arXiv subjects

Weiliang Xu

Publications and source records attributed to Weiliang Xu.

7 recordsLinked to original sources

arXiv2026

Vision-Based Tactile Sensing for the Perception of the Object's Compliance and Hardness

Object compliance perception enables the identification of soft materials, supporting tasks such as fruit detection and assisted medical palpation. Compliance perception requires sensing an object's deformation and contact forces. Existing vision-based tactile sensing for compliance perception usually depends only on force or deformation. However, deformation-based approaches cannot reliably quantify object compliance, while force-based methods are overly sensitive to geometric variations. To address these limitations, this paper presents a framework that fuses temporal force sequences and deformation field information. Specifically, time-varying contact forces are inferred from tactile image sequences via a neural network, while deformation characteristics are encoded using depth maps. Crucially, the temporal force sequence is used as a dynamic force-response feature for compliance recognition. In standard experiments, the force prediction error reaches 0.06 N within a measurement range of 12 N. The proposed method achieves a 98.0% Shore-hardness classification accuracy for samples ranging from 10 HA to 80 HA. In practical scenarios, including abnormal fruit detection and soft matter, the overall accuracy exceeds 98.5%. This method improves the compliance perception ability of artificial tactile systems and facilitates their deployment in embodied perception applications.

cs.RO↗

arXiv2026

RoSE: A Robotic Soft Esophagus for Endoprosthetic Stent Testing

Soft robotic systems are well suited for developing devices for biomedical applications. A bio-mimicking robotic soft esophagus (RoSE) is developed as an in vitro testing device of endoprosthetic stents for dysphagia management. Endoprosthetic stent placement is an immediate and cost-effective therapy for dysphagia caused by malignant esophageal strictures from esophageal cancer. However, later stage complications, like stent migration, could weaken swallow efficacy in the esophagus. The stent radial force (RF) on the esophageal wall is pivotal in avoiding stent migration. Due to limited randomized controlled trials in patients, stent design and stenting guidelines remain incomplete. To address this knowledge deficit, we investigate RoSE by implanting two stents (A and B) of different radial stiffness characteristics, to measure stent RF and its effect on migration. Endoscopic manometry under peristalsis is also performed to study the impact of stenting and stent dysfunction on intra-bolus pressure signatures (IBPSs) and swallowing efficacy. Each implanted stent undergoes experiments with varied peristalsis velocity, wavelength, and bolus concentrations. The results show that stiffer stent B has a higher RF, whereas stent A maintains a lower RF profile due to lesser stiffness. High RF is necessary to minimize migration under prolonged peristaltic contractions in RoSE. For manometry, stent A slightly increases IBPS, but stiffer stent B significantly decreases IBPS, especially for higher-concentration boluses. If a stiffer stent buckles, it can reduce swallow efficacy and cause recurrent dysphagia. RoSE is therefore an innovative soft robotic platform for testing endoprosthetic stents and addressing clinical challenges in stent evaluation.

cs.RO↗

arXiv2026

Nonlinear Model Predictive Control of a Robotic Soft Esophagus

Strictures caused by esophageal cancer can narrow down the esophageal lumen, leading to dysphagia. Palliation of dysphagia has driven the development of a Robotic Soft Esophagus (RoSE), which provides a novel in vitro platform for esophageal stent testing and food viscosity studies. In RoSE, peristaltic wave generation and control were done in an open-loop manner since the conduit lacked visibility and embedded sensing capability. Hence, in this work, RoSE version 2.0 (RoSEv2.0) is designed with embedded Time Of Flight (TOF) and pressure sensors to measure conduit displacement and air pressure, respectively, for modeling and control. Model Predictive Control (MPC) of RoSEv2.0 is implemented to govern the peristalsis and air pressure profile autonomously. The implemented MPC used Sparse Identification Nonlinear Dynamics with Control (SINDYC) models to estimate the future states of ROSEv2.0. The dynamic models are discovered from the TOF and pressure sensor data. Peristalsis waves of speed 20 mm/s, wavelength 75 mm, and amplitudes 5, 7.5, and 10 mm were successfully generated by the MPC. Additionally, RoSEv2.0 with the MPC was employed to perform stent migration testing with various food bolus consistencies. The major contribution claimed in this paper is the application of SINDYC-based MPC to solve the closed-loop control problem of RoSE for achieving desired peristaltic waves.

cs.RO↗

arXiv2024

Cyclic Fusion of Measuring Information in Curved Elastomer Contact via Vision-Based Tactile Sensing

Vision-based tactile sensors encode object data via optical signals, capturing microscale deformations using elastomer through densely arranged optical imaging sensors to detect subtle data variations. To enable continuous contact recognition, elastomers are crafted with curved surfaces to adjust to changes in the contact area. However, this design leads to uneven deformations, distorting tactile images and inaccurately reflecting the true elastomer deformations. In this work, we propose a cyclic fusion strategy for vision-based tactile sensing for precise contact data extraction and shape feature integration at the pixel level. Utilizing frequency domain fusion, the system merges topography as indicated by elastomer deformation, enhancing information content by 8%, and regional information bias is reduced by 20% when preserving structural consistency. Further, this system could effectively extract and summarize micro-scale contact features, decreasing erroneous predictions by 20% in defect detection via neural networks and reducing surface projection bias by 50% in surface depth reconstruction. Using this strategy, the measurement minimizes data interference, accurately depicting object morphology on tactile images and enhancing tactile sensation restoration.

cs.RO↗

arXiv2024

Vision-based Tactile Image Generation via Contact Condition-guided Diffusion Model

Vision-based tactile sensors, through high-resolution optical measurements, can effectively perceive the geometric shape of objects and the force information during the contact process, thus helping robots acquire higher-dimensional tactile data. Vision-based tactile sensor simulation supports the acquisition and understanding of tactile information without physical sensors by accurately capturing and analyzing contact behavior and physical properties. However, the complexity of contact dynamics and lighting modeling limits the accurate reproduction of real sensor responses in simulations, making it difficult to meet the needs of different sensor setups and affecting the reliability and effectiveness of strategy transfer to practical applications. In this letter, we propose a contact-condition guided diffusion model that maps RGB images of objects and contact force data to high-fidelity, detail-rich vision-based tactile sensor images. Evaluations show that the three-channel tactile images generated by this method achieve a 60.58% reduction in mean squared error and a 38.1% reduction in marker displacement error compared to existing approaches based on lighting model and mechanical model, validating the effectiveness of our approach. The method is successfully applied to various types of tactile vision sensors and can effectively generate corresponding tactile images under complex loads. Additionally, it demonstrates outstanding reconstruction of fine texture features of objects in a Montessori tactile board texture generation task.

cs.RO↗

arXiv2024

A Vision-Based Tactile Sensing System for Multimodal Contact Information Perception via Neural Network

In general, robotic dexterous hands are equipped with various sensors for acquiring multimodal contact information such as position, force, and pose of the grasped object. This multi-sensor-based design adds complexity to the robotic system. In contrast, vision-based tactile sensors employ specialized optical designs to enable the extraction of tactile information across different modalities within a single system. Nonetheless, the decoupling design for different modalities in common systems is often independent. Therefore, as the dimensionality of tactile modalities increases, it poses more complex challenges in data processing and decoupling, thereby limiting its application to some extent. Here, we developed a multimodal sensing system based on a vision-based tactile sensor, which utilizes visual representations of tactile information to perceive the multimodal contact information of the grasped object. The visual representations contain extensive content that can be decoupled by a deep neural network to obtain multimodal contact information such as classification, position, posture, and force of the grasped object. The results show that the tactile sensing system can perceive multimodal tactile information using only one single sensor and without different data decoupling designs for different modal tactile information, which reduces the complexity of the tactile system and demonstrates the potential for multimodal tactile integration in various fields such as biomedicine, biology, and robotics.

cs.RO↗

arXiv2018

Synchronous Adversarial Feature Learning for LiDAR based Loop Closure Detection

Loop Closure Detection (LCD) is the essential module in the simultaneous localization and mapping (SLAM) task. In the current appearance-based SLAM methods, the visual inputs are usually affected by illumination, appearance and viewpoints changes. Comparing to the visual inputs, with the active property, light detection and ranging (LiDAR) based point-cloud inputs are invariant to the illumination and appearance changes. In this paper, we extract 3D voxel maps and 2D top view maps from LiDAR inputs, and the former could capture the local geometry into a simplified 3D voxel format, the later could capture the local road structure into a 2D image format. However, the most challenge problem is to obtain efficient features from 3D and 2D maps to against the viewpoints difference. In this paper, we proposed a synchronous adversarial feature learning method for the LCD task, which could learn the higher level abstract features from different domains without any label data. To the best of our knowledge, this work is the first to extract multi-domain adversarial features for the LCD task in real time. To investigate the performance, we test the proposed method on the KITTI odometry dataset. The extensive experiments results show that, the proposed method could largely improve LCD accuracy even under huge viewpoints differences.

cs.RO↗