arXiv subjects

Weidong Hu

Publications and source records attributed to Weidong Hu.

15 recordsLinked to original sources

arXiv2026

Measured LWC-Specific Fog Attenuation and Frequency Scaling in Low-THz Channels

Fog can reduce the link margin of terahertz (THz) wireless systems. Earlier channel measurements mainly relied on visibility, and almost no liquid water content (LWC) referenced attenuation coefficients have been reported. This letter reports controlled fog measurements at low-THz frequencies (120, 140, and 160 GHz) over a 22 m channel. LWC is retrieved from a time-aligned droplet size distribution (DSD) and paired with the fog-induced attenuation to obtain the relationship between attenuation and LWC at each frequency. The comparison with ITU-R P.840 is posed as an errors-in-variables problem. This separates the absolute coefficient from its frequency dependence - how the coefficient grows with frequency. Expressed as a power law of frequency, the measured exponent is 1.347, matching the value of 1.343 implied by P.840 at 20 oC. The results provide reference data and a compact scaling law for fog link budgeting at low-THz frequencies.

physics.app-ph↗

arXiv2026

Opportunistic Lower-Terahertz Rainfall Estimation with DSD-Constrained Channel Characterization

Rain-induced attenuation and scattering become significant at terahertz (THz) frequencies, and exploiting this rain sensitivity is necessary both to safeguard link reliability and to enable opportunistic environmental sensing without dedicated instrumentation, a capability that remains largely unvalidated on real outdoor channels above 100 GHz. This article investigates opportunistic rainfall estimation using measured lower-terahertz (THz) channels at 140 and 229 GHz. Outdoor measurements over a 41.5-m rain-exposed path are used to characterize rain-induced attenuation and the rainfall dependence of an effective Rician K-factor. Because the path-representative drop-size distribution (DSD) is unavailable, several propagation-model scenarios based on ITU-R P.838-3 and Mie theory with canonical DSDs are employed to quantify model-form sensitivity. These channel characteristics are then used to generate physics-constrained synthetic received-power sequences for training RainFormer, a compact attention-convolution regression network that combines temporal features with explicit attenuation and fluctuation statistics. Under matched synthetic conditions, RainFormer achieves RMSEs of 0.1782 and 0.2925 mm/h at 140 and 229 GHz, respectively, and outperforms the investigated convolutional and Transformer baselines in most metric-frequency combinations. Direct application to the independent measured dataset produces physically consistent rainfall estimates at 140 GHz and demonstrates that received-power fluctuations provide useful information beyond mean attenuation. The results establish a measurement-informed framework for evaluating lower-THz links as opportunistic rainfall sensors while explicitly accounting for propagation-model uncertainty.

physics.app-ph↗

arXiv2026

Frequency-Selective Rain Attenuation on Terahertz Channels

Rain introduces broadband and frequency-selective attenuation in wideband terahertz (THz) links, making it necessary to identify a compact spectral descriptor that captures how the dominant loss region evolves with rainfall conditions. This article investigates the peak-frequency behavior of rain attenuation by combining Mie theory calculations with one separable laboratory Gaussian drop-size distribution (DSD) and eight outdoor empirical DSD models whose spectral shapes vary with rainfall rate. The analysis compares total loss, absorption, and scattering components, examines the roles of the characteristic DSD scale and representative drop size statistics, and evaluates the effect of temperature on the peak location. The results show that, unlike the fixed-shape laboratory case where the peak frequency remains unchanged with rainfall rate, all outdoor empirical DSD models exhibit a monotonic migration of the attenuation peak toward lower frequencies as rainfall rate increases. This migration follows a quasi-exact inverse scaling with the rainfall-dependent DSD characteristic scale, follows a family-specific asymptotic power law in rainfall rate, and is governed mainly by characteristic drop size, while fixed-temperature dielectric dispersion contributes only secondary corrections in the broad-peak, low-rainfall regime.

physics.app-ph↗

arXiv2026

Near-Field Coupling of Polypropylene Dielectric Waveguide Routed Near PCB Board at Terahertz Frequencies

The growing demand for high-capacity, low-loss short-reach links in highly integrated electronic systems makes it necessary to understand how terahertz (THz) dielectric waveguides behave in realistic PCB-level packaging environments. In this article, we investigate the channel transmission of a 3D-printed polypropylene dielectric waveguide placed near representative PCB substrates. Continuous-wave THz measurements are carried out for bare, fully copper-clad, and periodic copper-trTerahertz (THz) dielectric waveguides are promising physical channels for short-reach interconnects, but their air-clad guided fields may interact with nearby printed-circuit-board (PCB) structures in compact packages. In this work, we experimentally and numerically investigate PCB-proximity-induced excess transmission loss in 3D-printed polypropylene rectangular dielectric waveguides over 220-325 GHz. Continuous-wave transmission measurements are performed for bare FR4, continuous waveguide-facing copper, and periodic copper-trace PCB configurations under controlled clearance and alignment conditions. The results show that direct contact with bare FR4 can induce a frequency-selective high-loss band, which is attributed to phase-matched leakage from the guided waveguide mode into a substrate-supported leaky branch. This finding highlights PCB proximity as a critical layout factor and provides practical guidance for clearance control and metallization design in compact THz dielectric-waveguide packages.ace PCBs with different waveguide-PCB separations, while terahertz time-domain spectroscopy is used to characterize the dielectric properties of the substrate materials.

physics.app-ph↗

arXiv2025

Experimental Characterization and Dynamic Modeling of THz Channels Under Fog Conditions

The terahertz (THz) band is a promising candidate for sixth-generation wireless networks, but its deploymen in outdoor environments is challenged by meteorological phenomena, particularly fog, which imposes variable and difficult-to-predict channel degradation. This article introduces dynamic channel model for the THz band explicitly driven by the time-evolving droplet size distribution (DSD) of fog, integrating real-time microphysical sensing to capture variations in the fog microstructure. Experimental measurements were conducted at 220 GHz and 320 GHz in a controlled fog chamber to achieve quasi-stationary states, and a larger room-scale setup to characterize dynamic, non-stationary fog evolution. The results confirm that channel power loss is overwhelmingly dominated by absorption rather than scattering, validating the use of the computationally efficient Rayleigh approximation below 1 THz. Statistical analysis revealed exceptionally high Rician K-factors, demonstrating that THz channels maintain strong line-of-sight stability even in dense fog. System-level performance analysis shows that degradation in bit error rate is driven by the slow, gradual evolution of the DSD, rather than fast multipath fading. This finding enables the reliable simplification of the THz fog channel into a near-Gaussian channel model with time-varying signal-to-noise ratio. This microphysics-aware approach established here provides the necessary foundation for developing adaptive system designs centered on SNR tracking for robust future THz networks.

physics.app-ph↗

arXiv2024

Waveform-Domain Complementary Signal Sets for Interrupted Sampling Repeater Jamming Suppression

The interrupted-sampling repeater jamming (ISRJ) is coherent and has the characteristic of suppression and deception to degrade the radar detection capabilities. The study focuses on anti-ISRJ techniques in the waveform domain, primarily capitalizing on waveform design and and anti-jamming signal processing methods in the waveform domain. By exploring the relationship between waveform-domain adaptive matched filtering (WD-AMF) output and waveform-domain signals, we demonstrate that ISRJ can be effectively suppressed when the transmitted waveform exhibits waveform-domain complementarity. We introduce a phase-coded (PC) waveform set with waveform-domain complementarity and propose a method for generating such waveform sets of arbitrary code lengths. The performance of WD-AMF are further developed due to the designed waveforms, and simulations affirm the superior adaptive anti-jamming capabilities of the designed waveforms compared to traditional ones. Remarkably, this improved performance is achieved without the need for prior knowledge of ISRJ interference parameters at either the transmitter or receiver stages.

eess.SP↗

arXiv2023

Design of A Single Antenna With Tunable In-Band RCS Null Through Load Impedance Control

Reducing the in-band radar cross section (RCS) of antennas has been a widely concerned problem. However, most of works focus on RCS reduction of antenna arrays, or need to additionally increase the size of a single antenna. Therefore, this work presents a method to control the null of the in-band RCS by changing the load impedance of the antenna without additional aperture. Then, the monostatic and bistatic RCS can be effectively reduced. First, the relationship between the null position and the load impedance is calculated by analyzing the in-band scattering field of the antenna. Second, the performance of RCS null control is verified by the traditional patch antenna, whose operating frequency is designed at 2 GHz. The load impedance of the antenna is controlled by cascading an open circuit stub of different lengths on the feeding line. Simulated results show that the proposed method can tune the null of in-band RCS from 0o to 60o under linear polarized normally incident plane wave. By setting the null reasonably, it can achieve 10 dB reduction for both monostatic and bistatic RCS at the same time. Moreover, the radiation performance of the antenna basically remains unchanged, and the gain is greater than 6.5 dBi. Measured results verify the effectiveness of the design method.

physics.app-ph↗

arXiv2023

Waveform-Domain Adaptive Matched Filtering for Suppressing Interrupted-Sampling Repeater Jamming

The inadequate adaptability to flexible interference scenarios remains an unresolved challenge in the majority of techniques utilized for mitigating interrupted-sampling repeater jamming (ISRJ). Matched filtering system based methods is desirable to incorporate anti-ISRJ measures based on prior ISRJ modeling, either preceding or succeeding the matched filtering. Due to the partial matching nature of ISRJ, its characteristics are revealed during the process of matched filtering. Therefore, this paper introduces an extended domain called the waveform domain within the matched filtering process. On this domain, an adaptive matched filtering model, known as the waveform-domain adaptive matched filtering (WD-AMF), is established to tackle the problem of ISRJ suppression without relying on a pre-existing ISRJ model. The output of the WD-AMF encompasses an adaptive filtering term and a compensation term. The adaptive filtering term encompasses the adaptive integration outcomes in the waveform domain, which are determined by an adaptive weighted function. This function, akin to a collection of bandpass filters, decomposes the integrated function into multiple components, some of which contain interference while others do not. The compensation term adheres to an integrated guideline for discerning the presence of signal components or noise within the integrated function. The integration results are then concatenated to reconstruct a compensated matched filter signal output. Simulations are conducted to showcase the exceptional capability of the proposed method in suppressing ISRJ in diverse interference scenarios, even in the absence of a pre-existing ISRJ model.

eess.SP↗

arXiv2021

Deep Manifold Embedding for Hyperspectral Image Classification

Deep learning methods have played a more and more important role in hyperspectral image classification. However, the general deep learning methods mainly take advantage of the information of sample itself or the pairwise information between samples while ignore the intrinsic data structure within the whole data. To tackle this problem, this work develops a novel deep manifold embedding method(DMEM) for hyperspectral image classification. First, each class in the image is modelled as a specific nonlinear manifold and the geodesic distance is used to measure the correlation between the samples. Then, based on the hierarchical clustering, the manifold structure of the data can be captured and each nonlinear data manifold can be divided into several sub-classes. Finally, considering the distribution of each sub-class and the correlation between different subclasses, the DMEM is constructed to preserve the estimated geodesic distances on the data manifold between the learned low dimensional features of different samples. Experiments over three real-world hyperspectral image datasets have demonstrated the effectiveness of the proposed method.

cs.CV↗

arXiv2020

Statistical Loss and Analysis for Deep Learning in Hyperspectral Image Classification

Nowadays, deep learning methods, especially the convolutional neural networks (CNNs), have shown impressive performance on extracting abstract and high-level features from the hyperspectral image. However, general training process of CNNs mainly considers the pixel-wise information or the samples' correlation to formulate the penalization while ignores the statistical properties especially the spectral variability of each class in the hyperspectral image. These samples-based penalizations would lead to the uncertainty of the training process due to the imbalanced and limited number of training samples. To overcome this problem, this work characterizes each class from the hyperspectral image as a statistical distribution and further develops a novel statistical loss with the distributions, not directly with samples for deep learning. Based on the Fisher discrimination criterion, the loss penalizes the sample variance of each class distribution to decrease the intra-class variance of the training samples. Moreover, an additional diversity-promoting condition is added to enlarge the inter-class variance between different class distributions and this could better discriminate samples from different classes in hyperspectral image. Finally, the statistical estimation form of the statistical loss is developed with the training samples through multi-variant statistical analysis. Experiments over the real-world hyperspectral images show the effectiveness of the developed statistical loss for deep learning.

cs.CV↗

arXiv2019

Diversity in Machine Learning

Machine learning methods have achieved good performance and been widely applied in various real-world applications. They can learn the model adaptively and be better fit for special requirements of different tasks. Generally, a good machine learning system is composed of plentiful training data, a good model training process, and an accurate inference. Many factors can affect the performance of the machine learning process, among which the diversity of the machine learning process is an important one. The diversity can help each procedure to guarantee a total good machine learning: diversity of the training data ensures that the training data can provide more discriminative information for the model, diversity of the learned model (diversity in parameters of each model or diversity among different base models) makes each parameter/model capture unique or complement information and the diversity in inference can provide multiple choices each of which corresponds to a specific plausible local optimal result. Even though the diversity plays an important role in machine learning process, there is no systematical analysis of the diversification in machine learning system. In this paper, we systematically summarize the methods to make data diversification, model diversification, and inference diversification in the machine learning process, respectively. In addition, the typical applications where the diversity technology improved the machine learning performance have been surveyed, including the remote sensing imaging tasks, machine translation, camera relocalization, image segmentation, object detection, topic modeling, and others. Finally, we discuss some challenges of the diversity technology in machine learning and point out some directions in future work.

cs.CV↗

arXiv2019

A novel statistical metric learning for hyperspectral image classification

In this paper, a novel statistical metric learning is developed for spectral-spatial classification of the hyperspectral image. First, the standard variance of the samples of each class in each batch is used to decrease the intra-class variance within each class. Then, the distances between the means of different classes are used to penalize the inter-class variance of the training samples. Finally, the standard variance between the means of different classes is added as an additional diversity term to repulse different classes from each other. Experiments have conducted over two real-world hyperspectral image datasets and the experimental results have shown the effectiveness of the proposed statistical metric learning.

cs.CV↗

arXiv2019

An End-to-End Joint Unsupervised Learning of Deep Model and Pseudo-Classes for Remote Sensing Scene Representation

This work develops a novel end-to-end deep unsupervised learning method based on convolutional neural network (CNN) with pseudo-classes for remote sensing scene representation. First, we introduce center points as the centers of the pseudo classes and the training samples can be allocated with pseudo labels based on the center points. Therefore, the CNN model, which is used to extract features from the scenes, can be trained supervised with the pseudo labels. Moreover, a pseudo-center loss is developed to decrease the variance between the samples and the corresponding pseudo center point. The pseudo-center loss is important since it can update both the center points with the training samples and the CNN model with the center points in the training process simultaneously. Finally, joint learning of the pseudo-center loss and the pseudo softmax loss which is formulated with the samples and the pseudo labels is developed for unsupervised remote sensing scene representation to obtain discriminative representations from the scenes. Experiments are conducted over two commonly used remote sensing scene datasets to validate the effectiveness of the proposed method and the experimental results show the superiority of the proposed method when compared with other state-of-the-art methods.

cs.CV↗

arXiv2018

A Multi-step Piecewise Linear Approximation Based Solution for Load Pick-up Problem in Electrical Distribution System

The load pick-up (LPP) problem searches the optimal configuration of the electrical distribution system (EDS), aiming to minimize the power loss or provide maximum power to the load ends. The piecewise linearization (PWL) approximation method can be used to tackle the nonlinearity and nonconvexity in network power flow (PF) constraints, and transform the LPP model into a mixed-integer linear programming model (LPP-MILP model).However, for the PWL approximation based PF constraints, big linear approximation errors will affect the accuracy and feasibility of the LPP-MILP model's solving results. And the long modeling and solving time of the direct solution procedure of the LPP-MILP model may affect the applicability of the LPP optimization scheme. This paper proposes a multi-step PWL approximation based solution for the LPP problem in the EDS. In the proposed multi-step solution procedure, the variable upper bounds in the PWL approximation functions are dynamically renewed to reduce the approximation errors effectively. And the multi-step solution procedure can significantly decrease the modeling and solving time of the LPP-MILP model, which ensure the applicability of the LPP optimization scheme. For the two main application schemes for the LPP problem (i.e. network optimization reconfiguration and service restoration), the effectiveness of the proposed method is demonstrated via case studies using a real 13-bus EDS and a real 1066-bus EDS.

math.OC↗

arXiv2014

Binary Stereo Matching

In this paper, we propose a novel binary-based cost computation and aggregation approach for stereo matching problem. The cost volume is constructed through bitwise operations on a series of binary strings. Then this approach is combined with traditional winner-take-all strategy, resulting in a new local stereo matching algorithm called binary stereo matching (BSM). Since core algorithm of BSM is based on binary and integer computations, it has a higher computational efficiency than previous methods. Experimental results on Middlebury benchmark show that BSM has comparable performance with state-of-the-art local stereo methods in terms of both quality and speed. Furthermore, experiments on images with radiometric differences demonstrate that BSM is more robust than previous methods under these changes, which is common under real illumination.

cs.CV↗