arXiv subjects

Weipeng Zhuo

Publications and source records attributed to Weipeng Zhuo.

12 recordsLinked to original sources

arXiv2025

SDT-GNN: Streaming-based Distributed Training Framework for Graph Neural Networks

Recently, distributed GNN training frameworks, such as DistDGL and PyG, have been developed to enable training GNN models on large graphs by leveraging multiple GPUs in a distributed manner. Despite these advances, their memory requirements are still excessively high, thereby hindering GNN training on large graphs using commodity workstations. In this paper, we propose SDT-GNN, a streaming-based distributed GNN training framework. Unlike the existing frameworks that load the entire graph in memory, it takes a stream of edges as input for graph partitioning to reduce the memory requirement for partitioning. It also enables distributed GNN training even when the aggregated memory size of GPUs is smaller than the size of the graph and feature data. Furthermore, to improve the quality of partitioning, we propose SPRING, a novel streaming partitioning algorithm for distributed GNN training. We demonstrate the effectiveness and efficiency of SDT-GNN on seven large public datasets. SDT-GNN has up to 95% less memory footprint than DistDGL and PyG without sacrificing the prediction accuracy. SPRING also outperforms state-of-the-art streaming partitioning algorithms significantly.

cs.LG↗

arXiv2025

TAMI: Taming Heterogeneity in Temporal Interactions for Temporal Graph Link Prediction

Temporal graph link prediction aims to predict future interactions between nodes in a graph based on their historical interactions, which are encoded in node embeddings. We observe that heterogeneity naturally appears in temporal interactions, e.g., a few node pairs can make most interaction events, and interaction events happen at varying intervals. This leads to the problems of ineffective temporal information encoding and forgetting of past interactions for a pair of nodes that interact intermittently for their link prediction. Existing methods, however, do not consider such heterogeneity in their learning process, and thus their learned temporal node embeddings are less effective, especially when predicting the links for infrequently interacting node pairs. To cope with the heterogeneity, we propose a novel framework called TAMI, which contains two effective components, namely log time encoding function (LTE) and link history aggregation (LHA). LTE better encodes the temporal information through transforming interaction intervals into more balanced ones, and LHA prevents the historical interactions for each target node pair from being forgotten. State-of-the-art temporal graph neural networks can be seamlessly and readily integrated into TAMI to improve their effectiveness. Experiment results on 13 classic datasets and three newest temporal graph benchmark (TGB) datasets show that TAMI consistently improves the link prediction performance of the underlying models in both transductive and inductive settings. Our code is available at https://github.com/Alleinx/TAMI_temporal_graph.

cs.LG↗

arXiv2025

MTM: A Multi-Scale Token Mixing Transformer for Irregular Multivariate Time Series Classification

Irregular multivariate time series (IMTS) is characterized by the lack of synchronized observations across its different channels. In this paper, we point out that this channel-wise asynchrony can lead to poor channel-wise modeling of existing deep learning methods. To overcome this limitation, we propose MTM, a multi-scale token mixing transformer for the classification of IMTS. We find that the channel-wise asynchrony can be alleviated by down-sampling the time series to coarser timescales, and propose to incorporate a masked concat pooling in MTM that gradually down-samples IMTS to enhance the channel-wise attention modules. Meanwhile, we propose a novel channel-wise token mixing mechanism which proactively chooses important tokens from one channel and mixes them with other channels, to further boost the channel-wise learning of our model. Through extensive experiments on real-world datasets and comparison with state-of-the-art methods, we demonstrate that MTM consistently achieves the best performance on all the benchmarks, with improvements of up to 3.8% in AUPRC for classification.

cs.LG↗

arXiv2025

Graph-based Fingerprint Update Using Unlabelled WiFi Signals

WiFi received signal strength (RSS) environment evolves over time due to movement of access points (APs), AP power adjustment, installation and removal of APs, etc. We study how to effectively update an existing database of fingerprints, defined as the RSS values of APs at designated locations, using a batch of newly collected unlabelled (possibly crowdsourced) WiFi signals. Prior art either estimates the locations of the new signals without updating the existing fingerprints or filters out the new APs without sufficiently embracing their features. To address that, we propose GUFU, a novel effective graph-based approach to update WiFi fingerprints using unlabelled signals with possibly new APs. Based on the observation that similar signal vectors likely imply physical proximity, GUFU employs a graph neural network (GNN) and a link prediction algorithm to retrain an incremental network given the new signals and APs. After the retraining, it then updates the signal vectors at the designated locations. Through extensive experiments in four large representative sites, GUFU is shown to achieve remarkably higher fingerprint adaptivity as compared with other state-of-the-art approaches, with error reduction of 21.4% and 29.8% in RSS values and location prediction, respectively.

cs.NI↗

arXiv2024

M$^3$-Impute: Mask-guided Representation Learning for Missing Value Imputation

Missing values are a common problem that poses significant challenges to data analysis and machine learning. This problem necessitates the development of an effective imputation method to fill in the missing values accurately, thereby enhancing the overall quality and utility of the datasets. Existing imputation methods, however, fall short of explicitly considering the `missingness' information in the data during the embedding initialization stage and modeling the entangled feature and sample correlations during the learning process, thus leading to inferior performance. We propose M$^3$-Impute, which aims to explicitly leverage the missingness information and such correlations with novel masking schemes. M$^3$-Impute first models the data as a bipartite graph and uses a graph neural network to learn node embeddings, where the refined embedding initialization process directly incorporates the missingness information. They are then optimized through M$^3$-Impute's novel feature correlation unit (FRU) and sample correlation unit (SRU) that effectively captures feature and sample correlations for imputation. Experiment results on 25 benchmark datasets under three different missingness settings show the effectiveness of M$^3$-Impute by achieving 20 best and 4 second-best MAE scores on average.

cs.LG↗

arXiv2024

A Multi-Scale Decomposition MLP-Mixer for Time Series Analysis

Time series data, including univariate and multivariate ones, are characterized by unique composition and complex multi-scale temporal variations. They often require special consideration of decomposition and multi-scale modeling to analyze. Existing deep learning methods on this best fit to univariate time series only, and have not sufficiently considered sub-series modeling and decomposition completeness. To address these challenges, we propose MSD-Mixer, a Multi-Scale Decomposition MLP-Mixer, which learns to explicitly decompose and represent the input time series in its different layers. To handle the multi-scale temporal patterns and multivariate dependencies, we propose a novel temporal patching approach to model the time series as multi-scale patches, and employ MLPs to capture intra- and inter-patch variations and channel-wise correlations. In addition, we propose a novel loss function to constrain both the mean and the autocorrelation of the decomposition residual for better decomposition completeness. Through extensive experiments on various real-world datasets for five common time series analysis tasks, we demonstrate that MSD-Mixer consistently and significantly outperforms other state-of-the-art algorithms with better efficiency.

cs.LG↗

arXiv2023

FIS-ONE: Floor Identification System with One Label for Crowdsourced RF Signals

Floor labels of crowdsourced RF signals are crucial for many smart-city applications, such as multi-floor indoor localization, geofencing, and robot surveillance. To build a prediction model to identify the floor number of a new RF signal upon its measurement, conventional approaches using the crowdsourced RF signals assume that at least few labeled signal samples are available on each floor. In this work, we push the envelope further and demonstrate that it is technically feasible to enable such floor identification with only one floor-labeled signal sample on the bottom floor while having the rest of signal samples unlabeled. We propose FIS-ONE, a novel floor identification system with only one labeled sample. FIS-ONE consists of two steps, namely signal clustering and cluster indexing. We first build a bipartite graph to model the RF signal samples and obtain a latent representation of each node (each signal sample) using our attention-based graph neural network model so that the RF signal samples can be clustered more accurately. Then, we tackle the problem of indexing the clusters with proper floor labels, by leveraging the observation that signals from an access point can be detected on different floors, i.e., signal spillover. Specifically, we formulate a cluster indexing problem as a combinatorial optimization problem and show that it is equivalent to solving a traveling salesman problem, whose (near-)optimal solution can be found efficiently. We have implemented FIS-ONE and validated its effectiveness on the Microsoft dataset and in three large shopping malls. Our results show that FIS-ONE outperforms other baseline algorithms significantly, with up to 23% improvement in adjusted rand index and 25% improvement in normalized mutual information using only one floor-labeled signal sample.

cs.NI↗

arXiv2023

Run, Don't Walk: Chasing Higher FLOPS for Faster Neural Networks

To design fast neural networks, many works have been focusing on reducing the number of floating-point operations (FLOPs). We observe that such reduction in FLOPs, however, does not necessarily lead to a similar level of reduction in latency. This mainly stems from inefficiently low floating-point operations per second (FLOPS). To achieve faster networks, we revisit popular operators and demonstrate that such low FLOPS is mainly due to frequent memory access of the operators, especially the depthwise convolution. We hence propose a novel partial convolution (PConv) that extracts spatial features more efficiently, by cutting down redundant computation and memory access simultaneously. Building upon our PConv, we further propose FasterNet, a new family of neural networks, which attains substantially higher running speed than others on a wide range of devices, without compromising on accuracy for various vision tasks. For example, on ImageNet-1k, our tiny FasterNet-T0 is $2.8\times$, $3.3\times$, and $2.4\times$ faster than MobileViT-XXS on GPU, CPU, and ARM processors, respectively, while being $2.9\%$ more accurate. Our large FasterNet-L achieves impressive $83.5\%$ top-1 accuracy, on par with the emerging Swin-B, while having $36\%$ higher inference throughput on GPU, as well as saving $37\%$ compute time on CPU. Code is available at \url{https://github.com/JierunChen/FasterNet}.

cs.CV↗

arXiv2023

Semi-supervised Learning with Network Embedding on Ambient RF Signals for Geofencing Services

In applications such as elderly care, dementia anti-wandering and pandemic control, it is important to ensure that people are within a predefined area for their safety and well-being. We propose GEM, a practical, semi-supervised Geofencing system with network EMbedding, which is based only on ambient radio frequency (RF) signals. GEM models measured RF signal records as a weighted bipartite graph. With access points on one side and signal records on the other, it is able to precisely capture the relationships between signal records. GEM then learns node embeddings from the graph via a novel bipartite network embedding algorithm called BiSAGE, based on a Bipartite graph neural network with a novel bi-level SAmple and aggreGatE mechanism and non-uniform neighborhood sampling. Using the learned embeddings, GEM finally builds a one-class classification model via an enhanced histogram-based algorithm for in-out detection, i.e., to detect whether the user is inside the area or not. This model also keeps on improving with newly collected signal records. We demonstrate through extensive experiments in diverse environments that GEM shows state-of-the-art performance with up to 34% improvement in F-score. BiSAGE in GEM leads to a 54% improvement in F-score, as compared to the one without BiSAGE.

cs.NI↗

arXiv2022

GRAFICS: Graph Embedding-based Floor Identification Using Crowdsourced RF Signals

We study the problem of floor identification for radiofrequency (RF) signal samples obtained in a crowdsourced manner, where the signal samples are highly heterogeneous and most samples lack their floor labels. We propose GRAFICS, a graph embedding-based floor identification system. GRAFICS first builds a highly versatile bipartite graph model, having APs on one side and signal samples on the other. GRAFICS then learns the low-dimensional embeddings of signal samples via a novel graph embedding algorithm named E-LINE. GRAFICS finally clusters the node embeddings along with the embeddings of a few labeled samples through a proximity-based hierarchical clustering, which eases the floor identification of every new sample. We validate the effectiveness of GRAFICS based on two large-scale datasets that contain RF signal records from 204 buildings in Hangzhou, China, and five buildings in Hong Kong. Our experiment results show that GRAFICS achieves highly accurate prediction performance with only a few labeled samples (96% in both micro- and macro-F scores) and significantly outperforms several state-of-the-art algorithms (by about 45% improvement in micro-F score and 53% in macro-F score).

cs.NI↗

arXiv2022

TVConv: Efficient Translation Variant Convolution for Layout-aware Visual Processing

As convolution has empowered many smart applications, dynamic convolution further equips it with the ability to adapt to diverse inputs. However, the static and dynamic convolutions are either layout-agnostic or computation-heavy, making it inappropriate for layout-specific applications, e.g., face recognition and medical image segmentation. We observe that these applications naturally exhibit the characteristics of large intra-image (spatial) variance and small cross-image variance. This observation motivates our efficient translation variant convolution (TVConv) for layout-aware visual processing. Technically, TVConv is composed of affinity maps and a weight-generating block. While affinity maps depict pixel-paired relationships gracefully, the weight-generating block can be explicitly overparameterized for better training while maintaining efficient inference. Although conceptually simple, TVConv significantly improves the efficiency of the convolution and can be readily plugged into various network architectures. Extensive experiments on face recognition show that TVConv reduces the computational cost by up to 3.1x and improves the corresponding throughput by 2.3x while maintaining a high accuracy compared to the depthwise convolution. Moreover, for the same computation cost, we boost the mean accuracy by up to 4.21%. We also conduct experiments on the optic disc/cup segmentation task and obtain better generalization performance, which helps mitigate the critical data scarcity issue. Code is available at https://github.com/JierunChen/TVConv.

cs.CV↗

arXiv2022

Tackling Multipath and Biased Training Data for IMU-Assisted BLE Proximity Detection

Proximity detection is to determine whether an IoT receiver is within a certain distance from a signal transmitter. Due to its low cost and high popularity, Bluetooth low energy (BLE) has been used to detect proximity based on the received signal strength indicator (RSSI). To address the fact that RSSI can be markedly influenced by device carriage states, previous works have incorporated RSSI with inertial measurement unit (IMU) using deep learning. However, they have not sufficiently accounted for the impact of multipath. Furthermore, due to the special setup, the IMU data collected in the training process may be biased, which hampers the system's robustness and generalizability. This issue has not been studied before. We propose PRID, an IMU-assisted BLE proximity detection approach robust against RSSI fluctuation and IMU data bias. PRID histogramizes RSSI to extract multipath features and uses carriage state regularization to mitigate overfitting due to IMU data bias. We further propose PRID-lite based on a binarized neural network to substantially cut memory requirements for resource-constrained devices. We have conducted extensive experiments under different multipath environments, data bias levels, and a crowdsourced dataset. Our results show that PRID significantly reduces false detection cases compared with the existing arts (by over 50%). PRID-lite further reduces over 90% PRID model size and extends 60% battery life, with a minor compromise in accuracy (7%).

cs.HC↗