arXiv subjects

Weidi Wang

Publications and source records attributed to Weidi Wang.

7 recordsLinked to original sources

arXiv2024

Time domain analysis of locally resonant elastic metamaterials under impact

The microstructure of a material can be engineered to achieve unique properties not found in nature. Microstructured materials, also known as metamaterials (MMs), can exhibit properties utilizing local resonance and dynamics of their heterogeneous microstructure that are activated below the traditional Bragg limit. In this study, the linear dynamic response of a low-frequency resonant ceramic MM slab is analyzed using the Finite Element Method (FEM) in the time domain. The MM is compared to monolithic slabs and other microstructured designs in terms of stress wave mitigation, peak load retardation, and energy transfer. Simulations are conducted using various boundary conditions and domain sizes to evaluate their influence on the performance. Potential graded slab designs and material damping effects are also discussed and are both shown to reduce the energy transmitted from the impact surface to the opposing surface significantly. The results showed that the MM slabs had superior performance in reducing the peak stress wave and reducing the transfer of energy. This study demonstrates that resonant ceramic MMs are a promising material design with unique and tunable properties that can be used for stress wave mitigation and structural protection applications.

physics.app-ph↗

arXiv2023

Optimization of Graded Metamaterials for Control of Energy Transmission Using a Genetic Algorithm

Optimization of functionally graded metamaterial arrays with a high dimensional and continuous geometric design space is cumbersome and could be accelerated via machine learning tools. Mechanical metamaterials can manipulate acoustic or ultrasonic waves by introducing large dispersive and attenuative effects near their natural frequency. In this work functionally graded structures are designed and optimized to combine the energy attenuation performance of a number of unit cells with varying frequency responses and to reduce the interlayer mismatch effects. Optimization through genetic algorithm avoids the many local minima related to high dimensionality of the design space but requires many iterations. A reduced order model (ROM) is applied that can reproduce the transmission response that is traditionally calculated with FEM, in a fraction of the time. Pairing GA and the ROM together, an array of 6 unit cells (with a total of 18 independent geometric design variables) is optimized to have stop bands with extended width and sharper boundaries. Symmetric functionally graded structures are determined to be optimal geometric configurations. Measured 3D printed features are projected onto the ROM solutions to quantify the effect of printing uncertainty on array performance. Repeatability error of $\pm~20$ $μ$m is determined to reduce the mean depth of the transmission stop band by a factor of $10^2$ and introduce small shifts in center frequency and band width. Proposed methods to improve the resolution of accessible points in the ROM space, reduce sensitivity to geometric uncertainty, and add design freedom include introducing out-of-plane perforations and varying constituent materials using tunable filled resin systems.

physics.app-ph↗

arXiv2023

Reduced Order Modeling of Dynamic Mechanical Metamaterials for Analysis of Infinite and Finite Systems

Dynamic mechanical metamaterials (MMs) are artificial media composed of periodic micro-structures, designed to manipulate wave propagation. Modeling and designing these materials can be computationally demanding due to the broad design space spanned by a range of geometric and material parameters. This work aims to develop a generalized reduced order modeling (ROM) approach for determining MM dynamics in low frequency ranges with accuracy and speed, using a limited number of parameters and small matrices. The MM unit cells are treated as assemblies of structural elements and discrete degrees of freedom, whose effective stiffness and inertia are determined by optimizing energy criteria based on continuum results derived from a small number of eigen-study simulations. This proposed approach offers a parameterized and discretized representation of MM systems, which leads to fast and accurate computation of eigen-study results for periodic arrays of repeating unit cells, as well as dynamic responses for finite-sized arrays. The high computational efficiency and physical accuracy of this method will help to streamline the modeling process and aid in design discovery and optimization, especially in combination with scientific machine learning and data-driven techniques.

physics.app-ph↗

arXiv2022

Exceptional points and scattering of discrete mechanical metamaterials

Exceptional points (EPs) are complex singularities of parametric linear operators where two or more eigenvalues and eigenvectors coalesce. EPs are attracting increasing interest in mechanical metamaterials due to their strong potentials for wave filtering, cloaking, and sensing applications. This work studies the band topology and scattering behaviors near EPs, using discrete models of metamaterial (MM) systems. The questions of existence of EPs and their physical manifestations will be addressed with particular focus on symmetry considerations and scattering behavior. Discrete mass-spring models with adjustable parameters are used here to elucidate the EP-related phenomena in a fundamental form. The transfer and scattering matrices are analyzed to provide practical insights on the restrictions associated with reciprocity and fundamental symmetries. By including complex stiffness in frequency domain as a representation of non-conservative mechanical loss or gain, the MM arrays can be tuned to achieve bi-directional transparency or one-way reflection when operating at the EPs. This analytical study will contribute to the understandings of EPs in mechanical context and the design of micro-structured media for novel applications.

physics.app-ph↗

arXiv2021

Angle-dependent Phononic Dynamics for Deep Learning and Source Localization

In this work, a parameterized eigenvalue problem is analyzed for a phononic array in a 2D stress wave scattering setup, and a corresponding sensing application of this system is proposed to achieve source angle localization. The phononic domain consists of a periodic micro-structured medium, of which the eigen-wavevector band structure and the eigen-modes are exploited. The eigen-modes are naturally angle dependent due to changes in phases and periodic mode shapes determined by the incident angle. Intriguingly, the band exhibits angle-dependent transitions at the exceptional points (EPs) and critical angles (CAs), where the eigenvalues coincide or vanish. Coupled with these transitions, it is found that the eigen-modes switch their energy characteristics and symmetry patterns at these branch points, leading to enhanced angle dependence. Moreover, these eigen-modes also serve as the basis functions of the scattered waves. Therefore, the scattering response of the medium inherently possesses the angle-dependent properties, making this system naturally suitable for sensing applications. An artificial neural network (ANN) is trained with randomly weighted eigen-modes to achieve deep learning of the eigen features and angle dependence. The training data is derived only based on the eigen-modes of the unit cells. Nevertheless, the trained ANN can accurately identify the incident angle of an unknown scattering signal, with minimal side lobe levels and suppressed main lobe width. The ANN shows superior performance in comparison with standard delay-and-sum technique of estimating angle of arrival. The proposed application of ANN and micro-structured media highlights the physical importance of band structure topology and eigen-modes to a technological application, adds extra strength to the existing localization methods, and can be easily enhanced with the fast-growing data-driven techniques.

physics.app-ph↗

arXiv2020

Learning Order Parameters from Videos of Dynamical Phases for Skyrmions with Neural Networks

The ability to recognize dynamical phenomena (e.g., dynamical phases) and dynamical processes in physical events from videos, then to abstract physical concepts and reveal physical laws, lies at the core of human intelligence. The main purposes of this paper are to use neural networks for classifying the dynamical phases of some videos and to demonstrate that neural networks can learn physical concepts from them. To this end, we employ multiple neural networks to recognize the static phases (image format) and dynamical phases (video format) of a particle-based skyrmion model. Our results show that neural networks, without any prior knowledge, can not only correctly classify these phases, but also predict the phase boundaries which agree with those obtained by simulation. We further propose a parameter visualization scheme to interpret what neural networks have learned. We show that neural networks can learn two order parameters from videos of dynamical phases and predict the critical values of two order parameters. Finally, we demonstrate that only two order parameters are needed to identify videos of skyrmion dynamical phases. It shows that this parameter visualization scheme can be used to determine how many order parameters are needed to fully recognize the input phases. Our work sheds light on the future use of neural networks in discovering new physical concepts and revealing unknown yet physical laws from videos.

cs.LG↗

arXiv2018

Reduced order derivation of the two-dimensional band structure of a mixed-mode resonator array

In this paper, the 2D band structure of a mixed-mode metamaterial resonator array for in-plane waves is investigated. The band structure in the interior and on the boundary of the irreducible Brillouin zone as well as 1D dispersion diagrams for different propagation angles are calculated numerically and presented. Additionally, a reduced order analytical method is established to compare and approximate the band structure. The studied metamaterial, with a T-shaped cantilever beam as resonator in its square array repeating unit cells, exhibits branches with mixed P and SV waves except at exactly one angle of propagation. This paper also reports on the occurrence of avoided level crossings, which are related to the existence of exceptional points in the complex domain. A reduced order analytical approach is used that can generate partial (low branches) band structure with relatively little computational effort. The reduced order model agrees well with the numerical results for these low branches and can provide support in mode identification and band sorting. With proper adjustments in parameters, this analytical method will be applicable for other metamaterials that have similar unit cell structure.

physics.app-ph↗