arXiv subjects

Wenhang Liu

Publications and source records attributed to Wenhang Liu.

9 recordsLinked to original sources

arXiv2024

Distributed Motion Control of Multiple Mobile Manipulators for Reducing Interaction Wrench in Object Manipulation

In real-world cooperative manipulation of objects, multiple mobile manipulator systems may suffer from disturbances and asynchrony, leading to excessive interaction wrenches and potentially causing object damage or emergency stops. Existing methods often rely on torque control and dynamic models, which are uncommon in many industrial robots and settings. Additionally, dynamic models often neglect joint friction forces and are not accurate. These methods are challenging to implement and validate in physical systems. To address the problems, this paper presents a novel distributed motion control approach aimed at reducing these unnecessary interaction wrenches. The control law is only based on local information and joint velocity control to enhance practical applicability. The communication delays within the distributed architecture are considered. The stability of the control law is rigorously proven by the Lyapunov theorem. In the simulations, the effectiveness is shown, and the impact of communication graph connectivity and communication delays has been studied. A comparison with other methods shows the advantages of the proposed control law in terms of convergence speed and robustness. Finally, the control law has been validated in physical experiments. It does not require dynamic modeling or torque control, and thus is more user-friendly for physical robots.

cs.RO↗

arXiv2024

RHAML: Rendezvous-based Hierarchical Architecture for Mutual Localization

Mutual localization serves as the foundation for collaborative perception and task assignment in multi-robot systems. Effectively utilizing limited onboard sensors for mutual localization between marker-less robots is a worthwhile goal. However, due to inadequate consideration of large scale variations of the observed robot and localization refinement, previous work has shown limited accuracy when robots are equipped only with RGB cameras. To enhance the precision of localization, this paper proposes a novel rendezvous-based hierarchical architecture for mutual localization (RHAML). Firstly, to learn multi-scale robot features, anisotropic convolutions are introduced into the network, yielding initial localization results. Then, the iterative refinement module with rendering is employed to adjust the observed robot poses. Finally, the pose graph is conducted to globally optimize all localization results, which takes into account multi-frame observations. Therefore, a flexible architecture is provided that allows for the selection of appropriate modules based on requirements. Simulations demonstrate that RHAML effectively addresses the problem of multi-robot mutual localization, achieving translation errors below 2 cm and rotation errors below 0.5 degrees when robots exhibit 5 m of depth variation. Moreover, its practical utility is validated by applying it to map fusion when multi-robots explore unknown environments.

cs.RO↗

arXiv2024

Multi-Robot Rendezvous in Unknown Environment with Limited Communication

Rendezvous aims at gathering all robots at a specific location, which is an important collaborative behavior for multi-robot systems. However, in an unknown environment, it is challenging to achieve rendezvous. Previous researches mainly focus on special scenarios where communication is not allowed and each robot executes a random searching strategy, which is highly time-consuming, especially in large-scale environments. In this work, we focus on rendezvous in unknown environments where communication is available. We divide this task into two steps: rendezvous based environment exploration with relative pose (RP) estimation and rendezvous point selection. A new strategy called partitioned and incomplete exploration for rendezvous (PIER) is proposed to efficiently explore the unknown environment, where lightweight topological maps are constructed and shared among robots for RP estimation with very few communications. Then, a rendezvous point selection algorithm based on the merged topological map is proposed for efficient rendezvous for multi-robot systems. The effectiveness of the proposed methods is validated in both simulations and real-world experiments.

cs.RO↗

arXiv2024

Forward Kinematics of Object Transporting by a Multi-Robot System with a Deformable Sheet

We present object handling and transporting by a multi-robot team with a deformable sheet as a carrier. Due to the deformability of the sheet and the high dimension of the whole system, it is challenging to clearly describe all the possible positions of the object on the sheet for a given formation of the multi-robot system. A complete forward kinematics (FK) method is proposed for object handling by an $N$-mobile robot team with a deformable sheet. Based on the virtual variable cables model (VVCM), a constrained quadratic problem (CQP) is formulated by combining the geometric constraints and minimum potential energy conditions of the system. Analytical solutions to the CQP are presented and then further verified with the force closure condition. We present an FK algorithm based on the FK method to obtain all possible solutions with the given initial sheet shape and the robot team formation. We demonstrate the effectiveness, completeness, and efficiency of the FK algorithm with experimental results and case study examples.

cs.RO↗

arXiv2023

A Novel Planning Framework for Complex Flipping Manipulation of Multiple Mobile Manipulators

During complex object manipulation, manipulator systems often face the configuration disconnectivity problem due to closed-chain constraints. Although regrasping can be adopted to get a piecewise connected manipulation, it is a challenging problem to determine whether there is a planning result without regrasping. To address this problem, a novel planning framework is proposed for multiple mobile manipulator systems. Coordinated platform motions and regrasping motions are proposed to enhance configuration connectivity. Given the object trajectory and the grasping pose set, the planning framework includes three steps. First, inverse kinematics for each mobile manipulator is verified along the given trajectory based on different grasping poses. Coverable trajectory segments are determined for each robot for a specific grasping pose. Second, the trajectory choice problem is formulated into a set cover problem, by which we can quickly determine whether the manipulation can be completed without regrasping or with the minimal regrasping number. Finally, the motions of each mobile manipulator are planned with the assigned trajectory segments using existing methods. Both simulations and experimental results show the performance of the planner in complex flipping manipulation. Additionally, the proposed planner can greatly extend the adaptability of multiple mobile manipulator systems in complex manipulation tasks.

cs.RO↗

arXiv2023

FHT-Map: Feature-based Hierarchical Topological Map for Relocalization and Path Planning

Topological maps are favorable for their small storage compared to geometric map. However, they are limited in relocalization and path planning capabilities. To solve this problem, a feature-based hierarchical topological map (FHT-Map) is proposed along with a real-time map construction algorithm for robot exploration. Specifically, the FHT-Map utilizes both RGB cameras and LiDAR information and consists of two types of nodes: main node and support node. Main nodes will store visual information compressed by convolutional neural network and local laser scan data to enhance subsequent relocalization capability. Support nodes retain a minimal amount of data to ensure storage efficiency while facilitating path planning. After map construction with robot exploration, the FHT-Map can be used by other robots for relocalization and path planning. Experiments are conducted in Gazebo simulator, and the results demonstrate that the proposed FHT-Map can effectively improve relocalization and path planning capability compared with other topological maps. Moreover, experiments on hierarchical architecture are implemented to show the necessity of two types of nodes.

cs.RO↗

arXiv2022

A Novel Graph-based Motion Planner of Multi-Mobile Robot Systems with Formation and Obstacle Constraints

Multi-mobile robot systems show great advantages over one single robot in many applications. However, the robots are required to form desired task-specified formations, making feasible motions decrease significantly. Thus, it is challenging to determine whether the robots can pass through an obstructed environment under formation constraints, especially in an obstacle-rich environment. Furthermore, is there an optimal path for the robots? To deal with the two problems, a novel graphbased motion planner is proposed in this paper. A mapping between workspace and configuration space of multi-mobile robot systems is first built, where valid configurations can be acquired to satisfy both formation constraints and collision avoidance. Then, an undirected graph is generated by verifying connectivity between valid configurations. The breadth-first search method is employed to answer the question of whether there is a feasible path on the graph. Finally, an optimal path will be planned on the updated graph, considering the cost of path length and formation preference. Simulation results show that the planner can be applied to get optimal motions of robots under formation constraints in obstacle-rich environments. Additionally, different constraints are considered.

cs.RO↗

arXiv2022

A Novel Semi-Coupled Hierarchical Motion Planning Framework for Cooperative Transportation of Multiple Mobile Manipulators

Multiple mobile manipulators show superiority in the tasks requiring mobility and dexterity compared with a single robot, especially when manipulating/transporting bulky objects. However, closed-chain of the system, redundancy of each mobile manipulator and obstacles in the environment bring challenges to the motion planning problem. In this paper, we propose a novel semi-coupled hierarchical framework (SCHF), which decomposes the problem into two semi-coupled sub-problems.To be specific, the centralized layer plans the object's motion first and then the decentralized layer independently explores the redundancy of each robot in real-time. A notable feature is that the lower bound of the redundancy constraint metric is ensured besides the closed-chain and obstacle-avoidance constraints in the centralized layer, which ensures the object's motion can be executed by each robot in the decentralized layer. Simulated results show that the success rate and time cost of SCHF outperforms the fully centralized planner and fully decoupled hierarchical planner significantly. In addition, cluttered real-world experiments also show the feasibility of the SCHF in the transportation tasks. A video clip in various scenarios can be found at https://youtu.be/Y8ZrnspIuBg.

cs.RO↗

arXiv2022

Multi-Robot Object Transport Motion Planning with a Deformable Sheet

Using a deformable sheet to handle objects is convenient and found in many practical applications. For object manipulation through a deformable sheet that is held by multiple mobile robots, it is a challenging task to model the object-sheet interactions. We present a computational model and algorithm to capture the object position on the deformable sheet with changing robotic team formations. A virtual variable cables model (VVCM) is proposed to simplify the modeling of the robot-sheet-object system. With the VVCM, we further present a motion planner for the robotic team to transport the object in a three-dimensional (3D) cluttered environment. Simulation and experimental results with different robot team sizes show the effectiveness and versatility of the proposed VVCM. We also compare and demonstrate the planning results to avoid the obstacle in 3D space with the other benchmark planner.

cs.RO↗