arXiv subjects

Wen Kang

Publications and source records attributed to Wen Kang.

8 recordsLinked to original sources

arXiv2026

Boundary Stabilization for the Rayleigh Beam System under Event-triggered Controls

In this paper, we propose two event-triggered control laws incorporating an eventtriggering mechanism to tackle the boundary stabilization for the Rayleigh beam system. Under this event-triggered controls, a sufficient condition for parameter determination is constructed to guarantee the exponential stability of the closed-loop system by using the integral multiplier technique and energy perturbation method, wherein the desired exponential decay rate can be precisely determined. Numerical examples are presented to demonstrate the efficacy of the event-triggered control methodology.

math.OC↗

arXiv2021

Multi-Features Guidance Network for partial-to-partial point cloud registration

To eliminate the problems of large dimensional differences, big semantic gap, and mutual interference caused by hybrid features, in this paper, we propose a novel Multi-Features Guidance Network for partial-to-partial point cloud registration(MFG). The proposed network mainly includes four parts: keypoints' feature extraction, correspondences searching, correspondences credibility computation, and SVD, among which correspondences searching and correspondence credibility computation are the cores of the network. Unlike the previous work, we utilize the shape features and the spatial coordinates to guide correspondences search independently and fusing the matching results to obtain the final matching matrix. In the correspondences credibility computation module, based on the conflicted relationship between the features matching matrix and the coordinates matching matrix, we score the reliability for each correspondence, which can reduce the impact of mismatched or non-matched points. Experimental results show that our network outperforms the current state-of-the-art while maintaining computational efficiency.

cs.CV↗

arXiv2020

Sampled-data control of 2D Kuramoto-Sivashinsky equation

This paper addresses sampled-data control of 2D Kuramoto-Sivashinsky equation over a rectangular domain. We suggest to divide the 2D rectangular into N sub-domains, where sensors provide spatially averaged or point state measurements to be transmitted through communication network to the controller. Note that differently from 2D heat equation, here we manage with sampled-data control under point measurements. We design a regionally stabilizing controller applied through distributed in space characteristic functions. Sufficient conditions ensuring regional stability of the closed-loop system are established in terms of linear matrix inequalities (LMIs). By solving these LMIs, we find an estimate on the set of initial conditions starting from which the state trajectories of the system are exponentially converging to zero. A numerical example demonstrates the efficiency of the results.

math.AP↗

arXiv2017

Study of the Magnetizing Relationship of the Kickers for CSNS

The extraction system of CSNS mainly consists of two kinds of magnets: eight kickers and one lambertson magnet. In this paper, firstly, the magnetic test results of the eight kickers were introduced and then the filed uniformity and magnetizing relationship of the kickers were given. Secondly, during the beam commissioning in the future, in order to obtain more accurate magnetizing relationship, a new method to measure the magnetizing coefficients of the kickers by the real extraction beam was given and the data analysis would also be processed.

physics.acc-ph↗

arXiv2017

An improved design method for conventional straight dipole magnets

The standard design method for conventional straight dipole magnets is improved in this paper. The good field region is not symmetric with respect to the magnet mechanical center, and its width is not enlarged to include the beam sagitta. The integrated field quality is obtained by integrating the field along nominal beam paths. 2D and 3D design procedures of the improved design method are introduced, and two application examples of straight dipole magnets are presented. It is shown that the differences in integrated field quality between different field integration paths cannot be neglected. Compared with the traditional design method of straight dipole magnets, the advantage of the improved method is that the integrated field quality is accurate; the pole width, magnet dimension and weight of a straight dipole magnet can be reduced.

physics.acc-ph↗

arXiv2017

Boundary control of cascaded ODE-Heat equations under actuator saturation

In this paper, we consider boundary stabilization for a cascade of ODE-heat system with state delay under actuator saturation. To stabilize the system, we design a state feedback controller via the backstepping method and find a bound on the domain of attraction. The latter bound is based on Lyapunov method, whereas the exponential stability of the delayed cascaded systems is proved by using Halanay's inequality. Numerical examples illustrate the efficiency of the method.

math.OC↗

arXiv2016

Design and Measurement of Dipole Magnets for CSNS 1.6GeV RCS

The Rapid Cycling Synchrotron (RCS) in Chinese Spallation Neutron Source (CSNS) accelerates proton beam from 80Mev to 1.6GeV at a repetition rate of 25Hz. All dipole magnets of RCS are operated at AC with biased DC. Aiming at the properties of these dipole magnets, we take some methods to improve magnetic field quality in the good region and reduce eddy currents in the iron core . In this paper, we would present the process of the magnet design and temperature rise calculation. At the same time, the field measurement results and temperature test of the prototype magnet are also described and discussed.

physics.acc-ph↗

arXiv2016

Study on the magnetic measurement results of the injection system for CSNS/RCS

A combination of the H- stripping and phase space painting method is used to accumulate a high intensity beam in the Rapid Cycling Synchrotron (RCS) of the China Spallation Neutron Source (CSNS). The injection system for CSNS/RCS consists of three kinds of magnets: four direct current magnets (BC1-BC4), eight alternating current magnets (BH1-BH4 and BV1-BV4), two septum magnets (ISEP1 and ISEP2). In this paper, the magnetic measurements of the injection system were introduced and the data analysis was processed. The field uniformity and magnetizing curves of these magnets were given, and then the magnetizing fitting equations were obtained.

physics.acc-ph↗