiting practical service temperature. Here, ytterbia-stabilized zirconia (YbSZ) coatings are prepared via atmospheric plasma spraying, achieving a remarkable increase in the melting point of ZrO2 to approximately 2850 $^\circ\mathrm{C}$ and raising the ultimate plasma and oxyacetylene ablation temperature up to nearly 2780 $^\circ\mathrm{C}$ and 3200 $^\circ\mathrm{C}$, which is the highest temperature resistance property as reported. Notably, this performance enhancement originates from a synergistic mechanism of strengthened ionic-covalent mixed bonding and improved oxygen vacancy stability. Based on these findings, the concept of "anomalous solid solution" is firstly proposed to be used in the area of ultra-high temperature protection, which provides new insights into the compositional design of UHTC systems.

cond-mat.mtrl-sci↗

arXiv2026

Thermodynamics of stacking faults and phase stability in cobalt alloys: A combined computational and experimental study

Stacking fault energy dictates phase stability and deformation behavior in Co alloys and WC-Co cemented carbides, yet a quantitative assessment of alloying effects at finite temperatures remains poorly established. By integrating first-principles thermodynamics with microstructural characterization, we provide a rigorous evaluation of these influences across atomic and macroscopic scales. We show that stacking fault energetics at 0K for transition metal solutes are primarily governed by atomic misfit volume. While 4d and 5d elements follow a consistent linear trend, specific 3d solutes exhibit significant deviations due to non-negligible magnetic contributions. By incorporating phonon, electronic, longitudinal spin-fluctuation, and magnetic free-energy contributions, the model accurately captures the fcc-hcp transformation and quantifies how diverse solutes modulate the phase landscape. We demonstrate that V, Ni, Fe, Mo, and W lower the transformation temperature by stabilizing fcc phase, while Cr and C exhibit the opposite effect, consistent with experimental phase diagrams. Furthermore, microscopic analysis confirms that higher W content dissolved in the Co suppresses stacking-fault formation by elevating the stacking fault energy at finite temperatures. This work clarifies the physical mechanisms by which alloying regulates stacking fault energy and phase stability in Co-based systems, providing guidance for the design of Co-based alloys and WC-Co cemented carbides.

cond-mat.mtrl-sci↗

arXiv2026

Atomic-Scale Insights into Solute Drag Effects on Grain Boundary Motion in Mg-Al and Mg-Ca Alloys

The slip behavior of dislocations and grain boundaries critically governs recrystallization and plastic deformation in Mg alloys and can be strongly influenced by solutes. However, the quantitative effects of solute distribution on defect mobility remain unclear. Using molecular dynamics and Monte Carlo simulations, we systematically investigate how Al and Ca solutes affect the motion of dislocations, low-angle grain boundaries (LAGBs), and high-angle grain boundaries (HAGBs) in Mg. Within the idealized framework of random solid-solution, solute drag is dominated by elastic interactions arising from atomic size mismatch, resulting in a stronger resistance from Ca than from Al. In contrast, under the more realistic condition where solute segregation occurs, the dominant mechanism shifts to chemically driven pinning, whose effectiveness is governed by the attainable segregation density. Owing to strong Ca-Ca repulsion, Al achieves substantially higher segregation concentrations than Ca and therefore exerts much stronger pinning effects. Notably, solute-induced retardation is significantly more pronounced for HAGBs than for LAGBs, leading to amplified solute effects during the late stages of recrystallization, where grain growth is controlled primarily by HAGB migration. These results provide atomic-scale insight into experimentally observed grain refinement in Mg alloys.

cond-mat.mtrl-sci↗

arXiv2026

Segregation-Controlled Diffusion-Induced Grain Boundary Migration in Alloy 690

Grain boundary (GB) migration accompanied by Cr depletion is widely observed in Alloy 690 and is closely linked to intergranular degradation and stress corrosion cracking. However, the fundamental driving force for GB migration and its link with Cr depletion remains unclear. In this work, hybrid molecular dynamics and semi-grand canonical Monte Carlo simulations were employed to investigate GB migration in Alloy 690 under coupled solute diffusion and segregation effects across a range of GB characters. The results show that Cr segregation at GBs, while generally considered favorable for GB stability, can facilitate diffusion-induced GB migration and Cr depletion. Cr diffusion along GBs produces localized Cr depletion zones that are energetically incompatible with positively segregating GBs, generating a chemical driving force that drives GB migration toward the Cr-rich matrix, which ultimately results in persistent GB migration accompanied by a Cr depletion. By quantifying solute-GB interaction energetics, we demonstrate that GB migration is quantitively controlled by the coupled effects of solute diffusivity and segregation strength. These mechanistic insights provide a unified framework that rationalizes experimentally observed correlations between GB character, Cr depletion, and GB migration in Cr-containing alloys.

cond-mat.mtrl-sci↗

arXiv2025

Breaking the Sabatier Principle by Dynamic Adsorption-Desorption Decoupling in Electrocatalytic Hydrogen Evolution

The Sabatier principle establishes a fundamental trade-off in heterogeneous electrocatalysis.In the hydrogen evolution reaction (HER), this trade-off is manifested by the coupling of Volmer step, which requires strong hydrogen adsorption, with the Heyrovsky/Tafel step, which favors facile desorption, thus giving rise to the classical volcano relationship and limiting activity even at $\Delta G=0$. Here, we demonstrate a ferroelectric platform with dynamic tunability -- monolayer GeS$_2$ decorated with transition metal atoms as a proof-of-concept -- where polarization-driven surface electronic reconstruction enables real-time modulation of intermediate binding strength, thereby breaking the Sabatier constraint. Reversible control of hydrogen adsorption allows strong H binding to accelerate the Volmer step, followed by weakened adsorption to promote the Heyrovsky/Tafel step.This dynamic adsorption-desorption decoupling not only surpasses the volcano limit to achieve unprecedented HER activity, but also establishes a general paradigm for designing adaptive electrocatalysts capable of reconfiguring under operating conditions.

cond-mat.mtrl-sci↗

arXiv2025

Dislocation Transmission Across Tilt Low-Angle Grain Boundaries in BCC Fe: The Role of Elastic Interactions

Low-angle grain boundaries (LAGBs) are often regarded as penetrable interfaces to dislocation motion, yet recent studies suggest they can also act as strong barriers. The origin of this duality remains debated, particularly regarding the role of elastic interactions. Here, large-scale molecular dynamics simulations are employed to investigate dislocation transmission across various tilt LAGBs in BCC Fe. The results show that transmission resistance varies widely with boundary-dislocation geometry. Contrary to the prevailing view that dislocation reactions dominate, elastic interactions between lattice and boundary dislocations emerge as the primary controlling factor. Screw and screw-like dislocations generate shear stresses that bend GB dislocations and produce strong barriers, whereas edge dislocations lack such stresses and transmit more readily. Consequently, barrier strength increases as the dislocation character angle decreases, with screw dislocations experiencing the strongest resistance. From these insights, we develop an analytical model that quantitatively links net transmission stress to dislocation character, boundary inclination, and boundary misorientation, reproducing the simulation results with excellent agreement. These results establish the dominant role of elastic interactions in dislocation-LAGB interactions and provide a predictive basis for designing materials strengthened by controlled boundary architectures.

cond-mat.mtrl-sci↗

arXiv2025

Active-Spin-State-Derived Descriptor for Hydrogen Evolution Reaction Catalysis

Spin states are pivotal in modulating the electrocatalytic activity of transition-metal (TM)-based compounds, yet quantitatively evaluating the activity-spin state correlation remains a formidable challenge. Here, we propose an 'activity index n' as a descriptor, to assess the activity of the spin states for the hydrogen evolution reaction (HER). n descriptor integrates three key electronic parameters: the proportion (P), broadening range (R) and center cc of active spin state, which collectively account for the electronic structure modulation induced by both the intrinsic active site and its local coordination environment. Using 1T-phase ZrSe2-anchored TM atoms (TM=Sc to Ni) as prototypes, we reveal that the correlation between Gibbs free energy and the n value follows a linear relation, namely, the vGH reduces as the n decreases. Notably, ZrSe2-Mn exhibits the optimal n value (-0.56), corresponding the best HER activity with a vGH of 0.04 eV closer to the thermoneutral ideal value (0 eV) than even Pt (vGH = -0.09 eV). This relationship suggests that n is the effective descriptor of active spin state for HER of TM-based catalysts. Our study brings fundamental insights into the HER activity-spin state correlation, offering new strategies for HER catalyst design.

cond-mat.mtrl-sci↗

arXiv2025

Electronic origin of stability of 2D 1H-phase Janus transition metal dichalcogenides and beyond

Janus transition metal dichalcogenides (JTMDs) monolayers have emerged as a new paradigm to broaden the family of two-dimensional (2D) materials. Despite numerous theoretical predictions of JTMDs, their experimental realization remains scarce, most probably due to intrinsic structural fragility. We identify a dependence of the structural stability of 1H-phase JTMDs on the transition metal group, with Group-VIB-based monolayers exhibiting robust stability, as evidenced by the successful synthesized MoSSe and WSSe. The group-dependent stability arises from the competition between metal-ligand ionic bonding and ligand-ligand covalent bonding, as well as the high-energy d-electron orbital splitting. We propose an electron configuration that describes the interactions of electrons near the Fermi level to correlate the stability, and introduce an electron compensation strategy to stabilize certain unstable JTMDs systems. Guided by the electronic origin of stability, we predict a family of stable 2D Janus transition metal halides with intrinsic ferromagnetic valley properties. This work bridges the gap between electronic structure and stability predictions, and extends the design rules for synthesizing 2D Janus materials.

cond-mat.mtrl-sci↗

arXiv2024

Modulating dislocation reactions through preferential hydrogen segregation in bcc metals

The interaction between dislocations is fundamental to plastic deformation, work hardening, and defect accumulation. While extensive research has focused on the impact of solutes on individual dislocations, how solutes affect dislocation-dislocation reactions remains largely unexplored. Here, using atomistic simulations of iron as a model bcc system, we demonstrate that hydrogen solutes enable two <111>/2 screw dislocations to react and form a <001> edge dislocation junction, a process that is otherwise unfavorable in hydrogen-free environments. This phenomenon arises from the preferential segregation of hydrogen around the <001> dislocation, which reduces the energy of the reaction product. The resulting <001> dislocation demonstrates remarkable stability and transforms into a <001> vacancy-type dislocation loop under strain. These vacancy-type dislocation loops can accumulate during continuous deformation and dislocation reactions, serving as precursors for the initiation of structural damage, such as cracking and blistering. Our findings highlight the pivotal role of hydrogen in dislocation reactions, uncover a novel defect accumulation mechanism crucial for interpreting recent experimental observations, and represent a significant advance in understanding hydrogen-induced damage in bcc metals.

cond-mat.mtrl-sci↗

arXiv2024

Doping-free Janus homojunction solar cell with efficiency exceeding 23%

Photovoltaic solar cell is one of the main renewable energy sources, and its power conversion efficiency (PCE) is improved by employing doping or heterojunction to reduce the photogenerated carrier recombination. Here, we propose a doping-free homojunction solar cell utilizing two-dimensional Janus semiconductors to achieve high PCE. Thanks to the intrinsic dipole of Janus structure, doping-free Janus homojunction has naturally not only a type-II band alignment to promote the photoexciton dissociation, but also a smaller effective bandgap to enhance light absorption. More importantly, the intrinsic electric field across the Janus structure will drive photoinduced electron and hole transfer from the interface to the opposite transport layers respectively, significantly enhancing the efficiency of carrier separation and transport. We illustrate the concept in titanium-based Janus monolayer homojunction, where the theoretically observed PCE reaches 23.22% of TiSSe homojunction. Our work opens a novel avenue to design low-cost, high-efficiency solar cells.

physics.app-ph↗

arXiv2024

Enhancing the Prediction of Glass Dynamics by Incorporating the Direction of Deviation from Equilibrium Positions

Elucidating the intricate relationship between the structure and dynamics in the context of the glass transition has been a persistent challenge. Machine learning (ML) has emerged as a pivotal tool, offering novel pathways to predict dynamic behaviors from structural descriptors. Notably, recent research has highlighted that the distance between the initial particle positions between the equilibrium positions substantially enhances the prediction of glassy dynamics. However, these methodologies have been limited in their ability to capture the directional aspects of these deviations from the equilibrium positions, which are crucial for a comprehensive understanding of the complex particle interactions within the cage dynamics. Therefore, this paper introduces a novel structural parameter: the vectorial displacement of particles from their initial configuration to their equilibrium positions. Recognizing the inadequacy of current ML models in effectively handling such vectorial parameters, we have developed an Equivariance-Constrained Invariant Graph Neural Network (EIGNN). This innovative model not only bolsters the descriptive capacity of conventional rotation-invariant models but also streamlines the computational demands associated with rotation-equivariant graph neural networks. Our rigorous experimental validation on 3D glassy system from GlassBench dataset has yielded compelling evidence that the EIGNN model significantly enhance the correlation between structural representation and dynamic properties.

cond-mat.soft↗

arXiv2024

Symmetry-breaking-induced giant Stark effect in 2D Janus materials

Symmetry breaking generally induce exotic physical properties, particularly for low-dimensional materials. Herein we demonstrate that symmetry breaking induces a giant Stark effect in 2D Janus materials using group IV-V monolayers with a four-atom-layer structure as a model system, which are constructed by Ge and As element substitution of symmetrical SnSb monolayer. A linear giant Stark effect is found in Janus semiconductor monolayers, as verified by the band gap variation up to 134 meV of Sn2SbAs monolayer, which is 30 times larger than that of SnSb monolayer (4 meV) when the applied electric field is increased from -0.30 to 0.30 V/Å. By considering the induced electronic field, we propose a generalized and effective formula that efficiently determines the band gap variation owing to Stark effect. The calculated results from proposed formula are well agreement with those from DFT-HSE06 functional. The giant Stark effect is originated from the large spatial separation of centers of the conduction band minimum and valence band maximum states of Janus structure due to its intrinsic potential gradient. The wide-range tuning of band gap under electronic field shows potential applications of 2D Janus materials in optoelectronic devices.

physics.app-ph↗

arXiv2024

Towards interpreting the thermally activated $β$ dynamics in metallic glass with the structural constraint neural network

Unraveling the structural factors influencing the dynamics of amorphous solids is crucial. While deep learning aids in navigating these complexities, transparency issues persist. Inspired by the successful application of prototype neural networks in the field of image analysis, this study introduces a new machine-learning approach to tackle the interpretability challenges faced in glassy research. Distinguishing from traditional machine learning models that only predict dynamics from the structural input, the adapted neural network additionally tries to learn structural prototypes under various dynamic patterns in the training phase. Such learned structural constraints can serve as a breakthrough in explaining how structural differences impact dynamics. We further use the proposed model to explore the correlation between the local structure and activation energy in the CuZr metallic glass. Building upon this interpretable model, we demonstrated significant structural differences among particles with distinct activation energies. The insights gained from this analysis serve as a data-driven solution for unraveling the origins of the structural heterogeneity in amorphous alloys, offering a valuable contribution to the understanding the amorphous materials.

cond-mat.soft↗

arXiv2023

Correlation between spin state and activity for hydrogen evolution

Spin plays a key role in physical and chemical reactions, such as oxygen evolution and hydrogen evolution reactions (OER/HER); but the spin-activity correlation has remained unclear. Based on a transition metal (TM)-doped PtN2 monolayer model with a well-defined spin center as adsorption site, we here reveal that only active spin state can enhance the strength of hydrogen adsorption, while inert spin state offers very little influence. Specifically, the unpaired electron along the out-of-plane direction such as in dZ2 orbital, acting as an active spin state, will strongly hybridize with hydrogen, resulting in enhanced hydrogen binding energy because dZ2 orbital is just enough to accommodate two electrons to form a bonding orbital. While the in-plane unpaired electron such as in dX2-Y2 orbital, plays a negligible role in adsorbing hydrogen atom. This is verified by a series of single atom catalysts comprising of PtN2 monolayer by replacing Pt atom with a TM (Fe, Co, Ni, Ru, Rh, Pd, Os, or Ir) atom, or subsequent adsorbing a Cl atom. One of the most promising materials is Pd@PtN2-Cl that offers superior HER activity, even better than pure Pt. This work uncovers the nature of spin-activity correlation, thus paving the way for the design of high-performance catalysts through spin-engineering.

cond-mat.mtrl-sci↗

arXiv2023

Equilibrium distribution and diffusion of mixed hydrogen-methane gas in gravity field

Repurposing existing natural gas pipelines is a promising solution for large-scale transportation of mixed hydrogen-methane gas. However, it remains debatable whether gravitational stratification can notably affect hydrogen partial pressure in the gas mixture. To address this issue, we combined molecular dynamics simulation with thermodynamic and diffusion theories. Our study systematically examined the equilibrium distribution of hydrogen-methane mixtures in gravity fields. We demonstrated that partial pressures of both gases decrease with altitude, with hydrogen showing slower decrease due to its smaller molar mass. As a result, the volume fraction of hydrogen is maximized at the top end of pipes. The stratification is more favorable at low temperature and large altitude drops, with notable gas stratification only occurring at extremely large drops in altitude, being generally negligible even at a drop of 1500 m. Furthermore, we showed that the diffusion time required to achieve the equilibrium distribution is proportional to gas pressure and the square of pipeline height. This requires approximately 300 years for a 1500 m pipeline at 1 bar. Therefore, temporary interruptions in pipeline gas transportation will not cause visible stratification. Our work clarifies the effect of gravity on hydrogen-methane gas mixtures and provides quantitative insights into assessing the stratification of gas mixtures in pipelines.

cond-mat.stat-mech↗

arXiv2022

Symmetry-breaking-induced multifunctionalities of two-dimensional chromium-based materials for nanoelectronics and clean energy conversion

Structural symmetry-breaking that could lead to exotic physical properties plays a crucial role in determining the functions of a system, especially for two-dimensional (2D) materials. Here we demonstrate that multiple functionalities of 2D chromium-based materials could be achieved by breaking inversion symmetry via replacing Y atoms in one face of pristine CrY (Y=P, As, Sb) monolayers with N atoms, i.e., forming Janus Cr2NY monolayers. The functionalities include spin-gapless, very low work function, inducing carrier doping and catalytic activity, which are predominately ascribed to the large intrinsic dipole of Janus Cr2NY monolayers, making them having great potentials in various applications. Specifically, Cr2NSb is found to be a spin-gapless semiconductor, Cr2NP and Cr2NHPF could simultaneously induce n- and p-type carrier doping for two graphene sheets with different concentrations (forming intrinsic p-n vertical junction), and Cr2NY exhibits excellent electrocatalytic hydrogen evolution activity, even superior to benchmark Pt. The results confirm that breaking symmetry is a promising approach for the rational design of multifunctional 2D materials.

physics.comp-ph↗

arXiv2021

Pattern formation during nonequilibrium crystallization by classical-density-functional-based approach

Solidification pattern during nonequilibrium crystallization is among the most important microstructures in the nature and technical realms. Phase field crystal (PFC) model could simulate the pattern formation during equilibrium crystallization at atom scale, but cannot grasp the nonequilibrium ones due to the absence of proper elastic-relaxation time scale. In this work, we propose a minimal classical-density-functional-theory-based model for crystal growth in supercooled liquid. Growth front nucleation (GFN) and various nonequilibrium patterns, including the faceting growth, spherulite, dendrite and the columnar-to-equiaxed transition (CET) among others, are grasped at atom scale. It is amazing that, except for undercooling and seed spacing, seed distribution is key factor that determines the CET. Overall, two-stage growth process, i.e., the diffusion-controlled growth and the GFN-dominated growth, are identified. But, compared with the second stage, the first stage becomes too short to be noticed under the high undercooling. The distinct feature for the second stage is the dramatic increments of dislocations, which explains the amorphous nucleation precursor in the supercooled liquid. Transition time between the two stages at different undercooling are investigated. Crystal growth of BCC structure further confirms our conclusions.

cond-mat.mtrl-sci↗

arXiv2020

Algorithm for generating irreducible site-occupancy configurations

Generating irreducible site-occupancy configurations by taking advantage of crystal symmetry is a ubiquitous method for accelerating of disordered structure prediction, which plays an important role in condensed matter physics and material science. Here, we present a new algorithm for generating irreducible site-occupancy configurations, that works for arbitrary parent cell with any supercell expansion matrix, and for any number of atom types with arbitrary stoichiometry. The new algorithm identifies the symmetrically equivalent configurations by searching the space group operations of underlying lattice and building the equivalent atomic matrix based on it. Importantly, an integer representation of configurations can greatly accelerate the speed of elimination of duplicate configurations, resulting into a linear scale of run time with the number of irreducible configurations that finally found. Moreover, based on our new algorithm, we write the corresponding code named as disorder in FORTRAN programming language, and the performance test results show that the time efficiency of our disorder code is superior to that of other related codes (supercell, enumlib and SOD).

physics.comp-ph↗