arXiv subjects

Wen Chen

Publications and source records attributed to Wen Chen.

At least 145 records · Page 8Linked to original sources

arXiv2025

Design and Analysis of Phase Conjugation-Based Self-Alignment Beamforming for RIS-Assisted Terahertz SWIPT

Terahertz (THz) simultaneous wireless information and power transfer (SWIPT) is a promising technology for enabling ultra-high-rate and low-latency communications in massive battery-free Internet of Things (IoT) deployments for 6G networks. However, conventional THz systems rely on narrow directional beams that necessitate precise alignment, typically achieved through high-overhead beam scanning procedures, which fundamentally at odds with the energy constraints of battery-free IoT devices. In this paper, we propose a novel self-alignment architecture for THz SWIPT leveraging a reconfigurable intelligent surface (RIS) to eliminate complex beam scanning. By integrating phase conjugate circuits at both the base station and user equipment, the RIS facilitates a resonance-based bidirectional retro-reflection mechanism, enabling the system to autonomously converge to an aligned state without manual intervention. We develop an analytical channel transfer model and a power cycle model to characterize the resonance-assisted beam alignment process and power transfer efficiency. Simulation results demonstrate that the RIS-enabled system achieves effective spatial power concentration with significant sidelobe suppression, leading to a communication capacity of 127.84 Gbit/s and a received power of 13.62 mW over a 2.2-meter link.

eess.SP↗

arXiv2025

Virtual-Real Collaborated Split Learning via Model Partitioning in IRS-Assisted IoT Networks

This paper investigates a novel computation and communication co-design framework for large-scale split learning in intelligent reflecting surface (IRS)-assisted internet of things (IoT) networks integrated with digital twin (DT) technique. The considered system consists of a multi-antenna access point (AP), multiple heterogeneous user devices (UDs), and an deployed IRS to enhance both uplink and downlink transmission. The training process of a deep neural network is partitioned between devices and the AP, where a DT replica is activated to replace UDs with insufficient local computation capabilities. We formulate a delay-optimal split learning problem, which optimizes five key variables: layer partitioning points, DT assignment decisions, IRS phase shift matrix, AP downlink power allocation, and DT frequency adjustment, aiming to minimize the overall end-to-end delay under communication and computation. The proposed optimization problem is a highly coupled non-convex mixed-integer problem. Therefore, we solve using an alternating optimization approach combining closed-form updates, semidefinite relaxation (SDR), and low-complexity heuristics. Extensive simulations demonstrate that the proposed scheme significantly reduces training delay compared to conventional baselines and achieves up to 35\% delay improvement, especially under high UD density and stringent power constraints.

eess.SP↗

arXiv2025

Efficient Spectral Efficiency Maximization Design for IRS-aided MIMO Systems

Driven by the growing demand for higher spectral efficiency in wireless communications, intelligent reflecting surfaces (IRS) have attracted considerable attention for their ability to dynamically reconfigure the propagation environment. This work addresses the spectral efficiency maximization problem in IRS-assisted multiple-input multiple-output (MIMO) systems, which involves the joint optimization of the transmit precoding matrix and the IRS phase shift configuration. This problem is inherently challenging due to its non-convex nature. To tackle it effectively, we introduce a computationally efficient algorithm, termed ADMM-APG, which integrates the alternating direction method of multipliers (ADMM) with the accelerated projected gradient (APG) method. The proposed framework decomposes the original problem into tractable subproblems, each admitting a closed-form solution while maintaining low computational complexity. Simulation results demonstrate that the ADMM-APG algorithm consistently surpasses existing benchmark methods in terms of spectral efficiency and computational complexity, achieving significant performance gains across a range of system configurations.

cs.IT↗

arXiv2025

Joint Spatial Registration and Resource Allocation for Transmissive RIS Enabled Cooperative ISCC Networks

In this paper, we propose a novel transmissive reconfigurable intelligent surface (TRIS) transceiver-driven cooperative integrated sensing, computing, and communication (ISCC) network to meet the requirement for a diverse network with low energy consumption. The cooperative base stations (BSs) are equipped with TRIS transceivers to accomplish sensing data acquisition, communication offloading, and computation in a time slot. In order to obtain higher cooperation gain, we utilize a signal-level spatial registration algorithm, which is realized by adjusting the beamwidth. Meanwhile, for more efficient offloading of the computational task, multistream communication is considered, and rank-$N$ constraints are introduced, which are handled using an iterative rank minimization (IRM) scheme. We construct an optimization problem with the objective function of minimizing the total energy consumption of the network to jointly optimize the beamforming matrix, time slot allocation, sensing data allocation and sensing beam scheduling variables. Due to the coupling of the variables, the proposed problem is a non-convex optimization problem, which we decouple and solve using a block coordinate descent (BCD) scheme. Finally, numerical simulation results confirm the superiority of the proposed scheme in improving the overall network performance and reducing the total energy consumption of the network.

cs.IT↗

arXiv2025

Joint Beamforming Design and Resource Allocation for IRS-Assisted Full-Duplex Terahertz Systems

Intelligent reflecting surface (IRS)-assisted full-duplex (FD) terahertz (THz) communication systems have emerged as a promising paradigm to satisfy the escalating demand for ultra-high data rates and spectral efficiency in future wireless networks. However, the practical deployment of such systems presents unique technical challenges, stemming from severe propagation loss, frequency-dependent molecular absorption in the THz band, and the presence of strong residual self-interference (SI) inherent to FD communications. To tackle these issues, this paper proposes a joint resource allocation framework that aims to maximize the weighted minimum rate among all users, thereby ensuring fairness in quality of service. Specifically, the proposed design jointly optimizes IRS reflecting phase shifts, uplink/downlink transmit power control, sub-band bandwidth allocation, and sub-band assignment, explicitly capturing the unique propagation characteristics of THz channels and the impact of residual SI. To strike an balance between system performance and computational complexity, two computationally efficient algorithms are developed under distinct spectrum partitioning schemes: one assumes equal sub-band bandwidth allocation to facilliate tractable optimization, while the other introduces adaptive bandwidth allocation to further enhance spectral utilization and system flexibility. Simulation results validate the effectiveness of the proposed designs and demonstrate that the adopted scheme achieves significant spectral efficiency improvements over benchmark schemes.

cs.IT↗

arXiv2025

Learning-Based Blockage-Resilient Beam Training in Near-Field Terahertz Communications

Terahertz (THz) band is considered a promising candidate to meet the high-throughput requirement for future sixth-generation (6G) wireless communications due to its ultrawide bandwidth. However, due to the high penetration loss at high-frequencies, blockage becomes a serious problem in THz communications, especially in near-field indoor communications with numerous obstacles. To address this issue, this paper investigates blockage-resilient near-field beam training based on self-accelerating Airy beam, which can propagate along a curved trajectory to circumvent obstacles. Specifically, we first analyze the trajectory of the Airy beam and the beam pattern at the receiver using a discrete Fourier transform (DFT) codebook in the presence of obstacles. Interestingly, we reveal that the beam pattern not only captures the receiver's location information but also implicitly encodes the spatial relationship between the receiver and obstacle, which facilitates identifying the optimal Airy beam configuration. Based on this insight, we formulate the blockage-resilient beam training task as a multitask learning problem and propose a lightweight attention-based multi-parameter beam training network (AMPBT-Net) to jointly predict the angle, distance, and curvature parameters of the optimal Airy beam based on the beam pattern. Finally, simulation results demonstrate that the Airy beam effectively mitigates blockage effects and the proposed scheme achieves comparable performance to exhaustive beam sweeping while significantly reducing training overhead.

eess.SP↗

arXiv2025

Multifunctional Wideband Digital Metasurface for Secure Electromagnetic Manipulation in S-Band

Digital metasurfaces have attracted significant attention in recent years due to their ability to manipulate electromagnetic (EM) waves for secure sensing and communication. However, most reported metasurfaces operate at relatively high frequencies, primarily due to the constraints imposed by the physical scale of the dielectric substrate, thus limiting their full-wave system applications. In this work, a wideband digital reflective metasurface is presented for capable of dynamically controlling EM waves, with multifunctional applications in the lower-frequency S-band. The metasurface is composed of electronically reconfigurable meta-atoms with wideband characteristics, and designed by using trapezoidal and M-shaped patches connected by a pin diode. Simulation results show that the proposed digital metasurface could achieve wideband 1-bit phase quantization with a stable phase difference within 180 degree +/- 25 degree and small reflection loss below 0.6 dB from 2.72 to 3.25 GHz. To validate the proposed design, a 20x20-unit metasurface array was designed, simulated and fabricated. By dynamically adjusting the coding sequence, the metasurface could enable multi-mode orbital angular momentum (OAM) beam generation, dynamic beam scanning, and precise direction finding. These capabilities support secure sensing and secure communications through high-resolution target detection and anti-jamming beam steering, as well as physical-layer security. The proposed wideband metasurface may serve as an effective candidate for enhancing spectral efficiency and security performance in radar and wireless systems.

eess.SP↗

arXiv2025

Outage-Aware Sum Rate Maximization in Movable Antennas-Enabled Systems

In this paper, we investigate the movable antennas (MAs)-enabled multiple-input-single-output (MISO) systems, where the base station (BS) equipped with multiple MAs serves multiple single-antenna user. The delay-sensitive scenario is considered, where users refrain from periodically sending training signals to the BS for channel estimations to avoid additional latency. As a result, the BS relies solely on the statistical channel state information (CSI) to transmit data with a fixed rate. Under this setup, we aim to maximize the outage-aware sum rate of all users, by jointly optimizing antenna positions and the transmit beamforming at the BS, while satisfying the given target outage probability requirement at each user. The problem is highly non-convex, primarily because the exact cumulative distribution function (CDF) of the received signal-to-interference-plus-noise ratio (SINR) of each user is difficult to derive. To simplify analysis and without comprising performance, we adopt the statistical CSI based zero-forcing beamforming design. We then introduce one important lemma to derive the tight mean and variance of the SINR. Leveraging these results, we further exploit the Laguerre series approximation to successfully derive the closedform and tight CDF of the SINR. Subsequently, the outageaware sum rate expression is presented but still includes complex structure with respect to antenna positions. Facing this challenge, the projected gradient ascent (PGA) method is developed to iteratively update antenna positions until convergence. Numerical results demonstrate the effectiveness of our proposed schemes compared to conventional fixed-position antenna (FPA) and other competitive benchmarks.

cs.IT↗

arXiv2025

Movable Antenna Enhanced Networked Integrated Sensing and Communication System

Integrated sensing and communication (ISAC) is a key technology for future 6G networks. Most existing studies focus on monostatic and/or bistatic setups with limited coverage and capabilities. Networked ISAC systems with distributed base stations (BSs) can overcome these limitations. Moreover, movable antenna (MA) architectures offer improved ISAC performance over fixed-position antennas (FPAs) by enabling adaptable antenna movement. In this paper, we utilize the MA to promote communication capability with guaranteed sensing performance via jointly designing beamforming, power allocation, receiving filters and position configuration of transmit/receive MA towards maximizing the sum rate for both downlink (DL) and uplink (UL) users. The optimization problem is highly difficult due to the unique channel model derived from the position coefficient of the MA. To resolve this challenge, via leveraging the cutting-the-edge majorization-minimization (MM) method, we develop an efficient solution that optimizes all variables via convex optimization techniques. Extensive simulation results verify the effectiveness of our proposed algorithms and demonstrate the substantial performance promotion by deploying the MA framework in the networked ISAC system.

eess.SP↗

arXiv2025

Active IRS Assisted Joint Uplink and Downlink Communications

In this paper, we investigate an intelligent reflecting surface (IRS) aided wireless communication system, where active IRSs (AIRSs) are deployed to assist communication between a base station (BS) and users of both the uplink (UL) and downlink (DL). We aim to maximize the weighted sum rate (WSR) of UL and DL communications through joint optimization of BS, AIRS beamforming, and AIRS element allocation. First, we study three deployment schemes, namely distributed AIRSs, BS-side AIRS, and user-side AIRS. For distributed AIRSs, both optimal and near-optimal solutions are derived in closed form. To draw useful insights, we analytically compare the deployment schemes in terms of the rate performance under the single-user setup. For the multi-user case, we consider two beamforming setups at the distributed AIRSs to balance performance and complexity tradeoffs. Regarding the user-adaptive AIRS beamforming, different AIRS beamforming vectors are adopted for each user; while for the static AIRS beamforming, all users share the same beamforming vectors, with identical phase shifts but different amplitudes for UL and DL. With the user-adaptive AIRS beamforming, we focus on the optimization of element allocation for rate maximization. With static AIRS beamforming, we solve the rate maximization problem by optimizing the BS transmit/receive beamformers, user beamforming, and AIRS beamforming. Despite its non-convexity, we develop an efficient alternating optimization (AO) based algorithm that solves each sub-problem optimally. Numerical results validate the practical advantages of distributed AIRSs compared to passive IRS (PIRS), BS-side AIRS, and user-side AIRS, and highlight the benefits of dynamic IRS beamforming.

eess.SP↗

arXiv2025

Velocity and Density-Aware RRI Analysis and Optimization for AoI Minimization in IoV SPS

Addressing the problem of Age of Information (AoI) deterioration caused by packet collisions and vehicle speed-related channel uncertainties in Semi-Persistent Scheduling (SPS) for the Internet of Vehicles (IoV), this letter proposes an optimization approach based on Large Language Models (LLM) and Deep Deterministic Policy Gradient (DDPG). First, an AoI calculation model influenced by vehicle speed, vehicle density, and Resource Reservation Interval (RRI) is established, followed by the design of a dual-path optimization scheme. The DDPG is guided by the state space and reward function, while the LLM leverages contextual learning to generate optimal parameter configurations. Experimental results demonstrate that LLM can significantly reduce AoI after accumulating a small number of exemplars without requiring model training, whereas the DDPG method achieves more stable performance after training.

cs.LG↗

arXiv2025

Cooperative Multi-Static ISAC Networks: A Unified Design Framework for Active and Passive Sensing

Multi-static cooperative sensing emerges as a promising technology for advancing integrated sensing and communication (ISAC), enhancing sensing accuracy and range. In this paper, we develop a unified design framework for joint active and passive sensing (JAPS). In particular, we consider a JAPSbased cooperative multi-static ISAC system for coexisting downlink (DL) and uplink (UL) communications. An optimization problem is formulated for maximizing the sum rate of both the DL and UL transmissions via jointly optimizing beamforming, receive filters and power allocation, while guaranteeing the sensing requirements and transmission power constraints. However, the formulated problem is a non-convex optimization problem that is challenging to solve directly due to the tight coupling among optimization variables. To tackle this complicated issue, we employ an efficient algorithm architecture leveraging alternating optimization (AO). Specifically, with the given receive filters and transmission power for UL communication, the transmit beamforming subproblem is addressed by successive convex approximation (SCA)-based and penalty-based algorithms. A fractional programming (FP)-based algorithm is developed to tackle the receive filters and transmission power for UL communication optimization subproblem. Extensive numerical results validate the performance improvement of our proposed JAPS scheme and demonstrate the effectiveness of our proposed algorithms.

eess.SP↗

arXiv2025

Interactive Recommendation Agent with Active User Commands

Traditional recommender systems rely on passive feedback mechanisms that limit users to simple choices such as like and dislike. However, these coarse-grained signals fail to capture users' nuanced behavior motivations and intentions. In turn, current systems cannot also distinguish which specific item attributes drive user satisfaction or dissatisfaction, resulting in inaccurate preference modeling. These fundamental limitations create a persistent gap between user intentions and system interpretations, ultimately undermining user satisfaction and harming system effectiveness. To address these limitations, we introduce the Interactive Recommendation Feed (IRF), a pioneering paradigm that enables natural language commands within mainstream recommendation feeds. Unlike traditional systems that confine users to passive implicit behavioral influence, IRF empowers active explicit control over recommendation policies through real-time linguistic commands. To support this paradigm, we develop RecBot, a dual-agent architecture where a Parser Agent transforms linguistic expressions into structured preferences and a Planner Agent dynamically orchestrates adaptive tool chains for on-the-fly policy adjustment. To enable practical deployment, we employ simulation-augmented knowledge distillation to achieve efficient performance while maintaining strong reasoning capabilities. Through extensive offline and long-term online experiments, RecBot shows significant improvements in both user satisfaction and business outcomes.

cs.IR↗

arXiv2025

Spatiotemporal Raman Probing of Molecular Transport in sub-2-nm Plasmonic Quasi-2D Nanochannels

Capturing molecular dynamics in nanoconfined channels with high spatiotemporal resolution is a key challenge in nanoscience, crucial for advancing catalysis, energy conversion, and molecular sensing. Bottom-up ultrathin plasmonic nanogaps, such as nanoparticle-on-mirror (NPoM) structures, are ideal for ultrasensitive probing due to their extreme light confinement, but their perceived sealed geometry has cast doubt on the existence of accessible transport pathways. Here, counterintuitively, we demonstrate that ubiquitous ligand-capped NPoM-type nanogaps can form a natural quasi-two-dimensional nanochannel, supporting molecular transport over unprecedented length scales ($\gtrsim5$ $μ$m) with an extreme aspect ratio ($>10^3$). Using wavelength-multiplexed Raman spectroscopy, we resolve the underlying centripetal infiltration pathway with a spatial resolving power of $\sim$20 nm. This redefines the NPoM architecture as a sensitive, \textit{in-situ}, all-in-one "transport-and-probe" platform, enabling real-time, reusable monitoring of analyte with $\sim$10$^{-11}$ M. This work establishes a versatile new platform for advancing super-resolved \textit{in-situ} molecular sensing, nanoscale physicochemical studies, and on-chip nanophotofluidics.

physics.optics↗

arXiv2025

Rotatable Antenna Enabled Spectrum Sharing: Joint Antenna Orientation and Beamforming Design

Conventional antenna arrays rely primarily on digital beamforming for spatial control. While adding more elements can narrow beamwidth and suppress interference, such scaling incurs prohibitive hardware and power costs. Rotatable antennas (RAs), which allow mechanical or electronic adjustment of element orientations, introduce a new degree of freedom to exploit spatial flexibility without enlarging the array. By dynamically optimizing orientations, RAs can substantially improve desired link alignment and interference suppression. This paper investigates RA-enabled multiple-input single-output (MISO) interference channels under co-channel spectrum sharing and formulates a weighted sum-rate maximization problem that jointly optimizes transmit beamforming and antenna orientations. To tackle this nonconvex problem, we develop an alternating optimization (AO) framework that integrates weighted minimum mean-square error (WMMSE)-based beamforming with Frank-Wolfe-based orientation updates. To reduce complexity, we further study orientation optimization under maximum-ratio transmission (MRT) and zero-forcing (ZF) beamforming schemes. For finite-resolution actuators, we construct spherical Fibonacci codebooks and design a cross-entropy method (CEM)-based algorithm for discrete orientation selection. Simulations show that integrating RAs with conventional beamforming markedly increases weighted sum-rate, with gains rising with element directivity. Under discrete orientation control, the proposed CEM algorithm consistently outperforms the nearest-projection baseline.

eess.SP↗

arXiv2025

Hierarchical Federated Learning for Social Network with Mobility

Federated Learning (FL) offers a decentralized solution that allows collaborative local model training and global aggregation, thereby protecting data privacy. In conventional FL frameworks, data privacy is typically preserved under the assumption that local data remains absolutely private, whereas the mobility of clients is frequently neglected in explicit modeling. In this paper, we propose a hierarchical federated learning framework based on the social network with mobility namely HFL-SNM that considers both data sharing among clients and their mobility patterns. Under the constraints of limited resources, we formulate a joint optimization problem of resource allocation and client scheduling, which objective is to minimize the energy consumption of clients during the FL process. In social network, we introduce the concepts of Effective Data Coverage Rate and Redundant Data Coverage Rate. We analyze the impact of effective data and redundant data on the model performance through preliminary experiments. We decouple the optimization problem into multiple sub-problems, analyze them based on preliminary experimental results, and propose Dynamic Optimization in Social Network with Mobility (DO-SNM) algorithm. Experimental results demonstrate that our algorithm achieves superior model performance while significantly reducing energy consumption, compared to traditional baseline algorithms.

cs.LG↗

arXiv2025

Wireless Sensing with Movable Intelligent Surface

Future wireless networks are envisioned to deliver not only gigabit communications but also ubiquitous sensing. Reconfigurable intelligent surfaces (RISs) have emerged to reshape radio propagation, recently showing considerable promise for wireless sensing. Still, their per-element electronic tuning incurs prohibitive hardware cost and power consumption. Motivated by the concept of fluid antenna system (FAS), this paper introduces a low-cost movable intelligent surface (MIS) for wireless sensing, which replaces element-wise electronic phase tuning with panel-wise mechanical reconfiguration. The MIS stacks a large fixed and a smaller movable pre-phased metasurface layers, whose differential position shifts synthesize distinct composite phase patterns, enabling multiple beam patterns for multi-target detection. We characterize a MIS-enabled multi-hop echo signal model with multi-target interference and then formulate a worst-case sensing signal-to-interference-plus-noise ratio (SINR) maximization problem that jointly designs MIS phase shifts and schedules MS2's position. A Riemannian Augmented Lagrangian Method (RALM)-based algorithm is developed to solve the formulated mixed-integer non-convex problem. We also derive a heuristic MIS beam steering design with closed-form phase distribution and position scheduling. Simulations validate MIS's beam pattern reconfiguration capability, show that the RALM-based scheme significantly outperforms the closed-form scheme in improving sensing SINR, and uncover a gain-diversity trade-off in beam patterns that informs the optimal choice of MIS configuration.

eess.SP↗

arXiv2025

Towards Communication-efficient Federated Learning via Sparse and Aligned Adaptive Optimization

Adaptive moment estimation (Adam), as a Stochastic Gradient Descent (SGD) variant, has gained widespread popularity in federated learning (FL) due to its fast convergence. However, federated Adam (FedAdam) algorithms suffer from a threefold increase in uplink communication overhead compared to federated SGD (FedSGD) algorithms, which arises from the necessity to transmit both local model updates and first and second moment estimates from distributed devices to the centralized server for aggregation. Driven by this issue, we propose a novel sparse FedAdam algorithm called FedAdam-SSM, wherein distributed devices sparsify the updates of local model parameters and moment estimates and subsequently upload the sparse representations to the centralized server. To further reduce the communication overhead, the updates of local model parameters and moment estimates incorporate a shared sparse mask (SSM) into the sparsification process, eliminating the need for three separate sparse masks. Theoretically, we develop an upper bound on the divergence between the local model trained by FedAdam-SSM and the desired model trained by centralized Adam, which is related to sparsification error and imbalanced data distribution. By minimizing the divergence bound between the model trained by FedAdam-SSM and centralized Adam, we optimize the SSM to mitigate the learning performance degradation caused by sparsification error. Additionally, we provide convergence bounds for FedAdam-SSM in both convex and non-convex objective function settings, and investigate the impact of local epoch, learning rate and sparsification ratio on the convergence rate of FedAdam-SSM. Experimental results show that FedAdam-SSM outperforms baselines in terms of convergence rate (over 1.1$\times$ faster than the sparse FedAdam baselines) and test accuracy (over 14.5\% ahead of the quantized FedAdam baselines).

cs.LG↗