arXiv subjects

Wei-Cheng Kong

Publications and source records attributed to Wei-Cheng Kong.

15 recordsLinked to original sources

arXiv2026

Routing Codes: High-Rate Quantum LDPC Codes with Short, Parallel Non-Local Connectivity

Quantum low-density parity-check (qLDPC) codes are promising candidates for realizing large-scale fault-tolerant quantum computing. Although many codes with favorable theoretical parameters have been developed, their practical adoption must take hardware implementability into account. For mainstream quantum platforms such as superconductors and neutral atoms, the connectivity, the length of non-local couplings, and the complexity of wiring or atom rearrangement are key factors that dictate the difficulty of hardware realization. Here, we propose a new family of qLDPC codes, termed routing codes. Within this family, we find explicit instances whose encoding rates are competitive to those of bivariate bicycle (BB) codes, while systematically reducing qubit connectivity, shortening the length of non-local couplings, and, crucially, making all non-local couplings mutually parallel. This parallelism translates into quantifiable benefits, substantially reducing wiring crossings in superconducting multi-layer architectures and simplifying the scheduling of atom movement in neutral-atom arrays. The weight-7 routing codes maintain a high threshold of 0.7\% and reduce the physical qubit overhead by approximately a factor of 8, compared to surface codes achieving a same logical error rate. Further increasing the weight to 11 yields a [[200, 24, 14]] and [[200, 16, 17]] codes with an encoding rate over 23 times that of the surface code, at the cost of a higher logical error rate. These results establish routing codes as a hardware-centric qLDPC family that bridges the gap between theoretical optimality and near-term physical feasibility.

quant-ph↗

arXiv2026

Adaptive Deformation of Color Code in Square Lattices with Defects

Quantum error correction is a crucial technology for fault tolerant quantum computing. On superconducting platforms, hardware defects in large scale quantum processors can disrupt the regular lattice structure of topological codes and impair their error correction capabilities. Although defect adaptive methods for surface codes have been extensively studied, other topological codes such as color codes still lack a systematic framework for handling defects. To address this issue, we propose a universal superstabilizer scheme applicable to data qubit defects in arbitrary stabilizer codes. Based on this scheme, we develop concrete repair methods for isolated defects of both internal data qubits and ancilla qubits in color codes defined on square lattices. Furthermore, for ancilla qubit defects, we present two optimization schemes. One scheme reuses neighboring ancilla qubits, and the other employs iSWAP gates. Unlike conventional approaches that directly disable neighboring data qubits and thus cause resource waste, both of our schemes avoid such waste and consequently achieve a lower logical error rate.Integrating the above techniques, we construct a comprehensive defect adaptive architecture for color codes to handle various defect clusters. We also show that our scheme supports a full transversal Clifford gate set and lattice surgery operations. These results provide a systematic theoretical pathway for deploying robust and low overhead color codes on defective quantum hardware.

quant-ph↗

arXiv2026

Experimental robustness benchmarking of quantum neural networks on a superconducting quantum processor

Quantum machine learning (QML) models, like their classical counterparts, are vulnerable to adversarial attacks, hindering their secure deployment. Here, we report the first systematic experimental robustness benchmark for 20-qubit quantum neural network (QNN) classifiers executed on a superconducting processor. Our benchmarking framework features an efficient adversarial attack algorithm designed for QNNs, enabling quantitative characterization of adversarial robustness and robustness bounds. From our analysis, we verify that adversarial training reduces sensitivity to targeted perturbations by regularizing input gradients, significantly enhancing QNN's robustness. Additionally, our analysis reveals that QNNs exhibit superior adversarial robustness compared to classical neural networks, an advantage attributed to inherent quantum noise. Furthermore, the empirical upper bound extracted from our attack experiments shows a minimal deviation ($3 \times 10^{-3}$) from the theoretical lower bound, providing strong experimental confirmation of the attack's effectiveness and the tightness of fidelity-based robustness bounds. This work establishes a critical experimental framework for assessing and improving quantum adversarial robustness, paving the way for secure and reliable QML applications.

quant-ph↗

arXiv2025

Low-Overhead and High-Fidelity Preparation of Logical Non-Clifford States with Multi-Level Transversal Injection

Rotation gates are widely used in various quantum algorithms. To implement fault-tolerant rotation gates, state distillation or gate synthesis is typically employed. However, the overhead of these schemes scales rapidly with increasing Clifford hierarchy levels and required fidelity, limiting their use in large-scale quantum algorithms. In this letter, we propose a method termed multi-level transversal injection (MLTI) for preparing rotation states at arbitrary Clifford hierarchy levels, which achieves high fidelity while significantly reducing overhead compared to previous methods. Unlike the linear cost scaling of state distillation, the overhead of MLTI drops with Clifford hierarchy levels and then plateaus at higher levels, slashing the required space-time volume by up to several orders of magnitude. Additionally, we introduce a method for eliminating the off-diagonal terms of rotation states without extra overhead, unifying the metrics of infidelity and trace distance. These results render the overhead for high-precision rotation gates no longer prohibitive, and thus bring the broad adoption of large-scale quantum algorithms a critical step closer to reality.

quant-ph↗

arXiv2025

Remote entanglement generation via enhanced quantum state transfer

Achieving robust and scalable remote quantum entanglement is a fundamental challenge for the development of distributed quantum networks and modular quantum computing systems. Along this, perfect state transfer (PST) and fractional state transfer (FST) have emerged as promising schemes for quantum state transfer and remote entanglement generation using only nearest-neighbor couplings. However, the current implementations suffer from quantum loss and limited parameter tunability. In this work, we propose a new quantum state transfer scheme based on a zig-zag configuration, which introduces a controlling parameter for PST and FST. We show that this new parameter can suppress the population in the intermediate qubits, thereby reducing losses. We experimentally demonstrate the dynamics of different configurations on a superconducting quantum processor, achieving an $18\%$ reduction in error for remote Bell state generation in a 1D ($1\times5$) qubit chain, and exhibit robustness against certain types of noise. Then we extend our approach to a 2D network, successfully generating a W state among the four corner qubits. These results highlight the potential of our enhanced quantum state transfer scheme for scalable and noise-resilient quantum communication and computing.

quant-ph↗

arXiv2025

Demonstrating Coherent Quantum Routers for Bucket-Brigade Quantum Random Access Memory on a Superconducting Processor

Quantum routers (QRouters) are essential components of bucket-brigade quantum random access memory (QRAM), enabling quantum applications such as Grover's search and quantum machine learning. Despite significant theoretical advances, achieving scalable and coherent QRouters experimentally remains challenging. Here, we demonstrate coherent quantum routers using a superconducting quantum processor, laying a practical foundation for scalable QRAM systems. The quantum router at the core of our implementation utilizes the transition composite gate (TCG) scheme, wherein auxiliary energy levels temporarily mediate conditional interactions, substantially reducing circuit depth compared to traditional gate decompositions. Moreover, by encoding routing addresses in the non-adjacent qutrit states $|0\rangle$ and $|2\rangle$, our design inherently enables eraser-detection capability, providing efficient post-selection to mitigate routing errors. Experimentally, we achieve individual QRouter fidelities up to 95.74%, and validate scalability through a two-layer quantum routing network achieving an average fidelity of 82.40%. Our results represent a significant advancement in quantum routing technology, providing enhanced fidelity, built-in error resilience, and practical scalability crucial for the development of future QRAM and large-scale quantum computing architectures.

quant-ph↗

arXiv2025

Realizing Scalable Conditional Operations through Auxiliary Energy Levels

In the noisy intermediate-scale quantum (NISQ) era, flexible quantum operations are essential for advancing large-scale quantum computing, as they enable shorter circuits that mitigate decoherence and reduce gate errors. However, the complex control of quantum interactions poses significant experimental challenges that limit scalability. Here, we propose a transition composite gate scheme based on transition pathway engineering, which digitally implements conditional operations with reduced complexity by leveraging auxiliary energy levels. Experimentally, we demonstrate the controlled-unitary (CU) family and its applications. In entangled state preparation, our CU gate reduces the circuit depth for three-qubit Greenberger-Horne-Zeilinger (GHZ) and W states by approximately 40-44% compared to circuits using only CZ gates, leading to fidelity improvements of 1.5% and 4.2%, respectively. Furthermore, with a 72% reduction in circuit depth, we successfully implement a quantum comparator-a fundamental building block for quantum algorithms requiring conditional logic, which has remained experimentally challenging due to its inherent circuit complexity. These results demonstrate the scalability and practicality of our scheme, laying a solid foundation for the implementation of large-scale quantum algorithms in future quantum processors.

quant-ph↗

arXiv2024

HiMA: Hierarchical Quantum Microarchitecture for Qubit-Scaling and Quantum Process-Level Parallelism

Quantum computing holds immense potential for addressing a myriad of intricate challenges, which is significantly amplified when scaled to thousands of qubits. However, a major challenge lies in developing an efficient and scalable quantum control system. To address this, we propose a novel Hierarchical MicroArchitecture (HiMA) designed to facilitate qubit scaling and exploit quantum process-level parallelism. This microarchitecture is based on three core elements: (i) discrete qubit-level drive and readout, (ii) a process-based hierarchical trigger mechanism, and (iii) multiprocessing with a staggered triggering technique to enable efficient quantum process-level parallelism. We implement HiMA as a control system for a 72-qubit tunable superconducting quantum processing unit, serving a public quantum cloud computing platform, which is capable of expanding to 6144 qubits through three-layer cascading. In our benchmarking tests, HiMA achieves up to a 4.89x speedup under a 5-process parallel configuration. Consequently, to the best of our knowledge, we have achieved the highest CLOPS (Circuit Layer Operations Per Second), reaching up to 43,680, across all publicly available platforms.

cs.AR↗

arXiv2024

Enabling Large-Scale and High-Precision Fluid Simulations on Near-Term Quantum Computers

Quantum computational fluid dynamics (QCFD) offers a promising alternative to classical computational fluid dynamics (CFD) by leveraging quantum algorithms for higher efficiency. This paper introduces a comprehensive QCFD method, including an iterative method "Iterative-QLS" that suppresses error in quantum linear solver, and a subspace method to scale the solution to a larger size. We implement our method on a superconducting quantum computer, demonstrating successful simulations of steady Poiseuille flow and unsteady acoustic wave propagation. The Poiseuille flow simulation achieved a relative error of less than $0.2\%$, and the unsteady acoustic wave simulation solved a 5043-dimensional matrix. We emphasize the utilization of the quantum-classical hybrid approach in applications of near-term quantum computers. By adapting to quantum hardware constraints and offering scalable solutions for large-scale CFD problems, our method paves the way for practical applications of near-term quantum computers in computational science.

physics.comp-ph↗

arXiv2023

Experimental Implementation of Short-Path Non-adiabatic Geometric Gates in a Superconducting Circuit

The non-adiabatic geometric quantum computation (NGQC) has attracted a lot of attention for noise-resilient quantum control. However, previous implementations of NGQC require long evolution paths that make them more vulnerable to incoherent errors than their dynamical counterparts.In this work, we experimentally realize a universal short-path non-adiabatic geometric gate set (SPNGQC) with a 2-times shorter evolution path on a superconducting quantum processor. Characterizing with both quantum process tomography and randomized benchmarking methods, we report an average single-qubit gate fidelity of 99.86% and a two-qubit gate fidelity of 97.9%. Additionally, we demonstrate superior robustness of single-qubit SP-NGQC gate to Rabi frequency error in some certain parameter space by comparing their performance to those of the dynamical gates and the former NGQC gates.

quant-ph↗

arXiv2021

Anti-crosstalk high-fidelity state discrimination for superconducting qubits

Measurement for qubits plays a key role in quantum computation. Current methods for classifying states of single qubit in a superconducting multi-qubit system produce fidelities lower than expected due to the existence of crosstalk, especially in case of frequency crowding. Here, We make the digital signal processing (DSP) system used in measurement into a shallow neural network and train it to be an optimal classifier to reduce the impact of crosstalk. The experiment result shows the crosstalk-induced readout error deceased by 100% after a 3-second optimization applied on the 6-qubit superconducting quantum chip.

quant-ph↗

arXiv2021

Special-Purpose Quantum Processor Design

Full connectivity of qubits is necessary for most quantum algorithms, which is difficult to directly implement on Noisy Intermediate-Scale Quantum processors. However, inserting swap gate to enable the two-qubit gates between uncoupled qubits significantly decreases the computation result fidelity. To this end, we propose a Special-Purpose Quantum Processor Design method that can design suitable structures for different quantum algorithms. Our method extends the processor structure from two-dimensional lattice graph to general planar graph and arranges the physical couplers according to the two-qubit gate distribution between the logical qubits of the quantum algorithm and the physical constraints. Experimental results show that our design methodology, compared with other methods, could reduce the number of extra swap gates per two-qubit gate by at least 104.2% on average. Also, our method's advantage over other methods becomes more obvious as the depth and qubit number increase. The result reveals that our method is competitive in improving computation result fidelity and it has the potential to demonstrate quantum advantage under the technical conditions.

quant-ph↗

arXiv2017

Coherent phonon Rabi oscillations with a high frequency carbon nanotube phonon cavity

Phonon-cavity electromechanics allows the manipulation of mechanical oscillations similar to photon-cavity systems. Many advances on this subject have been achieved in various materials. In addition, the coherent phonon transfer (phonon Rabi oscillations) between the phonon cavity mode and another oscillation mode has attracted many interest in nano-science. Here we demonstrate coherent phonon transfer in a carbon nanotube phonon-cavity system with two mechanical modes exhibiting strong dynamical coupling. The gate-tunable phonon oscillation modes are manipulated and detected by extending the red-detuned pump idea of photonic cavity electromechanics. The first- and second-order coherent phonon transfers are observed with Rabi frequencies 591 kHz and 125 kHz, respectively. The frequency quality factor product fQ_m~2=10^12 Hz achieved here is larger thank k_B T_base/h, which may enable the future realization of Rabi oscillations in the quantum regime.

cond-mat.mes-hall↗

arXiv2014

Introduction of DC line structures into a superconducting microwave 3D cavity

We report a technique that can noninvasively add multiple DC wires into a 3D superconducting microwave cavity for electronic devices that require DC electrical terminals. We studied the influence of our DC lines on the cavity performance systematically. We found that the quality factor of the cavity is reduced if any of the components of the electrical wires cross the cavity equipotential planes. Using this technique, we were able to incorporate a quantum dot (QD) device into a 3D cavity. We then controlled and measured the QD transport signal using the DC lines. We have also studied the heating effects of the QD by the microwave photons in the cavity.

cond-mat.mes-hall↗

arXiv2014

Coupling two distant double quantum dots to a microwave resonator

With recent advances in the circuit quantum electrodynamics (cQED) architecture, hybrid systems that couple nano-devices to microwave resonators have been developing rapidly. Here we report an experimental demonstration of two graphene double quantum dots (DQDs) coupled over a distance of up to 60 μm, through a microwave resonator. We jointly measure the two DQDs' coupling to the resonator, which causes a nonlinear response in the resonator reflection amplitude in the vicinity of the degeneracy points of the two DQDs. This phenomenon is explained by the Tavis-Cummings (T-C) mode. We further characterize this nonlocal coupling by measuring the correlation between the DC currents in the two DQDs. This correlation is observed to be strongly dependent on the average photon number in the resonator. Our results explore T-C physics in electronic transport, and also contribute to the study of nonlocal transport and future implementations of remote electronic entanglement.

cond-mat.mes-hall↗