Searcharxiv⌕ Search

arXiv subjects

Weiqiu Chen

Publications and source records attributed to Weiqiu Chen.

31 records · Page 2Linked to original sources
arXiv2021

Low-frequency tunable topological interface states in soft phononic crystal cylinders

Topological phononic crystals have attracted intensive attention due to their peculiar topologically protected interface or edge states. Their operating frequency, however, is generally fixed once designed and fabricated. Here, we propose to overcome this limitation by utilizing soft topological phononic crystals. In particular, we design a simple one-dimensional periodic system of soft cylindrical waveguides to realize mechanically tunable topological interface states for longitudinal waves. To this end, we employ the nonlinear elasticity theory and its linearized incremental version to fully account for both geometric and material nonlinearities of the system. We derive the dispersion relation for small-amplitude longitudinal motions superimposed on the finitely deformed state. In addition, our analytical results provide information about the corresponding Bloch wave modes, displacement field distributions, and signal transmission coefficients for finite cylindrical waveguides with identical or various unit-cell topologies. Our numerical results illustrate the low-frequency topological interface state occurring at the interface between two topologically distinct soft phononic cylinders. Moreover, we show that the corresponding frequency in the overlapped band gap can be continuously adjusted by an external force. This analytical result is also validated by the finite element simulations. Finally, we provide the topological phase diagrams to demonstrate the tunable position and existence condition of the topological interface states when tuning the external loading. The low-frequency tunable topological interface states with remarkable field enhancement may find a wide range of potential applications such as tunable energy harvesters, low-pass filters and high-sensitivity detectors for biomedical applications.

cond-mat.soft↗
arXiv2020

Influence of initial residual stress on growth and pattern creation for a layered aorta

Residual stress is ubiquitous and indispensable in most biological and artificial materials, where it sustains and optimizes many biological and functional mechanisms. The theory of volume growth, starting from a stress-free initial state, is widely used to explain the creation and evolution of growth-induced residual stress and the resulting changes in shape, and to model how growing bio-tissues such as arteries and solid tumors develop a strategy of pattern creation according to geometrical and material parameters. This modelling provides promising avenues for designing and directing some appropriate morphology of a given tissue or organ and achieve some targeted biomedical function. In this paper, we rely on a modified, augmented theory to reveal how we can obtain growth-induced residual stress and pattern evolution of a layered artery by starting from an existing, non-zero initial residual stress state. We use experimentally determined residual stress distributions of aged bi-layered human aortas and quantify their influence by a magnitude factor. Our results show that initial residual stress has a more significant impact on residual stress accumulation and the subsequent evolution of patterns than geometry and material parameters. Additionally, we provide an essential explanation for growth-induced patterns driven by differential growth coupled to an initial residual stress. Finally, we show that initial residual stress is a readily available way to control growth-induced pattern creation for tissues and thus may provide a promising inspiration for biomedical engineering.

cond-mat.soft↗
arXiv2020

Actively controllable topological phase transition in phononic beam systems

Topological insulators, which allow edge or interface waves but forbid bulk waves, have revolutionized our scientific cognition of acoustic/elastic systems. Due to their nontrivial topological characteristics, edge (interface)waves are topologically protected against defects and disorders. This superior and unique characteristic could lead to a wealth of new opportunities in applications of quantum and acoustic/elastic information processing. However, current acoustic/elastic topological insulators are still at an infancy stage where the theory and prediction only work in laboratories and there are still many problems left open before promoting their practical applications. One of the apparent disadvantages is their narrow working frequency range, which is the main concern in this paper. We design a one-dimensional phononic beam system made of a homogeneous epoxy central beam sandwiched by two homogeneous piezoelectric beams, and covered with extremely thin electrodes, periodically and separately placed. These electrodes are connected to external electric circuits with negative capacitors. We show that a topological phase transition can be induced and tuned by changing the values of the negative capacitors. It follows that the working frequency of the topologically protected interface mode can be widely changed, such that the working frequency range of the topological insulator can be considerably `broadened'. This intelligent topological device may also find wide applications in intelligent technologies that need controllable information processing of high precision.

physics.app-ph↗
arXiv2020

Electrostatically tunable axisymmetric vibrations of soft electro-active tubes

Due to their unique electromechanical coupling properties, soft electro-active (SEA) resonators are actively tunable, extremely suitable, and practically important for designing the next-generation acoustic and vibration treatment devices. In this paper, we investigate the electrostatically tunable axisymmetric vibrations of SEA tubes with different geometric sizes. We consider both axisymmetric torsional and longitudinal vibrations for an incompressible SEA cylindrical tube under inhomogeneous biasing fields induced by radial electric voltage and axial pre-stretch. We then employ the state-space method, which combines the state-space formalism in cylindrical coordinates with the approximate laminate technique, to derive the frequency equations for two separate classes of axisymmetric vibration of the tube subjected to appropriate boundary conditions. We perform numerical calculations to validate the convergence and accuracy of the state-space method and to illuminate that the axisymmetric vibration characteristics of SEA tubes may be tuned significantly by adjusting the electromechanical biasing fields as well as altering the tube geometry. The reported results provide a solid guidance for the proper design of tunable resonant devices composed of SEA tubes

cond-mat.soft↗
arXiv2020

The effect of an exterior electric field on the instability of dielectric plates

We investigate the theoretical nonlinear response, Hessian stability, and possible wrinkling behaviour of a voltage-activated dielectric plate immersed in a tank filled with silicone oil. Fixed rigid electrodes are placed on the top and bottom of the tank, and an electric field is generated by a potential difference between the electrodes. We solve the associated incremental boundary value problem of superimposed, inhomogeneous small-amplitude wrinkles, signalling the onset of instability. We decouple the resulting bifurcation equation into symmetric and antisymmetric modes. For a neo-Hookean dielectric plate, we show that a potential difference between the electrodes can induce a thinning of the plate and thus an increase of its planar area, similar to the scenarios encountered when there is no silicone oil. However, we also find that, depending on the material and geometric parameters, an increasing applied voltage can also lead to a thickening of the plate, and thus a shrinking of its area. In that scenario, Hessian instability and wrinkling bifurcation may then occur spontaneously once some critical voltages are reached.

cond-mat.soft↗
arXiv2020

Nonlinear response and axisymmetric wave propagation in functionally graded soft electro-active tubes

Soft electro-active (SEA) materials can be designed and manufactured with gradients in their material properties, to modify and potentially improve their mechanical response in service. Here, we investigate the nonlinear response of, and axisymmetric wave propagation in a soft circular tube made of a functionally graded SEA material and subject to several biasing fields, including axial pre-stretch, internal/external pressure, and through-thickness electric voltage. We take the energy density function of the material to be of the Mooney-Rivlin ideal dielectric type, with material parameters changing linearly along the radial direction. We employ the general theory of nonlinear electro-elasticity to obtain explicitly the nonlinear response of the tube to the applied fields. To study wave propagation under inhomogeneous biasing fields, we formulate the incremental equations of motion within the state-space formalism. We adopt the approximate laminate technique to derive the analytical dispersion relations for the small-amplitude torsional and longitudinal waves superimposed on a finitely deformed state. Comprehensive numerical results then illustrate that the material gradients and biasing fields have significant influences on the static nonlinear response and on the axisymmetric wave propagation in the tube. This study lays the groundwork for designing SEA actuators with improved performance, for tailoring tunable SEA waveguides, and for characterizing non-destructively functionally graded tubular structures.

cond-mat.soft↗
arXiv2020

Tuning the pull-in instability of soft dielectric elastomers through loading protocols

Pull-in (or electro-mechanical) instability occurs when a drastic decrease in the thickness of a dielectric elastomer results in electrical breakdown, which limits the applications of dielectric devices. Here we derive the criteria for determining the pull-in instability of dielectrics actuated by different loading methods: voltage-control, charge-control, fixed pre-stress and fixed pre-stretch, by analyzing the free energy of the actuated systems. The Hessian criterion identifies a maximum in the loading curve beyond which the elastomer will stretch rapidly and lose stability, and can be seen as a path to failure. We present numerical calculations for neo-Hookean ideal dielectrics, and obtain the maximum allowable actuation stretch of a dielectric before failure by electrical breakdown. We find that applying a fixed pre-stress or a fixed pre-stretch to a charge-driven dielectric may decrease the stretchability of the elastomer, a scenario which is the opposite of what happens in the case of a voltage-driven dielectric. Results show that a reversible large actuation of a dielectric elastomer, free of the pull-in instability, can be achieved by tuning the actuation method.

cond-mat.soft↗
arXiv2020

Modified multiplicative decomposition model for tissue growth: Beyond the initial stress-free state

The multiplicative decomposition model is widely employed for predicting residual stresses and morphologies of biological tissues due to growth. However, it relies on the assumption that the tissue is initially in a stress-free state, which conflicts with the observations that any growth state of tissue is under a significant level of residual stresses that helps to maintain its ideal mechanical conditions. Here, we propose a modified multiplicative decomposition model where the initial state (or reference configuration) of biological tissue is endowed with residual stress instead of being stress-free. Releasing theoretically the initial residual stress, the initially stressed state is first transmitted into a virtual stress-free state, resulting in an initial elastic deformation. The initial virtual stress-free state subsequently grows to another counterpart with a growth deformation and the latter is further integrated into its natural configuration with an excessive elastic deformation that ensures tissue compatibility. With this decomposition, the total deformation may be expressed as the product of elastic deformation, growth deformation and initial elastic deformation, while the corresponding free energy density depends on the initial residual stress and the total deformation. We address three key issues: explicit expression of the free energy density,predetermination of the initial elastic deformation, and initial residual stress. Finally, we consider a tubular organ to demonstrate the effects of the proposed initial residual stress on stress distribution and on shape formation through an incremental stability analysis. Our results suggest that the initial residual stress exerts a major influence on the growth stress and the morphology of tissues.

cond-mat.soft↗
arXiv2020

Electro-mechanically guided growth and patterns

Several experiments have demonstrated the existence of an electro-mechanical effect in many biological tissues and hydrogels, and its actual influence on growth, migration, and pattern formation. Here, to model these interactions and capture some growth phenomena found in Nature, we extend volume growth theory to account for an electro-elasticity coupling. Based on the multiplicative decomposition, we present a general analysis of isotropic growth and pattern formation of electro-elastic solids under external mechanical and electrical fields. As an example, we treat the case of a tubular structure to illustrate an electro-mechanically guided growth affected by axial strain and radial voltage. Our numerical results show that a high voltage can enhance the non-uniformity of the residual stress distribution and induce extensional buckling, while a low voltage can delay the onset of wrinkling shapes and can also generate more complex morphologies. Within a controllable range, axial tensile stretching shows the ability to stabilise the tube and help form more complex 3D patterns, while compressive stretching promotes instability. Both the applied voltage and external axial strain have a significant impact on guiding growth and pattern formation. Our modelling provides a basic tool for analysing the growth of electro-elastic materials, which can be useful for designing a pattern prescription strategy or growth self-assembly in Engineering.

cond-mat.soft↗
arXiv2019

Pattern evolution in bending dielectric-elastomeric bilayers

We propose theoretical and numerical analyses of smart bending deformation of a dielectric-elastic bilayer in response to a voltage, based on the nonlinear theory of electro-elasticity and the associated linearized incremental field theory. We reveal that the mechanism allowing the bending angle of the bilayer can be tuned by adjusting the applied voltage. Furthermore, we investigate how much can the bilayer be bent before it loses its stability by buckling when one of its faces is under too much compression. We find that the physical properties of the two layers must be selected to be of the same order of magnitude to obtain a consequent bending without encountering buckling. If required, the wrinkles can be designed to appear on either the inner or the outer bent surface of the buckled bilayer. We validate the results through comparison with those of the classical elastic problem.

cond-mat.soft↗
arXiv2019

Influence of Initial Residual Stress on Growth and Pattern Creation for a Layered Aorta

Residual stress is ubiquitous and indispensable in most biological and artificial materials, where it sustains and optimizes many biological and functional mechanisms. The theory of volume growth, starting from a stress-free initial state, is widely used to explain the creation and evolution of growth-induced residual stress and the resulting changes in shape, and to model how growing bio-tissues such as arteries and solid tumors develop a strategy of pattern creation according to geometrical and material parameters. This modelling provides promising avenues for designing and directing some appropriate morphology of a given tissue or organ and achieve some targeted biomedical function. In this paper, we rely on a modified, augmented theory to reveal how we can obtain growth-induced residual stress and pattern evolution of a layered artery by starting from an existing, non-zero initial residual stress state. We use experimentally determined residual stress distributions of aged bi-layered human aortas and quantify their influence by a magnitude factor. Our results show that initial residual stress has a more significant impact on residual stress accumulation and the subsequent evolution of patterns than geometry and material parameters. Additionally, we provide an essential explanation for growth-induced patterns driven by differential growth coupled to an initial residual stress. Finally, we show that initial residual stress is a readily available way to control growth-induced pattern creation for tissues and thus may provide a promising inspiration for biomedical engineering.

q-bio.TO↗
arXiv2018

Finite bending and pattern evolution of the associated instability for a dielectric elastomer slab

We investigate the finite bending and the associated bending instability of an incompressible dielectric slab subject to a combination of applied voltage and axial compression, using nonlinear electro-elasticity theory and its incremental version. We first study the static finite bending deformation of the slab. We then derive the three-dimensional equations for the onset of small-amplitude wrinkles superimposed upon the finite bending. We use the surface impedance matrix method to build a robust numerical procedure for solving the resulting dispersion equations and determining the wrinkled shape of the slab at the onset of buckling. Our analysis is valid for dielectrics modeled by a general free energy function. We then present illustrative numerical calculations for ideal neo-Hookean dielectrics. In that case, we provide an explicit treatment of the boundary value problem of the finite bending and derive closed-form expressions for the stresses and electric field in the body. For the incremental deformations, we validate our analysis by recovering existing results in more specialized contexts. We show that the applied voltage has a destabilizing effect on the bending instability of the slab, while the effect of the axial load is more complex: when the voltage is applied, changing the axial loading will influence the true electric field in the body, and induce competitive effects between the circumferential instability due to the voltage and the axial instability due to the axial compression. We even find circumstances where both instabilities cohabit to create two-dimensional patterns on the inner face of the bent sector.

cond-mat.soft↗
arXiv2018

Wrinkles in soft dielectric plates

We show that a smooth giant voltage actuation of soft dielectric plates is not easily obtained in practice. In principle one can exploit, through pre-deformation, the snap-through behavior of their loading curve to deliver a large stretch prior to electric breakdown. However, we demonstrate here that even in this favorable scenario, the soft dielectric is likely to first encounter the plate wrinkling phenomenon, as modeled by the onset of small-amplitude sinusoidal perturbations on its faces. We provide an explicit treatment of this incremental boundary value problem. We also derive closed-form expressions for the two limit cases of very thin membranes (with vanishing thickness) and of thick plates (with thickness comparable to or greater than the wavelength of the perturbation). We treat explicitly examples of ideal dielectric free energy functions (where the mechanical part is of the neo-Hookean, Mooney-Rivlin or Gent form) and of dielectrics exhibiting polarization saturation. Finally we make the link with the classical results of the Hessian electro-mechanical instability criterion and of Euler buckling for an elastic column.

cond-mat.soft↗