SearcharxivSearch

arXiv subjects

Wei Zhi

Publications and source records attributed to Wei Zhi.

6 recordsLinked to original sources

GeneMamba: An Efficient and Effective Foundation Model on Single Cell Data

Single-cell RNA sequencing (scRNA-seq) enables high-resolution analysis of cellular heterogeneity, but its complexity, which is marked by high dimensionality, sparsity, and batch effects, which poses major computational challenges. Transformer-based models have made significant advances in this domain but are often limited by their quadratic complexity and suboptimal handling of long-range dependencies. In this work, we introduce GeneMamba, a scalable and efficient foundation model for single-cell transcriptomics built on state space modeling. Leveraging the Bi-Mamba architecture, GeneMamba captures bidirectional gene context with linear-time complexity, offering substantial computational gains over transformer baselines. The model is pretrained on nearly 30 million cells and incorporates biologically informed objectives, including pathway-aware contrastive loss and rank-based gene encoding. We evaluate GeneMamba across diverse tasks, including multi-batch integration, cell type annotation, and gene-gene correlation, demonstrating strong performance, interpretability, and robustness. These results position GeneMamba as a practical and powerful alternative to transformer-based methods, advancing the development of biologically grounded, scalable tools for large-scale single-cell data analysis.

cs.CL

MuonSLab: A plastic scintillator based detector for muon measurement in the deep ocean

Atmospheric muons are important probes for studying primary cosmic rays and extensive air showers. Additionally, they constitute a significant background for many underground and deep-sea neutrino experiments, such as TRopIcal DEep-sea Neutrino Telescope (TRIDENT). Understanding the muon flux at various depths in the deep sea is essential for validating TRIDENT simulations and guiding the development of optimized trigger strategies. This paper introduces a novel device based on plastic scintillalors and silicon photomultipliers (SiPMs) named MuonSLab, which is designed to measure muon flux in the deep sea and has the potential to be extended to other atmospheric muon property measurements. We discuss the design and instrumentation of MuonSLab and present results from several muon flux measurements, demonstrating its sensitivity to muon detection and its stability during operations across multiple locations.

hep-ex

Design of High-speed readout electronics for the DarkSHINE electromagnetic calorimeter

The DarkSHINE experiment aims to search for dark photons by measuring the energy loss of the electrons recoiled from fixed-target. Its electromagnetic calorimeter is primarily responsible for accurately reconstructing the energy of the recoil electrons and bremsstrahlung photons. The performance of the electromagnetic calorimeter is crucial, as its energy measurement precision directly determines the sensitivity to the search for dark photons. The DarkSHINE electromagnetic calorimeter uses LYSO crystals to form a fully absorptive electromagnetic calorimeter. It utilizes SiPMs to detect scintillation light in the crystals, and its readout electronics system deduces the deposited energy in the crystals by measuring the number of photoelectric signals generated by the SiPMs. The DarkSHINE electromagnetic calorimeter aims to operate at an event rate of 1-10 MHz, detecting energies ranging from 1 MeV to 1 GeV. To meet the requirements of high energy measurement precision, high event rate, and large dynamic range, we have researched and designed a readout electronics system based on dual-channel high-speed ADCs and a customized DAQ. The front-end amplification part of this system uses low-noise trans-impedance amplifiers to achieve high-precision waveform amplification. It successfully achieves a dynamic range up to a thousandfold through a double-gain readout scheme. The digital part uses 1 GSPS high-speed ADCs to achieve non-dead-time, high-precision waveform digitization. The DAQ part uses JESD204B high-speed serial protocol to read out the signal from ADC, and transmit it to PC software for processing and storage. Test results show a signal-to-noise ratio greater than 66 dBFS and an ENOB greater than 10.6 bits. Energy spectra measurements have been conducted using LYSO crystals and SiPMs, and an energy resolution of 5.96% at the 2.6 MeV gamma peak of Th-232 has been achieved.

physics.ins-det

A camera system for real-time optical calibration of water-based neutrino telescopes

Calibrating the optical properties within the detection medium of a neutrino telescope is crucial for determining its angular resolution and energy scale. For the next generation of neutrino telescopes planned to be constructed in deep water, such as the TRopIcal DEep-sea Neutrino Telescope (TRIDENT), there are additional challenges due to the dynamic nature and potential non-uniformity of the water medium. This necessitates a real-time optical calibration system distributed throughout the large detector array. This study introduces a custom-designed CMOS camera system equipped with rapid image processing algorithms, providing a real-time optical calibration method for TRIDENT and other similar projects worldwide. In September 2021, the TRIDENT Pathfinder experiment (TRIDENT Explorer, T-REX for short) successfully deployed this camera system in the West Pacific Ocean at a depth of 3420 meters. Within 30 minutes, about 3000 images of the T-REX light source were captured, allowing for the in-situ measurement of seawater attenuation and absorption lengths under three wavelengths. This deep-sea experiment for the first time showcased a technical demonstration of a functioning camera calibration system in a dynamic neutrino telescope site, solidifying a substantial part of the calibration strategies for the future TRIDENT project.

physics.ins-det

Front-end electronics development of large-area SiPM arrays for high-precision single-photon time measurement

TRopIcal DEep-sea Neutrino Telescope (TRIDENT) plans to incorporate silicon photomultipliers (SiPMs) with superior time resolution in addition to photomultiplier tubes (PMTs) into its detection units, namely hybrid Digital Optical Modules (hDOMs), to improve its angular resolution. However, the time resolution significantly degrades for large-area SiPMs due to the large detector capacitance, posing significant challenges for the readout electronics of SiPMs in hDOM. We analyzed the influences of series and parallel connections when constructing a large-area SiPM array and designed a series-parallel connection SiPM array with differential output. We also designed a high-speed pre-amplifier based on transformers (MABA-007159) and radio frequency amplifiers (BGA2803), and an analog multi-channel summing circuit based on operational amplifiers (LMH6629). We measured the single photon time resolution (SPTR) of a $4\times4$ SiPM (Hamamatsu S13360-3050PE) array ($12\times12~\mathrm{mm}^2$) of approximately 300 ps FWHM. This front-end readout design enables the large-area SiPM array to achieve high-precision single photon time measurement in one readout channel.

physics.ins-det

Simulation study on the optical processes at deep-sea neutrino telescope sites

The performance of a large-scale water Cherenkov neutrino telescope relies heavily on the transparency of the surrounding water, quantified by its level of light absorption and scattering. A pathfinder experiment was carried out to measure the optical properties of deep seawater in South China Sea with light-emitting diodes (LEDs) as light sources, photon multiplier tubes (PMTs) and cameras as photon sensors. Here, we present an optical simulation program employing the Geant4 toolkit to understand the absorption and scattering processes in the deep seawater, which helps to extract the underlying optical properties from the experimental data. The simulation results are compared with the experimental data and show good agreements. We also verify the analysis methods that utilize various observables of the PMTs and the cameras with this simulation program, which can be easily adapted by other neutrino telescope pathfinder experiments and future large-scale detectors.

astro-ph.IM