arXiv subjects

Wei Ting Chen

Publications and source records attributed to Wei Ting Chen.

7 recordsLinked to original sources

arXiv2026

Compact single-shot ranging and near-far imaging using metasurfaces

We present a metasurface imaging system capable of simultaneously capturing two images at close range (1-2~cm) and an additional image at long range (about 40~cm) on a shared photosensor. The close-range image pair focuses at 1.4~cm and 2.0~cm, respectively, which forms a focal stack, enabling passive ranging with an accuracy of $\pm$1~mm from 12~mm to 20~mm through a computationally efficient depth-from-defocus algorithm for a simplified scenario. The entire system is compact, with a total track length of 15~mm, making it suitable for seamless integration into edge platforms for defense and other resource-constrained applications.

eess.IV↗

arXiv2025

Scalable freeform optimization of wide-aperture 3D metalenses by zoned discrete axisymmetry

We introduce a novel framework for design and optimization of 3D freeform metalenses that attains nearly linear scaling of computational cost with diameter, by breaking the lens into a sequence of radial "zones" with $n$-fold discrete axisymmetry, where $n$ increases with radius. This allows vastly more design freedom than imposing continuous axisymmetry, while avoiding the compromises of the locally periodic approximation (LPA) or scalar diffraction theory. Using a GPU-accelerated finite-difference time-domain (FDTD) solver in cylindrical coordinates, we perform full-wave simulation and topology optimization within each supra-wavelength zone. We validate our approach by designing millimeter and centimeter-scale, poly-achromatic, 3D freeform metalenses which outperform the state of the art. By demonstrating the scalability and resulting optical performance enabled by our "zoned discrete axisymmetry" (ZDA) and supra-wavelength domain decomposition, we highlight the potential of our framework to advance large-scale meta-optics and next-generation photonic technologies.

physics.optics↗

arXiv2019

Semiconductor ring laser frequency combs induced by phase turbulence

Semiconductor ring lasers are miniaturized devices that operate on clockwise and counterclockwise modes. These modes are not coupled in the absence of intracavity reflectors, which prevents the formation of a standing wave in the cavity and, consequently, of a population inversion grating. This should inhibit the onset of multimode emission driven by spatial hole burning. Here we show that, despite this notion, ring quantum cascade lasers inherently operate in phase-locked multimode states, that switch on and off as the pumping level is progressively increased. By rewriting the master equation of lasers with fast gain media in the form of the complex Ginzburg-Landau equation, we show that ring frequency combs stem from a phase instability---a phenomenon also known in superconductors and Bose-Einstein condensates. The instability is due to coupling of the amplitude and phase modulation of the optical field in a semiconductor laser, which plays the role of a Kerr nonlinearity, highlighting a connection between laser and microresonator frequency combs.

physics.optics↗

arXiv2018

A broadband achromatic polarization-insensitive metalens consisting of anisotropic nanostructures

Metasurfaces have attracted widespread attention due to an increasing demand of compact and wearable optical devices. For many applications, polarization-insensitive metasurfaces are highly desirable and appear to limit the choice of their constituent elements to isotropic nanostructures. This greatly restricts the degrees of geometric parameters available in designing each nanostructure. Here, we demonstrate a polarization-insensitive metalens using otherwise anisotropic nanofins which offer additional control over the dispersion and phase of the output light. As a result, we can render a metalens achromatic and polarization-insensitive across nearly the entire visible spectrum from wavelength 460 nm to 700 nm, while maintaining diffraction-limited performance. The metalens is comprised of just a single layer of TiO2 nanofins and has a numerical aperture of 0.2 with a diameter of 26.4 um. The generality of our polarization-insensitive design allows it to be implemented in a plethora of other metasurface devices with applications ranging from imaging to virtual/augmented reality.

physics.optics↗

arXiv2017

Phase and dispersion engineering of metalenses: broadband achromatic focusing and imaging in the visible

Metasurfaces have the potential to miniaturize and improve the performance of any optical element, with applications spanning telecommunications, computing and wearable optics. However, the ability to retain functionality over a continuous, broad range of wavelengths is essential for their widespread adoption. So far, efforts to achieve this have been limited to either a reflection configuration or operation at wavelengths other than the visible. Here, we show that by judicious choice of nanostructures, one can independently control both the phase and group delay, leading to broadband transmissive achromatic metalenses and metalenses with tunable dispersion across the visible spectrum. We demonstrate diffraction-limited broadband focusing and achromatic imaging using metalenses across wavelengths from 470 nm to 670 nm, with focal length change of a few percent across this 200 nm bandwidth. This approach requires only a single layer metasurface whose thickness is on the wavelength scale, and does not involve spatial multiplexing or cascading.

physics.optics↗

arXiv2016

Planar Lenses at Visible Wavelengths

Sub-wavelength resolution imaging requires high numerical aperture (NA) lenses, which are bulky and expensive. Metasurfaces allow the miniaturization of conventional refractive optics into planar structures. We show that high-aspect-ratio titanium dioxide metasurfaces can be fabricated and designed as meta-lenses with NA = 0.8. Diffraction-limited focusing is demonstrated at wavelengths of 405 nm, 532 nm, and 660 nm with corresponding efficiencies of 86%, 73%, and 66%. The meta-lenses can resolve nanoscale features separated by sub-wavelength distances and provide magnification as high as 170x with image qualities comparable to a state-of-the-art commercial objective. Our results firmly establish that meta-lenses can have widespread applications in laser-based microscopy, imaging, and spectroscopy.

physics.optics↗

arXiv2016

Integrated Plasmonic Metasurfaces for Spectropolarimetry

Plasmonic metasurfaces enable simultaneous control of the phase, momentum, amplitude and polarisation of light and hence promise great utility in realisation of compact photonic devices. In this paper, we demonstrate a novel chip-scale device suitable for simultaneous polarisation and spectral measurements through use of six integrated plasmonic metasurfaces (IPMs), which diffract light with a given polarisation state and spectral component into well-defined spatial domains. Full calibration and characterisation of our device is presented, whereby good spectral resolution and polarisation accuracy over a wavelength range of 500-700~nm is shown. Functionality of our device in a Müller matrix modality is demonstrated through determination of the polarisation properties of a commercially available variable waveplate. Our proposed IPM is robust, compact and can be fabricated with a single photolithography step, promising many applications in polarisation imaging, quantum communication and quantitative sensing.

physics.optics↗