arXiv subjects

Wenyan Ma

Publications and source records attributed to Wenyan Ma.

At least 37 records · Page 2Linked to original sources

arXiv2025

Movable Antenna Enhanced Integrated Sensing and Communication Via Antenna Position Optimization

In this paper, we propose an integrated sensing and communication (ISAC) system aided by the movable-antenna (MA) array, which can improve the communication and sensing performance via flexible antenna movement over conventional fixed-position antenna (FPA) array. First, we consider the downlink multiuser communication, where each user is randomly distributed within a given three-dimensional zone with local movement. To reduce the overhead of frequent antenna movement, the antenna position vector (APV) is designed based on users' statistical channel state information (CSI), so that the antennas only need to be moved in a large timescale. Then, for target sensing, the Cramer-Rao bounds (CRBs) of the estimation mean square error for different spatial angles of arrival (AoAs) are derived as functions of MAs' positions. Based on the above, we formulate an optimization problem to maximize the expected minimum achievable rate among all communication users, with given constraints on the maximum acceptable CRB thresholds for target sensing. An alternating optimization algorithm is proposed to iteratively optimize one of the horizontal and vertical APVs of the MA array with the other being fixed. Numerical results demonstrate that our proposed MA arrays can significantly enlarge the trade-off region between communication and sensing performance compared to conventional FPA arrays with different inter-antenna spacing. It is also revealed that the steering vectors of the designed MA arrays exhibit low correlation in the angular domain, thus effectively reducing channel correlation among communication users to enhance their achievable rates, while alleviating ambiguity in target angle estimation to achieve improved sensing accuracy.

cs.IT↗

arXiv2024

Movable Antenna Enabled Near-Field Communications: Channel Modeling and Performance Optimization

Movable antenna (MA) technology offers promising potential to enhance wireless communication by allowing flexible antenna movement. To maximize spatial degrees of freedom (DoFs), larger movable regions are required, which may render the conventional far-field assumption for channels between transceivers invalid. In light of it, we investigate in this paper MA-enabled near-field communications, where a base station (BS) with multiple movable subarrays serves multiple users, each equipped with a fixed-position antenna (FPA). First, we extend the field response channel model for MA systems to the near-field propagation scenario. Next, we examine MA-aided multiuser communication systems under both digital and analog beamforming architectures. For digital beamforming, spatial division multiple access (SDMA) is utilized, where an upper bound on the minimum signal-to-interference-plus-noise ratio (SINR) across users is derived in closed form. A low-complexity algorithm based on zero-forcing (ZF) is then proposed to jointly optimize the antenna position vector (APV) and digital beamforming matrix (DBFM) to approach this bound. For analog beamforming, orthogonal frequency division multiple access (OFDMA) is employed, and an upper bound on the minimum signal-to-noise ratio (SNR) among users is derived. An alternating optimization (AO) algorithm is proposed to iteratively optimize the APV, analog beamforming vector (ABFV), and power allocation until convergence. For both architectures, we further explore MA design strategies based on statistical channel state information (CSI), with the APV updated less frequently to reduce the antenna movement overhead. Simulation results demonstrate that our proposed algorithms achieve performance close to the derived bounds and also outperform the benchmark schemes using dense or sparse arrays with FPAs.

cs.IT↗

arXiv2024

6D Movable Antenna Enhanced Interference Mitigation for Cellular-Connected UAV Communications

Cellular-connected unmanned aerial vehicle (UAV) communications is an enabling technology to transmit control signaling or payload data for UAVs through cellular networks. Due to the line-of-sight (LoS) dominant air-to-ground channels, efficient interference mitigation is crucial to UAV communications, while the conventional fixed-position antenna (FPA) arrays have limited degrees of freedom (DoFs) to suppress the interference between the UAV and its non-associated co-channel base stations (BSs). To address this challenge, we propose in this letter a new approach by utilizing the six-dimensional movable antenna (6DMA) arrays to enhance the interference mitigation for the UAV. Specifically, we propose an efficient block coordinate descent (BCD) algorithm to iteratively optimize the antenna position vector (APV), array rotation vector (ARV), receive beamforming vector, and associated BS of the UAV to maximize its signal-to-interference-plus-noise ratio (SINR). Numerical results show that the proposed 6DMA enhanced cellular-connected UAV communication can significantly outperform that with the traditional FPA arrays and other benchmark schemes in terms of interference mitigation.

eess.SP↗

arXiv2024

Movable Antenna Enhanced Wireless Sensing Via Antenna Position Optimization

In this paper, we propose a new wireless sensing system equipped with the movable-antenna (MA) array, which can flexibly adjust the positions of antenna elements for improving the sensing performance over conventional antenna arrays with fixed-position antennas (FPAs). First, we show that the angle estimation performance in wireless sensing is fundamentally determined by the array geometry, where the Cramer-Rao bound (CRB) of the mean square error (MSE) for angle of arrival (AoA) estimation is derived as a function of the antennas' positions for both one-dimensional (1D) and two-dimensional (2D) MA arrays. Then, for the case of 1D MA array, we obtain a globally optimal solution for the MAs' positions in closed form to minimize the CRB of AoA estimation MSE. While in the case of 2D MA array, we aim to achieve the minimum of maximum (min-max) CRBs of estimation MSE for the two AoAs with respect to the horizontal and vertical axes, respectively. In particular, for the special case of circular antenna movement region, an optimal solution for the MAs' positions is derived under certain numbers of MAs and circle radii. Thereby, both the lower- and upper-bounds of the min-max CRB are obtained for the antenna movement region with arbitrary shapes. Moreover, we develop an efficient alternating optimization algorithm to obtain a locally optimal solution for MAs' positions by iteratively optimizing one between their horizontal and vertical coordinates with the other being fixed. Numerical results demonstrate that our proposed 1D/2D MA arrays can significantly decrease the CRB of AoA estimation MSE as well as the actual MSE compared to conventional uniform linear arrays (ULAs)/uniform planar arrays (UPAs) with different values of uniform inter-antenna spacing.

cs.IT↗

arXiv2024

Dynamic Beam Coverage for Satellite Communications Aided by Movable-Antenna Array

Due to the ultra-dense constellation, efficient beam coverage and interference mitigation are crucial to low-earth orbit (LEO) satellite communication systems, while the conventional directional antennas and fixed-position antenna (FPA) arrays both have limited degrees of freedom (DoFs) in beamforming to adapt to the time-varying coverage requirement of terrestrial users. To address this challenge, we propose in this paper utilizing movable antenna (MA) arrays to enhance the satellite beam coverage and interference mitigation. Specifically, given the satellite orbit and the coverage requirement within a specific time interval, the antenna position vector (APV) and antenna weight vector (AWV) of the satellite-mounted MA array are jointly optimized over time to minimize the average signal leakage power to the interference area of the satellite, subject to the constraints of the minimum beamforming gain over the coverage area, the continuous movement of MAs, and the constant modulus of AWV. The corresponding continuous-time decision process for the APV and AWV is first transformed into a more tractable discrete-time optimization problem. Then, an alternating optimization (AO)-based algorithm is developed by iteratively optimizing the APV and AWV, where the successive convex approximation (SCA) technique is utilized to obtain locally optimal solutions during the iterations. Moreover, to further reduce the antenna movement overhead, a low-complexity MA scheme is proposed by using an optimized common APV over all time slots. Simulation results validate that the proposed MA array-aided beam coverage schemes can significantly decrease the interference leakage of the satellite compared to conventional FPA-based schemes, while the low-complexity MA scheme can achieve a performance comparable to the continuous-movement scheme.

cs.IT↗

arXiv2024

Modeling and Performance Analysis for Movable Antenna Enabled Wireless Communications

In this paper, we propose a novel antenna architecture called movable antenna (MA) to improve the performance of wireless communication systems. Different from conventional fixed-position antennas (FPAs) that undergo random wireless channel variation, the MAs with the capability of flexible movement can be deployed at positions with more favorable channel conditions to achieve higher spatial diversity gains. To characterize the general multi-path channel in a given region or field where the MAs are deployed, a field-response model is developed by leveraging the amplitude, phase, and angle of arrival/angle of departure (AoA/AoD) information on each of the multiple channel paths under the far-field condition. Based on this model, we then analyze the maximum channel gain achieved by a single receive MA as compared to its FPA counterpart in both deterministic and stochastic channels. First, in the deterministic channel case, we show the periodic behavior of the multi-path channel gain in a given spatial field, which can be exploited for analyzing the maximum channel gain of the MA. Next, in the case of stochastic channels, the expected value of an upper bound on the maximum channel gain of the MA in an infinitely large receive region is derived for different numbers of channel paths. The approximate cumulative distribution function (CDF) for the maximum channel gain is also obtained in closed form, which is useful to evaluate the outage probability of the MA system. Moreover, our results reveal that higher performance gains by the MA over the FPA can be acquired when the number of channel paths increases due to more pronounced small-scale fading effects in the spatial domain. Numerical examples are presented which validate our analytical results and demonstrate that the MA system can reap considerable performance gains over the conventional FPA systems with/without antenna selection (AS).

cs.IT↗

arXiv2024

Movable-Antenna Enhanced Multiuser Communication via Antenna Position Optimization

Movable antenna (MA) is a promising technology to improve wireless communication performance by varying the antenna position in a given finite area at the transceivers to create more favorable channel conditions. In this paper, we investigate the MA-enhanced multiple-access channel (MAC) for the uplink transmission from multiple users each equipped with a single MA to a base station (BS) with a fixed-position antenna (FPA) array. A field-response based channel model is used to characterize the multi-path channel between the antenna array of the BS and each user's MA with a flexible position. To evaluate the MAC performance gain provided by MAs, we formulate an optimization problem for minimizing the total transmit power of users, subject to a minimum-achievable-rate requirement for each user, where the positions of MAs and the transmit powers of users, as well as the receive combining matrix of the BS are jointly optimized. To solve this non-convex optimization problem involving intricately coupled variables, we develop two algorithms based on zero-forcing (ZF) and minimum mean square error (MMSE) combining methods, respectively. Specifically, for each algorithm, the combining matrix of the BS and the total transmit power of users are expressed as a function of the MAs' position vectors, which are then optimized by using the proposed multi-directional descent (MDD) framework. It is shown that the proposed ZF-based and MMSE-based MDD algorithms can converge to high-quality suboptimal solutions with low computational complexities. Simulation results demonstrate that the proposed solutions for MA-enhanced multiple access systems can significantly decrease the total transmit power of users as compared to conventional FPA systems employing antenna selection under both perfect and imperfect field-response information.

cs.IT↗

arXiv2024

Movable Antennas for Wireless Communication: Opportunities and Challenges

Movable antenna (MA) technology is a recent development that fully exploits the wireless channel spatial variation in a confined region by enabling local movement of the antenna. Specifically, the positions of antennas at the transmitter and/or receiver can be dynamically changed to obtain better channel conditions for improving the communication performance. In this article, we first provide an overview of the promising applications for MA-aided wireless communication. Then, we present the hardware architecture and channel characterization for MA systems, based on which the variation of the channel gain with respect to the MA's position is illustrated. Furthermore, we analyze the performance advantages of MAs over conventional fixed-position antennas, in terms of signal power improvement, interference mitigation, flexible beamforming, and spatial multiplexing. Finally, we discuss the main design challenges and their potential solutions for MA-aided communication systems.

cs.IT↗

arXiv2024

Movable-Antenna Array Enhanced Beamforming: Achieving Full Array Gain with Null Steering

Conventional beamforming with fixed-position antenna (FPA) arrays has a fundamental trade-off between maximizing the signal power (array gain) over a desired direction and simultaneously minimizing the interference power over undesired directions. To overcome this limitation, this letter investigates the movable antenna (MA) array enhanced beamforming by exploiting the new degree of freedom (DoF) via antenna position optimization, in addition to the design of antenna weights. We show that by jointly optimizing the antenna positions vector (APV) and antenna weights vector (AWV) of a linear MA array, the full array gain can be achieved over the desired direction while null steering can be realized over all undesired directions, under certain numbers of MAs and null-steering directions. The optimal solutions for AWV and APV are derived in closed form, which reveal that the optimal AWV for MA arrays requires only the signal phase adjustment with a fixed amplitude. Numerical results validate our analytical solutions for MA array beamforming and show their superior performance to the conventional beamforming techniques with FPA arrays.

cs.IT↗

arXiv2024

Performance Analysis and Optimization for Movable Antenna Aided Wideband Communications

Movable antenna (MA) has emerged as a promising technology to enhance wireless communication performance by enabling the local movement of antennas at the transmitter (Tx) and/or receiver (Rx) for achieving more favorable channel conditions. As the existing studies on MA-aided wireless communications have mainly considered narrow-band transmission in flat fading channels, we investigate in this paper the MA-aided wideband communications employing orthogonal frequency division multiplexing (OFDM) in frequency-selective fading channels. Under the general multi-tap field-response channel model, the wireless channel variations in both space and frequency are characterized with different positions of the MAs. Unlike the narrow-band transmission where the optimal MA position at the Tx/Rx simply maximizes the single-tap channel amplitude, the MA position in the wideband case needs to balance the amplitudes and phases over multiple channel taps in order to maximize the OFDM transmission rate over multiple frequency subcarriers. First, we derive an upper bound on the OFDM achievable rate in closed form when the size of the Tx/Rx region for antenna movement is arbitrarily large. Next, we develop a parallel greedy ascent (PGA) algorithm to obtain locally optimal solutions to the MAs' positions for OFDM rate maximization subject to finite-size Tx/Rx regions. To reduce computational complexity, a simplified PGA algorithm is also provided to optimize the MAs' positions more efficiently. Simulation results demonstrate that the proposed PGA algorithms can approach the OFDM rate upper bound closely with the increase of Tx/Rx region sizes and outperform conventional systems with fixed-position antennas (FPAs) under the wideband channel setup.

cs.IT↗

arXiv2023

Multi-Beam Forming with Movable-Antenna Array

Conventional multi-beam forming with fixed-position antenna (FPA) arrays needs to trade-off between maximizing the beamforming gain over desired directions and minimizing the interference power over undesired directions. In this letter, we study the enhanced multi-beam forming with a linear movable-antenna (MA) array by exploiting the new degrees of freedom (DoFs) via antennas' position optimization. Specifically, we jointly optimize the antenna position vector (APV) and antenna weight vector (AWV) to maximize the minimum beamforming gain over multiple desired directions, subject to a given constraint on the maximum interference power over undesired directions. We propose an efficient alternating optimization algorithm to find a suboptimal solution by iteratively optimizing one of the APV and AWV with the other being fixed. Numerical results show that the proposed multi-beam forming design with MA arrays can significantly outperform that with the traditional FPA arrays and other benchmark schemes in terms of both beamforming gain and interference suppression.

cs.IT↗

arXiv2023

Compressed Sensing Based Channel Estimation for Movable Antenna Communications

In this letter, we study the channel estimation for wireless communications with movable antenna (MA), which requires to reconstruct the channel response at any location in a given region where the transmitter/receiver is located based on the channel measurements taken at finite locations therein, so as to find the MA's location for optimizing the communication performance. To reduce the pilot overhead and computational complexity for channel estimation, we propose a new successive transmitter-receiver compressed sensing (STRCS) method by exploiting the efficient representation of the channel responses in the given transmitter/receiver region (field) in terms of multi-path components. Specifically, the field-response information (FRI) in the angular domain, including the angles of departure (AoDs)/angles of arrival (AoAs) and complex coefficients of all significant multi-path components are sequentially estimated based on a finite number of channel measurements taken at random/selected locations by the MA at the transmitter and/or receiver. Simulation results demonstrate that the proposed channel reconstruction method outperforms the benchmark schemes in terms of both pilot overhead and channel reconstruction accuracy.

cs.IT↗

arXiv2022

MIMO Capacity Characterization for Movable Antenna Systems

In this paper, we propose a new multiple-input multiple-output (MIMO) communication system with movable antennas (MAs) to exploit the antenna position optimization for enhancing the capacity. Different from conventional MIMO systems with fixed-position antennas (FPAs), the proposed system can flexibly change the positions of transmit/receive MAs, such that the MIMO channel between them is reconfigured to achieve higher capacity. We aim to characterize the capacity of MA-enabled point-to-point MIMO communication systems, by jointly optimizing the positions of transmit and receive MAs as well as the covariance of transmit signals. First, we develop an efficient alternating optimization algorithm to find a locally optimal solution by iteratively optimizing the transmit covariance matrix and the position of each transmit/receive MA with the other variables being fixed. Next, we propose alternative algorithms of lower complexity for capacity maximization in the low-SNR regime and for the multiple-input single-output (MISO) and single-input multiple-output (SIMO) cases. Numerical results show that our proposed MA systems significantly improve the MIMO channel capacity compared to traditional FPA systems as well as various benchmark schemes, and useful insights are drawn into the capacity gains of MA systems.

cs.IT↗

arXiv2022

Target Sensing with Intelligent Reflecting Surface: Architecture and Performance

Intelligent reflecting surface (IRS) has emerged as a promising technology to reconfigure the radio propagation environment by dynamically controlling wireless signal's amplitude and/or phase via a large number of reflecting elements. In contrast to the vast literature on studying IRS's performance gains in wireless communications, we study in this paper a new application of IRS for sensing/localizing targets in wireless networks. Specifically, we propose a new self-sensing IRS architecture where the IRS controller is capable of transmitting probing signals that are not only directly reflected by the target (referred to as the direct echo link), but also consecutively reflected by the IRS and then the target (referred to as the IRS-reflected echo link). Moreover, dedicated sensors are installed at the IRS for receiving both the direct and IRS-reflected echo signals from the target, such that the IRS can sense the direction of its nearby target by applying a customized multiple signal classification (MUSIC) algorithm. However, since the angle estimation mean square error (MSE) by the MUSIC algorithm is intractable, we propose to optimize the IRS passive reflection for maximizing the average echo signals' total power at the IRS sensors and derive the resultant Cramer-Rao bound (CRB) of the angle estimation MSE. Last, numerical results are presented to show the effectiveness of the proposed new IRS sensing architecture and algorithm, as compared to other benchmark sensing systems/algorithms.

eess.SP↗

arXiv2022

Acquisition of Channel State Information for mmWave Massive MIMO: Traditional and Machine Learning-based Approaches

The accuracy of channel state information (CSI) acquisition directly affects the performance of millimeter wave (mmWave) communications. In this article, we provide an overview on CSI acquisition, including beam training and channel estimation for mmWave massive multiple-input multiple-output systems. The beam training can avoid the estimation of a high-dimension channel matrix while the channel estimation can flexibly exploit advanced signal processing techniques. In addition to introducing the traditional and machine learning-based approaches in this article, we also compare different approaches in terms of spectral efficiency, computational complexity, and overhead.

eess.SP↗

arXiv2020

Machine Learning for Beam Alignment in Millimeter Wave Massive MIMO

This article investigates beam alignment for multi-user millimeter wave (mmWave) massive multi-input multi-output system. Unlike the existing works using machine learning (ML), an alignment method with partial beams using ML (AMPBML) is proposed without any prior knowledge such as user location information. The neural network (NN) for the AMPBML is trained offline using simulated environments according to the mmWave channel model and is then deployed online to predict the beam distribution vector using partial beams. Afterwards, the beams for all users are all aligned simultaneously based on the indices of the dominant entries of the obtained beam distribution vector. Simulation results demonstrate that the AMPBML outperforms the existing methods, including the adaptive compressed sensing, hierarchical search, and multi-path decomposition and recovery, in terms of the total training time slots and the spectral efficiency.

eess.SP↗

arXiv2020

High-Resolution Channel Estimation for Frequency-Selective mmWave Massive MIMO System

In this paper, we develop two high-resolution channel estimation schemes based on the estimating signal parameters via the rotational invariance techniques (ESPRIT) method for frequency-selective millimeter wave (mmWave) massive MIMO systems. The first scheme is based on two-dimensional ESPRIT (TDE), which includes three stages of pilot transmission. This scheme first estimates the angles of arrival (AoA) and angles of departure (AoD) and then pairs the AoA and AoD. The other scheme reduces the pilot transmission from three stages to two stages and therefore reduces the pilot overhead. It is based on one-dimensional ESPRIT and minimum searching (EMS). It first estimates the AoD of each channel path and then searches the minimum from the identified mainlobe. To guarantee the robust channel estimation performance, we also develop a hybrid precoding and combining matrices design method so that the received signal power keeps almost the same for any AoA and AoD. Finally, we demonstrate that the proposed two schemes outperform the existing channel estimation schemes in terms of computational complexity and performance.

eess.SP↗

arXiv2020

Sparse Channel Estimation and Hybrid Precoding Using Deep Learning for Millimeter Wave Massive MIMO

Channel estimation and hybrid precoding are considered for multi-user millimeter wave massive multi-input multi-output system. A deep learning compressed sensing (DLCS) channel estimation scheme is proposed. The channel estimation neural network for the DLCS scheme is trained offline using simulated environments to predict the beamspace channel amplitude. Then the channel is reconstructed based on the obtained indices of dominant beamspace channel entries. A deep learning quantized phase (DLQP) hybrid precoder design method is developed after channel estimation. The training hybrid precoding neural network for the DLQP method is obtained offline considering the approximate phase quantization. Then the deployment hybrid precoding neural network (DHPNN) is obtained by replacing the approximate phase quantization with ideal phase quantization and the output of the DHPNN is the analog precoding vector. Finally, the analog precoding matrix is obtained by stacking the analog precoding vectors and the digital precoding matrix is calculated by zero-forcing. Simulation results demonstrate that the DLCS channel estimation scheme outperforms the existing schemes in terms of the normalized mean-squared error and the spectral efficiency, while the DLQP hybrid precoder design method has better spectral efficiency performance than other methods with low phase shifter resolution.

eess.SP↗