arXiv subjects

Wenjuan Zhu

Publications and source records attributed to Wenjuan Zhu.

30 records · Page 2Linked to original sources

arXiv2014

Electronic transport and device prospects of monolayer molybdenum disulphide grown by chemical vapour deposition

Layered transition metal dichalcogenides display a wide range of attractive physical and chemical properties and are potentially important for various device applications. Here we report the electronic transport and device properties of monolayer molybdenum disulphide (MoS2) grown by chemical vapour deposition (CVD). We show that these devices have the potential to suppress short channel effects and have high critical breakdown electric field. However, our study reveals that the electronic properties of these devices are at present, severely limited by the presence of a significant amount of band tail trapping states. Through capacitance and ac conductance measurements, we systematically quantify the density-of-states and response time of these states. Due to the large amount of trapped charges, the measured effective mobility also leads to a large underestimation of the true band mobility and the potential of the material. Continual engineering efforts on improving the sample quality are needed for its potential applications.

cond-mat.mes-hall↗

arXiv2013

Photocurrent in graphene harnessed by tunable intrinsic plasmons

Graphene's optical properties in the infrared and terahertz can be tailored and enhanced by patterning graphene into periodic metamaterials with sub-wavelength feature sizes. Here we demonstrate polarization sensitive and gate tunable photodetection in graphene nanoribbon arrays. The long-lived hybrid plasmon-phonon modes utilized are coupled excitations of electron density oscillations and substrate (SiO2) surface polar phonons. Their excitation by s-polarization leads to an in-resonance photocurrent an order of magnitude larger than the photocurrent observed for p-polarization, which excites electron-hole pairs. The plasmonic detectors exhibit photoinduced temperature increases up to four times as large as comparable 2D graphene detectors. Moreover, the photocurrent sign becomes polarization sensitive in the narrowest nanoribbon arrays due to differences in decay channels for photoexcited hybrid plasmon-phonons and electrons. Our work provides a path to light sensitive and frequency selective photodetectors based on graphene's plasmonic excitations.

cond-mat.mes-hall↗

arXiv2013

SOAP3-dp: Fast, Accurate and Sensitive GPU-based Short Read Aligner

To tackle the exponentially increasing throughput of Next-Generation Sequencing (NGS), most of the existing short-read aligners can be configured to favor speed in trade of accuracy and sensitivity. SOAP3-dp, through leveraging the computational power of both CPU and GPU with optimized algorithms, delivers high speed and sensitivity simultaneously. Compared with widely adopted aligners including BWA, Bowtie2, SeqAlto, GEM and GPU-based aligners including BarraCUDA and CUSHAW, SOAP3-dp is two to tens of times faster, while maintaining the highest sensitivity and lowest false discovery rate (FDR) on Illumina reads with different lengths. Transcending its predecessor SOAP3, which does not allow gapped alignment, SOAP3-dp by default tolerates alignment similarity as low as 60 percent. Real data evaluation using human genome demonstrates SOAP3-dp's power to enable more authentic variants and longer Indels to be discovered. Fosmid sequencing shows a 9.1 percent FDR on newly discovered deletions. SOAP3-dp natively supports BAM file format and provides a scoring scheme same as BWA, which enables it to be integrated into existing analysis pipelines. SOAP3-dp has been deployed on Amazon-EC2, NIH-Biowulf and Tianhe-1A.

q-bio.GN↗

arXiv2012

Mid-infrared plasmons in scaled graphene nanostructures

Plasmonics takes advantage of the collective response of electrons to electromagnetic waves, enabling dramatic scaling of optical devices beyond the diffraction limit. Here, we demonstrate the mid-infrared (4 to 15 microns) plasmons in deeply scaled graphene nanostructures down to 50 nm, more than 100 times smaller than the on-resonance light wavelength in free space. We reveal, for the first time, the crucial damping channels of graphene plasmons via its intrinsic optical phonons and scattering from the edges. A plasmon lifetime of 20 femto-seconds and smaller is observed, when damping through the emission of an optical phonon is allowed. Furthermore, the surface polar phonons in SiO2 substrate underneath the graphene nanostructures lead to a significantly modified plasmon dispersion and damping, in contrast to a non-polar diamond-like-carbon (DLC) substrate. Much reduced damping is realized when the plasmon resonance frequencies are close to the polar phonon frequencies. Our study paves the way for applications of graphene in plasmonic waveguides, modulators and detectors in an unprecedentedly broad wavelength range from sub-terahertz to mid-infrared.

cond-mat.mes-hall↗

arXiv2012

Structure and electronic transport in graphene wrinkles

Wrinkling is a ubiquitous phenomenon in two-dimensional membranes. In particular, in the large-scale growth of graphene on metallic substrates, high densities of wrinkles are commonly observed. Despite their prevalence and potential impact on large-scale graphene electronics, relatively little is known about their structural morphology and electronic properties. Surveying the graphene landscape using atomic force microscopy, we found that wrinkles reach a certain maximum height before folding over. Calculations of the energetics explain the morphological transition, and indicate that the tall ripples are collapsed into narrow standing wrinkles by van der Waals forces, analogous to large-diameter nanotubes. Quantum transport calculations show that conductance through these collapsed wrinkle structures is limited mainly by a density-of-states bottleneck and by interlayer tunneling across the collapsed bilayer region. Also through systematic measurements across large numbers of devices with wide folded wrinkles, we find a distinct anisotropy in their electrical resistivity, consistent with our transport simulations. These results highlight the coupling between morphology and electronic properties, which has important practical implications for large-scale high-speed graphene electronics.

cond-mat.mes-hall↗

arXiv2012

Magnetic field tuning of terahertz Dirac plasmons in graphene

Boundaries and edges of a two dimensional system lower its symmetry and are usually regarded, from the point of view of charge transport, as imperfections. Here we present a first study of the behavior of graphene plasmons in a strong magnetic field that provides a different perspective. We show that the plasmon resonance in micron size graphene disks in a strong magnetic field splits into edge and bulk plasmon modes with opposite dispersion relations, and that the edge plasmons at terahertz frequencies develop increasingly longer lifetimes with increasing magnetic field, in spite of potentially more defects close to the graphene edges. This unintuitive behavior is attributed to increasing quasi-one dimensional field-induced confinement and the resulting suppression of the back-scattering. Due to the linear band structure of graphene, the splitting rate of the edge and bulk modes develops a strong doping dependence, which differs from the behavior of traditional semiconductor two-dimensional electron gas (2DEG) systems. We also observe the appearance of a higher order mode indicating an anharmonic confinement potential even in these well-defined circular disks. Our work not only opens an avenue for studying the physics of graphene edges, but also supports the great potential of graphene for tunable terahertz magneto-optical devices.

cond-mat.mes-hall↗

arXiv2012

Manipulating infrared photons using plasmons in transparent graphene superlattices

Superlattices are artificial periodic nanostructures which can control the flow of electrons. Their operation typically relies on the periodic modulation of the electric potential in the direction of electron wave propagation. Here we demonstrate transparent graphene superlattices which can manipulate infrared photons utilizing the collective oscillations of carriers, i.e., plasmons of the ensemble of multiple graphene layers. The superlattice is formed by depositing alternating wafer-scale graphene sheets and thin insulating layers, followed by patterning them all together into 3-dimensional photonic-crystal-like structures. We demonstrate experimentally that the collective oscillation of Dirac fermions in such graphene superlattices is unambiguously nonclassical: compared to doping single layer graphene, distributing carriers into multiple graphene layers strongly enhances the plasmonic resonance frequency and magnitude, which is fundamentally different from that in a conventional semiconductor superlattice. This property allows us to construct widely tunable far-infrared notch filters with 8.2 dB rejection ratio and terahertz linear polarizers with 9.5 dB extinction ratio, using a superlattice with merely five graphene atomic layers. Moreover, an unpatterned superlattice shields up to 97.5% of the electromagnetic radiations below 1.2 terahertz. This demonstration also opens an avenue for the realization of other transparent mid- and far-infrared photonic devices such as detectors, modulators, and 3-dimensional meta-material systems.

cond-mat.mes-hall↗

arXiv2011

Infrared Spectroscopy of Wafer-Scale Graphene

We report on spectroscopy results from the mid- to far-infrared on wafer-scale graphene, grown either epitaxially on silicon carbide, or by chemical vapor deposition. The free carrier absorption (Drude peak) is simultaneously obtained with the universal optical conductivity (due to interband transitions), and the wavelength at which Pauli blocking occurs due to band filling. From these the graphene layer number, doping level, sheet resistivity, carrier mobility, and scattering rate can be inferred. The mid-IR absorption of epitaxial two-layer graphene shows a less pronounced peak at 0.37\pm0.02 eV compared to that in exfoliated bilayer graphene. In heavily chemically-doped single layer graphene, a record high transmission reduction due to free carriers approaching 40% at 250 \mum (40 cm-1) is measured in this atomically thin material, supporting the great potential of graphene in far-infrared and terahertz optoelectronics.

cond-mat.mes-hall↗

arXiv2011

Layer Number Determination and Thickness-dependent Properties of Graphene Grown on SiC

The electronic properties of few-layer graphene grown on the carbon-face of silicon carbide (SiC) are found to be strongly dependent on the number of layers. The carrier mobility is larger in thicker graphene because substrate-related scattering is reduced in the higher layers. The carrier density dependence of the mobility is qualitatively different in thin and thick graphene, with the transition occurring at about 2 layers. The mobility increases with carrier density in thick graphene, similar to multi-layer graphene exfoliated from natural graphite, suggesting that the individual layers are still electrically coupled in spite of reports recording non-Bernal stacking order in C-face grown graphene. The Hall coefficient peak value is reduced in thick graphene due to the increased density of states. A reliable and rapid characterization tool for the layer number is therefore highly desirable. To date, AFM height determination and Raman scattering are typically used since the optical contrast of graphene on SiC is weak. However, both methods suffer from low throughput. We show that the scanning electron microscopy (SEM) contrast can give similar results with much higher throughput.

cond-mat.mes-hall↗

arXiv2010

Silicon nitride gate dielectrics and bandgap engineering in graphene layers

We show that silicon nitride can provide uniform coverage of graphene in field-effect transistors while preserving the channel mobility. This insulator allowed us to study the maximum channel resistance at the Dirac (neutrality) point as a function of the strength of a perpendicular electric field in top-gated devices with different numbers of graphene layers. Using a simple model to account for surface potential variations (electron-hole puddles) near the Dirac point we estimate the field-induced band-gap or band-overlap in the different layers.

cond-mat.mes-hall↗

arXiv2010

Multi-carrier Transport in Epitaxial Multi-layer Graphene

Variable-field Hall measurements were performed on epitaxial graphene grown on Si-face and C-face SiC. The carrier transport involves essentially a single-type of carrier in few-layer graphene, regardless of SiC face. However, in multi-layer graphene (MLG) grown on C-face SiC, the Hall measurements indicated the existence of several groups of carriers with distinct mobilities. Electrical transport in MLG can be properly described by invoking three independent conduction channels in parallel. Two of these are n- and p-type, while the third involves nearly intrinsic graphene. The carriers in this lightly doped channel have significantly higher mobilities than the other two.

cond-mat.mes-hall↗

arXiv2009

Carrier scattering, mobilities and electrostatic potential in mono-, bi- and tri-layer graphenes

The carrier density and temperature dependence of the Hall mobility in mono-, bi- and tri-layer graphene has been systematically studied. We found that as the carrier density increases, the mobility decreases for mono-layer graphene, while it increases for bi-layer/tri-layer graphene. This can be explained by the different density of states in mono-layer and bi-layer/tri-layer graphenes. In mono-layer, the mobility also decreases with increasing temperature primarily due to surface polar substrate phonon scattering. In bi-layer/tri-layer graphene, on the other hand, the mobility increases with temperature because the field of the substrate surface phonons is effectively screened by the additional graphene layer(s) and the mobility is dominated by Coulomb scattering. We also find that the temperature dependence of the Hall coefficient in mono-, bi- and tri-layer graphene can be explained by the formation of electron and hole puddles in graphene. This model also explains the temperature dependence of the minimum conductance of mono-, bi- and tri-layer graphene. The electrostatic potential variations across the different graphene samples are extracted.

cond-mat.mes-hall↗