Searcharxiv⌕ Search

arXiv subjects

Wen Chen

Publications and source records attributed to Wen Chen.

At least 415 records · Page 23Linked to original sources
arXiv2020

Joint Source and Relay Design for Multi-user MIMO Non-regenerative Relay Networks with Direct Links

In this paper, we investigate joint source precoding matrices and relay processing matrix design for multi-user multiple-input multiple-output~(MU-MIMO) non-regenerative relay networks in the presence of the direct source-destination~(S-D) links. We consider both capacity and mean-squared error~(MSE) criterions subject to the distributed power constraints, which are nonconvex and apparently have no simple solutions. Therefore, we propose an optimal source precoding matrix structure based on the point-to-point MIMO channel technique, and a new relay processing matrix structure under the modified power constraint at relay node, based on which, a nested iterative algorithm of jointly optimizing sources precoding and relay processing is established. We show that the capacity based optimal source precoding matrices share the same structure with the MSE based ones. So does the optimal relay processing matrix. Simulation results demonstrate that the proposed algorithm outperforms the existing results.

eess.SP↗
arXiv2020

Efficient Linear Transmission Strategy for MIMO Relaying Broadcast Channels with Direct Links

In this letter, a novel linear transmission strategy to design the linear precoding matrix~(PM) at base station~(BS) and the beamforming matrix~(BM) at relay station~(RS) for multiple-input multiple-output~(MIMO) relaying broadcast channels with direct channel (DC) is proposed, in which a linear PM is designed at BS based on DC, and the RS utilizes the PM, the backward channel and the forward channel to design the linear BM. We then give a quite tight lower bound of the achievable sum-rate of the network with the proposed strategy to measure the performance. The sum-rates achieved by the proposed strategy is compared with other schemes without considering the DC in design in simulations, which shows that the proposed strategy outperforms the existing methods when RS is close to BS.

eess.SP↗
arXiv2020

A Novel Alternative Optimization Method for Joint Power and Trajectory Design in UAV-Enabled Wireless Network

This letter aims to maximize the average throughput via the joint design of the transmit power and trajectory for unmanned aerial vehicle (UAV)-enabled network. The conventional way to tackle this problem is based on the alternating optimization (AO) method by iteratively updating power and trajectory until convergence, resulting in a non-convex trajectory subproblem which is difficult to deal with. To develop more efficient methods, we propose a novel AO method by incorporating both power and trajectory into an intermediate variable, and then iteratively updating power and the newly introduced variable. This novel variable transformation makes it easier to decompose the original problem into two convex subproblems, namely a throughput maximization subproblem and a feasibility subproblem. Consequently, both of these subproblems can be solved in a globally optimal fashion. We further propose a low-complexity algorithm for the feasibility subproblem by exploiting the alternating directional method of multipliers (ADMM), whose updating step is performed in closed-form solutions. Simulation results demonstrate that our proposed method reduces the computation time by orders of magnitude, while achieving higher performance than the conventional methods.

eess.SP↗
arXiv2020

A Fast Recursive Algorithm for G-STBC

This paper proposes a fast recursive algorithm for Group-wise Space-Time Block Code (G-STBC), which takes full advantage of the Alamouti structure in the equivalent channel matrix to reduce the computational complexity. With respect to the existing efficient algorithms for G-STBC, the proposed algorithm achieves better performance and usually requires less computational complexity.

eess.SP↗
arXiv2020

Design of Convergence-Optimized Non-binary LDPC Codes over Binary Erasure Channel

In this letter, we present a hybrid iterative decoder for non-binary low density parity check (LDPC) codes over binary erasure channel (BEC), based on which the recursion of the erasure probability is derived to design non-binary LDPC codes with convergence-optimized degree distributions. The resulting one-step decoding tree is cycle-free and achieves lower decoding complexity. Experimental studies show that the proposed convergence-optimization algorithm accelerates the convergence process by 33%.

eess.SP↗
arXiv2020

Design of Low Complexity Non-binary LDPC Codes with an Approximated Performance-Complexity Tradeoff

By presenting an approximated performance-complexity tradeoff (PCT) algorithm,a low-complexity non-binary low density parity check (LDPC) code over q-ary-input symmetric-output channel is designed in this manuscript which converges faster than the threshold-optimized non-binary LDPC codes in the low error rate regime. We examine our algorithm by both hard and soft decision decoders.Moreover, simulation shows that the approximated PCT algorithm has accelerated the convergence process by 30% regarding the number of the decoding iterations.

eess.SP↗
arXiv2020

Binary Representaion for Non-binary LDPC Code with Decoder Design

The equivalent binary parity check matrices for the binary images of the cycle-free non-binary LDPC codes have numerous bit-level cycles. In this paper, we show how to transform these binary parity check matrices into their cycle-free forms. It is shown that the proposed methodology can be adopted not only for the binary images of non-binary LDPC codes but also for a large class of binary LDPC codes. Specifically, we present an extended $p$-reducible (EPR) LDPC code structure to eliminate the bit-level cycles. For the non-binary LDPC codes with short length symbol-level cycles, the EPR-LDPC codes can largely avoid the corresponding short length bit-level cycles. As to the decoding of the EPR-LDPC codes, we propose a hybrid hard-decision decoder and a hybrid parallel decoder for binary symmetric channel and binary input Gaussian channel, respectively. A simple code optimization algorithm for these binary decoders is also provided. Simulations show the comparative results and justify the advantages, i.e., better performance and lower decoding complexity, of the proposed binary constructions.

eess.SP↗
arXiv2020

Power Adaptive Network Coding for a Non-Orthogonal Multiple-Access Relay Channel

In this paper we propose a novel power adapted network coding (PANC) for a non-orthogonal multiple-access relay channel (MARC), where two sources transmit their information simultaneously to the destination with the help of a relay. Different from the conventional XOR-based network coding (CXNC), the relay in our PANC generates network coded bits by considering the coefficients of the source-to-relay channels, and forwards each bit with a pre-optimized power level. Specifically, by defining a symbol pair as two symbols from the two sources, we first derive the exact symbol pair error rate (SPER) of the system. Noting that the generations of the exact SPER are complicated due to the irregularity of the decision regions caused by random channel coefficients, we propose a coordinate transform (CT) method to simplify the derivations of the SPER. Next, we prove that with a power scaling factor at relay, our PANC scheme can achieve full diversity gain, i.e., two-order diversity gain, of the system, while the CXNC can only achieve one-order diversity gain due to multi-user interference. In addition, we optimize the power levels at the relay to equivalently minimize the SPER at the destination concerning the relationship between SPER and minimum Euclidean distance of the received constellation. Simulation results show that (1) the SPER derived based on our CT method can well approximate the exact SPER with a much lower complexity; (2) the PANC scheme with power level optimizations and power scaling factor design can achieve full diversity, and obtain a much higher coding gain than the PANC scheme with randomly chosen power levels.

eess.SP↗
arXiv2020

Achieving Optimality in Robust Joint Optimization of Linear Transceiver Design

This paper presents new results on linear transceiver designs in a multiple-input-multiple-output (MIMO) link. By considering the minimal total mean-square error (MSE) criterion, we prove that the robust optimal linear transceiver design has a channel-diagonalizing structure, which verifies the conjecture in the previous work \cite{JW_2011}. Based on this property, the original design problem can be transformed into a scalar problem, whose global optimal solution is first obtained in this work. Simulation results show the performance advantages of our solution over the existing schemes.

eess.SP↗
arXiv2020

Robust Joint Source-Relay-Destination Design Under Per-antenna Power Constraints

This paper deals with joint source-relay-destination beamforming (BF) design for an amplify-and-forward (AF) relay network. Considering the channel state information (CSI) from the relay to the destination is imperfect, we first aim to maximize the worst case received SNR under per-antenna power constraints. The associated optimization problem is then solved in two steps. In the first step, by revealing the rank-one property of the optimal relay BF matrix, we establish the semi-closed form solution of the joint optimal BF design that only depends on a vector variable. Based on this result, in the second step, we propose a low-complexity iterative algorithm to obtain the remaining unknown variable. We also study the problem for minimizing the maximum per-antenna power at the relay while ensuring a received signal-to-noise ratio (SNR) target, and show that it reduces to the SNR maximization problem. Thus the same methods can be applied to solve it. The differences between our result and the existing related work are also discussed in details. In particular, we show that in the perfect CSI case, our algorithm has the same performance but with much lower cost of computational complexity than the existing method. Finally, in the simulation part, we investigate the impact of imperfect CSI on the system performance to verify our analysis.

eess.SP↗
arXiv2020

Achieving Global Optimality for Joint Source and Relay Beamforming Design in Two-Hop Relay Channels

This paper deals with joint source and relay beamforming (BF) design for an amplify-and-forward (AF) multi-antenna multirelay network. Considering that the channel state information (CSI) from relays to destination is imperfect, we aim to maximize the worst case received signal-to-noise ratio (SNR). The associated optimization problem is then solved in two steps. In the first step, by fixing the source BF vector, a semi-closed form solution of the relay BF matrices is obtained, up to a power allocation factor. In the second step, the global optimal source BF vector is obtained based on the Polyblock outer Approximation (PA) algorithm. We also propose two low-complexity methods for obtaining the source BF vector, which are different in their complexities and performances. The optimal joint source-relay BF solution obtained by the proposed algorithms serves as the benchmark for evaluating the existing schemes and the proposed low-complexity methods. Simulation results show that the proposed robust design can significantly reduce the sensitivity of the channel uncertainty to the system performance.

eess.SP↗
arXiv2020

Green MU-MIMO/SIMO Switching for Heterogeneous Delay-aware Services with Constellation Optimization

In this paper, we propose adaptive techniques for multi-user multiple input and multiple output~(MU-MIMO) cellular communication systems, to solve the problem of energy efficient communications with heterogeneous delay-aware traffic. In order to minimize the total transmission power of the MU-MIMO, we investigate the relationship between the transmission power and the M-ary quadrature amplitude modulation~(MQAM) constellation size and get the energy efficient modulation for each transmission stream based on the minimum mean square error~(MMSE) receiver.Since the total power consumption is different for MU-MIMO and multi-user single input and multiple output~(MU-SIMO), by exploiting the intrinsic relationship among the total power consumption model, and heterogeneous delay-aware services, we propose an adaptive transmission strategy, which is a switching between MU-MIMO and MU-SIMO. Simulations show that in order to maximize the energy efficiency and consider different Quality of Service (QoS) of delay for the users simultaneously, the users should adaptively choose the constellation size for each stream as well as the transmission mode.

eess.SP↗
arXiv2020

Compressed Channel Estimation with Position-Based ICI Elimination for High-Mobility SIMO-OFDM Systems

Orthogonal frequency-division multiplexing (OFDM) is widely adopted for providing reliable and high data rate communication in high-speed train systems. However, with the increasing train mobility, the resulting large Doppler shift introduces intercarrier interference (ICI) in OFDM systems and greatly degrades the channel estimation accuracy. Therefore, it is necessary and important to investigate reliable channel estimation and ICI mitigation methods in high-mobility environments. In this paper, we consider a typical HST communication system and show that the ICI caused by the large Doppler shift can be mitigated by exploiting the train position information as well as the sparsity of the conventional basis expansion model (BEM) based channel model. Then, we show that for the complex-exponential BEM (CE-BEM) based channel model, the ICI can be completely eliminated to get the ICI-free pilots at each receive antenna. After that, we propose a new pilot pattern design algorithm to reduce the system coherence and hence can improve the compressed sensing (CS) based channel estimation accuracy. The proposed optimal pilot pattern is independent of the number of receive antennas, the Doppler shifts, the train position, or the train speed. Simulation results confirms the performance merits of the proposed scheme in high-mobility environments. In addition, it is also shown that the proposed scheme is robust to the respect of high mobility.

eess.SP↗
arXiv2020

Compute-and-Forward Network Coding Design over Multi-Source Multi-Relay Channels

Network coding is a new and promising paradigm for modern communication networks by allowing intermediate nodes to mix messages received from multiple sources. Compute-and-forward strategy is one category of network coding in which a relay will decode and forward a linear combination of source messages according to the observed channel coefficients, based on the algebraic structure of lattice codes. The destination will recover all transmitted messages if enough linear equations are received. In this work, we design in a system level, the compute-and-forward network coding coefficients by Fincke-Pohst based candidate set searching algorithm and network coding system matrix constructing algorithm, such that by those proposed algorithms, the transmission rate of the multi-source multi-relay system is maximized. Numerical results demonstrate the effectiveness of our proposed algorithms.

eess.SP↗
arXiv2020

Position Based Compressed Channel Estimation and Pilot Design for High Mobility OFDM Systems

With the development of high speed trains (HST) in many countries, providing broadband wireless services in HSTs is becoming crucial. Orthogonal frequency-division multiplexing (OFDM) has been widely adopted for broadband wireless communications due to its high spectral efficiency. However, OFDM is sensitive to the time selectivity caused by high-mobility channels, which costs large spectrum or time resources to obtain the accurate channel state information (CSI). Therefore, the channel estimation in high-mobility OFDM systems has been a long-standing challenge. In this paper, we first propose a new position-based high-mobility channel model,in which the HST's position information and Doppler shift are utilized to determine the positions of the dominant channel coefficients. %In this way, we can reduce the estimation complexity and to design the transmitted pilot.Then, we propose a joint pilot placement and pilot symbol design algorithm for compressed channel estimation. It aims to reduce the coherence between the pilot signal and the proposed channel model, and hence can improve the channel estimation accuracy. Simulation results demonstrate that the proposed method achieves better performances than existing channel estimation methods over high-mobility channels. Furthermore, we give an example of the designed pilot codebook to show the practical applicability of the proposed scheme.

eess.SP↗
arXiv2020

Position-Based Interference Elimination for High Mobility OFDM Channel Estimation in Multi-cell Systems

Orthogonal frequency-division multiplexing (OFD-M) and multi-cell architecture are widely adopted in current high speed train (HST) systems for providing high data rate wireless communications. In this paper, a typical multi-antenna OFDM HST communication system with multi-cell architecture is considered, where the inter-carrier interference (ICI) caused by high mobility and multi-cell interference (MCI) are both taken into consideration. By exploiting the train position information, a new position-based interference elimination method is proposed to eliminate both the MCI and ICI for a general basis expansion model (BEM). We show that the MCI and ICI can be completely eliminated by the proposed method to get the ICI-free pilots at each receive antenna. In addition, for the considered multi-cell HST system, we develop a low-complexity compressed channel estimation method and consider the optimal pilot pattern design. Both the proposed interference elimination method and the optimal pilot pattern are robust to the train speed and position,as well as the multi-cell multi-antenna system. Simulation results demonstrate the benefits and robustness of the proposed method in the multi-cell HST system.

eess.SP↗
arXiv2020

Optimal Binary/Quaternary Adaptive Signature Design for Code-Division Multiplexing

We consider signature waveform design for synchronous code division multiplexing in the presence of interference and wireless multipath fading channels. The adaptive real/complex signature that maximizes the signal-to-interference-plus-noise ratio (SINR) at the output of the maximum-SINR filter is the minimum-eigenvalue eigenvector of the disturbance autocovariance matrix. In digital communication systems, the signature alphabet is finite and digital signature optimization is NP-hard. In this paper, first we convert the maximum-SINR objective of adaptive binary signature design into an equivalent minimization problem. Then we present an adaptive binary signature design algorithm based on modified Fincke-Pohst (FP) method that achieves the optimal exhaustive search performance with low complexity. In addition, with the derivation of quaternary-binary equivalence, we extend and propose the optimal adaptive signature design algorithm for quaternary alphabet. Numerical results demonstrate the optimality and complexity reduction of our proposed algorithms.

eess.SP↗