SearcharxivSearch

arXiv subjects

Weijie Jin

Publications and source records attributed to Weijie Jin.

9 recordsLinked to original sources

SPA-MAE: A Physics-Guided CSI Foundation Model for Wireless Physical Layer

Deep learning (DL) has been widely used in future 6G physical layer communications, but task-specific DL models are difficult to generalize across different physical layer tasks. Recently emerging wireless foundation models demonstrate strong generalization capability. However, existing methods mainly adapt pretrained language/vision models or rely on CSI reconstruction objectives for pretraining, with limited use of channel knowledge, and thus have limited performance. To address this limitation, we propose SPA-MAE, a physics-guided wireless foundation model by exploiting the adapted MAE backbone and channel knowledge. A physical prior module is developed to provide two complementary guidance signals in the pretraining stage. Specifically, the parameter-aware guidance branch extracts features from explicit multipath parameters and encourages the encoder output to align them, while the structure-aware guidance branch encourages the encoder to capture the sparse transformed-domain CSI structure obtained after a 2D FFT. After end-to-end learning, the MAE encoder will be retained for downstream tasks. Experiments on four wireless tasks show that SPA-MAE outperforms state-of-the-art CSI foundation models with smaller number of parameters, especially under low-SNR and limited-data conditions.

cs.IT

Deep Learning-based Low-Overhead Beam Alignment for mmWave Massive MIMO Systems

Millimeter-wave massive multiple-input multiple-output systems employ highly directional beamforming to overcome severe path loss, and their performance critically depends on accurate beam alignment. Conventional codebook-based methods offer low training overhead but suffer from limited angular resolution and sensitivity to hardware impairments. To address these challenges, we propose a deep learning-enhanced super-resolution beam alignment framework with three key components. First, we design the Quaternary Search-based Super-Resolution (QSSR) algorithm, which leverages the monotonic power ratio property between two discrete Fourier transform (DFT) codebook beams to achieve super-resolution angle estimation without increasing measurement complexity relative to binary search. Second, we develop QSSR-Net, a gated recurrent unit-based neural network that exploits sequential multi-layer beam measurements to capture angular dependencies, thereby improving estimation accuracy, robustness to noise, and generalization across diverse propagation environments. Third, to mitigate the adverse effects of hardware impairments such as antenna position and phase errors, we propose a parametric self-calibration method that requires no additional hardware overhead and adapts compensation parameters in real time. Simulation results show that the proposed framework consistently outperforms binary search and even exhaustive search at high signal-to-noise ratios, achieving substantial performance gains while maintaining low overhead.

eess.SP

A Practical Guide to Unbinned Unfolding

Unfolding, in the context of high-energy particle physics, refers to the process of removing detector distortions in experimental data. The resulting unfolded measurements are straightforward to use for direct comparisons between experiments and a wide variety of theoretical predictions. For decades, popular unfolding strategies were designed to operate on data formatted as one or more binned histograms. In recent years, new strategies have emerged that use machine learning to unfold datasets in an unbinned manner, allowing for higher-dimensional analyses and more flexibility for current and future users of the unfolded data. This guide comprises recommendations and practical considerations from researchers across a number of major particle physics experiments who have recently put these techniques into practice on real data.

hep-ph

Low-Complexity Joint Beamforming for RIS-Assisted MU-MISO Systems Based on Model-Driven Deep Learning

Reconfigurable intelligent surfaces (RIS) can improve signal propagation environments by adjusting the phase of the incident signal. However, optimizing the phase shifts jointly with the beamforming vector at the access point is challenging due to the non-convex objective function and constraints. In this study, we propose an algorithm based on weighted minimum mean square error optimization and power iteration to maximize the weighted sum rate (WSR) of a RIS-assisted downlink multi-user multiple-input single-output system. To further improve performance, a model-driven deep learning (DL) approach is designed, where trainable variables and graph neural networks are introduced to accelerate the convergence of the proposed algorithm. We also extend the proposed method to include beamforming with imperfect channel state information and derive a two-timescale stochastic optimization algorithm. Simulation results show that the proposed algorithm outperforms state-of-the-art algorithms in terms of complexity and WSR. Specifically, the model-driven DL approach has a runtime that is approximately 3% of the state-of-the-art algorithm to achieve the same performance. Additionally, the proposed algorithm with 2-bit phase shifters outperforms the compared algorithm with continuous phase shift.

eess.SP

Characterization of passive CMOS sensors with RD53A pixel modules

Both the current upgrades to accelerator-based HEP detectors (e.g. ATLAS, CMS) and also future projects (e.g. CEPC, FCC) feature large-area silicon-based tracking detectors. We are investigating the feasibility of using CMOS foundries to fabricate silicon radiation detectors, both for pixels and for large-area strip sensors. A successful proof of concept would open the market potential of CMOS foundries to the HEP community, which would be most beneficial in terms of availability, throughput and cost. In addition, the availability of multi-layer routing of signals will provide the freedom to optimize the sensor geometry and the performance, with biasing structures implemented in poly-silicon layers and MIM-capacitors allowing for AC coupling. A prototyping production of strip test structures and RD53A compatible pixel sensors was recently completed at LFoundry in a 150nm CMOS process. This presentation will focus on the characterization of pixel modules, studying the performance in terms of charge collection, position resolution and hit efficiency with measurements performed in the laboratory and with beam tests. We will report on the investigation of RD53A modules with 25x100 mu^2 cell geometry.

physics.ins-det

Adaptive Channel Estimation Based on Model-Driven Deep Learning for Wideband mmWave Systems

Channel estimation in wideband millimeter-wave (mmWave) systems is very challenging due to the beam squint effect. To solve the problem, we propose a learnable iterative shrinkage thresholding algorithm-based channel estimator (LISTA-CE) based on deep learning. The proposed channel estimator can learn to transform the beam-frequency mmWave channel into the domain with sparse features through training data. The transform domain enables us to adopt a simple denoiser with few trainable parameters. We further enhance the adaptivity of the estimator by introducing hypernetwork to automatically generate learnable parameters for LISTA-CE online. Simulation results show that the proposed approach can significantly outperform the state-of-the-art deep learning-based algorithms with lower complexity and fewer parameters and adapt to new scenarios rapidly.

eess.SP

Beamspace Channel Estimation for Wideband Millimeter-Wave MIMO: A Model-Driven Unsupervised Learning Approach

Millimeter-wave (mmWave) communications have been one of the promising technologies for future wireless networks that integrate a wide range of data-demanding applications. To compensate for the large channel attenuation in mmWave band and avoid high hardware cost, a lens-based beamspace massive multiple-input multiple-output (MIMO) system is considered. However, the beam squint effect in wideband mmWave systems makes channel estimation very challenging, especially when the receiver is equipped with a limited number of radio-frequency (RF) chains. Furthermore, the real channel data cannot be obtained before the mmWave system is used in a new environment, which makes it impossible to train a deep learning (DL)-based channel estimator using real data set beforehand. To solve the problem, we propose a model-driven unsupervised learning network, named learned denoising-based generalized expectation consistent (LDGEC) signal recovery network. By utilizing the Stein's unbiased risk estimator loss, the LDGEC network can be trained only with limited measurements corresponding to the pilot symbols, instead of the real channel data. Even if designed for unsupervised learning, the LDGEC network can be supervisingly trained with the real channel via the denoiser-by-denoiser way. The numerical results demonstrate that the LDGEC-based channel estimator significantly outperforms state-of-the-art compressive sensing-based algorithms when the receiver is equipped with a small number of RF chains and low-resolution ADCs.

eess.SP

Axion Monodromy Inflation, Trapping Mechanisms and the Swampland

We study the effects of particle production on the evolution of the inflaton field in an axion monodromy model with the goal of discovering in which situations the resulting dynamics will be consistent with the {\it swampland constraints}. In the presence of a modulated potential the evolving background field (solution of the inflaton homogeneous in space) induces the production of long wavelength inflaton fluctuation modes. However, this either has a negligible effect on the inflaton dynamics (if the field spacing between local minima of the modulated potential is large), or else it traps the inflaton in a local minimum and leads to a graceful exit problem. On the other hand, the production of moduli fields at enhanced symmetry points can lead to a realization of {\it trapped inflation} consistent with the swampland constraints, as long as the coupling between the inflaton and the moduli fields is sufficiently large.

hep-th

Single-photon computational 3D imaging at 45 km

Long-range active imaging has a variety of applications in remote sensing and target recognition. Single-photon LiDAR (light detection and ranging) offers single-photon sensitivity and picosecond timing resolution, which is desirable for high-precision three-dimensional (3D) imaging over long distances. Despite important progress, further extending the imaging range presents enormous challenges because only weak echo photons return and are mixed with strong noise. Herein, we tackled these challenges by constructing a high-efficiency, low-noise confocal single-photon LiDAR system, and developing a long-range-tailored computational algorithm that provides high photon efficiency and super-resolution in the transverse domain. Using this technique, we experimentally demonstrated active single-photon 3D-imaging at a distance of up to 45 km in an urban environment, with a low return-signal level of $\sim$1 photon per pixel. Our system is feasible for imaging at a few hundreds of kilometers by refining the setup, and thus represents a significant milestone towards rapid, low-power, and high-resolution LiDAR over extra-long ranges.

eess.IV