arXiv subjects

Wesley A. Britton

Publications and source records attributed to Wesley A. Britton.

7 recordsLinked to original sources

arXiv2023

Enhanced Nonlinearity of Epsilon-Near-Zero Indium Tin Oxide Nanolayers with Tamm Plasmon-Polariton States

Recently, materials with vanishingly small permittivity, known as epsilon-near-zero (ENZ) media, emerged as promising candidates to achieve nonlinear optical effects of unprecedented magnitude on a solid-state platform. In particular, the ENZ behavior of Indium Tin Oxide (ITO) thin films resulted in Kerr-type nonlinearity with non-perturbative refractive index variations that are key to developing more efficient Si-compatible devices with sub-wavelength dimensions such as all-optical switchers, modulators, and novel photon detectors. In this contribution, we propose and demonstrate enhancement of the nonlinear index variation of 30 nm-thick ITO nanolayers by silicon dioxide/silicon nitride (SiO2/SiN) Tamm plasmon-polariton structures fabricated by radio-frequency magnetron sputtering on transparent substrates under different annealing conditions. In particular, we investigate the linear and nonlinear optical properties of ITO thin films and resonant photonic structures using broadband spectroscopic ellipsometry and intensity dependent Z-scan nonlinear characterization demonstrating enhancement of optical nonlinearity with refractive index variations as large as in the non-perturbative regime. Our study reveals that the efficient excitation of strongly confined plasmon-polariton Tamm states substantially boost the nonlinear optical response of ITO nanolayers providing a stepping stone for the engineering of more efficient infrared devices and nanostructures for a broad range of applications including all-optical data processing, nonlinear spectroscopy, sensing, and novel photodetection modalities.

physics.optics↗

arXiv2022

Inverse design of ultracompact multi-focal optical devices by diffractive neural networks

We propose an efficient inverse design approach for multifunctional optical elements based on adaptive deep diffractive neural networks (a-D$^2$NNs). Specifically, we introduce a-D$^2$NNs and design two-layer diffractive devices that can selectively focus incident radiation over two well-separated spectral bands at desired distances. We investigate focusing efficiencies at two wavelengths and achieve targeted spectral lineshapes and spatial point-spread functions (PSFs) with optimal focusing efficiency. In particular, we demonstrate control of the spectral bandwidths at separate focal positions beyond the theoretical limit of single-lens devices with the same aperture size. Finally, we demonstrate devices that produce super-oscillatory focal spots at desired wavelengths. The proposed method is compatible with current diffractive optics and doublet metasurface technology for ultracompact multispectral imaging and lensless microscopy applications.

physics.optics↗

arXiv2021

Hyperuniform scalar random fields for lensless, multispectral imaging systems

We propose a novel framework for the systematic design of lensless imaging systems based on the hyperuniform random field solutions of nonlinear reaction-diffusion equations from pattern formation theory. Specifically, we introduce a new class of imaging point-spread-functions (PSFs) with enhanced isotropic behavior and controllable sparsity. We investigate the PSFs and the modulated transfer functions (MTFs) for a number of nonlinear models and demonstrate that two-phase isotropic random fields with hyperuniform disorder are ideally suited to construct imaging PSFs with improved performances compared to PSFs based on the Perlin noise. Additionally, we introduce a phase retrieval algorithm based on the non-paraxial Rayleigh-Sommerfeld diffraction theory and introduce diffractive phase plates with PSFs designed from hyperuniform random fields, called hyperuniform phase plates (HPPs). Finally, using high-fidelity object reconstruction, we demonstrate improved image quality using engineered HPPs across the visible range. The proposed framework is suitable for high-performance lensless imaging systems for on-chip microscopy and spectroscopy applications.

physics.optics↗

arXiv2020

Refractory doped titanium nitride nanoscale field emitters

Refractory materials exhibit high damage tolerance, which is attractive for the creation of nanoscale field-emission electronics and optoelectronics applications that require operation at high peak current densities and optical intensities. Recent results have demonstrated that the optical properties of titanium nitride, a refractory and CMOS-compatible plasmonic material, can be tuned by adding silicon and oxygen dopants. However, to fully leverage the potential of titanium (silicon oxy)nitride, a reliable and scalable fabrication process with few-nm precision is needed. In this work, we developed a fabrication process for producing engineered nanostructures with gaps between 10 and 15 nm, aspect ratios larger than 5 with almost 90° steep sidewalls. Using this process, we fabricated large-scale arrays of electrically-connected bow-tie nanoantennas with few-nm free-space gaps. We measured a typical variation of 4 nm in the average gap size. Using applied DC voltages and optical illumination, we tested the electronic and optoelectronic response of the devices, demonstrating sub-10-V tunneling operation across the free-space gaps, and quantum efficiency of up to 1E-3 at 1.2 μm, which is comparable to a bulk silicon photodiode at the same wavelength. Tests demonstrated that the titanium silicon oxynitride nanostructures did not significantly degrade, exhibiting less than 5 nm of shrinking of the average gap dimensions over few-μm^2 areas after roughly 6 hours of operation. Our results will be useful for developing the next generation of robust and CMOS-compatible nanoscale devices for high-speed and low-power field-emission electronics and optoelectronics applications.

physics.app-ph↗

arXiv2020

Design of infrared microspectrometers based on phase-modulated axilenses

We design and characterize a novel axilens-based diffractive optics platform that flexibly combines efficient point focusing and grating selectivity and is compatible with scalable top-down fabrication based on a 4-level phase mask configuration. This is achieved using phase-modulated compact axilens devices that simultaneously focus incident radiation of selected wavelengths at predefined locations with larger focal depths compared to traditional Fresnel lenses. In addition, the proposed devices are polarization insensitive and maintain a large focusing efficiency over a broad spectral band. Specifically, here we discuss and characterize modulated axilens configurations designed for long-wavelength infrared (LWIR) in the $6~μ$m--12~$μ$m wavelength range and in the $4~μ$m--6~$μ$m mid-wavelength infrared (MWIR) range. These devices are ideally suited for monolithic integration atop the substrate layers of infrared focal plane arrays (IR-FPAs) and for use as compact microspectrometers. We systematically study their focusing efficiency, spectral response, and cross talk ratio, and we demonstrate linear control of multi-wavelength focusing on a single plane. Our design method leverages Rayleigh-Sommerfeld (RS) diffraction theory and is validated numerically using the Finite Element Method (FEM). Finally, we demonstrate the application of spatially modulated axilenses to the realization of compact, single-lens spectrometer. By optimizing our devices, we achieve a minimum distinguishable wavelength interval of $Δλ=240nm$ at $λ_0=8μm$ and $Δλ=165nm$ at $λ_0=5μm$. The proposed devices add fundamental spectroscopic capabilities to compact imaging devices for a number of applications ranging from spectral sorting to LWIR and MWIR phase contrast imaging and detection.

physics.optics↗

arXiv2020

Compact dual-band multi-focal diffractive lenses

We design, fabricate, and characterize multifunctional and compact diffractive microlenses with sub-wavelength thickness and the capability to simultaneously focus visible and near-infrared spectral bands at two different focal positions with 24% and 15% measured focusing efficiency, respectively. Our technology utilizes high-index and low-loss sputtered hydrogenated amorphous Si, enabling a sub-wavelength thickness of only 235nm. Moreover, the proposed flat lens concept is polarization insensitive and can be readily designed to operate across any desired wavelength regime. Imaging under broadband illumination with independent focal planes for two targeted spectral bands is experimentally demonstrated, enabling the encoding of the depth information of a sample into different spectral images. In addition, with a small footprint of only 100$μ$m and a minimum feature size of 400nm, the proposed multifunctional and compact diffractive microlenses can be readily integrated with vertical detector arrays to simultaneously concentrate and spectrally select electromagnetic radiation. This provides novel opportunities for spectroscopic and multispectral imaging systems with advanced detector architectures.

physics.optics↗

arXiv2020

Phase-modulated axilenses as ultra-compact spectroscopic tools

We design and characterize phase-modulated, ultra-compact, silicon-based axilens devices that combine efficient point focusing and grating selectivity within scalable 4-level phase mask configurations. The proposed designs are polarization insensitive and maintain a large focusing efficiency over a broad spectral band. Specifically, we select and systematically characterize structures designed for visible and near-infrared (NIR) operation in the $750nm-950nm$ wavelength range. These devices are ideally suited for monolithic integration atop the substrate layers of focal plane arrays (FPAs) for use in multi-band photo-detection and imaging. We demonstrate linear control of multi-wavelength focusing on a single achromatic plane and provide an application consisting of a proof-of-concept ultra-compact single-lens spectrometer with only 300 nm thickness and 70$μm$ diameter, achieving a minimum distinguishable wavelength $Δλ=40nm$ at $λ_0=850nm$. The proposed devices add fundamental spectroscopic capabilities to compact imaging devices for a number of applications ranging from spectral sorting to visible and NIR multispectral imaging and detection.

physics.optics↗