arXiv subjects

Wil Kao

Publications and source records attributed to Wil Kao.

8 recordsLinked to original sources

arXiv2024

Integrated Triply Resonant Electro-Optic Frequency Comb in Lithium Tantalate

Integrated frequency comb generators based on Kerr parametric oscillation have led to chip-scale, gigahertz-spaced combs with new applications spanning hyperscale telecommunications, low-noise microwave synthesis, LiDAR, and astrophysical spectrometer calibration. Recent progress in lithium niobate (LN) photonic integrated circuits (PICs) has resulted in chip-scale electro-optic (EO) frequency combs, offering precise comb-line positioning and simple operation without relying on the formation of dissipative Kerr solitons. However, current integrated EO combs face limited spectral coverage due to the large microwave power required to drive the non-resonant capacitive electrodes and the strong intrinsic birefringence of Lithium Niobate. Here, we overcome both challenges with an integrated triply resonant architecture, combining monolithic microwave integrated circuits (MMICs) with PICs based on the recently emerged thin-film lithium tantalate. With resonantly enhanced EO interaction and reduced birefringence in Lithium Tantalate, we achieve a four-fold comb span extension and a 16-fold power reduction compared to the conventional non-resonant microwave design. Driven by a hybrid-integrated laser diode, the comb spans over 450nm (60THz) with >2000 lines, and the generator fits within a compact 1cm^2 footprint. We additionally observe that the strong EO coupling leads to an increased comb existence range approaching the full free spectral range of the optical microresonator. The ultra-broadband comb generator, combined with detuning-agnostic operation, could advance chip-scale spectrometry and ultra-low-noise millimeter wave synthesis and unlock octave-spanning EO combs. The methodology of co-designing microwave and optical resonators can be extended to a wide range of integrated electro-optics applications.

physics.optics↗

arXiv2023

Bidirectional microwave-optical transduction based on integration of high-overtone bulk acoustic resonators and photonic circuits

Coherent interconversion between microwave and optical frequencies can serve as both classical and quantum interfaces for computing, communication, and sensing. Here, we present a compact microwave-optical transducer based on monolithic integration of piezoelectric actuators atop silicon nitride photonic circuits. Such an actuator directly couples microwave signals to a high-overtone bulk acoustic resonator defined by the suspended silica cladding of the optical waveguide core, which leads to enhanced electromechanical and optomechanical couplings. At room temperature, this triply resonant piezo-optomechanical transducer achieves an off-chip photon number conversion efficiency of -48 dB over a bandwidth of 25 MHz at an input pump power of 21 dBm. The approach is scalable in manufacturing and, unlike existing electro-optic transducers, does not rely on superconducting resonators. As the transduction process is bidirectional, we further demonstrate synthesis of microwave pulses from a purely optical input. Combined with the capability of leveraging multiple acoustic modes for transduction, the present platform offers prospects for building frequency-multiplexed qubit interconnects and for microwave photonics at large.

quant-ph↗

arXiv2023

Lithium tantalate electro-optical photonic integrated circuits for high volume manufacturing

Photonic integrated circuits based on Lithium Niobate have demonstrated the vast capabilities afforded by material with a high Pockels coefficient, allowing linear and high-speed modulators operating at CMOS voltage levels for applications ranging from data-center communications and photonic accelerators for AI. However despite major progress, the industrial adoption of this technology is compounded by the high cost per wafer. Here we overcome this challenge and demonstrate a photonic platform that satisfies the dichotomy of allowing scalable manufacturing at low cost, while at the same time exhibiting equal, and superior properties to those of Lithium Niobate. We demonstrate that it is possible to manufacture low loss photonic integrated circuits using Lithium Tantalate, a material that is already commercially adopted for acoustic filters in 5G and 6G. We show that LiTaO3 posses equally attractive optical properties and can be etched with high precision and negligible residues using DUV lithography, diamond like carbon (DLC) as a hard mask and alkaline wet etching. Using this approach we demonstrate microresonators with an intrinsic cavity linewidth of 26.8 MHz, corresponding to a linear loss of 5.6 dB/m and demonstrate a Mach Zehnder modulator with Vpi L = 4.2 V cm half-wave voltage length product. In comparison to Lithium Niobate, the photonic integrated circuits based on LiTaO3 exhibit a much lower birefringence, allowing high-density circuits and broadband operation over all telecommunication bands (O to L band), exhibit higher photorefractive damage threshold, and lower microwave loss tangent. Moreover, we show that the platform supports generation of soliton microcombs in X-Cut LiTaO3 racetrack microresonator with electronically detectable repetition rate, i.e. 30.1 GHz.

physics.optics↗

arXiv2020

Creating quantum many-body scars through topological pumping of a 1D dipolar gas

Quantum many-body scars, long-lived excited states of correlated quantum chaotic systems that evade thermalization, are of great fundamental and technological interest. We create novel scar states in a bosonic 1D quantum gas of dysprosium by stabilizing a super-Tonks-Girardeau gas against collapse and thermalization with repulsive long-range dipolar interactions. Stiffness and energy density measurements show that the system is dynamically stable regardless of contact interaction strength. This enables us to cycle contact interactions from weakly to strongly repulsive, then strongly attractive, and finally weakly attractive. We show that this cycle is an energy-space topological pump (due to a quantum holonomy). Iterating this cycle offers an unexplored topological pumping method to create a hierarchy of quantum many-body scar states.

cond-mat.quant-gas↗

arXiv2018

Thermalization near integrability in a dipolar quantum Newton's cradle

Isolated quantum many-body systems with integrable dynamics generically do not thermalize when taken far from equilibrium. As one perturbs such systems away from the integrable point, thermalization sets in, but the nature of the crossover from integrable to thermalizing behavior is an unresolved and actively discussed question. We explore this question by studying the dynamics of the momentum distribution function in a dipolar quantum Newton's cradle consisting of highly magnetic dysprosium atoms. This is accomplished by creating the first one-dimensional Bose gas with strong magnetic dipole-dipole interactions. These interactions provide tunability of both the strength of the integrability-breaking perturbation and the nature of the near-integrable dynamics. We provide the first experimental evidence that thermalization close to a strongly interacting integrable point occurs in two steps: prethermalization followed by near-exponential thermalization. Exact numerical calculations on a two-rung lattice model yield a similar two-timescale process, suggesting that this is generic in strongly interacting near-integrable models. Moreover, the measured thermalization rate is consistent with a parameter-free theoretical estimate, based on identifying the types of collisions that dominate thermalization. By providing tunability between regimes of integrable and nonintegrable dynamics, our work sheds light both on the mechanisms by which isolated quantum many-body systems thermalize, and on the temporal structure of the onset of thermalization.

cond-mat.quant-gas↗

arXiv2018

Tuning the dipole-dipole interaction in a quantum gas with a rotating magnetic field

We demonstrate the tuning of the magnetic dipole-dipole interaction (DDI) within a dysprosium Bose-Einstein condensate by rapidly rotating the orientation of the atomic dipoles. The tunability of the dipolar mean-field energy manifests as a modified gas aspect ratio after time-of-flight expansion. We demonstrate that both the magnitude and the sign of the DDI can be tuned using this technique. In particular, we show that a magic rotation angle exists at which the mean-field DDI can be eliminated, and at this angle, we observe that the expansion dynamics of the condensate is close to that predicted for a non-dipolar gas. The ability to tune the strength of the DDI opens new avenues toward the creation of exotic soliton and vortex states as well as unusual quantum lattice phases and Weyl superfluids.

cond-mat.quant-gas↗

arXiv2016

Anisotropic dependence of tune-out wavelength near Dy 741-nm transition

We report the first measurement of a tune-out wavelength for ground-state bosonic Dy and linearly polarized light. The tune-out wavelength measured is near the narrow-line 741-nm transition in $^{162}$Dy, and is the wavelength at which the total Stark shift of the ground state vanishes. We find that it strongly depends on the relative angle between the optical field and quantization axis due to Dy's large tensor polarizability. This anisotropy provides a wide, 22-GHz tunability of the tune-out frequency for linearly polarized light, in contrast to Rb and Cs whose near-infrared tune-out wavelengths do not exhibit large anisotropy. The measurements of the total light shift are performed by measuring the contrast of multipulse Kapitza-Dirac diffraction. The calculated wavelengths are within a few GHz of the measured values using known Dy electronic transition data. The lack of hyperfine structure in bosonic Dy implies that the tune-out wavelengths for the other bosonic Dy isotopes should be related to this $^{162}$Dy measurement by the known isotope shifts.

physics.atom-ph↗

arXiv2016

Photometric variability of candidate white dwarf binary systems from Palomar Transient Factory archival data

We present a sample of 59 periodic variables from the Palomar Transient Factory, selected from published catalogues of white dwarf (WD) candidates. The variability can likely be attributed to ellipsoidal variation of the tidally distorted companion induced by the gravity of the primary (WD or hot subdwarf) or to the reflection of hot emission by a cooler companion. We searched 11311 spectroscopically or photometrically selected WD candidates from three hot star/WD catalogues, using the Lomb-Scargle periodogram to single out promising sources. We present period estimates for the candidates, 45 of which were not previously identified as periodic variables, and find that most have a period shorter than a few days. Additionally, we discuss the eclipsing systems in our sample and present spectroscopic data on selected sources.

astro-ph.SR↗