arXiv subjects

Wen-Quan Tao

Publications and source records attributed to Wen-Quan Tao.

12 recordsLinked to original sources

arXiv2025

Improved adjoint lattice Boltzmann method for topology optimization of laminar convective heat transfer

Solving flow-related inverse problems such as topology optimization problems is intricate but significant in various engineering fields. The lattice Boltzmann method (LBM) and the related adjoint method are highly suitable to perform sensitivity analysis in flow-related inverse problems thanks to their strong capability to handle complex structures and excellent parallel scalability. However, the current continuous adjoint LBM shows theoretical inconsistency and poor numerical stability for open flow systems. To solve these issues, the present work develops the fully consistent adjoint boundary conditions from the discrete adjoint LBM. For the first time, the gap between the two adjoint LBMs is unveiled by rigorously deriving both the continuous and discrete adjoint LBMs and comprehensively evaluating their numerical performances in the 2D and 3D pipe bend optimization cases. It is revealed that theoretical inconsistency or singularity exists in the continuous adjoint boundary conditions for open flow systems, corresponding to a much inferior numerical stability of the adjoint solution and an obvious numerical error in sensitivity. Fully consistent adjoint boundary conditions in elegant local form are derived from the discrete adjoint LBM in this work, which can always acquire exact sensitivity results and the theoretically highest numerical stability, with a 10 times higher Reynolds number (Re) achieved while without any increase of computational cost. 3D microchannel heat sinks under various Re are designed, and the esthetic and physically reasonable optimized designs are obtained under various parameter settings, demonstrating the necessity and versatility of the presented discrete adjoint LBM.

math.NA↗

arXiv2024

Multi-fidelity topology optimization of flow boiling heat transfer in microchannels

Topology optimization (TO) is a powerful method to design innovative structures with improved heat transfer performance. In the present study, a multi-fidelity TO method with a delicately defined objective function is developed for flow boiling heat transfer in microchannels. Low-fidelity TO is conducted for the reduced-order process of single-phase laminar convective heat transfer, which generates a set of structure candidates for subsequent high-fidelity evaluation of flow boiling heat transfer. To avoid the possible iteration between the low-fidelity TO and high-fidelity evaluation which leads to inefficient solution of the multi-fidelity TO, distributions of velocity, temperature and two-phase in microchannels with single-phase and/or flow boiling heat transfer are investigated and compared in detail, based on which a new objective function is delicately defined, which can be employed in the low-fidelity TO yet can stand for the performance of the high-fidelity problem. With the help of the new objective function, the efficiency of the multi-fidelity TO is significantly improved and TO structures are designed with hot spots eliminated, thermal resistance reduced and temperature uniformity improved. The present work provides a new method for TO of complicated heat and mass transfer problems. Keywords: topology optimization, flow boiling, multi-fidelity optimization, microchannels, convective heat transfer

physics.flu-dyn↗

arXiv2024

A Novel Paradigm in Solving Multiscale Problems

Multiscale phenomena manifest across various scientific domains, presenting a ubiquitous challenge in accurately and effectively simulating multiscale dynamics in complex systems. In this paper, a novel decoupling solving paradigm is proposed through modelling large-scale dynamics independently and treating small-scale dynamics as a slaved system. A Spectral Physics-informed Neural Network (PINN) is developed to characterize the small-scale system in an efficient and accurate way, addressing the challenges posed by the representation of multiscale dynamics in neural networks. The effectiveness of the method is demonstrated through extensive numerical experiments, including one-dimensional Kuramot-Sivashinsky equation, two- and three-dimensional Navier-Stokes equations, showcasing its versatility in addressing problems of fluid dynamics. Furthermore, we also delve into the application of the proposed approach to more complex problems, including non-uniform meshes, complex geometries, large-scale data with noise, and high-dimensional small-scale dynamics. The discussions about these scenarios contribute to a comprehensive understanding of the method's capabilities and limitations. By enabling the acquisition of large-scale data with minimal computational demands, coupled with the efficient and accurate characterization of small-scale dynamics via Spectral PINN, our approach offers a valuable and promising approach for researchers seeking to tackle multiscale phenomena effectively.

physics.flu-dyn↗

arXiv2019

Predicting Effective Diffusivity of Porous Media from Images by Deep Learning

We report the application of machine learning methods for predicting the effective diffusivity (De) of two-dimensional porous media from images of their structures. Pore structures are built using reconstruction methods and represented as images, and their effective diffusivity is computed by lattice Boltzmann (LBM) simulations. The datasets thus generated are used to train convolutional neural network (CNN) models and evaluate their performance. The trained model predicts the effective diffusivity of porous structures with computational cost orders of magnitude lower than LBM simulations. The optimized model performs well on porous media with realistic topology, large variation of porosity (0.28-0.98), and effective diffusivity spanning more than one order of magnitude (), e.g., >95% of predicted De have truncated relative error of <10% when the true De is larger than 0.2. The CNN model provides better prediction than the empirical Bruggeman equation, especially for porous structure with small diffusivity. The relative error of CNN predictions, however, is rather high for structures with De < 0.1. To address this issue, the porosity of porous structures is encoded directly into the neural network but the performance is enhanced marginally. Further improvement, i.e., 70% of the CNN predictions for structures with true De < 0.1 have relative error <30%, is achieved by removing trapped regions and dead-end pathways using a simple algorithm. These results suggest that deep learning augmented by field knowledge can be a powerful technique for predicting the transport properties of porous media. Directions for future research of machine learning in porous media are discussed based on detailed analysis of the performance of CNN models in the present work.

physics.geo-ph↗

arXiv2016

Performance evaluation of the cavities on nucleate boiling at microscale level

Nucleate boiling heat transfer (NBHT) from enhanced structures is an effective way to dissipate high heat flux. In the present study, the cavities behaviours for nucleation on roughened surface are numerically studied on the entire ebullition cycle based on a phase-change lattice Boltzmann method without introducing any artificial disturbances. The adopted model is firstly validated with the Laplace law and the two phase coexistence curve, and then applied to investigate the effects of cavity structure on NBHT. The bubble departure diameter, departure frequency and total boiling heat flux of an ebullition cycle are also explored. It is demonstrated that the cavity widths and the cavity grooves show significant influence on the features of NBHT. Cavity with circular groove in the present research shows the best performance for NBHT in terms of the averaged heat flux and bubble release frequency. When a specific cavity is combined with other different cavities on roughened surfaces its nucleation process on different roughened surfaces may differ greatly.

physics.flu-dyn↗

arXiv2015

Changes in porosity, permeability and surface area during rock dissolution: effects of mineralogical heterogeneity

Effects of heterogeneity of mineral distribution and reaction rate on the rock dissolution process are investigated using a pore-scale reactive transport model based on the lattice Boltzmann method. Coupled fluid flow, species transport, chemical reaction and solid structure alternation due to dissolution are simulated. Effects of mineral distributions and chemical heterogeneity on the dissolution behaviors and evolutions of hydrologic properties are studied under different reactive transport conditions. Simulation results show that the coupling between advection, diffusion and reaction as well as the mineralogical heterogeneity leads to complex reactive transport behaviors and complicated temporal evolutions of hydrologic properties including porosity, permeability and reactive surface. Diverse relationships between surface area and volume are predicted, which cannot be described by simple models such as the spherical-grain model. Porosity-permeability relationships also differ under different mineral distributions and reactive transport conditions. Simulation results indicate that it is extremely challenging to propose general relationships for hydrologic properties for dissolution of rocks with mineralogical heterogeneity, due to the complicated interactions between reactive transport and mineralogical heterogeneity.

physics.flu-dyn↗

arXiv2015

Numerical Predictions of Effective Thermal Conductivities for Three-dimensional Four-directional Braided Composites Using the Lattice Boltzmann Method

In this paper, a multiple-relaxation-time lattice Boltzmann model with an off-diagonal collision matrix was adopted to predict the effective thermal conductivities of the anisotropic heterogeneous materials whose components are also anisotropic. The half lattice division scheme was adopted to deal with the internal boundaries to guarantee the heat flux continuity at the interfaces. Accuracy of the model was confirmed by comparisons with benchmark results and existing simulation data. The present method was then adopted to numerically predict the transverse and longitudinal effective thermal conductivities of three-dimensional (3D) four-directional braided composites. Some corresponding experiments based on the Hot Disk method were conducted to measure their transverse and longitudinal effective thermal conductivities. The predicted data fit the experiment data well. Influences of fiber volume fractions and interior braiding angles on the effective thermal conductivities of 3D four-directional braided composites were then studied. The results show that a larger fiber volume fraction leads to a larger effective thermal conductivity along the transverse and longitudinal directions; a larger interior braiding angle brings a larger transverse thermal conductivity but a smaller one along the longitudinal direction. It is also shown that for anisotropic materials the periodic boundary condition is different from the adiabatic boundary condition and for periodic microstructure unit cell the periodic boundary condition should be used. Key words: effective thermal conductivities, anisotropic, multi-relaxation-time, lattice Boltzmann method, three-dimensional four-directional braided composites

physics.comp-ph↗

arXiv2015

Investigation of methane adsorption and its effect on gas transport in shale matrix through microscale and mesoscale simulations

Methane adsorption and its effect on fluid flow in shale matrix are investigated through multi-scale simulation scheme by using molecular dynamics (MD) and lattice Boltzmann (LB) methods. Equilibrium MD simulations are conducted to study methane adsorption on the organic and inorganic walls of nanopores in shale matrix with different pore sizes and pressures. Density and pressure distributions within the adsorbed layer and the free gas region are discussed. The illumination of the MD results on larger scale LB simulations is presented. Pressure-dependent thickness of adsorbed layer should be adopted and the transport of adsorbed layer should be properly considered in LB simulations. LB simulations, which are based on a generalized Navier-Stokes equation for flow through low-permeability porous media with slippage, are conducted by taking into consideration the effects of adsorbed layer. It is found that competitive effects of slippage and adsorbed layer exist on the permeability of shale matrix, leading to different changing trends of the apparent permeability.

physics.chem-ph↗

arXiv2014

A generalized lattice Boltzmann model for flow through tight porous media with Klinkenberg's effect

Gas slippage occurs when the mean free path of the gas molecules is in the order of the characteristic pore size of a porous medium. This phenomenon leads to the Klinkenberg's effect where the measured permeability of a gas (apparent permeability) is higher than that of the liquid (intrinsic permeability). A generalized lattice Boltzmann model is proposed for flow through porous media that includes Klinkenberg's effect, which is based on the model of Guo et al. (Z.L. Guo et al., Phys.Rev.E 65, 046308 (2002)). The second-order Beskok and Karniadakis-Civan's correlation (A. Beskok and G. Karniadakis, Microscale Thermophysical Engineering 3, 43-47 (1999), F. Civan, Transp Porous Med 82, 375-384 (2010)) is adopted to calculate the apparent permeability based on intrinsic permeability and Knudsen number. Fluid flow between two parallel plates filled with porous media is simulated to validate model. Simulations performed in a heterogeneous porous medium with components of different porosity and permeability indicate that the Klinkenberg's effect plays significant role on fluid flow in low-permeability porous media, and it is more pronounced as the Knudsen number increases. Fluid flow in a shale matrix with and without fractures is also studied, and it is found that the fractures greatly enhance the fluid flow and the Klinkenberg's effect leads to higher global permeability of the shale matrix.

physics.flu-dyn↗

arXiv2014

Pore-scale simulation of multicomponent multiphase reactive transport with dissolution and precipitation

Multicomponent multiphase reactive transport processes with dissolution-precipitation are widely encountered in energy and environment systems. A pore-scale two-phase multi-mixture model based on the lattice Boltzmann method (LBM) is developed for such complex transport processes, where each phase is considered as a mixture of miscible components in it. The liquid-gas fluid flow with large density ratio is simulated using the multicomponent multiphase pseudo-potential LB model; the transport of certain solute in the corresponding solvent is solved using the mass transport LB model; and the dynamic evolutions of the liquid-solid interface due to dissolution-precipitation are captured by an interface tracking scheme. The model developed can predict coupled multiple physicochemical processes including multiphase flow, multicomponent mass transport, homogeneous reactions in the bulk fluid and heterogeneous dissolution-precipitation reactions at the fluid-solid interface, and dynamic evolution of the solid matrix geometries at the pore-scale. The model is then applied to a physicochemical system encountered in shale gas/oil industry involving multiphase flow, multicomponent reactive transport and dissolution-precipitation, with several reactions whose rates can be several orders of magnitude different at a given temperature. The pore-scale phenomena and complex interaction between different sub-processes are investigated and discussed in detail.

physics.flu-dyn↗

arXiv2014

Nanoscale study of reactive transport in catalyst layer of proton exchange membrane fuel cells with precious and non-precious catalysts using lattice Boltzmann method

High-resolution porous structures of catalyst layer (CL) with multicomponent in proton exchange membrane fuel cells are reconstructed using a reconstruction method called quartet structure generation set. Characterization analyses of nanoscale structures are implemented including pore size distribution, specific area and phase connectivity. Pore-scale simulation methods based on the lattice Boltzmann method are developed and used to predict the macroscopic transport properties including effective diffusivity and proton conductivity. Nonuniform distributions of ionomer in CL generates more tortuous pathway for reactant transport and greatly reduces the effective diffusivity. Tortuosity of CL is much higher than conventional Bruggeman equation adopted. Knudsen diffusion plays a significant role in oxygen diffusion and significantly reduces the effective diffusivity. Reactive transport inside the CL is also investigated. Although the reactive surface area of non-precious metal catalyst (NPMC) CL is much higher than that of Pt CL, the oxygen reaction rate is quite lower in NPMC CL compared with that in Pt CL, due to much lower reaction rate. Micropores (a few nanometers) in NPMC CL although can increase reactive sites, contribute little to enhance the mass transport. Mesopores (few tens of nanometers) or macropores are required to increase the mass transport rate.

physics.flu-dyn↗

arXiv2013

A multiple-relaxation-time lattice Boltzmann model for convection heat transfer in porous media

In this paper, a two-dimensional (2D) multiple-relaxation-time (MRT) lattice Boltzmann (LB) model is developed for simulating convection heat transfer in porous media at the representative elementary volume scale. In the model, a MRT-LB equation is used to simulate the flow field, while another MRT-LB equation is employed to simulate the temperature field. The effect of the porous media is considered by introducing the porosity into the equilibrium moments, and adding a forcing term to the MRT-LB equation of the flow field in the moment space. The present MRT-LB model is validated by numerical simulations of several 2D convection problems in porous media. The numerical results are in good agreement with the well-documented data reported in the literature.

physics.comp-ph↗