Searcharxiv⌕ Search

arXiv subjects

Wenwen Zheng

Publications and source records attributed to Wenwen Zheng.

14 recordsLinked to original sources

Superconformal indices and black hole saddles

The AdS/CFT correspondence implies that the superconformal index ${\mathcal I}$ in ${\mathcal N=4}$ SU(N) supersymmetric Yang-Mills theory can be computed using the dual bulk theory. In particular, in the limit of large $N$, the index should be given by a sum over appropriate saddles. However, ${\mathcal I}$ depends on potentials $σ, τ, \vec Δ$ and, at large ${\rm Im}\, τ= {\rm Im}\, σ$, the CFT index ${\mathcal I}$ rapidly approaches $1$ at all values of $N$. As a result, black hole saddles associated with exponentially large contributions in $N$ cannot contribute in this limit. This in particular excludes saddles that were previously suggested to be relevant in such regimes. We thus consider an approach to the bulk path integral motivated by taking it to be defined as an integral over real Lorentz-signature spacetimes with codimension-2 singularities. This approach leads only to saddles that satisfy the above bound, and to the enforcement of this bound via Stokes phenomena. We also find similar results for bulk AdS$_4$ calculations of the ABJM superconformal index.

hep-th↗

Comments on the de Sitter Double Cone

We study the double cone geometry proposed by Saad, Shenker, and Stanford in de Sitter space. We demonstrate that with the inclusion of static patch observers, the double cone leads to a linear ramp consistent with random matrix behavior. This ramp arises from the relative time shift between two clocks located in opposite static patches.

hep-th↗

The Magnified Waltz: Simulating Light Curves of Binary Stars Passing through Micro-Caustics in Strong Lensing Galaxy Clusters

Individual stars located near the caustics of galaxy clusters can undergo extreme magnification when crossing micro-caustics, rendering them observable even at cosmological distances. Though most massive stars are likely reside in binary systems rather than as single star, the influence of binary star system on magnification events is severely under-explored. In this work, we simulate the light curves produced by detached binary stars crossing micro-caustics, aiming to characterize their unique observational signatures.Using high-resolution magnification maps generated by the GPU-PMO-CAUSTIC algorithm and PARSEC stellar models with red-shifted magnitude, we examined the impact of binary star parameters and crossing geometries on microlensing magnification patterns. Our simulations reveal that binary stars produce diverse light curve features, including overlapping peaks, plateau-like structures, and time-variable color-magnitude differences. These features, particularly the distinct temporal variations in spectral energy distributions, offer diagnostic tools for distinguishing binary systems from single stars.We further demonstrate the potential of multi-band photometry using the Chinese Space Station Telescope's Multi-Channel Imager (CSST-MCI) to capture these variations.Our findings provide theoretical support for identifying binary systems in future caustic-crossing events, enabling more accurate characterization of high-redshift stellar populations.

astro-ph.GA↗

Forecast of gravitationally lensed Type Ia supernovae time delay measurement by Muztage-Ata 1.93m Synergy Telescope

Strong lensing time delay measurement is a promising method to address the Hubble tension, offering a completely independent approach compared to both the cosmic microwave background analysis and the local distance ladder. As a third-party examination of the Hubble tension, this method provides a unique perspective. Strongly lensed quasar (glQSO) systems have demonstrated significant potential in tackling this issue, achieving an impressive \(2\%\) accuracy level. However, advancing to \(1\%\) or sub-percent accuracy is challenging due to several intrinsic limitations of glQSOs. Fortunately, strongly lensed supernovae (glSNe) offer a more robust solution, thanks to their characteristic light curve, significant brightness variations, and additional advantages. The Muztagh-Ata 1.93m Synergy Telescope (MOST) is an exceptional instrument for monitoring strong lensing time delays. In this study, we simulate the follow-up multi-band light curve monitoring for glSNe Ia systems, which are expected to be firstly discovered by the Chinese Survey Space Telescope (CSST). Our results show that with \(300s \times 9\) exposures in each epoch, MOST can achieve a signal-to-noise ratio (SNR) of approximately 50 for the brightest images of glSNe Ia, while even the faintest images maintain an SNR of at least 7. Using a standard SNe Ia light curve template for fitting, we measured the time delays. With a 2-day cadence, MOST achieves a time delay error of only a few hours, with the bias typically remaining below one hour. This study highlights the capability of MOST to significantly advance the precision of time delay measurements, offering a promising path toward resolving the Hubble tension.

astro-ph.GA↗

Modeling the variability of memristive devices with hexagonal boron nitride as dielectric

Variability in memristive devices based on h-BN dielectrics is studied in depth. Different numerical techniques to extract the reset voltage are described and the corresponding cycle-to-cycle variability is characterized by means of the coefficient of variance. The charge-flux domain was employed to develop one of the extraction techniques, the calculation of the integrals of current and voltage to obtain the charge and flux allows to minimize the effects of electric noise and the inherent stochasticity of resistive switching on the measurement data. A model to reproduce charge versus flux curves has been successfully employed. The device variability is also described by means of the time series analysis to assess the memory effect along a resistive switching series. Finally, we analyzed I-V curves under ramped voltage stress utilizing a simulator based on circuit breakers, the formation and rupture of the percolation paths that constitute the conductive nanofilaments is studied to describe the set and reset processes behind the resistive switching operation.

cond-mat.mes-hall↗

How to coadd images: II. Anti-aliasing and PSF deconvolution

We have developed a novel method for co-adding multiple under-sampled images that combines the iteratively reweighted least squares and divide-and-conquer algorithms. Our approach not only allows for the anti-aliasing of the images but also enables PSF deconvolution, resulting in enhanced restoration of extended sources, the highest PSNR, and reduced ringing artefacts. To test our method, we conducted numerical simulations that replicated observation runs of the CSST/VST telescope and compared our results to those obtained using previous algorithms. The simulation showed that our method outperforms previous approaches in several ways, such as restoring the profile of extended sources and minimizing ringing artefacts. Additionally, because our method relies on the inherent advantages of least squares fitting, it is more versatile and does not depend on the local uniformity hypothesis for the PSF. However, the new method consumes much more computation than the other approaches.

astro-ph.IM↗

Plasma lensing interpretation of FRB 20201124A bursts at the end of September 2021

When the radio photons propagate through a non-uniform electron density volume, the plasma lensing effect can induce an extreme magnification to the observed flux at certain frequencies. Because the plasma lens acts as a diverging lens, it can extremely suppress the observed flux when aligned with source. These two properties can theoretically cause a highly magnified Fast Radio Burst (FRB) to faint or even disappear for a period of time. In this paper, we interpret that the significant increase in burst counts followed by a sudden quenching in FRB 20201124A in September 2021 can be attributed to plasma lensing. Based on the one-dimensional Gaussian lens model, we search for double main-peak structures in spectra just before its extinction on September 29, 2021. After the de-dispersion and de-scintillation procedures, we find eight bursts with double main-peaks at stable positions. There are three parameters in our modelling, the height and width of the one-dimension Gaussian lens and its distance to the source. We reformulate them as a combined parameter $\mathrm{P}_0 \propto \left ( \frac{a}{\mathrm{AU}}\right )\sqrt{\frac{\mathrm{kpc}}{D_{\mathrm{LS}}} \frac{\mathrm{pc}\;\mathrm{cm}^{-3}}{N_0} }$. The frequency spectra can give an accurate estimation of $\mathrm{P}_0$ corresponding to $\left ( \frac{a}{\mathrm{AU}}\right )\sqrt{\frac{\mathrm{kpc}}{D_{\mathrm{LS}}} \frac{\mathrm{pc}\;\mathrm{cm}^{-3}}{N_0} } \approx 28.118$, while the time of arrival only give a relatively loose constraint on $a^2/D_{\mathrm{LS}}$. Comparing with the observation dynamic spectra, we suggest that for a plasma lens in host galaxy, e.g., $D_{\mathrm{LS}}\approx 1\mathrm{kpc}$, the width of lens can not be larger than $40\mathrm{AU}$. At last, we estimate the relative transverse motion velocity between the lens and source, $v\approx98\left(\frac{a}{\mathrm{AU}}\right)\mathrm{km/s}$.

astro-ph.HE↗

Theoretical Analysis of Random Scattering Induced by Microlensing

Theoretical investigations into the deflection angle caused by microlenses offer a direct path to uncovering principles of the cosmological microlensing effect. This work specifically concentrates on the the probability density function (PDF) of the light deflection angle induced by microlenses. We have made several significant improvements to the widely used formula from Katz et al. First, we update the coefficient from 3.05 to 1.454, resulting in a better fit between the theoretical PDF and our simulation results. Second, we developed an elegant fitting formula for the PDF that can replace its integral representation within a certain accuracy, which is numerically divergent unless arbitrary upper limits are chosen. Third, to facilitate further theoretical work in this area, we have identified a more suitable Gaussian approximation for the fitting formula.

astro-ph.GA↗

Simulation Of The Microlensing Effect Near The Critical Curve Of The Galaxy Cluster

In the smooth mass distribution model, the critical curve represents a line with magnification divergence on the image plane in a strong gravitational lensing system. Considering the microlensing effects caused by discrete masses, the magnification map in the source plane exhibits a complex structure, which offers a promising way for detecting dark matter. However, simulating microlensing near the critical curve poses challenges due to magnification divergence and the substantial computational demands involved. To achieve the required simulation accuracy, direct inverse ray-shooting would require significant computational resources. Therefore we applied a GPU-based code optimized with interpolation method to enable efficient computation on a large scale. Using the GPU of NVIDIA Tesla V100S PCIe 32GB, it takes approximately 7000 seconds to calculate the effects of around 13,000 microlenses for a simulation involving 1013 emitted rays. Then we generated 80 magnification maps, and select 800 light curves for a statistical analysis of microcaustic density and peak magnification.

astro-ph.GA↗

Wave effect of gravitational waves intersected with a microlens field: a new algorithm and supplementary study

The increase in gravitational wave (GW) events has allowed receiving strong lensing image pairs of GWs. However, the wave effect (diffraction and interference) due to the microlens field contaminates the parameter estimation of the image pair, which may lead to a misjudgment of strong lensing signals. To quantify the influence of the microlens field, researchers need a large sample of statistical research. Nevertheless, due to the oscillation characteristic, the Fresnel-Kirchhoff diffraction integral's computational time hinders this aspect's study. Although many algorithms are available, most cannot be well applied to the case where the microlens field is embedded in galaxy/galaxy clusters. This work proposes a faster and more accurate algorithm for studying the wave optics effect of microlenses embedded in different types of strong lensing images. Additionally, we provide a quantitative estimation criterion for the lens plane boundary for the Fresnel-Kirchhoff diffraction integral. This algorithm can significantly facilitate the study of wave optics, particularly in the case of microlens fields embedded in galaxy/galaxy clusters.

astro-ph.CO↗

An Improved GPU-Based Ray-Shooting Code For Gravitational Microlensing

We present an improved inverse ray-shooting code based on GPUs for generating microlensing magnification maps. In addition to introducing GPUs for acceleration, we put the efforts in two aspects: (i) A standard circular lens plane is replaced by a rectangular one to reduce the number of unnecessary lenses as a result of an extremely prolate rectangular image plane. (ii) Interpolation method is applied in our implementation which has achieved an significant acceleration when dealing with large number of lenses and light rays required by high resolution maps. With these applications, we have greatly reduced the running time while maintaining high accuracy: the speed has been increased by about 100 times compared with ordinary GPU based IRS code and GPU-D code when handling large number of lenses. If encountered the high resolution situation up to $10000^2$ pixels, resulting in almost $10^{11}$ light rays, the running time can also be reduced by two orders of magnitude.

astro-ph.IM↗

FRBs Lensed by Point Masses II. The multi-peaked FRBs from the point view of microlensing

The microlensing effect has developed into a powerful technique for a diverse range of applications including exoplanet discoveries, structure of the Milky Way, constraints on MAssive Compact Halo Objects, and measurements of the size and profile of quasar accretion discs. In this paper, we consider a special type of microlensing events where the sources are fast radio bursts with $\sim$milliseconds (ms) durations for which the relative motion between the lens and source is negligible. In this scenario, it is possible to temporally resolve the individual microimages. As a result, a method beyond the inverse ray shooting (IRS) method, which only evaluates the total magnification of all microimages, is needed. We therefore implement an algorithm for identifying individual microimages and computing their magnifications and relative time delays. We validate our algorithm by comparing to analytical predictions for a single microlens case and find excellent agreement. We show that the superposition of pulses from individual microimages produces a light curve that appears as multi-peaked FRBs. The relative time delays between pulses can reach 0.1--1 ms for stellar-mass lenses and hence can already be resolved temporally by current facilities. Although not yet discovered, microlensing of FRBs will become regular events and surpass the number of quasar microlensing events in the near future when $10^{4-5}$ FRBs are expected to be discovered on a daily basis. Our algorithm provides a way of generating the microlensing light curve that can be used for constraining stellar mass distribution in distant galaxies.

astro-ph.GA↗

FRBs Lensed by Point Masses I. Lens Mass Estimation for Doubly Imaged FRBs

Fast radio bursts (FRBs) are bright radio transient events with durations on the order of milliseconds. The majority of FRB sources discovered so far have a single peak, with the exception of a few showing multiple-peaked profiles, the origin of which is unknown. In this work, we show that the strong lensing effect of a point mass or a point mass $+$ external shear on a single-peak FRB can produce double peaks (i.e. lensed images). In particular, the leading peak will always be more magnified and hence brighter than the trailing peak for a point-mass lens model, while the point-mass $+$ external shear lens model can produce a less magnified leading peak. We find that, for a point-mass lens model, the combination of lens mass $M$ and redshift $z_l$ in the form of $M(1+z_l)$ can be directly computed from two observables -- the delayed time $Δt$ and the flux ratio of the leading peak to the trailing peak $R$. For a point-mass $+$ external shear lens model, upper and lower limits in $M(1+z_l)$ can also be obtained from $Δt$ and $R$ for a given external shear strength. In particular, tighter lens mass constraints can be achieved when the observed $R$ is larger. Lastly, we show the process of constraining lens mass using the observed values of $Δt$ and $R$ of two double-peaked FRB sources, i.e. FRB 121002 and FRB 130729, as references, although the double-peaked profiles are not necessarily caused by strong lensing.

astro-ph.GA↗

High Thermoelectric Performance of Au@Sb2Te3 Heterostructure Derived from the Potential Barriers

The correlated couple of electrical and thermal property is the challenge to realize a substantial leap in thermoelectric materials.Synthesis of semiconductor and metal composites is a significant and versatile design strategy to optimize the thermoelectric performance driven by tailored interface between nanoinclusions and matrix.In this study, we present the simultaneous increase of electrical conductivity and Seebeck coefficient, and reduction of thermal conductivity in Sb2Te3-Au system.The enhanced electrical conductivity lies in the incorporated Au nanostructures contributing to injecting carriers to Sb2Te3 matrix.The appropriate barriers originated from the Au-Sb2Te3 interface, which filter low energy carriers, results in enhancement of Seebeck coefficient.The increased boundaries and nanodomains block the transport of phonons, subsequently reducing the thermal conductivity.As a consequence, combination of these effects promote double of ZT value in 1% Au@ Sb2Te3 composites with respect to the pristine Sb2Te3.

physics.app-ph↗